Problems upgrading to Windows 10 Iconia Tab 8 W

Similar Questions

• Pavilion DM1: Problems upgrading to Windows 10 on HP Pavilion DM1 Notebook

  The portable computer is currently running Windows 7 Professional, and I ran the upgrade of Windows 10.  It goes through the first installation and re - start and then on the second phase, when it is installing the drivers, it gets to 71% and restarts with a blue screen, I think that showing as TENT RUN OF No. EXECUTE MEMORY, but it is not very long, so I do not know and rolls to Windows 7.  I tried to disconnect external devices, try a clean boot, tried to update all the drivers, disable wifi and leaving on a single connection to the local network without success.  I managed to last updated desktop for Windows 10 with only a little difficulty even if Windows has decided the display driver is not compatible, so it is a real headache.

  Thank you. No, Kaspersky has not been installed, and I never installed it. Is used by McAfee, as sometimes it comes with Acrobat Reader? I installed once in an update and it removed immediately. Anyway, I found this file registered twice in C:\Windows\System32\Drivers and in a subfolder, it was not related to any existing process so I removed it, tried the upgrade again and he completed this time. If for any other person having this problem find the name of the file after ATTEMPTED RUN OF No. EXECUTE the MEMORY when the blue screen appears, which is very short and then delete this file. In my case it was kl1.sys. It was not however reflected in the report which appeared after system restored to Windows 7. Problem solved.

• Difficult problem upgrading Vista/Windows 7 for anyone who dares to try to help me to solve it. PLEASE HELP ME UNDERSTAND THIS!

  My computer is a few years old, but has always been a good thing. I have a Gateway P6831FX laptop. It came with Vista pre-installed, but also many devices hardware upgrade card high quality graphics, monitor, sound system, etc. because it was built for the high-quality games.  Unfortunately, my OS system crashed and the computer did not come with recovery discs (gateway said that I should order the discs on their part and that I had to pay for them. Which shocked me because when I bought the computer I paid for a license to the BONE so you would think they would send the recovery discs I free).  However, I recently bought a disc to upgrade to windows 7 because I was planning on upgrading my system before it crashed.  So with a computer, I couldn't use, I thought that I had nothing to lose and I decided to try to load my system windows 7 on the computer.  I put the disc in the drive and load windows 7 with no problems at all.  I don't know if I've checked all the right boxes when he asked all sorts of questions, but my big computer worked when I was tired.  I had to go online and download the driver for the webcam to webcam would work once again and I lost all programs preloaded but other than that everything seems to work fine.  But then all of a sudden the sound no longer works.  I turned off the computer and turn it back on and the sound was back on.  But a few hours later, the noise stopped working again and it keeps going.  It is when I reboot it, but it is becoming a chore.  I decided that I would try to fix it and I went into the Device Manager and I discovered something to worry about. All original equipment upgraded in the computer is no longer registered.  All that was there was listed as generic devices Microsoft and number of manufacturer information and model said: not available. The monitor, for example, is listed as 'No generic PnP Monitor'.  Everything updated, so that I paid extra watch now simply known as generic peripheral windows (with a date of installation date that I loaded windows 7).

  Is there anyway to retrieve the updated materials and programs without having to order and pay for the vista recovery discs?  If I have to, I'll have to erase windows 7 then reload vista with recovery disks and then reload again the upgrade to windows 7?  However, one thing that baffles me is that when I pull my hard drive it shows that I have 2 here.  It shows 1 Partition (C) and (D) recovery so I think that my original vista system with the hardware upgraded and programs is still in my computer somewhere in the recovery disc (D) but I can not understand how to access and I tried.  And if for some reason any I can never access or recover, I would like at least to remove it because it takes up a ton of space on my hard drive.  If anyone can understand what I'm trying to say here, that's where somehow you can help me understand cela stuff?  Thank you for your time.

  Hello

  Gateway put a recovery Partition on your hard disk to reinstall Vista from rather than providing records.

  It's the way it's done now and you are also supposed to make recovery disc from it, that you can not do until you reinstall Vista now.

  If the recovery Partition: D still works, we do not know as you have installation, etc. on this laptop.

  You need to try.

  Reinstall Vista > and then upgrade to Windows 7.

  .

  Here is the information on the bridge for learn you more about reinstalling Vista.

  Full factory for the gateway restore, which you will always be able to use...

  https://support.gateway.com/s/software/Microsof/Vista/7515418/7515418su531.shtml

  And once you reinstall Vista you go to the site of the bridge or from the hardware manufacturer (that you upgraded material initially) Support Web site > download drivers and software Section > equip your laptop model number or the hardware and operating system > and download the latest drivers for the notebook hardware.

  http://support.gateway.com/product/?cmpid=supportnav

  And also when Windows 7 is installed then you will need to go to this same site gateway or the hardware manufacturer (that you upgraded material initially) and download the latest Windows 7 drivers for it also.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If the recovery partition is damaged ask gateway if they provide the disc of recovery for you.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

  p.s. That's what you should have done before you start the upgrade to Windows 7.

  Go to your laptop manufacturer's website and check if Windows 7 drivers are available for your make and model laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

• Problem upgrading from Windows 7 to Windows 10

  I am trying to upgrade my Windows 7 computer to Windows 10. I use firefox as my browser. I clicked on the download link on the page of Microsoft, I down load in the load file. When I click on the link to launch the mild wear, a box with a red X in a circle appears on my screen and declares that a required privilege is not held by the customer. I'm the rumming of the only person from my computer. Also, this message came when I try to upgrqade firefox. What could cause this problem. I want to upgrade my computer.

  What happens if you try to run from Internet Explorer?

  If you find it difficult to do some of the steps below, please see instructions how do their:

  http://windows10forum.com/blogs/entry/3-How-to-ensure-a-smooth-upgrade-to-Windows-10-anniversary-update/

  If you encounter an error about enough space to perform the upgrade, see the instructions:

  How to install Windows 10 on devices with limited space

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: 10 things to do if the Windows 10 install fails.

  Retry the upgrade manually:

  Option 1: Using the media creation tool

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  Select upgrade this PC now and then click Next

  

  Option 2: upgrade using the file ISO for Windows 10.

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader). You can do so from the Device Manager.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
  • Support your default BIOS reset BIOS.
  • Check if there BIOS updates available for your system, and then to apply them.
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a USB device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.

• Problems upgrading to Windows 10 Windows 7

  During the upgrade to Windows 10 Windows 7 form, I came to "what needs your attention", it asked me to uninstall McAfee, which I've tried to do through programs and features, I'm stuck at:

  

  Can someone help me to manually uninstall this annoying software?

  Thanks in advance

  Have you actually run McAfee on your PC or it was only preinstalled never activated?

  Anyway just the fact that it has been installed, windows is probably ruined, so I wouldn't pass the disorder in the upgrade.  This is the perfect case, needing an clean install Windows 10 Upgrade which is a much better facility anyway.  Subsequently, you can activate directly with your old OS product key as it is explained in the Wiki.

  If you insist on the instance and McAfee will not uninstall in Control Panel, then you can try to run its Uninstaller (removal tools) for common - antivirus ESET Knowledgebase software .  If the problems persist in trying to upgrade, and then follow these steps to Overcome Windows 10 Upgrade failure - Microsoft community .

• will have problems upgrading to windows 7 on my windows free 10.

  Firstly can not activate my windows key 7, then each attempt to upgrade my windows rights reserved 10, now also shows an error 0x8020000F - 0 x 90017 code.

  How can I solve this, in order to download and install the free windows reserved 10 on my system

  Try to re-activate your Windows 7 phone first:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Problems upgrading to Windows 7

  I am trying to upgrade Windows Vista to Windows 7. My laptop is running the 64-bit version of Vista Home premium, which I am having trouble with the upgrade to the same version of Home premium 64-bit version of Windows 7. It is during installation I receive two mistakes, "impossible to move from 64-bit to a 32-bit version" as well as the opposite, 'impossible to move from a 32-bit version to a 64-bit version." I use a single disc containing both versions and installing, I select the 64-bit version when you are prompted to choose what version cause that is the version of Vista that my laptop came preinstalled. Any help will be much appreciated.

  There is no legitimate installation media of Windows 7 that contains 32-bit and 64-bit architectures. Where did you get your support of?

  If you have a genuine Windows 7 Home Premium product key, download the 64-bit at the following site, by following the instructions provided. Burn a TI on a blank DVD and start the installation:

  Step 1: Download a copy of Windows 7:

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

  http://www.notebooks.com/2009/10/07/how-to-upgrade-to-Windows-7/

• Problems upgrading to Windows 7 Ultimate - needs disk drivers

  We have two HP TouchSmart PC.  One is a TouchSmart IQ505a originally shipped with Vista installed and running Windows 7 Ultimate for years.  The other is a 320-1135 was originally shipped with Windows 7 Home Premium TouchSmart.  We have a DVD of Windows 7 Ultimate 64 bit, burned an ISO image downloaded as part of a Microsoft Partner subscription.  (We are software publishers).

  When I tried to install the 320-1135a TouchSmart, installation got as far as saying that «the installation program starts...» ».  He then asked me to insert a driver disk.  I downloaded all the Softpacs driver for the 320-1135a TouchSmart, copied all the files .exe on a CD and inserted into the 320-1135a TouchSmart.  Then I navigated to the folder that contains the drivers, but the Installer did not see them.

  Over the years I've installed older TouchSmart IQ505a several times during the same installation disc, but I could neither recall never asked for drivers to the installation of Windows 7 was complete.  Then I reinstalled the TouchSmart IQ505a, just to double check my memory.  NONE of the pilots did NOT the same Windows Installer.  He completed the Windows 7 Ultimate 64-bit install.  I then installed the drivers of IQ505a TouchSmart as usual.

  I guess what is happening here is that the 320-1135a TouchSmart requires latest drivers, or something that is not on our Windows 7 Ultimate 64 bit DVD.  So I called HP Support, only to be told that they were not familiar with the Windows 7 installation procedures and since we got the DVD from Microsoft, we have to communicate with them.  I protested "but it's YOUR drivers that's not reading.  I expect Microsoft will just to send back me to you. "- only to be told"contact Microsoft ".  Which is where we are currently at.

  Can someone help me with my dilemma.  What I have to do something with Softpac .exe files before they can be seen as drivers my Windows install, if so what?  And if that's the case why couldn't HP tell me?

  If the TouchSmart is running Windows 7 Home Premium, why don't you just try the upgrade by using Windows Anytime Upgrade and the ultimate product key?

  If the license for Windows 7 Ultimate, you have access to is a retail version update or complete, you can use the product key and the Express upgrade to Windows 7 Home Premium to Windows 7 Ultimate. First of all, check that the edition of Windows 7, you are upgrading is already enabled (if it isn't, you will encounter complications and that you might start all by performing a clean installation). Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Ultimate edition at the request, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify its update of the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Ultimate files the stored settings and programs.

• Having problems upgrading to Windows 10 since July

  Original title: install win 10

  I hope someone can help. I tried to update my windows 7 to windows 10 since July without success. Ive reinstalled windows 7, made the chkdsk checking who tells me no problems found, free space, adding ram and downloaded the windows 10 installation tool.

  I download windows 10, he told me ready to install, I install, at the end it tells me it will restart and then don't leave me on a blue screen with the windows icon in the Middle no cursor or keys active including the on/off switch. I left it just like that from one day to the next but no change so I disconnect the battery and try again without success.

  I get the error code (0 x-C19001-0 x-20017 instalation failed in phase SAFE_OS with an error during the start operation).

  I hope someone can help because im powered and ready to give up and just forget. HELP the PLEEEEEEEZ in terms simple im not very computer.

  IM ready to and actually prefer contact you to give you access to my computer then you can do it for me.

  Thank you

  Ian

  Did you actually download the Windows 10. ISO file and made a bootable copy using the tool of media and the attempt to upgrade or have you used the wizard of the media creation tool to perform the upgrade?

  Could you provide your specifications and the brand/model?

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times and try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Do a clean boot, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both and try the installation again.
  • If you update via Windows Update, when download reaches 100%, disconnect the Internet LAN (Ethernet) or wireless, and proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

    How to: upgrade previous versions of Windows using the file ISO for Windows 10

    How to download official Windows 10 ISO files

• problem upgrading to windows windows 8.1 8

  At first when I tried to update to windows 8.1 of the app, he first asked me to sign up for an account with administrator privileges, although I am registered as an administrator and be able to perform other tasks as an administrator. I was also shown as an administrator in Control Panel. Now when I tried to update again, it shows that 'SOMETHING has HAPPENED AND THE WINDOWS 8.1 CAN can't BE INSTALLED. Now I don't know what to do!

  Hello

  You can try the mentioned media Windows 8.1 Installation creation tool here for upgrade to 8.1 Windows:

  http://www.kapilarya.com/download-Windows-8-1-media-creation-tool

  Hope this helps, good luck :)

• Error 80070006-2000 c while trying to upgrade to Windows 10

  Original title: Windows 10

  I have a problem upgrading to Windows 10. I get error 80070006-2000 c

  Review:

  • How to: 10 tips before installing Windows 10
  • How to: 10 things to do if the Windows 10 install fails.

  Retry the upgrade manually:

  Option 1:

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  How to create an ISO or USB drive.

  Select upgrade this PC now and then click Next

  

  Option 2:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• Want to upgrade to Windows 7 Professional to ultimate... is it possible?

  I looked at many Microsoft websites, which try to direct me to get Win8, I don't want to right now. I got a lot of 'system issues' and if an upgrade to Win7 Ultimate can help. However, I can't know where and how to do it. No 'official' sales, it seems. Not sure I can trust sellers on Amazon-the market place after reading some of the user comments. Someone did he do this upgrade? Suggestions welcome!

  If you experience system problems, upgrade to Windows 7 edition integral will not necessarily solve this problem, you must solve the problem that affects Windows 7 Professional now until you can upgrade ultimate.

  Could you identify the problems you're having with Windows 7 Professional.

  Regarding the upgrade to Windows 7 Ultimate, as online anytime upgrades are no longer available, you will need to purchase a license of Windows 7 Ultimate upgrade.

  Version upgrade - Microsoft Windows 7 Ultimate Upgrade

  If the license for Windows 7 Ultimate, you have access to is a retail version update or complete, you can use the product key and the Express upgrade to Windows 7 Home Premium to Windows 7 Ultimate. First of all, check that the edition of Windows 7, you are upgrading is already enabled (if it isn't, you will encounter complications and that you might start all by performing a clean installation). Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Ultimate edition at the request, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Ultimate files the stored settings and programs.

• How to upgrade to Windows 8?

  Original title: * e-mail address is removed from the privacy *.

  Why can't I get a upgrade to Windows 7?

  Hi Robert,.

  We would like to know the following information from you to help you to come.
   
  (1) want you to upgrade to Windows 8?

  (2) do you FAC problems upgrading to Windows 8

  If you want to upgrade to Windows 8, make sure that the computer meets the system requirements for Windows 8. Follow the steps below to check the system requirements.
  
  System requirements Windows 8
  http://Windows.Microsoft.com/en-in/Windows-8/system-requirements

  Write us with the details asked. We will help you to come.

• Solution for Webcam sleep & back problems after the upgrade to Windows 7

  Just thought I'd share the solution I recently found a problem I've had since a Satellite Pro A200 GE 26 Q of the upgrade from Vista to Windows 7.

  I installed the software webcam for windows 7 on the toshiba site and built-in Chicony camera would work very well after a reboot, but if the computer is in sleep for a long enough period, the unit would stay asleep when the computer woke up and wouldn't work at all, unless the computer has fully restarted.

  The solution lies in a change in the registry to force the computer to update the webcam USB controller is attached, after the release of sleep. It was apparently the default for Vista when it was released, but was changed in Vista SP1 and Windows 7. Designed for Vista original material which did not have its drivers/registry updated entries could therefore be subject to a failure because of changes to the default settings through the updates of windows. Toshiba, it seems, do not think that this issue then of the extinction of the registry fix for Win7 upgrades for the satellite Pro A200. Therefore fix manually.

  The article where the solution is here: [http://support.microsoft.com/kb/928631]

  You do NOT have the file of the fix, you must only make the change to the registry described later.

  You need turn on the camera while you do the following to make sure that it appears in Device Manager correctly.

  Step 1: Determine the specific USB host controller

  
  # Click on * early *, enter devmgmt.msc #the * search * box, then click on * devmgmt.msc* in the * list of programs.
  # The * view * menu, click on * devices of * connection *.
  # Expand the processor node. For example, expand * ACPI * Multiprocessor PC *. (In my case, * ACPI x 86 based PC) *.
  # Extend * system compatible ACPI Microsoft *.
  # Extend * PCI Bus *. Several USB host controllers will be listed.
  # Expand each USB host controller node, and then expand successive subnodes until you find the name of the device that is failing. For example, the device entry might look like the following: ACPI Multiprocessor PC\Microsoft ACPI-Compliant System\PCI Bus\Intel (R) \ICH8 family USB Universal Host Controller - drive root Hub\fingerprint 2830\USB * (Note: for me, I found the webcam to ACPI x 86 PC\Microsoft ACPI-Compliant System\PCI Bus\Intel (R) \ICH8 family USB2 Enhanced Host Controller - 283A\USB Root Hub + USB Composite Device\Chicony USB 2.0 Camera-based) *.
  # When you have located the device, right click on the associated and then USB host controller click on * properties *. In the example that is listed in step 6 you would right-click * Intel(r) ICH8 Family USB Universal Host Controller-* 2830, then click on * properties *. (* Again, for me it was different - ICH8 Family USB2 Enhanced Host Controller - 283 a *).
  # Click on the * details * tab.
  # Select * pilot key * in the list. The driver key will look like the following. Note the last four digits of this driver key. {36fc9e60-c465-11cf-8056-444553540000} \0002 * (on my system it's: (36fc9e60-c465-11cf-8056-444553540000) \0005*).
  
  
  

  Step 2: Add the ForceHCResetOnResume registry value for the USB host controller

  
  # Click on * early *, type regedit #in the * search * box, then click on * regedit.exe* in the * list of programs.
  # Find and then click the registry subkeys that are similar to the following: * HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contr ol\Class{36FC9E60-C465-11CF-8056-444553540000}\Four-digit_number.* in this step, the numero_a_quatre_chiffres is a placeholder for the USB devices in the system.
  # You must search the registry subkey by using the value that you noted in step 9 above. For example, if the key of the pilot to step 9 is * {36fc9e60-c465-11cf-8056-444553540000} \0002*, then you need to get * HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contr ol\Class {36FC9E60-C465-11CF-8056-444553540000} \0002. (For me, as mentioned above, this was \0005 (36fc9e60-c465-11cf-8056-444553540000)). *
  # On the * Edit * menu, point on * New * and then click on * DWORD value *.
  # Type# * ForceHCResetOnResume * to the name of the DWORD and then press ENTER.
  # Right click * ForceHCResetOnResume * and then click on * edit *.
  # In the * boite box the value data, type# 1 and then click on * OK *.
  # Exit the registry editor.
  # Restart the computer.

  This fixed the problem for a long time for me. I'm writing this in case it helps someone else who has the same problem. If anyone from Toshiba never reads this, you might consider adding the registry fixes for upgrades of windows 7 on the download page for this & all other models affected.

  Big Hey what s announced and detailed, thank you! :)
  I m wondering how you discovered it.

  But I want to add something: before you make or change something in the Windows registry, make a backup of it. In the worst cases, restore you the old Windows registry. Just to be sure ;)

• HP Officejet Pro 8500 a A910a: problem formatting of printer after upgrade to Windows 10

  After the upgrade to Windows 7 to 10, some printed documents very well while others print in close columsns of 15 letters causing a document 1 page run 6 to 8 pages long and useless.

  I downloaded the latest driver from HP and used their diagnostic tests.  I used Windows Diagnostics.  They suggest no action.  I contacted Microsoft 3 times and technicians turned out to be unnecessary; It was suggested that finally back to Windows 7.  The printer works just great.  This printer is no longer under warranty.  I have a same printer which works well on another computer running Windows 10.

  I would like to know how to solve this problem caused by the upgrade to Windows 10.

  Wing wrote:

  I use Outlook.  Previews all looked normal.  I had problens with printing of emails but have been able to print a PDF document.

  Hi Wingtip,

  Please follow these steps to try to resolve the problem:

  1. open outlook

  2. double-click on the email address that you want to print (the email must open in a separate window)

  3. click on file and then print

  4. in the print window, select your printer and click Print below options.

  5. in the window options printing, make sure that the print style is set to memo, and then click Page layout

  6. click the paper tab, and set the margins to 0.50 '' on all sides. Also make sure the paper type and size is set to letter.

  7. click OK and then try to print.

  Please let me know if this helped.