Problems with attachments Manager

Similar Questions

• Problem with Lifedrive Manager on a Machine MS Vista

  I used my Lifedrive for a long time since a MS Windows XP Home Office successfully.  This summer, I got a new laptop which has Windows Vista Home Premium.  I am able to use the Palm Desktop software and hotsync for the XP desktop and laptop of Vista.  I am, however, problems with Lifedrive Manager.  Whenever I start the laptop, I get a message that the machine could not initialize "PalmOneRemoteLibrary."  I ignored the message because I could do everything I needed up to today.  When I tried to start the LifeDrive Manager (impetus provided by a message that asked that I install my photos using LifeDrive Manager), I got the PalmOneRemoteLibrary error message.

  I realize that this machine can be a relic, but I really like it, and I did a lot of use of it.  My LifeDrive machine runs Palm OS Garnet 5.4.8.  I recently put a mass of images on the internal drive using 'Training Mode'.

  Am I correct the LifeDrive Manager is inevitably incompatible with Windows Vista, and which is the source of my problem?  Any difficulty that I could try?  Any other ideas?

  Hello blue8star and welcome to the forums of Palm.

  The LifeDrive Manager application, unfortunately, is not compatible with Windows Vista.  Palm said they aren't going to release a update for the abandoned PDA.  (By the way, I have a palmOne LifeDrive and always use it often.)

  To load on the LifeDrive bulk data, you have the right idea, use the Drive Mode.

  Alan G

  Message is about: Treo 755 p (Sprint)

• Problem with disk management.

  To increase the size of drive, I installed win 7 64 bit from a cloned on a WD Green 3 TB hard drive backup.  When I go to disk management I have the following: Disk 0: base / system reserve 1.87 GB NTFS healthy, "C:" 2046,13 GB NTFS healthy, no Boot affected 746,52 GB.

  I could not wish 'C' in the unallocated space.  Is this possible and if so, what is the procedure?

  Thanks for the help

  There is a specific problem with windows that imposes a limit of 2 GB on hard drives. This can be overcome by using a GPT partition table, but then needs a UEFI BIOS in order to boot from it.

• Problems with the management of the CSC/Cisco (associated with SSO) site

  Dear friends,

  I came across a problem with single sign - on (SSO) used in the Cisco's Web site and CSC which begins to be more and more awkward:

  1. I visit the CSC and connect you to reply to a thread. Then I start to reply to a message.
  2. In response, I need to consult the technical documentation, guides, configuration or other documents on Cisco's Web site. In another tab in my browser, I visit the Cisco's Web site and do my search/navigation.
  3. At some point, Cisco's Web site acknowledges that I am already connected to the CSC and begins to produce URLs with the /partner/ inside component (for example in the search results). By clicking on this URL causes me be redirected to the page of connection again. This is the first question - why do I have to log in again because I am already connected and SSO is supposed to take care of this?
  4. Well, I re-enter my credentials, get connected, access the necessary document, then I go back to my post on the CSC, finish it and submit it. KABOOM - CCS quickly informs me that I am without permission to perform this action, lose my answer in the process! Logging on to the Web site (as described in step 3) Cisco obviously invalid my current session on CSC! I need to connect again to the SCC (until I do that, she considers me as a guest once again, but when I click on the login link, I suddenly make me connected without enter my credentials) and, well, write again my answer. Sometimes, a part is recoverable, but usually, it is only a small fragment.

  Would it not be possible to correct this behavior? I lost a lot of time my lost rewrite responses.

  Best regards

  Peter

  Hi Peter,.

  I wanted to give you a quick update on the two issues.

  First question:

  We are currently working on a long term and short fix for this problem. Unfortunately the long-term solution will be a drawn out effort as we begin our new data of all content in our heritage Center. The team is currently testing the short-term solution, will keep you posted on the progress that I get more details.

  Second question:

  We currently do analysis of the root causes of this problem and give you updated each week on this issue that deploy us the patch.

  Thanks a lot again for you continued support and patience.

  Sainaba.

• Problem with creative management account?

  I've been on creative cloud since 01/01/2016 (LR & PS). Last month, I receive a notice from Adobe everytime I open LR, indicating that there is a problem with my account plan and my last payment (June) has not been charged. NO explanation of what the issue actually is, I checked my card information of credit on my account plan, everything correct, even entered the details to make sure.

  Continue to receive this error notice, without any explanation, with the addition of a meter running backward until my account will cease to be active.

  I now have 6 days left.

  I was twice in contact with Adobe helpdesk, twice they promised the team counts would return to me by e-mail.

  So far - no email, no responses, don't explain - and the meter keeps running!

  Use a browser that allows cookies and pop-up windows, please contact adobe for hourly pst support by clicking here and, when it is available, click "still need help," http://helpx.adobe.com/x-productkb/global/service-ccm.html

• Problem with Maintenance Manager

  Hello

  I have a Lenovo T61 6457-E3G wth Windows XP. Windows is updated on the latest version available and therefore the lenovo software too.

  Weeks, the problem began:

  • When I shut down the computer the task of Lenovo: 'AWAYSCH' cannot be closed by windows. (So I have to do this on my shot of each stop down)
  • Also failed to start the Maintenance Manager (I pressed the button the Maintenance Manager, but the program does not start, without a description of the problem).

  Can some help me?

  Please refer to this URL: http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70681

  Seems "AwaySch.exe" can't not T61s with Intel GM965 video. This could explain why the application will not launch.

• Problems with Recovery Manager and wireless

  Hey everybody,

  I have an a HP Pavilion dv7-1245dx with Vista 64 bit.

  My HARD drive crashed after that the computer was hit. I bought a replacement hard drive, but could not use the HP Recovery Manager because my recovery disks were lost when I recently moved into a new House.

  I managed to get the Vista desktop of base up and running again, but without video card or wireless capability. To resolve this problem, I tried to re - install my drivers for hardware manually via

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2100&LC=en&cc=us&DLC=en&sw_lang=&product=3860...

  However, whenever I try to install Recovery Manager, I get say an error message: "this Setup program cannot be installed on this system, Installation with abandon!" InstallShield.

  Also, I tried to download and install all drivers wireless on the HP site, but I can't always operational wireless capability. Even after that I installed all drivers, Device Manager still does not recognize the wireless device.

  Any thoughts on solutions to these problems? Buy the HP recovery disk or install a new operating system Windows 7 would help solve these problems? Is it possible any other hardware become damaged when the computer was hit, and that is what causes these problems? Thank you.

  -NDEco

  Vidya,

  This problem solved-I had the drivers for the wireless and then updated the rest of the material from there. Thanks again for your help!

  -NDEco

• Strange problem with call manager and call before all

  Not sure whether this post about unity for or CCM. I will post on both. I have a main number customers dial in. When they call this number and they do not get a response, it passes to a call handler. This call handler has an option of entry of the appellant 3. If they hit option is three transfers to an IP phone on Call Manager who is assigned to the CFA for this cell phone to people. Everything works except when the call is sent to the PSTN it sounds for time and then disconnects. This number can be called directly from the system with no problem. The cause of the disconnection on debugging is the following: because I = 0x80FF - error of interconnection of networks; not specified. Please help if you can.

  I assume you are using version transfers here. You can give it a whirl with supervised transfers?

• Problem With nested Manager in DialogFieldManager

  I display successfully a PopupScreen with an icon, title, two fields of line and two buttons to the right places.  I do this by calling the constructor of PopupScreen with DialogFieldManager

  The problem is fixed height BasicEditField as I am trying to add.  There is space for the BasicEditField, but the BasicEditField is not.

  Here is the code I use.  Note: I left the ButtonField and FieldChangeListener code to stay brief.  I also tried to use customManager.add () instead of delegateFieldManager.addCustomField ()... or work:

       eflink = new EditField("", link);
          efname = new EditField("", "");
          befd = new BasicEditField("", "")
          {
              public int getPreferredHeight()
              {
                  return 60;
              }
          };
          dsm = dfm.getCustomManager();
          hfm = new HorizontalFieldManager(Manager.FIELD_HCENTER);
          tvfm = new VerticalFieldManager(Manager.VERTICAL_SCROLL)
          {
              protected void sublayout( int maxWidth, int maxHeight )
              {
                  int width = maxWidth;
                  int height = maxHeight;
                  width = dfm.getWidth();
                  height = dfm.getHeight() + befd.getPreferredHeight();
                  // super.sublayout( width, height);
                  setExtent( width, height);
              }
          };
          dfm.addCustomField(eflink);
          dfm.addCustomField(efname);
          //
          tvfm.add(befd);
          hfm.add(post);
          hfm.add(cancel);
          dfm.addCustomField(tvfm);
          dfm.addCustomField(hfm);
       }
  

  Can you see what I'm doing wrong?

  Solved!

  I took the code of this doc, deleted the reference EditField and adding a field to the constructor parameter.

  I then used the custom manager that results in place of the VerticalFieldManager in my previous code... using the fixed EditField as the field to the Manager constructor arg custom.

• Problem with attachments blackBerry Smartphones (PDF format)

  Hi all I need your help.

  I bought a new BB Curve 9360 and transferred the datas of an old BB using Desktop Manager

  I have two strange (for me problems):

  -If I try to open an attachment (especially PDFs) I get an error "application already sent. Send again? »

  -new electronic mail messages is displayed in all of the envelope only and non-envelope @domain.it

  Bye and soon of the Italy, Bruno

  Hello and welcome to the community!

  I suggest the following, in order, even if they seem redundant to what you have already tried (steps 1 and 2, each should result in a message to your BB to come...) Please wait for this before moving on to the next step):

  (1) registry HRT

  • KB00510 How to register a BlackBerry smartphone with wireless network
  • Please wait a 'registration' message reach your Messages application

  (2) remove and return Service directories

  • KB05000 Remove the maintenance book for the BlackBerry Internet Service email account in the BlackBerry smartphone
  • If you do not have access CMIME, continue deleting
  • KB02830 Send the directories for the BlackBerry Internet Service
  • Please wait "the Activation' Messages, one per already configured e-mail account, arrive in your Messages. If you have not already configured email accounts, please wait 1 hour.

  (3) restart to take batt

  • Each time a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  I hope that will move things again for you! If not, then you should try remove and re-add your BIS configuration for these accounts. Otherwise, you should contact your mobile provider for formal support.

  Good luck!

• IPSEC VPN from Site to Site - NAT problem with address management

  Hi all

  I have two Cisco ASA 5505 performing of IPSEC Site to Site VPN. All traffic inside each firewall through the VPN tunnel and I have full connectivity. From site A, I can connect to the inside address of the ASA at the site B and launch of the ASDM or SSH, etc.

  The problem I have is when I'm logged on the ASA site B management traffic is given the external address. I created this as interesting traffic to get it to go through the VPN but I need to use the inside address of ASA B. The following is possible:

  • If I can make the ASA Site B to use inside interface as its address management (I already have management access to the inside Interface)
  • I have NAT can address external interfaces to Site B before moving through the VPN tunnel management traffic so that it appears to come from Site B inside the address
  • I can NAT VPN traffic as it appears in the Site A for management traffic to Site B on the right address.

  The problem is that my PRACTICE Please also come from this address and I need the application before being on an internal address to even if my CA.

  Thanks for any help.

  Ian

  Thanks, I understand what you are trying to achieve now.

  However, I think that I don't have good news for you. Unfortunately PEIE request can be initiated of the SAA within the interface, as there is no option to start the query from the inside interface. With other features of management such as AAA, logging, you have an option to specify what ASA desired originally to demand from interface, but CEP doesn't have this option.

  Here's how you can configure under the trustpoint crypto, but unfortunately by specifying the interface doesn't not part of option:

  http://www.Cisco.com/en/us/docs/security/ASA/asa84/command/reference/C5.html#wp2262210

• Problem with Update Manager

  My system is running on VMware vSphere 5.1 (most recent) U1.

  I tried to update the host ESX (host State), but it failed with the error message:

  Patches of the scene to entity rvc-esx-01

  The host returns esxupdate error code: 15. The package manager transaction is not successful. Check the Update Manager logs and logs esxupdate for more details.

  I checked the esxupdate.log and there are many messages of error as follows. Please help me to identify the problem.

  I thank you very much.

  2013 05-28 T 06: 48:27Z esxupdate: HostInfo: DEBUG: check the file system on altbootbank...

  2013 05-28 T 06: 48:27Z esxupdate: vmware.runcommand: INFO: RunCommand called with: args = "[' / sbin/dosfsck ', '-a ', '-v ',' / dev/disks/naa.600508b1001cfd08a4849f06984fd8a2:5'] ', outfile = 'None', returnoutput = 'True', timeout ="0,0 "."

  2013 05-28 T 06: 48:27Z esxupdate: HostInfo: DEBUG: dosfsck dating 1

  Output: dosfsck 2.11 (March 12, 2005)

  dosfsck 2.11, 12 March 2005, FAT32, LFN

  Check the last sector of the file system, we can access

  Content of boot sector:

  ID of the system "MSDOS5.0".

  Byte media 0xf8 (hard drive)

  512 bytes / logical sector

  4096 bytes per cluster

  2 areas

  First FAT starts at byte 1024 (sector 2)

  2 fatty acids, 16-bit entries

  128000 bytes per FAT (= 250 sectors)

  Root directory begins at byte 257024 (district 502)

  512 root directory entries

  Data area starts at byte 273408 (sector 534)

  63929 data clusters (261853184 bytes)

  64 heads, 32 sectors/track

  0 hidden sectors

  total 511968 areas

  Fats are distinguished, but seem to be intact. Using FAT first.

  imgdb.tgz

  Contains a free cluster (39115). Assuming that the expressions of folklore.

  imgdb.tgz

  File size is 32029 bytes, the length of string cluster is 0 bytes.

  Truncate a file of 0 bytes.

  s.V00

  File size is 119879581 bytes, the length of string cluster is 109858816 bytes.

  File truncation

  2013 05-28 T 06: 48:27Z esxupdate: esxupdate: ERROR: an exception error esxupdate was taken:

  2013 05-28 T 06: 48:27Z esxupdate: esxupdate: ERROR: Traceback (most recent call changed):

  2013 05-28 T 06: 48:27Z esxupdate: esxupdate: ERROR: file ' / usr/sbin/esxupdate ", line 216, hand-held

  2013 05-28 T 06: 48:27Z esxupdate: esxupdate: ERROR: cmd. Run()

  2013 05-28 T 06: 48:27Z esxupdate: esxupdate: ERROR: File "/ build/mts/release/bora-1065491/bora/build/esx/release/vmvisor/sys/lib/python2.6/site-packages/vmware/esx5update/Cmdline.py", line 144, in the term

  2013 05-28 T 06: 48:27Z esxupdate: esxupdate: ERROR: File "/ build/mts/release/bora-1065491/bora/build/esx/release/vmvisor/sys/lib/python2.6/site-packages/vmware/esximage/Transaction.py", line 243, in InstallVibsFromSources

  2013 05-28 T 06: 48:27Z esxupdate: esxupdate: ERROR: File "/ build/mts/release/bora-1065491/bora/build/esx/release/vmvisor/sys/lib/python2.6/site-packages/vmware/esximage/Transaction.py", line 345, in _installVibs

  2013 05-28 T 06: 48:27Z esxupdate: esxupdate: ERROR: File "/ build/mts/release/bora-1065491/bora/build/esx/release/vmvisor/sys/lib/python2.6/site-packages/vmware/esximage/Transaction.py", line 388, in _validateAndInstallProfile

  2013 05-28 T 06: 48:27Z esxupdate: esxupdate: ERROR: File "/ build/mts/release/bora-1065491/bora/build/esx/release/vmvisor/sys/lib/python2.6/site-packages/vmware/esximage/HostImage.py", line 639, at the stage

  2013 05-28 T 06: 48:27Z esxupdate: esxupdate: ERROR: File "/ build/mts/release/bora-1065491/bora/build/esx/release/vmvisor/sys/lib/python2.6/site-packages/vmware/esximage/Installer/BootBankInstaller.py", line 672 in StartTransaction

  2013 05-28 T 06: 48:27Z esxupdate: esxupdate: ERROR: File "/ build/mts/release/bora-1065491/bora/build/esx/release/vmvisor/sys/lib/python2.6/site-packages/vmware/esximage/Installer/BootBankInstaller.py", line 302, in Recover

  2013 05-28 T 06: 48:27Z esxupdate: esxupdate: ERROR: InstallationError: ("," there was a file system on altbootbank of error checking, see log for details ".)

  2013 05-28 T 06: 48:27Z esxupdate: esxupdate: DEBUG: < < <

  2013 05-28 T 06: 48:32Z esxupdate: vmware.runcommand: INFO: RunCommand called with: args = ' [' / sbin/esxcfg-advcfg ', '-q', '-g', ' / UserVars/EsximageNetTimeout "]', outfile = 'None', returnoutput = 'True', timeout ="0.0 ".

  2013 05-28 T 06: 48:32Z esxupdate: vmware.runcommand: INFO: RunCommand called with: args = ' [' / sbin/esxcfg-advcfg ', '-q', '-g', ' / UserVars/EsximageNetRetries "]', outfile = 'None', returnoutput = 'True', timeout ="0.0 ".

  2013 05-28 T 06: 48:32Z esxupdate: vmware.runcommand: INFO: RunCommand called with: args = ' [' / sbin/esxcfg-advcfg ', '-q', '-g', ' / UserVars/EsximageNetRateLimit "]', outfile = 'None', returnoutput = 'True', timeout ="0.0 ".

  2013 05-28 T 06: 48:32Z esxupdate: esxupdate: INFO: -.

  Command: scan

  Args: ["scan"]

  Options: {'nosigcheck': zero, 'Retry': 5, "loglevel": zero, 'cleancache': None, 'viburls': zero, 'meta': ['http://172.29.137.20:9084/vum/repository/hostupdate/csco/csco-VEM-5.1.0-metadata.zip','http://172.29.137.20:9084/vum/repository/hostupdate/vmw/vmw-ESXi-5.1.0-metadata.zip'], 'proxyurl': None, 'timeout': 30.0, "cachesize": zero, "Valentina": True, 'maintenancemode': None}

  2013 05-28 T 06: 48:32Z esxupdate: BootBankInstaller.pyc: INFO: value not recognized 'title = loading VMware ESXi' in boot.cfg

  2013 05-28 T 06: 48:32Z esxupdate: BootBankInstaller.pyc: INFO: /altbootbank/boot.cfg: bootstate goes from 0 to 3

  2013 05-28 T 06: 48:33Z esxupdate: vmware.runcommand: INFO: RunCommand called with: args = "[' / sbin/bootOption ', '-rp'] ', outfile = 'None', returnoutput = 'True', timeout ="0,0 "."

  2013 05-28 T 06: 48:33Z esxupdate: vmware.runcommand: INFO: RunCommand called with: args = "[' / sbin/bootOption ', '-ro'] ', outfile = 'None', returnoutput = 'True', timeout ="0,0 "."

  2013-05 - 28 T 06: 48:33Z esxupdate: downloader: DEBUG: download http://172.29.137.20:9084/VUM/repository/hostupdate/CSCO/CSCO-VEM-5.1.0-metadata.zip to/tmp/tmprZ4JfI...

  2013 05-28 T 06: 48:33Z esxupdate: Metadata.pyc: INFO: unknown file vendor - index.xml in the metadata file

  2013-05 - 28 T 06: 48:33Z esxupdate: downloader: DEBUG: download http://172.29.137.20:9084/VUM/repository/hostupdate/VMW/VMW-ESXi-5.1.0-metadata.zip to/tmp/tmpytjFZI...

  2013 05-28 T 06: 48:33Z esxupdate: Metadata.pyc: INFO: unknown file vendor - index.xml in the metadata file

  2013 05-28 T 06: 48:33Z esxupdate: BootBankInstaller.pyc: INFO: value not recognized 'title = loading VMware ESXi' in boot.cfg

  2013 05-28 T 06: 48:33Z esxupdate: BootBankInstaller.pyc: INFO: /altbootbank/boot.cfg: bootstate goes from 0 to 3

  2013 05-28 T 06: 48:33Z esxupdate: vmware.runcommand: INFO: RunCommand called with: args = ' [' / usr/sbin/vsish ', '-e', '-p', 'cat', ' / hardware/bios/dmiInfo "]', outfile = 'None', returnoutput = 'True', timeout ="0.0 ".

  2013 05-28 T 06: 48:33Z esxupdate: esxupdate: INFO: everything is done!

  2013 05-28 T 06: 48:33Z esxupdate: esxupdate: DEBUG: < < <

  Yes run command now below.

  dosfsck - a w /vmfs/devices/disks/naa.600508b1001cfd08a4849f06984fd8a2:5

• problem with Update Manager 4.1u1

  When I upgrade from Esxi host I have problem: clean failed for xxx.xxx.xxx.xxx
  SingleHostRemediate: Cannot download Vibs.error

  Help, please

  JP

  The log files that the last days would be sufficient

  Newspaper:

  Connect to https://hostupdate.vmware.com/software/VUM/PRODUCTION/main/esx/vmw/embeddedEsx/4.1.0/ESXi-4.1.0-patch04/vmware-esx-tools-light-4.1.0-2.18.582267.i386.vib with off proxy failed: error 12002 of WinHttpQueryDataAvailable for the url https://hostupdate.vmware.com/software/VUM/PRODUCTION/main/esx/vmw/embeddedEsx/4.1.0/ESXi-4.1.0-patch04/vmware-esx-tools-light-4.1.0-2.18.582267.i386.vib

  and below

  Download {323612704} job execution throws the error message: download limit of attempts reached

  It seems that you have a network problem,

  As troubleshooting step I suggest

  (1) verify that you download this vib by browser (vmware & moustapha sites should be in trusted sites).

  (2) test change the timeout value (steps in article VMware vCenter Update Manager UMDS fails with the error: error 12002 WinHttpReceiveResponse to url )

• Problems with Adobe Manager help (from Creative Suites 6)

  I have trouble downloading the help of Creative Suites Master Collection (for Mac). Initially, if I understand correctly, help for most of the products is not installed and it must be downloaded through Adobe help Manager (AHM), which comes with CS6.

  Whenever I ran this application it states: "Please wait while the downloaded files are checked. Extraction of large files may take several minutes. "Well, I had it running all night, and it still has this message up. No indication AHM doing anything whatsoever, even if sometimes the State of one of the applications of 'awaiting integration' to 'current '. But even after 8 to 10 hours, the help files size less than 2 MB is still not unpacked.

  It doesn't seem to be any information on the forums. There is a technical note indicating that the application works, but in order to exercise patience. Well, I think 30 minutes is patient, from one day to the next day (after several attempts) is not to be patient. It's broken.

  Can you please try the download option listed in the Adobe help Manager | Resolve error codes - http://helpx.adobe.com/creative-suite/kb/help-manager-troubleshoot-error-codes.html to see if it solves your problems.

• Problem with Recovery Manager (recovery failed)

  Guys, I can't successfully complete my system recovery.

  Here is a detail of the event-by-event (I have a Pavilion DV5):

  -J' have Complete Recovery (recovery is complete appears...) "once the system reboots and you're done the first... »)
  -I restart
  -CMD.exe window appears
  -Software Installation HP window appears
  -It restarts, a black window with HP Logo, and then Microsoft Corporation (from windows)
  'Please wait while Windows configures your computer' (black screen)
  -Please wait while Windows continues installing the computer (blue screen)
  -Restarts again
  -black screen, mouse, windows logo appears, its beginning (home screen appears... Vista Home Premium)
  -Windows installation window... "Windows is now put in place the following:"
  Pre-PININST (check)
  Preinstall the installation software
  Pre-PININST2
  Preinstall the Software Installer 2
  Post PININST
  Check the power supply
  BurnBoot
  
  (All this with HP on the screen back with the gray validation bar)
  
  -Takes a long time to complete the second task (Preinstall Software Installer).
  -Restarts (disconnection, closing...)
  -New black screen, white pointer
  -Windows 'Welcome' screen again
  
  Now, when it is in the "Windows is now put in place the following:
  Pre-PININST2
  
  A Recovery Manager window appears saying that "the recovery attempt failed. Please select one of the following buttons:
  Constituent parts or try again
  
  When I hit the details, there are the following:
  -ChkErrBB.CMD: Detects an error in the PININST-PBO.
  -ChKErrBB.CMD: Check C:/system.sav/logs/BurnBootWarn.log
  
  I hit retry and the open CD and she has restarted the machine
  
  And once again returning to the "Welcome to the Recovery Manager" screen of origin.

  How can I solve this?

  Thank you

  I found far in front of her. Close the window with the 'X '. Do not hit try again or he'll just keep again. The box a few times during the process, but just keep hit X and it must cross. Worked for me!

  I don't know if there are features or missing files because of the errors, but the system seems to work very well so far.