Problems with external .dll

Similar Questions

• Are there any known problems with external battery for iPhone 6 s karim?

  Are there any known problems with external battery for iPhone 6 s karim? Jackery of input: 5V / 2. 1a.

  I had heard that some may damage internal parts of the phone.

  I am interested in what Apple says rather than what says karim.

  Thank you.

  Jkim99 wrote:

  Are there any known problems with external battery for iPhone 6 s karim? Jackery of input: 5V / 2. 1a.

  I had heard that some may damage internal parts of the phone.

  I am interested what said Apple rather than what it says karim.

  Thank you.

  There is no Apple here in this technical forum from user to user.

• I have registry problems. My games drive no longer works: he continues to show that there is a problem with fmod.dll

  I have registry problems. My games drive no longer works: he continues to show that there is a problem with fmod.dll, then when I fixed an error occurred -FSOUND-Sample_Load@16.  Also, ITunes says that there is a registry problem. We have inadvertantly deleted something or can other software recently installed it cause it was working fine until we installed a vivtar camera.

  Can provide you advice on how I can overcome this problem.

  Concerning

  original title: update windows

  Hello

  Method 1:

  I suggest you uninstall all third-party software and then try to perform the system restore.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  Method 2:

  I also suggest to perform a system analysis File Checker.

  File system (CFS) Checker

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  Post back with the results for further directions.

• My Windows XP has problems with shlwapi.dll

  My Windows XP has problems with shlwapi.dll and there are plenty of sites to download, but they all want money, why don't misrosoft not has an answer for this problem. When I try to update to internet explorer 6 to explore 8 then the error always pops up saying: you have a problem with shlawpi.dll and he can not continue... Very very frustrating.

  In general, it is not a good idea to download dll files.   See, for example, http://pcsupport.about.com/od/findtheproblem/qt/dll-download.htm

  If you explain more in detail what your problem is, including providing the full text of the error without paraphrase, it is likely that someone in the appropriate Microsoft Answers forum will be able to help.

  Because it seems that your problem is related to Internet Explorer, you are more likely to receive help if you post in the forum Internet Explorer, where there are already many threads dealing with issues of shlwapi.dll on IE: http://answers.microsoft.com/en-us/Search/Search?SearchTerm=shlwapi&CurrentScope.ForumName=ie&CurrentScope.Filter=&askingquestion=false

  If you look through some of these threads, you can find the answer to your question without further delay.  If not (or if you just want to watch), do not forget to include not only the text of the error message, but also the version of Windows XP, you have (Home, Pro, Media Center) and its service pack (start > run > winver > OK).

  And, based on this thread - with what seems to be your exact problem - also include responses to the following questions (there no answer, certainly because the OP has NOT provided to the request for information):

  1. what application or anti-virus security suite is installed and is your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  2. do you have a free trial Norton, or a test of free McAfee [a] come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  3 is installed WinXP SP3?

• Problem with external hard drive (an unexpected error - 50)

  I've had this problem for a few months now. Sometimes, I can't delete a file from my external hard drive, or export a file to it. The process is impossible, and I get a message "Cannot perform the action due to an unexpected error - 50". Ejecting the disc gives the message "eject impossible because another program can use it." Ejection force becomes the only option. After re-login, the problem goes away, like nothing ever happened.

  The question is not constant, but quite common to become a nuisance, the one I want stopped.

  That's what I think it is (a bad connection with the cable, defective contact), or is this a virus? I need to know.

  The hard drive is 1 TB Toshiba Canvio Basics and is formatted as Mac OS extended (Journalized).

  not a virus, and not only because there is no virus mac at this time.

  negative errors on the discs can be a signal indicating that the file is corrupted or worse still, the drive is failing. While it can also be a problem with the cable or the connector that it commonly goes back on the disc itself.

  Currently, it is recommended that you backup your data if a backup fails, you may need to save what you can manually and sometimes that means go to this folder by folder or file by file

  Use Time Machine to back up or restore your Mac - Apple Support

  All HARD drives (and SSD') eventually fail and while this isn't a your statement you should check the drive with disk utility (Macintosh HD/Applications/Utilities/Disk Utility) after you got what you possibly can off and consider replacing the disk with a new one.

• Ver El Capitan 10.11.6 - problems with external display

  I've updated my Macbook Air to the latest version of El Capitan (ver.10.11.6), and since then, I had problems with my external monitor: image is thus largest, out of proportion, and I can't seem to be able to set the zoom out or by using the display options. That's all just terrible to work with her. It is not my monitor because I never change its configurations, and there is nobody else who has access, and the problem started after I updated to version 10.11.6

  Any help will be appreciated!

  How do you connect the monitor?

  Mirroring your screen or to help us address display?

  What is the native resolution of your screen?

• Problem with external HARD disk - cannot mount the mac partition and can't unmount the partition windows

  Hi all

  Need your help. I have problems with my external hard drive. I worked on it yesterday when the cable is a little detached and disassembled my intestinal HARD drive.

  Here are the specs:

  1 Macbook Air 11.5 "running on El Capitan (10.11.1)

  2 Buffalo Ministation external (1 TB) HARD disk divided into two: a Mac partition (for time machine) and the other a windows on FAT32 partition.

  Before the accident yesterday, it was working OK.

  Now, when I connect the HARD drive, it turns on but the Mac partition cannot be mounted (it does not appear on the Finder. I opened disk utility... just load forever and does not work) and the Windows partition is visible... but I can't take it apart without turning my computer.

  I can assemble and disassemble a USB stick very well.

  Any help would be appreciated.

  Thank you!

  Maybe you can explain a little better.

  I would like to make some general comments before having your replay.

  It is not wise to use TM on a disk with apple unformatted or partitions, it is preferable to have a dedicated TM drive also.

  For TM, the rule is that the drive is about 3 times the size of the boot disk.

  Normally you 'survive' a good step disassemble the drive external, but in this case with a another partition formatted on this subject, I'm not sure if that do not corrupt the disk, especially since the Windows partition is bootable. I have suspct the partition GUID on the TM partition table is corrupt.

  I propose to start the disk completely: in DiskUtility select the 'higher' level (name of manufacturer) and the Partition, one OS X Extended (journaled) partition table Partition GUID. And use it only for TM, is not too big for this.

  Have another drive formatted NTFS for Windows.

• Problems with external monitor and the Satellite U200 - 10 d

  I have a Satellite U200 - 10 d running Vista Business Edition. When I attach an external display screen flickers (horizontal lines on the screen)... It's worse when you move the mouse on the screen. The monitor on the laptop is fine I just have problems with the external display.

  The screen that I is a model VG1930WM viewsonic (widescreen) here is the specs of res for this screen...

  PC VGA up to 1440 x 900 non-interlaced
  Analog analog/digital RGB (75 Ohm, 0.7 Vc - c) / DVI - D

  Anyone have any ideas? I checked the graphics driver for vista and this is the latest version...

  HM, it's a nice solution, I have a friend with a similar problem.

  We will try your suggestion, snipe and perhaps give feedback if it worked for us.

  Welcome them

• Problem with external monitor when used with the Satellite P100-434

  I'm trying to use a Vizitron L - 151 monitor flat screen connected to the VGA port on the back of my Satellite P100 - 434 (PSPADE)

  I find that the screens seem to periodically - feeding cycle windows resize themselves and then the screens settle down again. This happens with the laptop and the external monitor.

  I've updated the latest available BIOS V4.20 (November 2, 2007) I use 7.15.11.6369 NVIDIA GeForce Go 7600 driver version. I'm under the edition of Vista Home Premium to standard build.

  I even resorted to the use of the dvd system recovery to rebuild completely the laptop and the problem persists. In Device Manager I have generic Non - PnP monitor and below that I have a generic PnP monitor I tried and it is not possible to get specific drivers for the monitor Vizitron L-151. * NOTE * I saw dxdiag that the external display is identified the Non - PnP device

  The display configuration that I'm trying to use is to have my laptop as the main screen with the external display on my left as an extension to the desktop. In display config my computer screen appears as number 2 with the additional display in the poster as a device 1

  While typing this my screens have made this three times and the last time, this IE7 window installs itself to the external display in restored down to size.

  If anyone has a glimpse of it, I would be very grateful. There are no problems when the external display is deleted.

  _I can reproduce this problem on demand_ by uninstalling the monitor Non - PnP Device Manager.

  Sorry, mate, but you ad confuses me a little and be hones I m not 100% sure what you take on
  You have some problems with the resolution of the external display or what?

  I've found another thread on the setting of the external screen as main screen:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=96263#96263

  According to this statement:
  > In display config my computer screen appears as number 2 with the additional display in the poster as a device 1
  It seems that the external monitor has been on the main screen and display books internal as external.

  I recommend you change this settings and to use books appear as 1 and the external display form 2.

• Cannot open Quickbooks and also problems with Sophos & DLL

  Original title: Sophos & DLL

  I have the same problem as others with Sophos & DLL, but how to solve the problem that my Quickbooks does not open.

  Hello

  (1) what exactly is the problem that you are facing with Sophos & DLL?
  (2) what version of the Windows operating system is installed on the computer?
  (3) have you made recent changes to the computer before the show?
  (4) you get an error message?

  I suggest you to contact QuickBooks support for assistance.
  http://support.QuickBooks.Intuit.com/support/default.aspx
  

• X230T USB 3 port sleep problem with external Blu - Ray drive

  Hi all

  I bought a new LG external blu - ray drive and I have problems with it sleeps very quickly.  It is recognized in Windows 7 and will be available for a short period of time after I turn it on, but if I don't use it for 30 seconds, it's in a kind of fashion 'sleep'.  It works perfectly on the single WE port 2.0 on the X230T so there must be something with the 3.0 port.  The drive is powered by an AC adapter and USB 3.0 cable included one.

  I tried to disable all the properties sleeping USB in all areas of power management and power options in Windows.  Also enabled and disabled USB hub root energy saving.  Also, I went through the BIOS and threw the USB options as well and can't find why it is go to sleep so quickly.  I have the latest firmware on the drive, as well as the latest drivers Lenovo USB 3.0 for the X230T.

  I guess I'm out of luck at this point because I think I've tried all possible solutions?

  Thank you.

  Hi again,

  I have looked on the specs and do not see why this problem should occur. I would make sure that the BIOS is updated, if you have not already. The latest BIOS for your machine is 2.03 and came out a month ago. This update, you can find here. And if this does not work, can you check and publish what are the settings in your BIOS Config > USB Configuration?

  Best,

  Adam

• How can I process the message saying that there is a problem with certCredProvider.dll?

  Whenever I turn on the computer, I get a window saying that there is a problem with C:\Windows\system32\certCredProvider.dll. What can I do?

  Hi JKittleson,

  1. What is the exact error message?

  2 did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1:

  Step 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 provided in the above article.

  Method 2: Try the SFC (System File Checker) scan on the computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Let us know the results.

• Problems with external javascript file

  For some reason, I can't get a text external/javascript [.js] file works correctly on my Web page. I went to Adobe Help Viewer and follow the instructions clearly. But it all comes to a cause I can't seem to see a little icon in fashion design javascript to connect my widget external javascript to support javascript on my page. Why is this? I have the visual aid invisible items checked as well. Here is an article of the code below.

  Rufus65 wrote:
  > I'm sorry, I went from one problem to another, the first problem with the
  > javascript shield was my main problem and the first and its fixed. now, it's a new
  > problem, but I think I can just cut this time around, I got the codes mutilated
  > of this site: http://www.widgetbox.com/#. it allows you to customize your own
  > widgets and I thought that it was legitimate, apparently is not. to solve my javascript
  > problem, basically I want to just a website that has downloadable widgets for me
  > to insert into my website using dreamweaver CS3. That is my main task, I was
  > trying to accomplish. I started 5 steps before this goal which was not brilliant
  > at all. So my main problem [outside my other topic post on my screwed upward
  [> header] is just to get legitimate widgets that are free and easy to use in
  > dreamweaver CS3, cause I don't have time to learn Javascript code or whatever it is
  > close to him.

  Depends on which widgets you want and what you need to make them specifically for you. Maybe start a new thread, listing widgets that you feel you need and what you want to do with them.

  You do not have available in the Insert bar Spry widgets, but they can or may not be able to accomplish some of the things you like to do, be specific about what you want to do on your end, and what you want the end result to be. Send examples if you have.

  Many widgets will require some, if not encoding extended, to get the best out of them. For example, widgets to http://ui.jquery.com/ can do something relatively well, but in Dreamweaver CS3, you need to enter the code to be able to set a lot of options.

  Where it's important, DWCS4 added a "web widgets" option that allows you to install widgets from the Exchange:
  http://www.Adobe.com/cfusion/exchange/index.cfm?s=5&from=1&o=desc&cat=290&l=-1&event=Produ ctHome & exc = 3

  But even once, they may need a little digging intot he code to get the best of them.

  HTH

  --
  Danilo Micen
  | http://blog.Extensioneering.com/
  | Extensioneer WebAssist
  | Adobe Community Expert

• Problems with external authentication!

  Hi all!

  I tried to experiment with external authentication with PHP using the examples provided with the LCCS SDK Navigator.

  I changed the page "index.php" to include all my account info. and checked twice!  However, when I download on my server, I get the following error every time I click on the button send the form:

  Warning: fopen() [function.fopen]: URL file-access is disabled in the server configuration in /home/tueslcom/public_html/LoginTest2/lccs.php on line 690

  Warning : fopen (https://collaboration.adobelivecycle.com/myusername? mode = xml & accountonly = true &) [function.fopen]: failed to open stream: no suitable wrapper could be found in/home/tueslcom/public_html/LoginTest2/lccs.php on line 690

  Fatal error : Eception exception 'RTCError' with the message "connection failed" in /home/tueslcom/public_html/LoginTest2/lccs.php:695 trace stack: #0 home/tueslcom/public_html/LoginTest2/lccs.php(587): RTC::http_get('https://collabo...', Array) #1 home/tueslcom/public_html/LoginTest2/lccs.php(254): RTCAccount-> do_initialize() #2 home/tueslcom/public_html/LoginTest2/index.php(33): RTCAccount-> __construct ('https://collabo...') #3 {main} thrown in /home/tueslcom/public_html/LoginTest2/lccs.php on line 695

  I have some experience with PHP, however, through lccs.php and trying to reverse engineer everything to know what is happening is a bit beyond my skill level!  Any idea what could be past/missing here?  It seems that this should be a no-brainer!

  Thanks in advance for any help that anyone can give.

  Matt

  No, it's really that on a certain system curl works and waterways only and on some curl does not work.

  I chose the 'flow' as a default way because that's what worked on my machine

  There is really no difference in how the two methods work, they are all two the same way https requests and curl is one of the best clients available http anyway.

  -Raffaele

• Satellite M30X: Problems with external USB 2.0 HARD drive

  Hello
  I have a Toshiba Satellite M30X. I bought recently a 200 GB external hard drive. It has its own power supply. If I connect with USB 2.0 on my laptop, it happens to disconnect and reconnect leads him. Sometimes it works, so I can put data on the disc. Then again, he diconnects and reconnects repeatedly. I've tried a different USB Port, but there is no difference. It's very strange, because I plugged the external hard drive to many other computers (Laptop and Tower) and it STILL works! It is that with my cell phone, it disconnects and reconnects all the time. As I said, not always. Sometimes it works for a half an hour or two and then the action begins again...

  If anyone can help?
  Oxford Lutz

  Hello

  I put t know if this can help, but you can try to connect a USB hub with an external power supply. Then try to connect this external HARD disk to the USB hub.
  I know that it of not a exactly the solution but maybe it will help you to solve this problem of USB.

  Good bye