Problems with a lot of updates to install. Message: I have no admin auth.

Similar Questions

• 6.2.16: when you try to update Itunes, I get the following error message: "there is a problem with this package of can I install."  A program required for this install to complete could not be run.  Contact your support team / packages vendo

  6.2.16: when you try to update ITunes on my Windows laptop, I get the following error message: "there is a problem with this Windows Installer package.  A program required for this teaching to complete could not be run.  Contact your supplier of staff or the package of support ".  There is no associated error code.  I've never had a previous issue with ITunes updates.  Thank you, Debbie

  Repair Apple Software Update since the programs & features Panel configuration and then try again.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Hi, I just upgraded my 4s to 9.3.2 and now it is completely dead and will not start. Had no problem with any other previous updates.

  Hi, I just upgraded my 4s to 9.3.2 and now it is completely dead and will not start. Had no problem with any other previous updates.

  Sorted now

• Adobe Flash Player (Vista) internet ((spécifiquement ferme ville,, sur facebook)) a box appears and tells me that there is a problem with an add-on that was installed called flash10c.ocx

  original title: Flash Player

  I have installed Adobe Flash Player on my PC (Vista), and every time I want the internet ((spécifiquement ferme ville,, sur facebook)) a box appears and tells me that there is a problem with an add-on that was installed called flash10c.ocx. How can I solve this problem? I tried everything I could think of. I deleted my cookies (and Add-ons), re-installed Adobe Flash Player and nothing works.

  What browser are you using IE or Firefox or others?  Sometimes special versions of Flash are required for browsers, and besides, IE 64-bit does not support modules including Flash, she, that is to say, it takes the 32-bit version, even on a 64-bit machine.

  Take a look at IE / tools / manage add-ons and make sure that 'Shockwave Flash Object' is enabled.

  Check that you downloaded the correct version in the first place.

• Anyone having problems with guides since the update?

  Anyone having problems with guides since the update?

  My guides are everywhere, since I updated my Illustrator last week. The guides are solid lines while they should be dotted (as defined in my preferences) when I'm zoomed out... and then disappear or become dotted but moved when I Zoom.

  It's so frustrating! I can't work like this!

  All the solutions out there?

  Thank you

  lyncylox,

  You can try to disable the GPU performance by clicking on the icon of the rocket in the bar of the App, or on the top of the menu bar, deselect the box Performance GPU; You may also uncheck performance GPU in your preferences.

  I think that the issue should be fixed with the 19.0.1 patch.

  Link to 19.0.1 release notes: https://helpx.adobe.com/illustrator/kb/illustrator-cc-2015-crash-bug-fixes-19-0-1.html

• What is the problem with Creative Cloud connection update

  What is the problem with Creative Cloud connection update?  I tried 25 times to update, but it does not work? Can you please help?

  Double-click on the creative process of cloud.  which opens another window that contains a button exit.

  or, click the process (to select) > click on view > click process to quit.  This method brings up a window that contains the two resignation and force them to leave (in the case of quit smoking does not work).

• I had problems with windows live mail, I uninstalled it, now I have no e-mail at all, can you help me. I've been using windows vista

  I had problems with windows live mail, I uninstalled it, now I have no mail at all, I was using windows vista

  Hello

  You can download, install, and configure Windows Live Mail again or use Windows Mail, which is the default email program in Vista.

  How to set up Windows Mail.

  Contact your ISP (Internet Service Provider); They provide your broadband / dial connection.

  Ask them to:

  1. your username with them

  2. your password with them.

  3 incoming mail POP3 server.

  4. the outgoing mail SMTP server

  All the settings that you need to come from them, not Microsoft; and they are usually happy to help you set up your e-mail program.

  You can use this guide to set up Windows Mail:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-mail-setting-up-an-account-from-start-to-finish

  See you soon.

• 57F error code I have Vista and I am running MS Office 2002 for students. When I try to install the updates, I get this error code. Until a few months ago I had no problem with the installation of updates for MS Office 2002

  Ideas:

  • Programs that you have problems with MS OFFICE 2002
  • 57 E error messages
  • Recent changes made to your computer NO
  • What you have already tried to fix the problem error code search

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hi halecky6,

  Welcome to the Microsoft answers site!

  (a) update you are trying to install? (It would be better, if you can provide the number of KB)

  (b) are the other updates related to Windows from installing on your computer?

  I suggest you try the following steps:

  Step 1: Disable the software security and then try to install the update

  Note: Activate security software once the test is completed.

  Step 2: Download and install the update in the clean boot state

  To perform a clean boot on a computer that is running Windows Vista, follow these steps.

  1. click on start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  After starting the computer, download the update manually and try to install it.

  http://www.Microsoft.com/downloads/en/default.aspx

   

  Note: Return the computer to normal - reset the computer to start as usual (follow step 7 in the link) once everything is done.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  You can also post your question on the office community, please visit the link below:

  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I had problems with the application Manager Update, then I was instructed to re - install the product now I can not install I get the error

  Cs6 bought for more than a year, and recently had problems with the application manager, then I was instructed to re - install the product now I get errors after downloading to install it, so now I don't have cs6 on my computer, I can't go to adobe as I keep getting palmed to do that and the next thing , why can't I talk to someone why my program is not installed.

  It's ok now, I used the creative cloud cleanser and then tried to install again and bingo! everything fine now, thanks anyway

• Satellite Pro C850 - problems with WiFi after Windows update 8.1

  Hello

  I was wondering if someone could give some advice on a problem I have.

  Had an adjustable C850 Pro for a few months and worked well on Windows 8.
  I myself am then harassed and intimidated by Microsoft Update in order to install Windows 8.1 and in a moment of weakness, I succumbed (got sick of the nagging).

  Since that time, my wifi is very intermittent; either I'm on another computer write this and the laptop is essentially not connected to the internet.

  For some reason any (although I didn't try it before), I can not connect via ethernet either, so I think it's probably the driver problems. (I also tried to connect the public wifi but fails).

  I tried to install the driver WiFi Toshiba 8.1 but that has not solved the problem.
  Then I noticed that I'm supposed to install a bunch of drivers in the order.

  Maximum setting to do it, but the first package (associated with bluetooth) said I have to remove the current driver... I try by "turning off", then "Uninstall" but 8.1 seems to re - install automatically and I don't know how to disable this option (I can try to delete the driver file, I guess, but I'm sure 8.1 covered too and will probably launch a drone to try me out ", if I do). *

  Any kind soul there suggestions on a way forward? Pls.

  I see in the instructions of Toshiba Windows Update 8.1 should I have uninstalled the drivers before the update, but there is not much I can do about it now. :(

  Hello

  > I don't see in the instructions of Toshiba Windows Update 8.1 should I have uninstalled the drivers before the update, but there is not much I can do about it now
  All your problems with the Windows 8.1 update related to the fact that you have not upgraded the Windows 8.1 system as recommended by Toshiba.

  Details:
  http://www.Toshiba.EU/innovation/generic/windows8_1-message/

  Solution?
  Back to Windows 8 (reset the system back to factory settings)
  Then, install all updates and patches for Windows 8 and follow along with the upgrade of system as described on the Toshiba Windows 8.1 upgrade page

  On the page of the Toshiba UE driver, you will find all the instruments that must be installed in the correct order and Windows 8.1 driver!

• Serious problems with the 6.16 update: reboot page & chat

  First of all, I want to mention before, if there is no problem with Skype, it would make my computer all freeze where I by force to restart my system. If she didn't answer I could not force the program to close and would be forced to stop and start again.

  An hour or two there is something like it happened and so I restart my computer. Restart Skype updated during this time. When he came I went to my main group chat and it froze my computer, forcing me to do a hard cock down. For the next couple hours, it's the same thing. Even when I tried to disable my internet so I couldn't even open Skype. It is only now, 4 hours later that I am able to access Skype and the rest of the features on my computer, something I wasn't able to do.

  With this update, the display for the bubbles of text is not something I like. Timestamps are gone even if I still have the box checked to have these timestamps. I can't scroll to see previous messages and certain user setting have been forgotten or reset. I'm not happy about all of this change suddenly that I'm already rather on the fence with how much I love Skype.

  I'd like a way to return to the old interfaces without suffering a decline in quality with calls and video.

  The cat new UI is provided with the 6.16.64.105 version only. You can uninstall this 'special' version and install the 6.16.0.105 version with the old chat UI window.

  http://download.Skype.com/MSI/SkypeSetup_6.16.0.105.msi

• PROBLEM WITH THE INSTALLATION OF UPDATES

  When the computer tells me to reboot to complete the installation of updates, I do.  It stops normally, but when he tries to restart, the screen goes completely dark.  I have to press the market / stop button for 4 seconds & it stops.  I wait a few minutes start computer & it starts normally & then it finish installing updates.  My question is what could cause the problem?  I learned recently by Microsoft (office of answers) that there is a big possibility that I corrupted the registry files. She did a remote help on this laptop for a problem with the execution of any Microsoft fix it Solutions.

  I would like to know what else could be the cause of the problems and what I could try to fix it?

  CF. http://answers.microsoft.com/en-us/windows/forum/windows_vista-update/windows-updates-wont-install/9ae86061-ff1e-4996-b5a2-8918d01588ab (10 Dec-15)

• Problems with the Windows 7 updates

  I have problems with the updates of Windows 7.

  The show just download but stay at 0%, even after a number of hours of updates.

  Looks like I have had the problem for a while as I click on the button to download when he says that they are available, but they were not the installation. Since April - the highest numbered download was KBS3149090.

  I tried a couple things from these forums, but they do not work or do not install it.

  I downloaded wu10.diagcab but it does not return an error of 0 x 80070002

  You are looking for takes this mistake me https://support.microsoft.com/en-us/kb/910336 that says stop the update, remove a certain number of files and turn it back to the.      

  He says then try the System Update Readiness tool so I download and install this KB947821 , which seems to settle.

  I try to install the updates but nothings happening - don't know what else to try.

  Peter

  Windows Update process: July 2016

  I've seen this many lately.  This is what works for me and I did it on a large number of computers in the last 2 weeks.

  1. Change Windows Update settings to NEVER.

  2. Type services in the text box that appears when you click on the globe to start

  3. Select and open the services window

  4. Find and right-click on Windows Update (service), choose stop

  5. Close the Windows Update window.   If she will not close, start the Task Manager (right click on the taskbar) and end of the task.

  6. Now go to: http://wu.krelay.de/en/2016-07.htm

  7. Download 5 all updates are listed in a folder on your desktop.  Choose the correct column for your computer.

  8. Double-click on and start each one, one at a time.  Don't be surprised if one or more respond with already installed.  It may take a while to process.  This is probably one or more of them will install.

  9. You should not restart after each one ends, if there is more than one installed.

  10. Restart and wait for the Windows Update process to complete and automatically reboot your computer.

  11. Open Manager tasks again and wait until you see the percentage within the reach of the bottom and stay below 10%

  12. Now start Windows Update

      The Windows Update process happens much faster that it would otherwise have.

• Problem with the security sysytems update KB3110329 for Windows 7 64 x-based

  Microsoft is aware of this problem with security update KB3110329 for Windows 7 x 64 systems? Have they fixed it? Thanks to John Butler to isolate the problem of configuration updates from January 12, 2016.

  Bill Blair

  Dear Jayant Gupta,

  Thank you for your response. When I tried to install the updates from 12 January 2016 on my Windows 7 computer, I met a problem at the stage where I have to shut down the computer to complete the process. When configuring updates, he remained at 12% for a very long time and then permanently returned to the opening of session and when I checked the history update based on the x 64 updates eleven have been identified as having failed.

  I ran to the resolution of the problems of Windows Update. I did not try to reset the Windows Update components for fear of making things worse. I see at least another user, John Butler, has encountered the same problem and he identified the update of security KB3110329 as the cause of the problem of configuration.

  Later, I downloaded the updates again and hid and then successfully installed their KB3110329 leaving unchecked everything.

  Currently, I have hidden KB3110329 and wait for the opinion of its repair.

  Thank you for your help.

  William Blair

• Problem with KB28083821 and KB2855336 updates

  When Microsoft will challenge updates KB28083821 and KB2855336 so that they will not install on Windows 8. Have you tried many times to install and have failed since the first day on two different machines? In addition, Microsoft FIXIT is never available and works with Windows *?

  I have similar problem - Windows Update does not pass the 45% downloading KB2855336. For each batch of updates, there are 1-2 updates Windows Update can not download completely. I tried the steps above (method 1), but they did not solve the problem. I use Windows 2012. I had no such problem with Windows 2008 or Windows 2003.

  The troubleshooting link is a waste of time:
  Have you tried to install the update manually?
  No, because I want to know why I always need to do this for 1-2 updates each batch of updates.

  Is there enough free space on your PC?
  Yes it is.

  There are mistakes that are just a matter of bad timing, and they can be caused by busy websites or Internet connections or a number of other factors.
  The download of KB2855336, which is 83KO, always stops at 45%.