Problems using compensation in soa11g handler

Dear all,

I'm working on soa 11.1.1.3,

I have problems to help compensate for the activity and also the Manager of compensation within a scope.

From what I've read on the net, I think that its used to roll back a completed process.

In my case, I'm a process call 1 to process 2 process 3 and if any one process fails, say process 3, so I want the restore process 3.

within the scope of different, I put the entire process 3.

Now, after the completion of the process of 3 I used a throw activity to raise an error just to check if offset rollsback process 3 or not (do back only 3 because 3 is a different scope and I use offset inside the Tote activity of the 3 process). But what I found was in the audit trail of the instance, the State of the process 3 is complete and it shows also an error has occurred.

I thought that process3 would have been completely sustained roll and the audit trail would show information only until the process 2.

am I goin wrong somewhere or I interpreted the wrong way!

Any suggestion is welcome!


Concerning
Stone

Hello

Have a luk the link to understand the offset demo: http://www.scribd.com/doc/20681395/Compensate-Demo

Tags: Fusion Middleware

Similar Questions

  • Compaq Evo D5pM - problems using this model number, never find what he listed...

    Compaq Evo D5pM - (Pent4 - 1.7 GHz) problems using this model looking for parts or information number.  Serial number has not been useful.

    Someone said "aka Compaq D510." Trying to buy memory model (found on the case) my number wasn't so I tried to use D510 (it was listed). Apparently not the same computer / mine use 168 pins sticks and D - 510 came 188 pins. I did my 'upgrade' purchase by check the number of pins and using the already installed type.

    My computer is a vertical minitower - looks like D - 510-, but like I said the components are different.

    I was wondering if anyone knows a model Compaq Evo w / same components (P4 1.7 GHz; 168 pin memory) I could use for research purposes. The smallest horizontal model Evo often uses different (smaller) maps, etc..

    Tried the Ctrl-Alt-S keyboard shortcut to bring up the model number (etc.), but my keyboard shortcuts do not work on this computer. Run a search for edge came up with nothing to tune.

    I tried HP support and drivers.  With the help of several model numbers and found that absolutely nothing for HP Compaq or "Compaq" is in the list.

    It is a great 3rd computer that I've updated w / spare parts, use it remotely, especially for music. Only problem was the dark model number. If anyone has something useful to add would be most appreciated. Thanks in advance...

    PS I'm currently trying to identify MB for what it's worth, but a number of alternative model that works would be great.

    Hello:

    Your model is a d500 CMT HP.

    1 GB 128 x 64-133 MHz PC133, 168P DIMM, 3.3V, sync

    Type of memory: , (non - ECC)
    Maximum memory: 3 GB
    Slots: 3

    This is the page for support and drivers for your PC.

    http://h20566.www2.HP.com/portal/site/hpsc/public/PSI/home/?cc=us & lang = in & sp4ts. OID = 96294 & Task = & AC.admitted = 1389381517647.876444892.199480143

    QuickSpecs:

    http://h18000.www1.HP.com/products/QuickSpecs/productbulletin.html#spectype=North_America & type = HTML & docid = 10946

    Because nobody does more than the memory, it will be hard to find and very expensive.

    You can plan on paying more $ $70 / 1 GB chip if you do not find the specification above used on a place like eBay.

    You can buy a newer, faster CMT from HP on eBay for less than $70 delivered.  Memory is much cheaper to buy as well.

    http://www.eBay.com/ITM/HP-DC7600-Pentium-4-3-0GHz-40Gb-512MB-DVDRW-XPPRO-30-day-warranty-/281231108334?PT=Desktop_PCs & Hash = item417aae28ee

  • I have problems using the parental control. I want to block facebook from a user account. I have facebook in the ban list, but apparently not block. I have Vista. What should I do to block facebook?

    I have problems using parental controls. I want to block facebook from a user account. I have facebook in the ban list, but apparently not block. I have Vista. What should I do to block facebook?

    Have you followed all the steps like that?

    http://www.howtogeek.com/HOWTO/Windows-Vista/use-parental-controls-to-filter-websites-in-Windows-Vista/

    It is an alternative.

    http://explore.live.com/Windows-Live-Family-Safety?OS=other

    http://Windows.Microsoft.com/en-us/Windows-Vista/protecting-your-kids-with-family-safety

    If this post answers your question, click mark as answer .

  • unknown problem using WMP 12 no sound when played the song in the folder but has sound when he played in the player

    Hi all

    I have a weird problem using WMP (Windows Media Player v12).  When I double-click a song of in my library, the trail seems to play, but didn't have all the sounds.

    However, if I hover over the same path and then click Preview, the pop-up, the track plays with sound.

    When the track (s) do not play, all indications show the way to correctly play through of progress ' Now Playing ' screen, but no sound.

    In the past, when I clicked on any MP3 file, he would play using WMP.  Now, when I click on an MP3 file, it brings just "Now Playing" and looks LIKE he plays, but no sound.

    I have looked & looked for clues as to why it may be of WMP, but I can't understand the problem.  I also searched the Web for 'day' drivers in the Win System Manager, but Win says that pilots are "up to date".

    I have rebuilt the DB Library (twice) by removing the DB files in from WMP to a procedure in a WMP support forum. I also went to check the audio device in Device Mgr Win (mine is one on one). Everything seemed ok.  I also changed the devices to "Win by default" to what I think my onboard audio device is called.  I thought that that can do, but it's not.

    I was struggling with this since the day of the year.  Please help me solve this problem!

    Here is a link to my system features:

    http://Speccy.Piriform.com/results/0JAQshtlODwFxgwHeGb4rfq

    Hi, Pie,

    Welcome to the Microsoft community.

    Appreciate your efforts to try to resolve the problem that you have set so far. I guess that is not a problem with the driver that ultimately, the songs are playable using the media player. It could be a corrupted in Windows Media Player framework that is causing the problem. Let's run the Windows Media Player troubleshooting utility that resets all parameters to the player. Check out the link to do so:

    http://Windows.Microsoft.com/en-za/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

    Please let us know the results.

  • problems using the snap have amd, playback of Jpeg files

    Original title: I'm having problems using the component feature snap-in.

    Sometimes a single document disappears. When this happens while the document program is managed by then will not work. The document seems to be flying around the office. The last time this happened I had a doc JPEG upward and now I can't see what is JPEG. I don't know why the document wants to fly around, and I don't know how to get my use of the JPEG back.

    Hey Graham,.

    To view all jpeg images in the Viewer Windows photo or any other photo software visualization, you must configure this software as a default value in the default programs.

    Check out the link that allows you to configure the program as default.

    http://Windows.Microsoft.com/en-in/Windows7/change-which-programs-Windows-uses-by-default

    You can try to run the Aero Troubleshooter and see if that makes a difference.

    http://Windows.Microsoft.com/en-in/Windows7/open-the-Aero-Troubleshooter

    If the problem persists, provide us newspapers observer of events, as well as the error message if you receive a message.

    http://Windows.Microsoft.com/en-in/Windows7/open-Event-Viewer

  • I'm having a problem using the slideshow module in LR 6.3. The slideshow contains the background image as one of the images to display. Earlier, I had created a slideshow of practice and the background image was not displayed as an image in itself. How to

    I'm having a problem using the slideshow module in LR 6.3. The slideshow contains the background image as one of the images to display. Earlier, I have created a slideshow of practice and the background image was not displayed as an image in itself. How to make it behave?

    Another approach, perhaps a little more elegant (?). Create a collection that includes images for the slideshow. Include the background image in the collection. Drag the background image in the Panel to designate. Then, remove this image from the collection and create the slide show. I just tried and it works, too.

  • Problem using the REST API by wavemaker

    Hello

    I have a problem using other api with wavemaker. When I do a query GET with the RESTClientin FireFox, everything is fine for example:

    get https://XXX.XXX.XXX.XXX:8281 / vco/api/result:

    1. Status Code: 200 OK
    2. Cache-Control: private
    3. Content-Type: application/xhtml+xml;charset=UTF-8
    4. Date: Sun, 06 Apr 2014 16:50:04 GMT
    5. Expires: Thu, 01 Jan 1970 00:00:00 UTC
    6. Server: Apache-Coyote/1.1
    7. Transfer-Encoding: chunked

    But when I try to connect to the same url using wavemaker I recive: the answer is not in a valid XML Format.

    I use Orchestrator 5.5 and far as I could see the token is no longer required in the header. Anyone know why I get this error message?

    Thank you!

    Well half a day looking, then finally I thought to it:

    The header should be: accept: application/xml

  • Are there problems using Adobe CC with 10 Windows?

    Are there problems using Adobe CC with 10 Windows?

    Hi Michael,

    This might be useful: https://helpx.adobe.com/creative-cloud/kb/Windows_10_compatibility_FAQ.html

    Kind regards

    Sheena

  • Problems using preset animations of the bridge

    Hi all

    Use the CC range and recently had a new problem using the animation preset from Adobe Bridge. I am in After Effects as usual and then go to the animation drop-down menu, click on Browse recent presets to open the bridge, and then as a use normal bridge to select the preset I want. Double click it while emphasizing my piece selected in AE, and AE then says this:

    Screen Shot 2014-11-17 at 11.33.52.png

    And even error codes no matter what effect/animation I choose, if his image, video or text.

    If I just go a little in AE, my recent animation preset and choose one of there it loads up absolutely perfect. But it's embarrassing massively.  Any ideas? This problem appeared out of nowhere.

    This is fixed in the 2014.2 effects after update (13.2), which is now available.

    Details here: http://adobe.ly/1IVopxh

  • Someone at - he will meet similar problem using TextFieldAutoSize.CENTER and \n?

    Someone at - he will meet similar problem using TextFieldAutoSize.CENTER and \n?

    The following works as expected except that the text does NOT Center. He left aligned. I JUST also tried, but nothing helped. It is probably simple, but I rewrote the text and made the examples in the manual. Line with the numbers that it defines the width of the text box, but not the other centre of lines like I hoped.

    public void LessonPlan (): void {}
    var lessontext:TextField = new TextField();
    lessontext.autoSize = TextFieldAutoSize.CENTER;
    lessontext. Text = "only these \n Keys\nDo Something\nreturn/enter\n <>--\n0 1 2 3 4 5 6 7 8 9";
    lessontext.x = 500;
    lessontext.y = 10;
    lessontext. Background = true;
    lessontext. Border = true;
    var format: TextFormat = new TextFormat();
    format.font = "Verdana";
    format. Color = 0xFF0000;
    format. Size = 12;
    lessontext.setTextFormat (format);
    stage.addChild (lessontext);
    }

    Thanks in advance for a quick solution.

    Just add:
    format. Align = "center";
    for your work of TextFormat property.

  • Problem using friendly URLS SE

    Someone at - he had problems using the URL search engine friendly and css? I have a page which seems fine when I go to the page with the following url: http://localhost/demo/index.cfm. However if I change the url to http://localhost/demo/index.cfm/about-our-company the page behaves as if the css style sheet is not found. I'm totally clueless as to what could be the cause. Someone has an idea? I would really appreciate it!

    Thank you

    Jason

    Must have been some kind of problem with cache bug or something. I put all css links and all links to the absolute image links ( http://localhost/demo/styles/style.css). After coming back to it starts to work. don't understand, but the url can be a/search-engine-friendly-parameter after it and the page appears correctly.

    Thanks to Stressed_Simon and Ray Camden for pointing me in the right direction!

    Jason

  • Problem using multiple declarations

    I'm having a problem using several WITH instructions. Oracle seems to be waiting for a SELECT statement after the first. I need two to refer to things from each other in another query.

    Here is my code:

    < code >
    WITH calculate_terms AS (SELECT robinst_current_term_code,
    CASE
    WHEN robinst_current_term_code LIKE ' %' 60' THEN robinst_current_term_code - 40.
    WHEN robinst_current_term_code LIKE ' %' 20' THEN robinst_current_term_code - 100.
    END first_term

    CASE
    WHEN robinst_current_term_code LIKE ' %' 60' THEN robinst_current_term_code - 100.
    WHEN robinst_current_term_code LIKE ' %' 20' THEN robinst_current_term_code - 160.
    END second_term

    OF robinst
    WHERE robinst_aidy_code =: sanra)

    / * Use the terms of calculate_terms to generate attendance periods * /.
    WITH gen_attn_terms AS
    (
    SELECT
    CASE
    WHEN first_term AS '60% ' THEN 'fall'. substr (first_term, 0, 4)
    WHEN first_term LIKE '% 20' CAN 'spring'. substr (first_term, 0, 4)
    END first_attn_period

    CASE
    WHEN second_term AS '60% ' THEN 'fall'. substr (second_term, 0, 4)
    WHEN second_term LIKE '% 20' CAN 'spring'. substr (second_term, 0, 4)
    END second_attn_period

    OF calculate_terms
    )

    SELECT *.

    OF gen_attn_terms
    < code >

    I get ORA-00928: SELECT key word error absent. What could be the problem?

    You can just separate them with a comma:

    WITH calculate_terms AS (SELECT robinst_current_term_code,
    CASE
    WHEN robinst_current_term_code LIKE '%60' THEN robinst_current_term_code - '40'
    WHEN robinst_current_term_code LIKE '%20' THEN robinst_current_term_code - '100'
    END first_term,
    
    CASE
    WHEN robinst_current_term_code LIKE '%60' THEN robinst_current_term_code - '100'
    WHEN robinst_current_term_code LIKE '%20' THEN robinst_current_term_code - '160'
    END second_term
    
    FROM robinst
    WHERE robinst_aidy_code = :aidy),
    
    /*Use terms from calculate_terms to generate attendance periods*/
    gen_attn_terms AS
    (
    SELECT
    CASE
    WHEN first_term LIKE '%60' THEN 'Fall '||substr(first_term,0,4)
    WHEN first_term LIKE '%20' THEN 'Spring '||substr(first_term,0,4)
    END first_attn_period,
    
    CASE
    WHEN second_term LIKE '%60' THEN 'Fall '||substr(second_term,0,4)
    WHEN second_term LIKE '%20' THEN 'Spring '||substr(second_term,0,4)
    END second_attn_period
    
    FROM calculate_terms
    )
    

    Not yet tested there is no scripts.

  • Problem using AS a function

    Hi Guyz,
    I have a small problem using AS function. The problem is that I use AS a function in the WHERE clause
    to compare a column to a particular value, which gets this value from the front end. If the user has an apostrophe in the chain, he entered the SIMILAR function does not work because of the apostrophe. Is there a way I can escape the single quotation mark as escape us "%" and "_".

    Thank you.

    Replace function to replace the single quote with an empty space at the front end. SO it will replace the character, and you don't have to worry.

    Kind regards.

    LOULOU.

  • Equium L40 problems using the recovery disk

    Hello

    I wonder if anyone can help me?

    I want to restore my computer but when I put the recovery disk in I select the cd/dvd rom drive by pressing f12 at startup.
    I also maintained pressed C when I lit. I select the disc I want to start the computer, it goes to a black screen, then it loads just windows up as usual.

    I phoned with Toshiba for help and all they could tell me was that as another drive worked on my computer, it isn't a problem with the disk drive, but a problem with the disc and it will cost me 30 quid for a new!

    Is anyone able to give me any help

    Thank you

    Hello

    If I understand your message, you are not able to recover the laptop using the Toshiba disc. Is this good?

    Well, in your case I recommend to start from another original Windows XP CD bootable disc or Vista DVD or a Linux drive to test if the CD/DVD drive can handle this drive.

    In this case, you can test if your CD/DVD drive is faulty or if the problem is related to the Toshiba DVD recovery.

    Welcome them

  • Analog input problems using PXI-6232

    I tried to solve this problem for a while now without a bit of luck. Solution suggestions are welcome.

    I use a PXI-6232 with LabView 8.5.1 to accept signals analog several of my sensors. Based on the signals as a PWM signal is generated and the output using PXI-6713.

    Some of the analog input signals have spikes in them, which occur at all times during the tests. I watched the same signals on an oscilloscope - without crampons. I change my hardware configuration, and the spikes still occur in the same places. It seems that the program makes some resets resulting in measurement errors.

    I have attached the VI and a JPEG of measured inputs.

    Thanks in advance

    Concerning

    Vadim

    I was first confused of your time scale but it seems that these spices occur every 20ms (not s) what to a line 50 Hz noise due to switching power converters (or a diode without compensation bridges )

    Another clue was the measure of the scope. While using the application scope, you opened a groundloop so the spikes because of the dI/DT through the groundloop are another way to get around.

    So I'm pretty sure this isn't data acquisition (in this case) this is your configuration.

    Provide a cleaning (low R AND L low) path of power (keep them close and twist slightly if possible), add a filter to down the dI/dt, identify the ground loops.  (Use your scope with a little as a sensor at the entrance to reel and catch magnetic fields can open eyes)

    THEN to clean the last ears (on the acquisition of data) to get the last ppm use selfs

Maybe you are looking for

  • My connection no longer works on my laptop

    When I tried to connect this morning my password does not work and the Enter key is to add something to the password. How can I fix it? Thanks for the tips

  • Connection network C7280 problem

    Hi, I changed my dsl provider to Comcast to ATT (also new router).  Printer, which worked fine, now does not connect again router.  New network appears, but after several attempts, Printer Setup Wizard indicates that it could not get a connection.  I

  • My Windows XP Home Search Assistant is not active

    I recently had to perform a clean installation of Windows XP Home SP3. When I opened the search tool, I don't have the Research Assistant (dog). What I have is the search engine bland with a few search options below the search fields. It looks like t

  • DV6-2158nr: help! DV6 "disable System."

  • Login password forgotten and locked out of my laptop.

    I know this question has been asked before and I followed the order previously given to guests. I forgot my password to connect to Windows 7 Edition basic family. I inserted the repair disk and followed the command prompts-, but when I restart the la