Problems with drivers for Atheros Communications AR9565 Wireless Network Adapter
I recently downgraded my HP Pavilion windows 8 to 7 14b130ej. I can't find the drivers for the network adapters. I'd appreciate any help in this matter. Thank you very much!
Hello:
You need these drivers if you have a wireless atheros network card...
Wireless:
Bluetooth:
Tags: Notebooks
Similar Questions
-
Problems with drivers for laptop HP650
Hello
I have a problem with drivers for this model.
I have installed windows 7 32 bit, then removed all the drivers from the official website of HP, but a problem with the two drivers, PCI SIMPLE COMMUNICATIONS CONTROLLER and CONTROLLER ASSISTED, now I can't connect to Internet, LAN or wireless internet.Is there a solution?
Hello:
This is the driver you need for the PCI SCC.
In order to find the right driver for the wireless card (since there may be one of several different model wireless cards in your notebook), go to Device Manager and click on the network controller needing drivers and display the material for her ID.
If you don't know how to find the hardware ID, please read the info on the link below:
-
Hi, my laptop have this problem cannot connect to the internet, but the bar shows that I am connected to the network, but without access to the internet.
I tried someone's guide to uninstall the network adapter in Device Manager and then reinstall it again, but now I'm stuck with the laptop cannot even detect the wireless network and the "Qualcomm Atheros AR9485WB-EG Wireless Network Adapter ' on Device Manager displays this message"the device is not working properly because Windows cannot load the drivers required for this device. (Code 31)"
I forgot since when this problem persists.
Please help me with this problem of internet connection,
List of maybe / don't may not be the problem:
1. I had mcafee antivirus 3 weeks around which has already expired for about 50 days and I uninstalled to turn into kaspersky anti-virus
2. my windows is still 8.0
3 ASUS N56V
4. browser chrome incognito window
Thank you Mr President, I found a solution for this problem
I just turn on the download via connections counters my PC-> devices config->download via connections counters
and then I tried to enter the following command at the command prompt run as administrator
netsh int ip reset c:\resetlog.txt
I hope this helps anyone else having the same problem as mine
Thank you again Sir
-
Atheros AR5BWB222 MISSING wireless network adapter
I had to reinstall windows after a crash. When I upgraded to Windows 10, I lost the
Atheros AR5BWB222 wireless network adapter %.
I went back to windows 8 and it wasmissing it too? Where can I get this driver wihout pay $100?
The link I provide downloads the drivers on the Acer support site. It does not work when you clicked on my link?
-
Random disconnection on Atheros AR9002WB-1NG Wireless Network Adapter
Hi all
I have a problem doing my job in the internet due to random disconnection on the map of Atheros AR9002WB-1NG wireless network.Are there troubleshooting procedures to resolve these random disconnections?Windows 7 Home Premium SP1ASUS N43SLAtheros AR9002WB-1NGThank you.Hello
Try the steps in the following methods and check the status of the issue.
Method 1:
Configure the computer to clean start State to check software conflicts and check the status.
http://support.Microsoft.com/kb/929135
Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 of the article mentioned above.
Method 2:
Wi - Fi and in Windows network connection issues.
-
problem with drivers for laptop HP 3125
Good player, I have a hp laptop with material beats 3125 and soon then installed a new copy of windows 7 64 bit from a formatted USB drive but what opportunity wireless adapter does not work and windows aero also rated the computer laptop and all the graphics stuff was 1.0 and and so I think that I need the drivers for the hardware it please help thanks
Hello:
Here is the link to the support page and drivers for your laptop:
-
Problem with drivers for HP Pavilion 15-P017AX
I downgraded windows 8.1 on HP Pavilion 15-P017AX for Windows 7. I managed to install windows 7, but now I'm missing the drivers for it. If I check in the device, then under 'Other devices' Manager, there are yellow labels on:
1. network controller
PCI device
PCI encryption/decryption controller
SM Bus controller
(USB) Universal Serial Bus controller
Unknown device
Unknown device
Video controller
Can someone help me please?
I hope so too!
If not, I'll have to go explore the other some!
-
Problems with drivers for R720xd
Hello.
Y at - it a pack with all the necessary drivers? Or I have to download each manually?
Best regards.
Robin Nydahl
Hi Robin,
We will be happy to help you. The link the SUU (Dell Server Update utility, v.7.4) can be found here:
http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=4V8PPPleas see Setup Instructions below:
For Windows:
1. download the complete ISO file.
2. use the standard ISO, editing software and to mount the downloaded iso image.
3. navigate to the folder.
4. double-click on SUUlauncher.exe.For Linux:
1. download the complete ISO file.
2. use the standard ISO, editing software and to mount the downloaded iso image.
3. open the terminal and explore the folder where mounted the iso image is mounted.
4. run. / suu g to start the GUI.Note: This is NOT a bootable media.
Let us know how it works for you.
-
Hello
I would like your advice about my inability to scan from my printer control panel after establishing a connection USB with my PC. Previously, it was established as a wireless printer.
I get messages like "Scan of the computer is not activated", "connecting to the computer has been lost' & ' The HP scanning Application has encountered an internal error. Pls restart app & try again. "
There is no problem to use the HP scanning software in my PC for scanning or printing of my mobile device functions.
I tried different ways to solve problems for example to turn off my printer & restarted, print HP & Scan Doc, restart my PC but nothing is.
Your advice would be much appreciated.
Thank you.
Hi @Chrissy_61
Thanks for your comments.
If it is connected via the USB port the computer Scan is on the front of your printer default.
Go to your control panel and select "Scan to.." your computer should be listed.
Hope that helps!
-
Hi all
2.5 years ago I bought L-750d-159:
Video: AMD Radeon HD 6520G (TM)
Wireless: Atheros AR9002WB-1NG wireless network adapter
CPU: AMD A6 - 3400 M APU with graphics Radeon (TM) HD
RAM: 4 GB
OS: Windows 7 Home Edition SP1, 64-bit.
BIOS: 2.1For the majority of the last 2.5 years I had the same questions, alternating between them over and over again without solution in sight.
Repetition of questions: *.
1. wireless adapter goes dead, no help of the troubleshooter in windows. Only restart help to, rarely he demans restart another. at the same time #2 arrives:2. cannot read USB (IE external HARD disk). allows you to restart.
3. wireless mouse does not respond. Randomly, reset help.
4 gel. Sometimes, when there is nothing running in the background. Of course, hard restart (only power button)
5. office freeze.not always, but if he gets in the mood, he could go the days where minutes after I start the 'word' it would just freeze. Hard reset again.
6. "atikmpag' blue screen. After not having it for a long time, I started just have it again.
7 power supply and battery issues:
7.1 with battery:
Suddenly load stops. disconnect and reconnect do not help.
Fresh only when the computer is turned off.7.2 without battery:
Instant stop. Usually when you use Chrome.These issues are alternating, everyday sense I get something else, without a prescription for them that I noticed.
* How to try to remedy: *.
1. updated all the drivers for the toshiba page.
[Page drivers Toshiba | http://www.toshiba.co.il/innovation/download_drivers_bios.jsp]2. update the BIOS. I do this cotton after having feeding problems, not so useful.
3. formatting and reinsalled Windows 7 to factory settings.
I am sure that there is a solution out there, the computer itself works fine for me (when it works) and I will not buy a new one, until it falls dead (I could give a year or two).
Are you guys famliar with these questions?
Here are the proven solutions for this model?
Post edited by: fish85
> 1. Wireless adapter goes dead, no help of the troubleshooter in windows. Only restart help to, rarely he demans restart another.
WLan problems could appear for different reasons. I don t think that it is a WLan driver problem. I think that you should just check the WiFi configuration.
For example, you should check whether changing the WiFi 1-11 channel would improve performance. Also change the settings for encryption (WPA/WP2-AES, TKIP) is worth trying.
Turn off all the settings for the WLan to save energy and check if there is a difference if you turn off the WLan mouse.> 2. Cannot read USB (IE external HARD disk). allows you to restart.
Also the issue of USB can be related to energy saving settings.
In the Device Manager-> USB Controllers-> properties-> tab power management option that allows the system to power off the device to save power.> blue screen "atikmpag. After not having it for a long time, I started just have it again.
This file/process is tied to the ATI graphics card. Try to use the latest graphics card driver. An update is recommended in this case.Battery issues:
Well, sooner or later each battery must be replaced. I put t know if your battery is malfunctioning but probably new battery would help to resolve the issue
In addition, to remove and uninstall the device control method battery Microsoft acpi located in Device Manager. -
HP envy 15 notebook PC: driver HP Envy 15 Wireless Network adapt
I want driver for HP ENVY 15 wireless network adapter
REF: L0C92EA #ABV
Operating system: windows 7 Enterprise 64-bit
Hello:
You need these drivers wireless and bluetooth for this card...
Driver LAN wireless Broadcom
File name: sp69014.exe
Software and driver Broadcom Bluetooth 4.0
File name: sp66402.exe
-
Windows 8 problem with wireless network adapter
I had a lot of trouble to stay connected to the internet with my college wireless network on
my laptop Windows 8. Especially when my computer is endearing to load a large number of data, the connection becomes limited and stops working. I use the resolution of problems and there's always the wireless adapter, which always solve the problem. This problem will not occur on the unsecured network comments from school or home. I tried many solutions to solve the problem, as going to tab the wireless one adapter power management uncheck allow the computer to turn off this device to save power. nothing has worked so far. Here are the details of the detection of the troubleshooter from the last time that this problem occurred:
Details about network adapter diagnosis: Network adapter Wi-Fi driver information: Description . . . . . . . . . . : Dell Wireless 1704 802.11b/g/n (2.4GHz) Manufacturer . . . . . . . . . : Broadcom Provider . . . . . . . . . . . : Broadcom Version . . . . . . . . . . . : 6.30.59.74 Inf File Name . . . . . . . . . : C:\WINDOWS\INF\oem51.inf Inf File Date . . . . . . . . . : Monday, September 17, 2012 6:52:18 PM Section Name . . . . . . . . . : BCM1704HMD_NT62 Hardware ID . . . . . . . . . . : pci\ven_14e4&dev_4365&subsys_00161028 Instance Status Flags . . . . . : 0x180200a Device Manager Status Code . . : 0 IfType . . . . . . . . . . . . : 71 Physical Media Type . . . . . . : 9
Diagnostic information (wireless connectivity)Details about wireless connectivity diagnosis: Information for connection being diagnosed Interface GUID: 81887e6c-9ddc-413d-be6a-4465ad36cf87 Interface name: Dell Wireless 1704 802.11b/g/n (2.4GHz) Interface type: Native WiFi Connection incident diagnosed Auto Configuration ID: 1 Connection ID: 1 Connection status summary Connection started at: 2015-03-08 14:48:33-522 Profile match: Success Pre-Association: Success Association: Success Security and Authentication: Success List of visible access point(s): 7 item(s) total, 7 item(s) displayed BSSID BSS Type PHY Signal(dB) Chnl/freq SSID ------------------------------------------------------------------------- 28-8A-1C-FE-CA-80 Infra
-91 1 smcm-guest 28-8A-1C-FE-0D-80 Infra -50 1 smcm-guest 28-8A-1C-FE-0D-82 Infra -54 1 resnet 28-8A-1C-FE-B5-C0 Infra -48 6 smcm-guest 28-8A-1C-FE-B5-C2 Infra -47 6 resnet 28-8A-1C-FE-3F-40 Infra -91 6 smcm-guest 28-8A-1C-FE-3F-42 Infra -88 6 resnet Connection History Information for Auto Configuration ID 1 List of visible networks: 2 item(s) total, 2 item(s) displayed BSS Type PHY Security Signal(RSSI) Compatible SSID ------------------------------------------------------------------------------ Infra No 87 Yes smcm-guest Infra Yes 87 Yes resnet List of preferred networks: 5 item(s) Profile: mobilenet SSID: mobilenet SSID length: 9 Connection mode: Infra Security: No Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: NETGEAR30 SSID: NETGEAR30 SSID length: 9 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: Yeager Network SSID: Yeager Network SSID length: 14 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: resnet SSID: resnet SSID length: 6 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: Yes Profile: smcm-guest SSID: smcm-guest SSID length: 10 Connection mode: Infra Security: No Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028001 Information for Connection ID 1 Connection started at: 2015-03-08 14:48:33-522 Auto Configuration ID: 1 Profile: resnet SSID: resnet SSID length: 6 Connection mode: Infra Security: Yes Pre-Association and Association Connectivity settings provided by hardware manufacturer (IHV): No Security settings provided by hardware manufacturer (IHV): No Profile matches network requirements: Success Pre-association status: Success Association status: Success Last AP: 28-8a-1c-fe-b5-c2 Security and Authentication Configured security type: WPA2-802.1X Configured encryption type: CCMP(AES) 802.1X protocol: Yes Authentication mode: User only EAP type: Authentication not started Number of 802.1X restarts: 0 Number of 802.1X failures: 0 802.1X status: Success Key exchange initiated: Yes Unicast key received: Yes Multicast key received: Yes Number of security packets received: 13 Number of security packets sent: 13 Security attempt status: Success Connectivity Packet statistics Ndis Rx: 400791 Ndis Tx: 204956 Unicast decrypt success: 0 Multicast decrypt success: 0 Unicast decrypt failure: 0 Multicast decrypt failure: 0 Rx success: 1632 Rx failure: 846 Tx success: 240 Tx failure: 0 Tx retry: 24 Tx multiple retry: 12 Tx max lifetime exceeded: 0 Tx ACK failure: 60 Roaming history: 0 item(s) Diagnostic information (wireless connectivity)Details about wireless connectivity diagnosis: For complete information about this session see the wireless connectivity information event. Helper Class: Auto Configuration Initialize status: Success Information for connection being diagnosed Interface GUID: 81887e6c-9ddc-413d-be6a-4465ad36cf87 Interface name: Dell Wireless 1704 802.11b/g/n (2.4GHz) Interface type: Native WiFi Result of diagnosis: There may be problem
Diagnostic information (wireless network adapter)Details about wireless network adapter diagnosis: For complete information about this session see the wireless connectivity information event. Helper Class: Native WiFi MSM Initialize status: Success Information for connection being diagnosed Interface GUID: 81887e6c-9ddc-413d-be6a-4465ad36cf87 Interface name: Dell Wireless 1704 802.11b/g/n (2.4GHz) Interface type: Native WiFi Profile: resnet SSID: resnet SSID length: 6 Connection mode: Infra Security: Yes Connect even if network is not broadcasting: Yes Result of diagnosis: There may be problem
Thanks for any help! It happened for about eight months and it's really frustrating.
Hello
Check with Dell and Broadcom, their documentation diagnostics online and drivers.
and ask questions in the forums about known problems. The two Dell driver update, then
Broadcom if there is more recent.Dell support
http://support.Dell.com/Dell support drivers - product manual & warranty Info (left side) - and much more
http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHSDell forums
http://en.community.Dell.com/forums/Dell PC Diagnostics
http://www.Dell.com/support/Diagnostics/us/en/19/
Broadcom - downloads and Customer Support
http://www.Broadcom.com/support/==============================
More troubleshooting:
It is possible that the drivers you use, even if later now available, are not
100% Windows compatible 8.1. Check with the manufacturer of your system (motherboard support
Manufacturer of custom systems) and/or the manufacturer of the device. This one, like Intel,
RealTek, Atheros and others may have newer versions is not available to the mother of system
-site of the manufacturer on board. And continue to check in with them regularly over the next year.
Also update the BIOS, drivers from the chipset of low level and major embedded and separate
device drivers.Download your applications and devices in Windows 8.1
http://Windows.Microsoft.com/en-in/Windows-8/get-apps-devices-working=========================================================
Don't forget to check the updates of the firmware on the router, because who can have a definite effect
on connections Windows 8.1 same if other OS systems connections are fine.Check with support of the manufacturer of the system (motherboard for customized systems manufacturer) and/or
the manufacturer of real device driver updates. If there is no newer versions re - install the same
ones. Ask known in their forums (if any) problems.===================================
General resolution: (after the above if necessary)
Free Wi - Fi and wireless problems
http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1Note the use of Win Key + X and Win Key + W (to access control panel, run,
and settings according to needs). Win + D key calls to the office and use
Win Key activates / deactivates the desktop and start screen.--------------------------------------------------------------
Control Panel - Network and sharing Center - solve problems
References to Vista also apply to Windows 7 and Windows 8.
Your router be guess here, you have successfully updated the firmware a possible
solution? And I would update your WiFi drivers on computers. How far away are they
you have set in the router? Are there obstacles in the path?Actually try updating your driver and disabling the network logon.
Control Panel - network - write down of the brand and the model of the Wifi - double click
top - tab of the driver - write version - click on update driver (can't do
nothing that MS is far behind the certification of drivers). Then right click on the Wifi
Device and UNINSTALL - Reboot - it will refresh the driver stack.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmDownload - SAVE - go where you put it - right click – RUN AS ADMIN.
You can download several at once however restart after the installation of each of them.
After watching the system Maker you can see the same device manufacturer
more recent versions. (Those become your fonts of rescue system manufacturer).Repeat for network (NIC) card and is a good time to get the other update
Drivers Windows 8 like updated drivers.The adapter in Microsoft Windows 8/8.1 network problems - how to fix? (Do not forget to see
This section-> update the NIC driver).
http://Windows.Microsoft.com/en-us/Windows-8/fix-network-adapter-problemsDrivers and Microsoft - Windows 8/8.1 - material
http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8Microsoft Windows 8/8.1 - Why Windows is not find my device?
http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-deviceMicrosoft Windows 8/8.1 - what happens if a device is not installed correctly
http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly
------------------------------------------------------Make sure you know the details of connection to your wireless router - SSID and password.
You lose connection when you do and have to redo your logon.
Control Panel - Network & Sharing Center - set up a new connection or network
-----------------------------------------------------
And:
TechingItEasy - how to join a Wi - Fi network in Windows 8 by MVP Andre Da Costa
http://techingiteasy.WordPress.com/2012/06/09/how-to-join-a-Wi-Fi-network-in-Windows-8/Microsoft - Windows 8/8.1 - Web & Networking
http://Windows.Microsoft.com/en-us/Windows/Web-networking-help#V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1&Web-networking-help=Windows-8Microsoft - Windows 8/8.1 - Wi - Fi & Networking
http://Windows.Microsoft.com/en-us/Windows-8/WiFi-networking#1TC=T1-----------------------------------------------------
Microsoft - Windows 7 - Why is my Internet connection so slow? (applies to Windows 8)
http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slowMicrosoft - Windows 8/8.1 - wired and wireless in Windows problems
http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Satellite P15-8409, Atheros wireless network adapter problem
Hello. I'm having a frustrating problem with an old laptop Satellite P15. I restored the phone to default settings using the recovery disk that the system was working very badly. After that, the wireless network adapter has stopped working. In the Device Manager "Atheros AR5001X + Wireless Network Adapter" is marked with a yellow exclamation point. In the menu properties, under general, the State of the device the following is listed:
The device cannot find enough free resources that it can use (code 12)
The operating system is Windows XP Home Edition. The same problem has been present in SP1, SP2 and SP3. I also updated the BIOS to V2, but it also did not help.
At work, we use a wireless internet connection. At home, I have a DSL connection. Curiously, when I plugged the network cable to the House, the yellow exclamation mark disappeared and a wireless connection icon appeared in the network connections window. I assumed that the problem has been resolved by updating to Windows; However when I brought the computer in the office, the wireless adapter was once more in the State I described.
I searched the internet for the same problem, but was unable to find anything. I would be very happy to help.
all the best,
James
BIOS version is installed on your machine? And you have you recently changed some hardware etc...?
I don't know what it could be, but in the worst cases, the wlan card has certain shortcomings. You can check this by getting somewhere such an atheros wlan card or intel and install it instead of the one installed.
Maybe the exchange of cards should solve this problem?
Welcome them
-
HP Pavilion g6-1d28dx drivers for laptop PC Wireless Network Adapter?
I'm helping my friend with his HP Pavilion g6-1d28dx Notebook PC, formatted the HARD drive and reinstalled Windows 7 (64-bit). There is, unfortunately, not the CD that came with the laptop for its pilots, we are now able to have a new CD delivered for us, so I used the site to HP support for its Ethernet controller drivers and used a program called Driver Genius 12 for the rest because for some reason, not all the drivers on the support site of work. The only question I have now is that Driver Genius is not correctly install the wireless network adapter and is not the HP support Site. He travels a lot, wireless connectivity is important on this PC. It can connect via its ethernet port, but the wireless adapter cannot see all the networks. Any help would be greatly appreciated.
You are the very welcome.
Here are links to the drivers you need...
PCI\VEN_14E4 & DEV_4727
http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-107849-1&cc=us&DLC=en&LC=en
BCM20702A0 (USB\VID_0A5C & PID_21E3 & REV_0112)
I usually google the hardware ID, and then go to the support page and pilot of the model for pilots.
I think knowing that there is a driver for the wireless card is a year newer than the one in the laptop support and driver page, so I posted a place.
When you have helped so many people that I have, all I have to do now is to see the material ID's for most of the devices, and I know what they are.
For example... I didn't need to look for yours.
I think I spend too much time doing so.
-
I'm trying to deploy Windows 7 x 64 enterprise on a laptop that is not our standard specification and ordered as only once without prior testing.
When I have PXE boot since our deployment server, it loads boot.sdi and the trunk. WIM successfully, but I get so a mistake a network device was not a driver loaded for WinPE could not connect to the deployment server.Try to resolve what I have:> Download the appropriate Windows 8 LAN driver from the manufacturer's website> Imported it out-of-box drivers in MDT> Checked in the properties of the driver that the seller and the device listed in the error ID appear in the list of supported devices> Updated the deployment share> Imported the updated boot image to WDSThis could not solve the problem, so I tried importing the driver directly in WDS and adding to the image manually boot. It has also failed to solve. After I installed Windows 7 manually on a disc, I have successfully installed the same driver to activate the LAN, although it is listed as a Windows 8 / 8.1 driver by the manufacturer. For me, this means that the driver is valid but I somehow do not import into the Lite Touch boot image. What can I do to make the driver to load properly?You will have to go on Support of Windows 7 forums on the following link to help solve your problem: http://social.technet.microsoft.com/Forums/en/category/w7itpro/
Maybe you are looking for
-
How do I install the driver ethernet HP 400-040hk window 7 64 bit
How to install HP 400-040hk window 7 64 bit ethernet driver? Thank you
-
How can I save the audio settings for a USB device on all USB ports?
I have a USB minimic and need to trigger the MCO. However, if the device is disconnected and reconnected, or plugged into different USB, settings are reset. Is it possible to configure the settings of the USB device on all USB ports?
-
Key of registry Deleted personal guard 2009
I accidentally deleted a registry key while tyring to remove personal 2009 guard who managed to put on my computer. Now, I have pop ups like crazy, but my biggest problem is I can't get my Microsoft Security Essentials updates. How can I fix? It make
-
Hi I want to know if possible to change my fan laptop I own a HP Pavilion dv6780 and my s fan is really noisy. Can I change this?
-
Error HTTP 403.6 - Forbidden: IP address, trying to access the employment Portal
I get an error, HTTP 403.6 error when I try to go to monster.com to post jobs online. It is a laptop from home with no connection to work. It says that I need to see the network administrator and I have no one. What can I do to remove the IP address