Problems with an iMac 2013 end of printing

Similar Questions

• What is the problem with my iMac mid-2011

  Hello

  Need help find out what is the problem with my iMac to mid-2011.

  Yesterday during a reboot it just never came to life.

  On turning the power on, I get the RINGTONE to start and that's it. The screen is totally black. Nothing behind tried with a torch.

  VRAM rearmament so far I tried repeatedly, unplug and plug, all kinds of combinations of keys in the carillon and nothing.

  Connected to an external monitor and shows nothing of too - no signal.

  Any way that I can know what is wrong with it before sending it to the service tech? I suspect bad graphics card but how do you ensure?

  From what you describe, it looks like a hardware issue that Apple will only be able to resolve, but not to despair immediately.

  Read it please get help with graphics issues on external displays connected to your Mac - Apple Support.

  I know that the title and subject are not suitable to your concern, but buried in this document is the following passage that contains three links describing the steps to follow.

  If you can not change the resolution of your screen because you see no image, restart your Mac in safe mode to reset the default display resolution.

  If booting safe mode doesn't resolve the problem, reset your Mac NVRAM and SMC to reset the video ports on your Mac to their default values.

  That first, then write again for additional suggestions if you are still having problems.

• you have tried to contact me to solve my problem with my iMac, but it seems contact you number is wrong

  HI I mayada I have the case Id * and the serial number of my iMac is C0 * NCR you have tried to contact me to solve my problem with my iMac, but it seems the number you contact will not my right number is + *.

  Mayada

  < personal information under the direction of the host >

  If you are referring to Apple is not Apple. Here are the forums of users only. Call Apple directly to deal with your problem.

• Windows cannot print due to a problem with the installation of the current printer.

  Thread title: Epson TX235W will not print

  When I click on 'print', I get the print control. the box that tells the printer how many copies, etc.  When I toast 'print' it get a little box that says Windows cannot print due to a problem with the installation of the current printer.  Try one of the following:

  Check the printer by printing a Windows test page

  Ensure that the printer is online and on

  Reinstall the printer driver

  I did everything above and I get the same result.

  Help!

  Hello

  Did you of recent changes made to your computer that caused the problem?

  This problem is limited to a particular application?

  How is the printer connected?

  Method 1) restart the print spooler service and delete the print queue

  Start the print spooler service in the Services console

  1. Click Start and run, type services.msc, and then click OK.
  2. Right click on the print spooler service, and then click on stop.
  3. Right click on the print spooler service and then click Start.

  Start the spooler service for printing at the command prompt

  1. Click Start, run, type cmd, and then click OK.
  2. Type the following commands at the command prompt:

     net stop spooler
     net start spooler
     Output

  Note: Press ENTER after each command line.

  Cancel printing

  http://Windows.Microsoft.com/en-us/Windows-Vista/cancel-printing

  Method 2) remove and add the printer and then check.

  Add or remove a printer (Applicable for Windows 7)

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  It will be useful.

• Windows 7 cannot print - "Windows cannot print due to a problem with the installation of the current printer"

  Window 7, Lexmark 1300 series. Cannot print. When you try to print from Notepad, the error message is "the system cannot find the file specified." What impression of the word is "Windows cannot print due to a problem with the installation of the current printer" have uninstalled and reinstalled all printers in many times. Removed the Lexmark 1300 in the registry and reinstalled. No change. Ran sfc/scannnow several times. Microsoft Fixit print detected no problems. Help, please.

  Hi Baccy138,

  See the methods mentioned below and check:
  Diagnose and automatically fix the Windows USB problems
  http://support.Microsoft.com/mats/Windows_USB_diagnostics/
   
  Try to download and update the drivers manually from this site:
  http://support.Lexmark.com/index?segment=support&UserLocale=en_US&locale=en&ProductCode=LEXMARK_Z1300&page=product&FromPage=null#1
  1. click on the above link and click the menu drop down and select Windows.
  2. Select the version of operating system like Windows 7 and check the bit as a result.
  3. Download complete drivers and install it.
   
  Hope this information helps.

• Problem with InfoPath via the Adobe pdf printer print

  Hello

  It seems that in some cases to the printer Adobe pdf makes the text box a little narrower than THE InfoPath. So we have packaging Word and number of lines in the PDF can be only in the InfoPath form. But the output area is not resolved. So the end of the text may be corrupted:

  

  I checked this approach, but it does not help:

  https://helpx.Adobe.com/Acrobat/KB/missing-or-garbled-text-printing.html

  The same behavior is with different IEs.

  Could you please help to solve this problem?

  Must be a bug in InfoPath from the Adobe PDF printer simply reports the available printer box and print what they say in print, where it says print. Could be a problem with the printer driver change. Try to set default Adobe PDF before you start InfoPath, might work.

• Problem with the HP Officejet Pro 8500 printer: clean the print heads each time it is turned on

  Hello everyone,

  the printer HP all-in-one Officejet Pro 8500 (A909a - product n. CB022A) clean the print heads whenever I turn it on. This problem affects any HP Officejet Pro 8500 printer, it is not a problem only of this one I bought. It is a boring bug and annoying because each power clean print heads on involves two bad disadvantages:

  1. waste of ink (each heads cleaning process consumes little ink);
  2. too much time (2-3 minutes) to prepare the printer after plugging.

  I upgraded my printer with the latest firmware available on the HP site (firmware ver. DLM1FN1006BR), but the bug is still present.

  At this point, I ask:

  1. There is a way (or procedure) to disable automatic cleaning this useless to all power on?
  2. Can we communicate with the HP engineers or tell me how to contact directly one of them to indicate the bug and request a new firmware updated?

  Please don't tell me to leave the printer on all the time or that the printheads to each cleaning power is normal behavior! Where then are power and ink savings claimed for this printer model?

  I hope that a solution to this problem. Thanks in advance to everyone will help me!

  Maintenance when the printer is turned on is normal and is required to keep the printheads in good health (not blocked). See here for more information.

  With respect to energy savings, the printer automatically goes to low power mode when the don't feel not for awhile.  It is not necessary turn the unit on to save energy.

• I have a problem with the HP Deskjet2545 do not print on the computer.

  Printer does not print. Computer says "printer error". Convenience store said that the problem is resolved. The printer is 'ready' doesnot even impression. What is the solution?

  Original title: hpDeskjet2545.

  Hi Matt,

  Thanks for posting your query in the Microsoft Community.

  Printers to print documents, photos, cards and calendars. You have a problem with the printer doesn't work is not on the computer. It can be difficult when something that is important to you does not work as expected. It's pretty simple and we're here to help you solve the problem. We work as a team and get this sorted out.

  Please answer these questions-

  (1) what is the exact error message?

  (2) have you tried the troubleshooting steps?

  (3) what is the version of Windows installed on the computer?

  (4) have you made changes on the computer before the show?

  I would like more information about the issue.

  Note: assuming that you are running Windows 7, I would like to suggest some troubleshooting steps.

  Method 1-

  I would have you look at the article-

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 2-

  I wish that you uninstall and reinstall the printer.

  See the article-

  Install a printer

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Method 3-

  I would have you go through the troubleshooting proposed by HP guide.

  Check out the link-

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_task=solveCategory&LC=en&DLC=en&cc=us&product=3571292

  Let us know if you need assistance regarding the issue. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.

  Thank you.

• problem with my iMac?

  On my iMac 27 "screen keeps flashing black and it becomes more common.  Why would he do that?  It is likely to fail completely?  How can I fix it please?

  I've posted this before, but nobody seems to have answered.  Is there someone out there who can give advice on this please?

  sosunnyme wrote:

  Why would he do that?  It is likely to fail completely?

  If it will not screensaver, then it is very likely a hardware problem.

  How can I fix it please?

  Make an appointment with a service to your Apple Store or FSAA.

  To find the location of the Service, go to > https://locate.apple.com/

• Problems with error 1053 and start my printer spooler

  Hi, I also got an error 1053 come when I am trying to install my new Canon MP250 printer to my laptop with Windows 7 installed.

  Can anyone help?

  Hello

  A 1053 would occur if the service does not correctly record his status as started with the service control manager.

  Difficulty for the spooler service dependency information from and then restart the print spooler service and check if it helps.

  Step 1: difficulty for the spooler service dependency information

  Click Start, run and type the following text:

  CMD /K SC CONFIG SPOOLER DEPEND = RPCSS

  Alternatively, to achieve this by using the Registry Editor:

  1. click on start, run and type Regedit.exe
  2. navigate to the following branch
  HKEY_LOCAL_MACHINE-SYSTEM-CurrentControlSet-Services-spooler
  3. in the right pane, double-click the DependOnService value
  4. remove the existing data and then type RPCSS
  5. close Regedit.exe

  Important This method contains steps that tell you how to modify the registry. However, serious problems can occur if you change the registry
  incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then, you can
  restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to display
  the article in the Microsoft Knowledge Base:

  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry  

  Step 2: restart the spooler service print;

  Follow the instructions below to start the Printer Spooler service.

  1. click on start.
  2. type services.msc in the search to start.
  3. right click on the Printer Spooler service and click Start.
  4. on the general tab, next to startup type, make sure that automatic is selected.

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  You can also check this thread for more suggestions:

  http://social.answers.Microsoft.com/forums/en-us/w7hardware/thread/38b019cf-44BF-4123-A39E-09c025f89da9/

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem with my all-in-one c309a print - prints not bed.

  I erased a jam in tray by pulling the rear paper on top by force.  Now the printer is trying to find a document in the feeder (pins turn, racing) and will not recognize a print job on the glass.  He throws a sheet Virgin the platen.  Is there any solution for this?

  I think so... Go to hp.com, C309a, solve a problem, the jams and the problems of food and go through the solutions here. The "Original Jam, clear Jam and press OK... article has been most useful, but one of the others also applies.»

  The printer still considers that there is something in the ADF, then don't look at the bed first. The foregoing can fix that.

  Chris W.

• Problems with the Wi - Fi for HP printer

  When I right click to select my default HP printer, the 'default select' choice is not available to me

  Moved from feedback
  Windows version not specified

  You will find support for your problems of connection in the appropriate forum of networking: http://answers.microsoft.com/en-us/windows/forum/networking

• problem with image and pdf files to print

  Hello

  When I want to print images and PDF files in windows 7, it takes too much RAM space so small capacity it has (for example, the file has 52 KB capacity, but it takes 21 MB of RAM)

  

  and I have to wait until this file (image or PDF) completely buffered in RAM, and that is problematic for me.

  Help me please.

  Thank you

  Hello Amirafshari,

  Thanks for posting your query on the Microsoft Community.

  We need to know the following information to isolate the problem:

  1. When you print files no PDF, you have the same problem?
  2. What are the specs of your PC?
  3. Where are the files located? Is this an internal or external storage device?
     • If the file is located in your external storage space, you can transfer into your internal storage space first before printing.
  4. Have you tried the activation and deactivation of your print spooler? If this isn't the case, please follow the steps below:
     • Go to CMD.
     • Type "net stop spooler" and press ENTER to stop the spooler.
     • Type "net start spooler" and press ENTER to re start the spooler.

  Let us know how things are going.

  Kind regards

  Jamille Nar

• I have a problem with the user account control restricting printing.

  Original title: problem of UAC Restriction...

  In fact, this problem only occurs on Windows 7 / Vista including our field is now progressing to it. The problem is that we still use an OLD way for ourselves print documents by a former software which will form the LPT port. We used to map the BP turbine as: "net use LPT3: \\print_server\printer / persistent: Yes.

  EVERYTHINS works correctly, the fact is that we can mount the printer on LPT port, but we cannot print on it. The only way we found to make it work is by disabling that turned off.

  Is it possible to change this and to let any user print to an LPT port, even if UAC is the highest value?

  I thank you for your answer and have a nice day!

  In fact, was how I managed to solve this problem by defining the rights for users to C:\Windows\system32\spool folder on the print server.

  In this case the UAC asking for something.

• Display problems with the iMac

  

  The latest version of PS CC 2014 and 2015 is now made of images like that.  This happens usually when I have already some open images.  I have this iMac for more than three years and it is that recently I've had this problem.  I removed all my plugins NIC has even thought that they have not been installed.

  Sometimes using the maginifier to resize the image, helps, but just as often it is not.

  I work in PS every day and I am constantly seeing that.  It's not fun.

  What is the answer in this thread help? https://forums.Adobe.com/thread/1855166?q=black%20and%20White%20squares