Problems with external monitor and the Satellite U200 - 10 d

I have a Satellite U200 - 10 d running Vista Business Edition. When I attach an external display screen flickers (horizontal lines on the screen)... It's worse when you move the mouse on the screen. The monitor on the laptop is fine I just have problems with the external display.

The screen that I is a model VG1930WM viewsonic (widescreen) here is the specs of res for this screen...

PC VGA up to 1440 x 900 non-interlaced
Analog analog/digital RGB (75 Ohm, 0.7 Vc - c) / DVI - D

Anyone have any ideas? I checked the graphics driver for vista and this is the latest version...

HM, it's a nice solution, I have a friend with a similar problem.

We will try your suggestion, snipe and perhaps give feedback if it worked for us.

Welcome them

Tags: Toshiba

Similar Questions

  • Anyone having problems with Windows 7 and the HP LaserJet P2035n?

    It seems, after a few months of service, there are several problems with this printer and Windows 7 only.  We have several offices that use this printer and almost each one has similar problems.  It will printer randomly disappear, not being able to print anything at random times of the day, to the spooler crashing every two minutes or more.  There is no problem at all with Windows XP or Vista, only 7.  Reinsalling the printer driver takes care of the problem for a few days, but the questions up all over again.

    Hello

    The Microsoft Answers community focuses on issues and problems related to the consumer environment. Please join the Technet forums below:

    TechNet forums

  • Problem with external monitor when used with the Satellite P100-434

    I'm trying to use a Vizitron L - 151 monitor flat screen connected to the VGA port on the back of my Satellite P100 - 434 (PSPADE)

    I find that the screens seem to periodically - feeding cycle windows resize themselves and then the screens settle down again. This happens with the laptop and the external monitor.

    I've updated the latest available BIOS V4.20 (November 2, 2007) I use 7.15.11.6369 NVIDIA GeForce Go 7600 driver version. I'm under the edition of Vista Home Premium to standard build.

    I even resorted to the use of the dvd system recovery to rebuild completely the laptop and the problem persists. In Device Manager I have generic Non - PnP monitor and below that I have a generic PnP monitor I tried and it is not possible to get specific drivers for the monitor Vizitron L-151. * NOTE * I saw dxdiag that the external display is identified the Non - PnP device

    The display configuration that I'm trying to use is to have my laptop as the main screen with the external display on my left as an extension to the desktop. In display config my computer screen appears as number 2 with the additional display in the poster as a device 1

    While typing this my screens have made this three times and the last time, this IE7 window installs itself to the external display in restored down to size.

    If anyone has a glimpse of it, I would be very grateful. There are no problems when the external display is deleted.

    _I can reproduce this problem on demand_ by uninstalling the monitor Non - PnP Device Manager.

    Sorry, mate, but you ad confuses me a little and be hones I m not 100% sure what you take on
    You have some problems with the resolution of the external display or what?

    I've found another thread on the setting of the external screen as main screen:
    http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=96263#96263

    According to this statement:
    > In display config my computer screen appears as number 2 with the additional display in the poster as a device 1
    It seems that the external monitor has been on the main screen and display books internal as external.

    I recommend you change this settings and to use books appear as 1 and the external display form 2.

  • Satellite L30-149, only works with external monitor and VGA mode

    Satellite L30-149, Windows XP Home Edition

    Yesterday I did face the following problem:

    I swithched on my laptop but I have nothing on the screen. I tried to reboot several times, but it did not help. If I look very carefully, I see the logo of Intel (black text on white on the screen) but nothing else. The logo shows very low.

    I plugged on the external monitor. With that he gives a little more. The Intel logo with the instruction how to reach configuration etc. Then Windows logo but when it should ask the user, the external monitor going to sleep mode and nothing happens after that.

    And an external monitor, I managed to connect to Windows in safe mode and also in VGA mode. In VGA mode, I tried to change the resolution, after that I got black screen again and I had to start.

    Now I wonder if I could do something (update of drivers, etc.) or should I go to the store where I bought the laptop and ask them to fix it. This look like a problem covered by the warranty?

    --
    Upgrade to this message (what happened after that I wrote the above text).

    I turned on the laptop again. I thing the lightning from the room is now better because I noticed that the laptop seems to work (almost) correctly. Windows starts normally, I can faintly see the desktop. This seems to be a problem in the background ligthning. FnF7 does not change the situation.

    Post edited by: mpetas

    > If I look very carefully, I see the logo of Intel (black text on white on the screen) but nothing else. The logo shows very low.

    This sentence is very interesting.
    Sounds like a question of FL-ups!

    It is a small part behind the screen and control the backlight of the screens.
    Usually, this part is not very expensive and the replacement is not complicated to a technician for laptop.

    If your warranty is valid, then everything should be done for free.
    Try to contact the ASP in your country and ask for later handling.

    Greetings and good luck

  • Shaking image on the external monitor when the Satellite A200 is running on AC

    Hello

    I have this problem that drives me crazy... I bought an external monitor for my laptop Toshiba Satellite A200-1 9 s, but the problem is that the image on the external monitor, shakes. I tried another monitor, the same, another cable, same problem; the only way to stop it is to unplug the AC of the laptop.

    I also tried to move the monitor further away from the laptop, but nothing.
    I can stop shaking so hard that if I switch to the profile AC from FULL POWER to save power... but even with this image is still shaking a little.

    So basically there is a magnetic field around here, probably in the portable, which makes my picture shaking like crazy... someone knows how to stop it?
    TX

    Hello

    Hmmm...
    I don't think it has to do something with magnetic fields.

    Cause she is related to the energy consumption of the computer, it seems that there is a problem with the AC adapter.
    If he needs to deliver all the 'juice', this is capacitors to keep absolutely stable voltage may be too low.
    These instabilities (with the frequency of 50 Hz supply) can parasitize the signal on the screen.

    A solution for this?... If you know how to solder some fat capacitors somehow between the two...

    Or:
    It is a grounding problem
    I have never heard of such problems with the LCD (VGA monitors?) monitors. Generally, this is the case when you use an analog video output,
    leading to no color on TV.
    You have an annoying hum when you connect the audio output to an amplifier? It would be a sign for it.
    I had such a problem and solved by plugging my laptop on the sector on another circuit in the House as my audio devices
    So experiment with it.
    First: unplug all the other stuff (printer, Poles, antennas, all) these are unpleasant problems with a lot of possible interference.

    Let me know!

    Welcomes Matz

  • Problem with Polish letters on the Satellite L50-B-177

    Helllo,

    3 days ago, I bought Toshiba Satellite L50-b-177 and I installed all the updates proposed, including the new version of the BIOS 1.70.

    Right now I have problems with some of the letter Polish such as?,?,?.

    In some Polish letters programs do not work at all, and in others only some of them.
    I changed the language (Polish), type of keybord (Polish programmer), region (Poland) and many other options in poles and Poland. Does not always work.

    Can you help me? Should I switch my laptop?
    I contacted with the center of Polish service COMP, but they sent me to this forum.

    OLA

    Please check this thread
    http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?threadID=78858

    I recommend you to check the external USB keyboard functionality.
    If external keyboard works properly, the problem could be linked to a malfunctioning internal keyboard.

    In addition its recommended recovery the laptop to factory settings and check the functionality of the laptop as part of the default factory setting.

    _UPDATE: _

    This seems to be realted BIOS bug and I guess you have to wait until the new BIOS will be published which could solve the problem

  • Problems with MSN messenger on the Satellite A200-175

    Hello world

    I have a Toshiba Satellite A200-175 with Vista home premium OEM Act.
    I have this laptop for a year and a half. Right from the beginning I had many problems with MSN messenger. Whenever I'll have conversations, or MSN messenger is just on, it gets bogged down.

    I tried everything to fix the problem:
    -removed MSN and downloaded again
    -tried other versions of MSN
    -tried MSN with and without messenger plus!
    -removed Norton anti virus (a human from a computer store told me that might be the problem)
    -installed new my computer everything
    -Make a new email address (this time it @live instead of @hotmail)
    -stop the Starter sets

    But nothing helps!

    I'm desperate...
    Please, can someone help me?

    Good bye

    I see many things possible were tired and I have o say I would try the same thing, but I lack one important thing;

    Have you installed updates for Vista together? I mean there are a lot of new MS patches and fixes available and new in SP1 came out too.

    So I think you should keep the OS always up-to-date to ensure a good working order

  • T520 problems with external monitor resolution

    Hello

    I'm standing right now waiting on hold for a Lenovo tech support rep, so I thought I'd just post my problem here. I just bought a Dell ultrasharp monitor U2713HM and am trying to connect it to my Lenovo T520. We sometimes see the monitor and sometimes it isn't, but this isn't my main problem. The monitor is supposed to be 2560 x 1440, but all the resolution settings are grayed out. I know that the Lenovo can support it because my last screen is a Samsung SyncMaster supporting 2560 x 1440, and it was beautiful (beautiful until the monitor exploded).

    I was on the phone with Dell and Lenovo, and so far nobody has been able to solve the problem. I've updated the graphics driver NVIDIA (NVS4200M) to the latest version (310.90) as suggested by Dell, and I changed the cable VGA to DVI - D cable (connected to the Dual Link adapter), as suggested by Lenovo. He stlil does not work.

    I could use some suggestions. I'm not grumpy at all, so it's quite frustrating. Thank you!!


  • Problem with Windows Explorer and the recorded files

    When I save files from the internet and then open the folder with Windows Explorer in the backed up files, I find that WE consider not save them on my hard drive "change" more. I know it's strange, but I tend to retain files roughly in the order that I saved them, rather than by the name of the file or anything else. So now to manually change the files in a certain way, then save them to get them organized as I want. Of course, this can become very painful and long if I have a lot of files to organize this way. My question is: How can I get Windows to consider saving a file on my HDD as change? I use Firefox and updated recently, which may be the cause of the problem.

    Hi Flingle,

    Were you able to save and access files correctly before you update Firefox?

    You can create a new folder & try to download the file inside of Internet Explorer & check if the problem persists.

    Hope the helps of information. Please post back and we do know.

    Concerning
    Joel S
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I was wondering if there were other problems with Adobe CC and the last IOS El captain?

    I've recently updated to IOS Yosemite to El Capitan, when I went to launch Premiere Pro for the first time, there were a few very visible differences of how things went, if not, the program has worked very well.

    Thinking that this might just be a problem after installing just El Capitan, I thought that a reboot would clear things up. When I went to restart, I could not go beyond the initial start-up of the grey Apple screen, I ended up having to wipe the drive and reinstall El Capitan, nd, then migrate my data from my backup of TM, what a shot, it took hours to complete.

    Anyone else having similar problems? Anyone know when Adobe get out their CC to CE upgrade?

    I don't know about Apple (I'm on Windows), but I read that Microsoft has a way to restore the previous operating system if an upgrade to Win10 does not work

    I don't want to know about it, because my Win8.1 works with all my current software... I have read Win10 problems with the software that I have now, so I will NOT go to Win10

    If Apple does not offer a way back to the BONE you had before, I think you're stuck with problems until 'the 3rd party vendors' make changes to work with El Capitan

    And, if you do a "time machine" backup before the upgrade, be aware that TM backups do NOT work with Adobe because of... hidden folders software then you would need to uninstall and reinstall

    And just so you know, Microsoft has also problems with Mac 10.11 El Capitan

    -http://www.macrumors.com/2015/10/05/microsoft-office-2016-el-capitan-bugs/

  • Problems with configuration properties and the java plugin

    Hello

    I have test the java plugin from the hyperic documents. Autodiscover works very well. Now, I had the problem if I want to change all "configuration properties" I get following error message:
    ' The configuration has not been set for this resource due to: invalid configuration: error reported by Agent @ 141.73.130.146:2144: java.lang.NullPointerException.
    Wait I use properties by default, then I don't get any errors.

    What is the problem?

    MyAutoDiscoveryServerDetector.java
    ---------------------------------------------------------------------------------------------------------------------------
    SerializableAttribute public class MyAutoDiscoveryServerDetector extends ServerDetector implements

    {AutoServerDetector}

    public list getServerResources (ConfigResponse platformConfig)

    get {PluginException}

    Server list = new ArrayList();

    Server ServerResource = createServerResource ("My Auto-Discovery Server->" + (x + 1));

    ConfigResponse productConfig = new ConfigResponse();

    productConfig.setValue ("myTimeout", String.valueOf ((x+1) * 1000));
    productConfig.setValue ("myUrl", "http://127.0.0." + (x + 1));
    productConfig.setValue ('Description', 'Description - my Auto Discovery Description->' + (x + 1));
    productConfig.setValue ("myValue", 10);

    server.setProductConfig (productConfig);

    Servers.Add (Server);

    return of the servers;

    }
    ---------------------------------------------------------------------------------------------------------------------------

    HQ - plugin.xml
    ---------------------------------------------------------------------------------------------------------------------------
    <? XML version = "1.0"? >
    < package = "com.citytechinc.articles.hyperic.plugin plugin" >

    < name of the filter = "domain" value = "My Auto Discovery" / >

    < name of the server = "MyAutoDiscoverServer" version = "0.1 c" platforms = "Unix, Win32" >

    < plugin type = "autoinventory" class = "MyAutoDiscoveryServerDetector" / >
    < plugin type = 'measure' class = "MyAutoDiscoveryServerMeasurementPlugin" / >

    < config >

    < name of option = 'myUrl '.

    Description = "Enter the URL for this resource"

    " default = ' http://127.0.0.1 "/>

    < name of option = "Description".

    Description = "enter a description of this plugin"

    default = "default my Auto Discovery Description" / >

    < name of option = "myTimeout."

    Description = "time-out for something in my plug-in.

    default = "0" / >

    < name of option = "myValue"

    Description = "a metric value.

    default = "10" / >


    < / config >


    < name metric = "availability".
    alias = 'availability '.
    Template = "System.avail:type = Platform:Availability"
    category = "AVAILABILITY".
    indicator = 'true '.
    collectionType = "dynamic".
    units = "percentage" / >

    < name metric = 'value '.
    alias = 'value '.
    model = "" MyPlugin:Type = value: value ' "
    category = 'USE '.
    indicator = 'true '.
    collectionType = "dynamic".
    units = "none" / >

    < / Server >

    < / plugin >
    ---------------------------------------------------------------------------------------------------------------------------

    UM,.

    This must be due to an incompatibility between the definitions of plugin in the server (and/or of the database) and the agent.

    First of all, always check the server log, errors that appear it should lead to the cause.

    The plugin xml initialized ok on the server, or any error appear?

    You go to Administration-> default trace and see your plugin (Server Type: MyAutoDiscoverServer) and everything is there?
    If this isn't the case, errors occurred when starting the server, check the log.

    Did you start to shave - created the plugin, added to both server and agent, autodiscovery, the platform/server added in Hyperic - or you already had the server/platform added in Hyperic and who has made some changes in the xml plugin that may be in conflict with what is already in the Hyperic database?

    Generally the pitfalls that come from these errors.

    Been there, done that.

  • Problem with my account and the Group of

    Hey there,

    I have some difficulties to group by my result, and I ask for assistance in this forum.

    My table is really simple, have an Ilie and a COM domain that contain the string with line breaks. I want to count the number of group ResId by COM.

    My data in my table store have look like this:

    RESOURCE TABLE:
    ResId. COM
    1. Server: Walcot15.\nCOD M50
    2. Server: Walcot15.\nCOD M55
    3. Server: Walcot16.\nCOD M55

    I would like to get as a result:

    Count (RESID) | COM
    2. Server: Walcot15.
    1. Server: Walcot16.

    First of all, I did substr in order to keep only the string that contains the server and not the \nCOD...


    SELECT
    County (RES. (' ' ID ') as "ResId".
    substr (RES. CMT, 0, instr (RES. CMT, Chr (10))) as 'COM '.

    Of

    RES THE RESOURCE

    WHERE

    REGEXP_LIKE (RES. ("' CMT ', 'Server', 'i')

    Group (RES. "" THE ID ", RES. CMT)
    order by
    1

    The problem is not count and group by server. Anyone help me, please?

    Kind regards
    Jarod.

    Hello

    When you assign a column alias (for example, COM) in a query, you can't reference this alias in the same query (except in the ORDER BY clause). It is necessary to repeat the expression or affect the aliases in a subquery. Then, you can use the alias in any part of the request of the mother.
    For example:

    WITH     got_com          AS
    (
         SELECT     id
         ,     SUBSTR ( cmt
                     , 1
                     , INSTR (cmt, '\') - 1
                     )     AS com          -- Alias defined
         FROM     resources
         WHERE     INSTR ( UPPER (cmt)
                    , 'SERVER'
                    )     > 0
    )
    SELECT       COUNT (id)     AS count_resid
    ,       com                         -- Alias referenced
    FROM       got_com
    GROUP BY  com                         -- Alias referenced
    ORDER BY  com                         -- Alias referenced
    ;
    

    Output:

    COUNT_RESID COM
    ----------- ------------------------------
              2 Server : Walcot15.
              1 Server : Walcot16.
    

    If the idea is to have a production line for evry value distinct from com, the GROUP BY clause should not contain anything except com

    You will notice that I used SUBSTR and INSTR, above, in the places where you can also use regular expressions. This is because regular expressions tend to be much slower. If the speed is not a problem, and you prefer to use REGEXP_SUBSTR or REGEXP_LIKE, then it is fine to use.

  • Problem with PSE - 2 and the new 1.5 TB drive

    Hi all. First of all, I use my PSE - 2 recorded for several years without problem. AMD Athlon 7750 2.7 Ghz, 2.0 G memory bicoeur. WD 1 .5TB primary and WD 500 GB secondary drive. Win XP SP3. I recently had a disk fails and installed a new freshly formatted WD 1.5 TB as my boot drive. New installation of Windows XP and updates. When I install the elements, it now seems to install fine. The problem comes when I try to run the first time that I get "could not initialize Photoshop Elements because scratch disks are full '. Then elements shut, not allowing no not me nothing to do with configuring internal program. I tried unistalling and installing on the 500 GB drive, but still not the same error. I increased my page file memory does anyone know of a problem with the installation of the elements on a large drive or can anyone offer a possible solution to what I see? Thanks in advance for suggestions...


    JohnR.

    I think Barbara meant photoshop 7, which was a little before pse2.

    If you hold them Alt + right Ctrl keys after starting pse2, a dialog box

    should appear allowing you to choose the drive working (keep holding

    keys until the dialog box is displayed)

    If you have a recovery partition on your hard drive, try this to choose

    the drive working, then exit pse2. Then restart pse2 and

    Preferences > Plug-ins and Scratch Disks choose your hard drive regularly to the scratch disk.

    Newer versions of the EPS, the newer less than 3 or 4 don't seem to have this problem.

    MTSTUNER

  • License with Windows 7 and the Satellite L875 - 11 M problem

    Hello

    I recently (about a month) sent my computer to TOSHIBA because of a hardware problem, so I think they changed the PCB from what I remember. My computer is a Satellite L875 - 11M and I am on Windows 7 Home Premium.

    Since yesterday, I lost my wallpaper on the desktop (do not know if it is normal or not) and got a popup telling me that my copy of windows 7 is not genuine. I tried to turn it on, but it has not been accepted as valid. I searched a bit on the Internet and found that the license key is linked with the BIOS of the motherboard, which may have been changed a month ago, so it seems to be the source of the problem.

    How can I solve it? Asking Microsoft for a new key to license, or Toshiba, or is there a simple procedure? I already tried the 'slmgr /rilc"and"slmgr /rearm"orders with no result.

    Recorded on label product key Microsoft belongs to the original version of recovery that you got with your laptop, so it cannot be used for activation.

    I can't explain why pre-installed version has expired, but you need to do now is install Win7 with original Toshiba recovery disc. After doing this you have will activate and original OS version that belongs to your laptop.

    I just hope that you created recovery disks Toshiba s advice.

  • CHKDSK with Windows Vista on the Satellite U200-115 messages

    I just installed the free update to Vista, which went well, but now that I'm installing software I get error messages saying that some files are corrupt.

    Running CHKDSK happens with large number of errors in the index. Repair attempts were not very successful. Help please!

    BIOS has been updated with the update of the bios provided on the disk supplied with the upgrade to Vista. Is this the last?

    My machine: laptop Toshiba U200-115

    Hello

    If I were you, I form the systemdisk and reinstall vista, because if your file system is damaged and is not able to repair itself the tools system, then you have some big problems.

    I suggest: backup your important data on key USB, USB - HDD, CD/DVD or something else and reinstall your operating system.

    Welcome them

Maybe you are looking for