Problems using the local test on a Mac server

Similar Questions

• A Message in a rectangular box "Messages Agent wants to use the 'Local products' kenchain. appearing on the screen and ask for Keychain password password.  This started after I changed the password of Apple resulting for the purchase of a new iPhone

  A Message in the box 1. "Message agent wants to use the 'Local products' kenchain. "is appearing on the screen and ask for Keychain password password.  This started after I changed the password of Apple resulting for the purchase of a new iPhone.

  My iPhone 5 has been damaged and the screen was not visible.  As a result, I couldn't open the iPhone.  I bought 5 s iPhone and when I got to connect with the iCloud

  I remember the answers to security questions.   The seller must change the password and enter new answers to security questions, I did.  This happened in Bangalore.  When I'm home in Ernakulam, Kochi (India), where I has the Air of Mac, Ipad and my wife had another iPhone and laptop computer Dell, these problems began to come up on the screen and blocks the screen.

  Four Messages are appearing: the first is on the top.

  Other messages are:

  2. ' cloudd wants to use the kenchain 'local products '. '

  appearing on the screen and ask for Keychain password password.

  3. ' com.apple.iCloudHelper.xpc wants to use the kenchain 'local products '. appearing on the screen and ask for Keychain password password.

  4. ' cloudpaired wants to use the kenchain 'local products '. ' is appearing on the screen and ask for Keychain password password.

  It of an upheaval and please suggest how to solve this problem

  Hello remy!

  I see that you are either prompted by iCloud Keychain with various alert messages.  I know it's important to have iCloud Keychain works correctly and I am pleased to offer you an article that should help you.  Please follow the instructions in the following support article:

  If your Mac keeps asking for the password in the keychain

  Thank you for using communities of Apple Support.

  See you soon!

• How to: use the HP Test Fax Service

  Did you know that HP has a test fax service in which you can test sending and receiving a fax. This is particularly useful if you have a problem sending or receiving. Alternatively, you can isolate the issue is on your end or the other end. If you can successfully send a fax and receive an everything using the Test Service of fax HP, this means that your fax is working properly. If you're still sending or receiving from other chances to fax numbers that the problem is on their end.

  How to use the Fax Service to Test HP - HP Officejet Pro 8500 first All-- One A909n Printer in

  How to use the HP Test Fax Service

  I hope this helps someone. If anyone has any questions about the service or fax problems, I'd be more than happy to help.

• Problem with the locale and date serialization in java

  Hello
  I have a serious problem with Flex dates and need a solution as soon as possible. I have a Flex 2 front end that uses remote java objects to talk to the database. I have a Flex 2 DateFields form. The dates of these are stored in the datebase. However I need the dates to be stored exactly as users them selects regardless of the locale.
  
  What is happening at the moment is we are developing in Ireland and in selecting a date, filling an actionscript VO which is in turn transformed into a java VO (on a server in the United States) and when the date is stored in the database is one day before the date that we have selected. It seems that the flash player uses the locale with a time of midnight (GMT) users. When place the conversion to the EAST, it stores the date (GMT - 5), which causes the being Eve.
  
  I changed my flex code to set the date at 12: 00 time even if he converts and subtracts 5 hours it will always be the same date. But this does not work, it seems to work sometimes and not others and is very inconsistent. I can't understand why it works sometimes.
  
  Its makes me mental - someone has experienced this problem or did someone knows a solution PLEASE?
  Thank you

  I'm not very familiar with your specific question, but I wonder if a combination of store dates as the first milliseconds since midnight January 1, 1970, universal time, stored as a string and then when presenting the data are aware, locale would solve the problem.

• problems using the snap have amd, playback of Jpeg files

  Original title: I'm having problems using the component feature snap-in.

  Sometimes a single document disappears. When this happens while the document program is managed by then will not work. The document seems to be flying around the office. The last time this happened I had a doc JPEG upward and now I can't see what is JPEG. I don't know why the document wants to fly around, and I don't know how to get my use of the JPEG back.

  Hey Graham,.

  To view all jpeg images in the Viewer Windows photo or any other photo software visualization, you must configure this software as a default value in the default programs.

  Check out the link that allows you to configure the program as default.

  http://Windows.Microsoft.com/en-in/Windows7/change-which-programs-Windows-uses-by-default

  You can try to run the Aero Troubleshooter and see if that makes a difference.

  http://Windows.Microsoft.com/en-in/Windows7/open-the-Aero-Troubleshooter

  If the problem persists, provide us newspapers observer of events, as well as the error message if you receive a message.

  http://Windows.Microsoft.com/en-in/Windows7/open-Event-Viewer

• How to prohibit remote access vpn client to use the local DNS server

  Hello

  I'm on ASA5505 remote access vpn configuration.

  Everything works fine so far, except when the client got connected, he always used the local DNS server provided by the ISP.  How can I force the customer to use the DNS server configured on ASA?

  Thank you.

  Kind regards

  The command "Activate dns split-tunnel-all" is supported only on SSL VPN and VPN IKEv2. Since you're using IKEv1, this command is not supported.

  Here's the order reference:

  http://www.Cisco.com/en/us/docs/security/ASA/asa82/command/reference/S8.html#wp1533793

  You configure no split tunnel? If you are, then you need to configure "tunnelall" split tunnel policy, and that will force the dns resolution and everything else through the VPN tunnel.

• How to use the product key on another mac

  How to use the product key on another mac

  Exactly in the same way you did the first time... install and enter your serial number when Setup screen serial number

  You install exactly in the same way you did the 1st time... Put your disc in the drive, and enter your serial number when asked

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  -you will need to enter your original serial number during the installation for non-Cloud programs

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

  - and also read https://forums.adobe.com/thread/1146459

• I'm having a problem using the slideshow module in LR 6.3. The slideshow contains the background image as one of the images to display. Earlier, I had created a slideshow of practice and the background image was not displayed as an image in itself. How to

  I'm having a problem using the slideshow module in LR 6.3. The slideshow contains the background image as one of the images to display. Earlier, I have created a slideshow of practice and the background image was not displayed as an image in itself. How to make it behave?

  Another approach, perhaps a little more elegant (?). Create a collection that includes images for the slideshow. Include the background image in the collection. Drag the background image in the Panel to designate. Then, remove this image from the collection and create the slide show. I just tried and it works, too.

• Problem with the local adjustment brush

  Problem with the local adjustment brush:

  Tire of a photo with the iso 6400 to a person and I wanted to increase the exposure of the face only. So I set the exposure compensation of at least 4 local adjustment brush, in order to see where I paint. In earlier versions of lighroom I got a smoth black area. My intention was, and then adjust the brightness to + 0.33 in order to get a slightly lighter face. But I have no black smoth area. Instead, I largely perforated black area. After setting the exposure to + 0.33, the face was indeed more light, but with many large tasks very ugly.

  The brush settings:

  Fat / size was 7.1.

  Weiche Kaiser / smoth edge was 50.

  River / stream was 60.

  Dichte / density was 100.

  Automask has been verified.

  Any ideas?

  Maybe it's because you have "Auto mask" checked the.  Uncheck the box before painting to see if that helps.

• Cannot SSH in vmware player (can use the local IP address but not external IP)

  As above

  Cannot SSH in vmware player (can use the local IP address but not external IP)

  Am new to vmware, so if you need information to help me on what you'll need to tell me how to get

  See you soon

  Vodkaholic27, let me start with the layoff of vodka for a bit and then set Virtual Machine network card to bridged and then assign a static IP address that is appropriate for the guest as the physical LAN operating system is the host.  Then in the local physical network for static IP address router you assigned in the guest OS configure it to allow Port Forwarding on the appropriate port.  Then, you will be able to access from outside local physical host network.  If it's just on the other system on the physical LAN to the host that you want to access the guest you need not set up the Port Forwarding on the router on the local physical host network, simply use linked by a bridge to the network adapter in the Virtual Machine.  If you use NAT to the NIC of the Virtual Machine, then you need to set Port Forwarding in the virtual network Editor.

  Note: The virtual network Editor is not installed by default in Vmware Player 3.x and later versions.

  ==========

  To install the missing virtual network Editor, the command prompt:

  VMware-player-*.exe -e c:\vmptmp
  

  Then in the c:\vmptmp folder find the file c:\vmptmp\network.cab and extract (double-click on the .cab file) vmnetcfg.exe (virtual network editor) file in the working directory of VMware Player usually 'C:\Program VMware Player' or ' C:\Program Files (x 86) \VMware\VMware Player.  You can create a shortcut and place it with the shortcut of VMware Player, if you want to access it more easily.  Note: there are some for all the files to be extracted to then access the network.cab file.

• weakness / strength to use the local system for vSphere services account

  Beyond to create Active Directory accounts for the connection of your server vCenter to a SQL remote box, is there a better practical reason to create an AD account to run your services of vSphere?

  The default is to use the "Local System" account. Is there an inherent weakness by using the local system account for services such as vCenter, VUM or vConverter?

  Hi James. In the service using AD creds accounts can actually be very precarious - a little more info on:

  http://articles.TechRepublic.com.com/5100-10878_11-1053581.html (gets interesting about 3/4 of the page down)

  http://www.sans.org/reading_room/whitepapers/application/service-account-vulnerabilities_5

  Concerning

  Owen

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• There might be a problem with the configuration of your DOMAIN NAME SERVER

  Last week one, I noticed some problems with my internet connection. I have a BSNL broadband connection. I am connected to the internet, and after some time all of a sudden, I'm not able to connect. My modem lights are all on and on my laptop, I see the symbol of 2 computers with a note on it, which means that I'm connected. But still the pages not displayed. When I run Network Diagnostics (I Windown Vista) I get the error message saying: "there could be a problem with the configuration of your DOMAIN NAME server. I turned off the computer and the modem and switch it on after a long time... He would return but loses the connection with the same error message again. What can I do? I tried to reset the modem, also tried the system restore. What can I do? Please help me. I have laptop Dell Insipiron with Windows Vista and I connect wireless.

  We do not know how your system should be set up - including the DNS configuration and settings.  I recommend you contact your ISP's technical support group and get help from them in the configuration of your computer (and test lines and modem - the problem could be the modem and not on the computer or it could even be the service provider itself).  It can be something as simple as a typo or a box checked or not checked - I do not know because I do not know their settings (different for each access provider).  Give them a call.  I do so often when I have connection problems, and they are almost always useful, or schedule a service call if they cannot help.  I think it's your best chance to solve this problem.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• M277dw: Reset zero problem using the USB to M277dw

  Hello, I'm just trying to see if anyone else has had this problem. I use the laserprinter HP M277dw and use a current running nine Imac El captain. If I print anything on my printer and then decide to reboot my computer for some reason any, if I keep the USB cable connected to my computer that is connected to the printer, the computer hangs on reboot. It is the same on a full stop to the low and new start up as well. It's almost as if the printer is not disconnected somehow when I shut down or restart. The solution I found is to unplug the printer USB whenever I have to restart or shut down and then reconnect to the computer up and running again. My feeling is that this is related to the El captain, but I can't say for sure. Anyone else see this problem?

  Hi @andrewdawson11,

  Welcome to the Forums of HP Support! I see that you have problems, turn off the Mac, it crashes on restart when the printer is connected by a USB connection. I will definitely do my best to help you. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  Run Apple updates.

  You download and install the latest drivers for the printer? If the latest driver is not installed, which can cause this problem. Here is the link if you have not already: HP Easy Start.

  Make sure that the correct driver is added.

  Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (Laserjet M277dw)

  If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

  

  

  If the problem persists, try the following:

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the printer name) Then click the Add button.

  Test the printer and try to restart the Mac again.

  If there is anything else I can help you, let me know. Thank you.

• Problems using the Gradient in Camera Raw

  Hello world

  Just yesterday afternoon I have a new problem developed using degraded in Camera Raw, unitl it was working fine. When you are working on an image when I click on the gradient tool your pop-up window appears which says 'Unable to create local adjustment. All local adjustment controls are defined to have no effect on the image.

  I looked in the preferences panels but can't find anything that relates to this issue. Any ideas on where the problem is maybe? I use CS5.5 Suite on a Mac Mini.

  Thanks for any help you can provide.

  Kind regards

  Mark

  The warning gives you a clue. Change any of the default settings, or choose a preset, and then create the gradient.

• Equium L40 problems using the recovery disk

  Hello

  I wonder if anyone can help me?

  I want to restore my computer but when I put the recovery disk in I select the cd/dvd rom drive by pressing f12 at startup.
  I also maintained pressed C when I lit. I select the disc I want to start the computer, it goes to a black screen, then it loads just windows up as usual.

  I phoned with Toshiba for help and all they could tell me was that as another drive worked on my computer, it isn't a problem with the disk drive, but a problem with the disc and it will cost me 30 quid for a new!

  Is anyone able to give me any help

  Thank you

  Hello

  If I understand your message, you are not able to recover the laptop using the Toshiba disc. Is this good?

  Well, in your case I recommend to start from another original Windows XP CD bootable disc or Vista DVD or a Linux drive to test if the CD/DVD drive can handle this drive.

  In this case, you can test if your CD/DVD drive is faulty or if the problem is related to the Toshiba DVD recovery.

  Welcome them