Problems with Hercules DJ MP3 E2

Original title: HERCULES DJ MP3

My friend of America gave me a controller HERCULES DJ MP3 E2 and I lived in the Philippines.

Currently I have a problem with the TOP button on the LEGALIZATION of MODULE 2, I'm not touching the button on the controller. But his movement on the software. I use VIRTUAL DJ Version 7.

I tried to reinstall the driver from the HERCULES and VDJ. Ran CCLEANER. Restarted my computer.

Always the same.

From now on, I'm running MIDI MONITOR to check on my controller. But then I could not understand the manual because it is in FRENCH

Here are the specs of my computer

Unfortunately I don't have the budget yet to buy a new controller. Because I'm just starting as a DJ.



-When the question is is produced?
-Did you change your computer, after which the question began?

Test the issue in a clean boot state. There could be a third-party software that is causing the problem to occur, this is why I suggest you put your computer in a clean boot state and check if it works normally.

Note: Do not disable the HERCULES DJ MP3 E2 in clean boot and pPut your computer back to normal mode (follow the steps in the article) after the test.

If the problem persists, contact Hercules support the best.

Tags: Windows

Similar Questions

  • A problem with the transfer of songs with the "rocket"

    Greetings people. I'm having a problem with the player MP3 Sansa Fuze to my father, and I'm quite confused. It seems to be one of these common problems of MTP/MSC. Here's the thing, when I originally hooked the MP3 player for him, I know it was in MSC mode, because this is the mode that is similar to a flash drive. I showed him how to transfer the songs on it. Now, we had recently to get the computer basically re-tire, updated, new motherboard, and all. I'm trying to set up for him to put some songs on it.

    However, when the computer is in MSC mode, there no songs, no, nein, notta. However if I turn it on in MTP mode, the songs are there. But I * know * I never transferred everything using WMP because I prefer the simple 'drag and drop' method using Windows Explorer.

    It seems so now I'm stuck with a bunch of songs on the MP3 player of my father who cannot be returned to the computer, and it cannot access unless it is through WMP. Is it possible to fix this?

    Thanks in advance.

    I appreciate the help of everyone. I tried the solution with just type "Sansa Fuze 4 GB" Explorer solutions, but it does not work unfortunately. And Yes, I think that the player was in automatic detection at the origin, so I was probably drag / drop in MTP mode.

    New but good and strange. Even in MTP mode, if I connect it to my laptop I am able to drag and drop anyway. So I'll do a simple copy and passed on my hard drive, format the drive and put it into MSC mode and put everything on.

  • There seems to be a problem with the soft ware.  We use the CS6 for Records services and when we try to save the record, part of the record is stored. The record to be saved as an mp3 file is 70 to 100 KB but recently only 3 KB are generally

    There seems to be a problem with the software.  We use the CS6 for Records services and when we try to save the record, part of the record is stored.  Usually the recording to be saved as an mp3 file is 70 to 100 KB but recently only 3 KB are recorded.  What should I do to fix this?

    You may need to reset your preferences of hearing files stored in C:\Users\"username"\AppData\Roaming\Adobe\Audition\5.0. If you rename this folder in 5.0.bak that hearing won't find it when you open the next time if it will recreate a new settings with the default settings folder. See if hearing then works as expected.

  • Premiere Pro 7.0 - problems with some mp3 files

    Well, I'm back with a new question. Because I need sound effects for my film, I use and I get sound effects as MP3 files. First can manage very well, but from time to time I'll get a file first refuses to play, and instead of it gives me no sound at all. Other files in this site work very well, so I have no idea what could be the problem. Any ideas? You guys saved my movie before, I have no doubt that you can do it again. Thanks for any help.

    MP3 files are often problematic. I always convert everything except the tiny SFX (like yours) to 48 KHz 16-bit PCM/WAV to Audition. The great little free-audio editor, Audacity, it will also. Just drag the file in Audacity (or open) and Save_As. fact!

    Most of the issues seems to be with some of the "tricks" that can be in an MP3 player, such as the art of the album.

    Now I have also some SoundDogs SFX, but have never had a problem with one of the time. However, the conversion is almost instantaneous and worked 100% for me.

    Good luck


    PS - Note that conversion to WAV format do NOT recover the fidelity lost with MP3 compression.

  • Satellite C650 problem with USB ports


    I have a problem with my laptop, with my USB ports.

    A few days ago, I plugged my mp3 to charge its battery. I did when system Windows began and after a few ports seconds has stopped working. They work for one to five minutes after starting my computer, but only after my laptop's turn off for a few hours at night for example.

    They work fine and all of a sudden we hear the sound of a disconnected device and usb ports turns off. I tried many solutions but nothing worked. I removed all the USB ports in Device Manager.

    I checked in the BIOS, but everything seems to be okay. I tried to disable the disconnection of usb ports to save energy, nothing. Tools that have been provided by Toshiba to check hardware see as usb ports work correctly. Only usbdview program sees as unknown device, I tried to uninstall it through this program but still nothing.

    You have an idea, what could happen? Or if there is no possibility to fix without service visit?
    I would appreciate your help.


    Have you tested these ports USB plug a USB mouse or a USB keyboard?
    These devices work properly?

    I don t think you need a visit to the service.
    I think that it s just a software problem
    Given that the USB ports are controlled by the chipset, I would recommend reinstalling/updating the chipset driver

    The alternative is a bit drastic, I think about the recovery of the laptop...
    It might be possible that the registry has been confused upward or some 3rd party software preinstalled on the laptop could affect the USB ports.

    I remember that my USB ports do not work after installing iTunes.
    I had to reinstall the operating system once more to get the USB port work even more funny is that I installed iTunes once more and USB worked correctly

  • Compatibility problem with Vista and iTunes

    I downloaded iTunes 9 on my Tobisha laptop Satellite last night and put about 2.5 GB of music on it. I didn't upload the music from the internet. I used MP3s, I had for a few years.

    When I went to boot up the laptop this morning the loading process took some time, but it never loaded to the login screen. I just see the bottom of MicroSoft. Is there a compatibility problem with Vista and iTunes? Maybe I put too much music on my laptop?

    Boot in safe mode and delete iTunes and all the music I downloaded would solve the problem? Or it is less simple than that?

    Don't know where to direct this question if any help you could provide would be greatly appreciated.

    Thank you.


    iTunes is compatible with Vista and there should not be any problem.
    Yesterday, I installed iTunes 9 on my U400 and everything happened correctly.
    If your laptop can not boot Vista correctly, then you should try the repair feature.

    Turn on the computer and press F8. Now you will see the advanced boot menu.
    Now, you have many choices.

    As a first step, you should try the option called: last good known Configuration (Advanced)

    If this will not help and the Vista will not start then try the option called repair your computer. This option displays a list of system recovery tools, you can use to repair startup problems, run diagnostics, or restore your system.

    If that does not help, then you will need to retrieve the unit using the Toshiba recovery disc or HARD drive recovery.

  • Satellite L670-1HD - problem with audio interfaces USB 1.1


    I have a Toshiba L670-1HD with an Intel HM55 chipset, and an Intel Core i5 460M processor. I use this machine for my music software and that's why I use different audio interfaces external and USB-MIDI-Controller with build in audio interface like Mixvibes U - Mix Control Pro ( These built-in audio interface are connected via USB 1.1. Always when I use this audio interfaces interfaces crash audio internalt - the sound is cracked very hard and there are noises in. The controller of all crashes sometimes too.
    When I use another interface audio as an audio interface Hercules DJ Trim 4 & 6 (, which is a USB 2.0, everything works fine. No crashes, no cracks and no noise.
    You could say now that there is no problem and I should stick to the Hercules interface if it does no problem. The problem is that the Hercules is an audio interface only, there is no controller in it with which I can control my music software.

    I've updated all the drivers from the support page of this site without success. Is there a solution available or the Toshiba knows this subject? Am I the only one having this problem?

    Would be nice if a Toshiba official support employer could respond to this message. But this does not mean that I don't want to read somethng submitted by the user for which an index - all Board/Council/recommendation is welcome.

    Thanks in advance for the help!

    See you soon,.


    Hello Stefan

    In my view, you see the problem from the wrong point of view.
    Toshiba and each laptop manufacturer offer product and hardware and software support. So if there is a general problem with the functionality of the material you are by Toshiba on the right address.

    You use a third party and that you have some problems. Do you really believe Toshiba should support you and help to get this external peripheral work? In my opinion not. On the market, there are thousands of different devices and laptop computer how of the manufacturer must be able to test each of them and offer a solution?
    Something like that is definitely not possible.

    In my opinion, you should communicate with Mixvibes and ask for help. They have the best experience with own product and I presume that they are testing the features on different PC/laptop platforms.
    They should know how the device should work on new laptops with USB 2.0.

    It seems silly now, but Toshiba has nothing to do with it. If you have a general problem with the USB ports and they don t work with different devices that Toshiba should ask for help.

  • Problem with the file naming

    I can change my names of files successfully, mp3s to be precise, uniformly. Windows Explorer or Altap Salamander, there really is no problem with my file name.

    The problem starts to appear when I put my mp3s in my playlists (VLC, WMP, media player in my cell phone). The old file name keeps showing even though I have already changed the original/source file.
    For example, a song I downloaded bears the title "WTF * Chris Brown-int ' love ' so I changed it to 'Chris Brown - International Love' since that's how I name not all the thousands of my mp3s. But when I added the song to my playlist, the original title is one that appears and not the new. This case is the same with most of my Media Player.
    Is it possible for me to keep my desired/preferred file names when using the Media Player files? It's really so frustrating.

    Usually, media players like WMP does not show the name of the file of the song, but display the title and artist in the song tags (also known as metadata). To change these tags in WMP, add your songs to the library WMP library, right click on the tag you want to edit, and select Edit.

    You can also change the labels of the song with external tools such as Mp3tag.

  • Problems with cd player.

    * - Original title - .cda

    Soon after reinstalling new windows xp pro cd, cd players that worked very well started to only read > cda version info on the disks, that is, audio books, etc.. How can I reset ability to play mp3 files?

    Hi Samuel W.

    Welcome to the Microsoft community. I see that you have some problems with the cd player. I'll help you with this problem.

    1. What is the brand and model of the computer?

    2. what security software is installed on the computer?

    3. do you have an external CD drive or an internal CD drive?

    4. have you made changes on the computer recently?

    I suggest you to refer to this article and check if that helps.

    Drive your CD or DVD drive is missing or is not recognized by Windows or other programs:

    Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:



    How to back up and restore the registry in Windows

    I hope this helps.

  • Error: "corrupted error reports are rare. They can be caused by hardware or software problems and usually indicate a serious problem with your computer. »

    Original title: my computer was "rebuilt" with all the new parts June 2011. Logging on his shot and miss it may stay on or shut down and restart. I have this message when I turned on my pc this afternoon:

    Corrupted error report.

    Unfortunately, the error you report submitted is corrupted and cannot be analyzed. Reports "damaged errors are rare. They can be caused by hardware or software problems and usually indicate a serious problem with your computer.

    When I turned on pc today is showed a blue screen and can something on a disc because the disc did not work properly?

    I paid for all the new parts for my computer and the computer technician has assured me that all the work was completed and correct. I bought the power supply (1) mother board, cards (2) 1 TB of memory. (2) hard drives 1 TB. (1) card reader and other elements appearing on my Computer Geek Bill.

    My music files are no longer mp3 but .oma. He/the Tech added its own files and records of music of World War II. These game. The drive D drive or slave who held my music, he said he wiped clean.

    I need to know these error reports will completely close my pc and all the information will be lost?

    Hi satindoll11233,
    I recommend you to disable the auto reboot system error (this option prevents Windows to reboot automatically if a Windows error to fail) of the startup options safe mode to know the exact error message or error code originally this problem.
    For more information, see:
  • Problem with the last 5 minutes of the audio book to cut

    My wife recently bought a Clip Jam for listening to audio books. She had a problem with the end of books - the device does not play the last 4-5 minutes of the last chapter of a book. IOW, it ends at the beginning. It must then go to the desktop PC and listen to the end of the book he (proving it is not a problem with the files themselves). She said that this happens on audiobooks, Audible and audio books, it is in MP3 format.

    Someone has an idea what can happen and how I can help him solve?

    using improved format audible AAX? IIRC: it is a problem only with improved AAX format. Use the Format 4 and that she must play to the end.

  • Problems with playlists on Clip +.


    I am having some problems with the creation of playlists on the Sansa Clip + (4GB).  I have some MP3 files on the internal memory and I have no problem with the creation of playlists for these files.  But I have also some MP3 on my 8 GB MicroSD card (made by SanDisk, by the way) and I was not able to create playlists for these files.

    Let me clarify; I can create playlists for MP3 on the MicroSD card, but no matter where I store these playlists (internal memory or the card itself) I have problems.  If I store playlists on the internal memory of the content of these playlists disappears if I unplug the card.  Playlists are still there, but they are empty.  If I store those playlists on the MicroSD card (where are the MP3 files) and later to unplug the card, the playlists are transformed into something completely different.  The file names are replaced by something starting with a whole bunch of numbers and the playlists are not recognizable.

    I am also having the same problem when I copy MP3s directly on the MicroSD card - the names are changed and there are a bunch of unnecessary additional files added.  The problem gets worse if I put the music in the files on the MicroSD card.  At least if they are all in the same folder that I can get rid of unnecessary files.

    I should probably mention that I do not use the crazy method they recommend manual synchronization of the user with Windows Media Player.  It takes too long and it's too complicated.  Instead, I just select the songs I want in any playlist special (I copied on my micro SD my PC card) and make a right click on any of the selected files and a context menu appears and gives you the ability to create a Playlist - (in Windows XP SP3).

    It works very well on the internal memory.  This is how I did it on my regular Sansa Clip and it worked without any problem at all.  But it will not work with any files on my MicroSD card.  I did something wrong?  Or is my card MicroSD does not work properly?

    Any help would be greatly appreciated.  Thank you.

    Well, I solved the problem I've been create permanent playlists for MP3 stored on my MicroSD card.

    What I've discovered, is that the new Clip + doesn't seem to like the playlists created in Windows Explorer (i.e.; Choose the songs / right click / Choose "create Playlists) with the extension of file .pla

    Which works very well for any MP3 stored on the internal memory, but not for files stored on the card.

    I use a free program called Playlist Creator 3.6 to create playlists in .m3u format.  This is the format that works for MP3 files on the MicroSD card.

    I make selections in the folder my music is stored On MY PC - then I copy this .m3u playlist folder On THE MicroSD CARD where my MP3s are (those of the playlist I just created).

    You need to copy the list of reading in the same folder that your music is (on the map).  As long as the MP3 in the same folder as the .m3u playlist - the playlist will find them.

    Now, the playlist seems to be empty if you try to open them in Windows, but don't worry-there is work.  The info is still there.  And playlists keep the info and the names you give them even if you remove the card and later put it again.  Hope it will be useful to someone else.

  • Problem with the playback of an audio .asx file in Windows Media Player.


    I'm not able to play an audio .asx file in Windows Media Player on the Windows Vista-based computer.

    I get the following in a pop-up error message:

    Windows Media Player cannot play the file because the specified protocol is not supported. If you typed a URL in the open URL dialog box, try using a different transport protocol (for example, "http:" or "rtsp:").

    Help, please.

    My email address is * address email is removed from the privacy *

    Thank you.



    1. facing this problem with the .asx format?
    2. you remember to make changes to the system?
    3. where is the file?
    Error message: "Windows Media Player cannot play the file because the specified protocol is not supported. If you typed a URL in the open URL dialog box, try using a different transport protocol (for example, "http:" or "rtsp:"). »
    Windows Media Player cannot play the file because the specified protocol is not supported by the player or not supported by the server.
    If you encountered this error by clicking a link on a Web page, the link isn't valid.
    If you encountered this error by typing a URL in the open URL dialog, try opening the file using a different transport protocol (for example, "http:" or "rtsp:").
    The following is a list of protocols supported by the player and the correct URL syntax examples:

    (a) MMS://serveur/nom_fichier (for example, a file with a .wma, .wmv, .asf, or .mp3 extension)
    (b) http://server/filename
    (c) rtsp://server/filename
    (d) mms://server/sami.asf? SAMI = http://server/sami/sami_demo.smi (SAMI file)
    If the Player supports the protocol you used in the URL and you can't always read the content, check that the drive is configured to use all of its supported protocols.
    To configure the protocol settings
    (a) in the Player Windows Media, on the Tools menu, click Options.
    (b) in the Options dialog box, on the tab of network in the Streaming protocols area, select all the checkboxes (Multicast, UDP, TCP, and HTTP) Protocol, so that a check mark appears in each.
    (c) note that the supported protocols can be used only to distribute digital media files. Windows Media Player cannot be used as a browser.
    If the fixes above don't work, you can rename the folder of information network for the drive so that it can rebuild its information network files after restarting it.
    To rename the folder of information networking of player.

    (a) close Windows Media Player. (To do this, on the file menu, click on exit).
    (b) to make the changes that you will be able to see the hidden files and folders
    Show hidden files.
    (c) click Start, and then click computer.
    (d) open the disc drive Local (c :)), open to users.
    (d) open your user account.
    (e) open %APPDATA%\microsoft\windows\sendto and open Local.
    (f) open Microsoft and open Windows Media.
    (g) click on the file and rename it.
    (h) if the file is name12.0, edit as file name as old 12.
    (i) restart the computer and check
  • Problem with sound on my laptop speakers

    I have a problem with the sound in my PC, when I want to read a file (music, video), there is no sound to hear. for example, I want to play an mp3 file, windows allows player to media me this message "Windows Media Player encountered a problem while playing the file. For any additional help, click Help on the Web. ». Also when you browse the internet, there no sound when I play a video from youtube too. I tried to fix by updating the audio driver, but it is already up to date. And I tried to fix it by going to fix the Center Online (from Microsoft), but still no use!
    I will be happy if you give me an answer to this problem.

    Problem solved, I ran a quick of my microsoft security essentials... not found threat scan. Finally, I rebooted my PC... sound came back to normal.

  • I'm having a problem with my Windows Vista operating system. Problem started on 19 February 2011.

    I'm having a problem with my Windows Vista operating system. I have a Toshiba Satellite A135-S2376. Problem started on 19 February 2011. Computer continues to display Windows Explorer or Microsoft Windows has stopped working messages. Cannot run all programs, sharing disk cleanup, System Restore. Cannot download IE 9. Help, please! For example: tried to run MP3 Rocket he was trying to load & then a message appears at the top that States platform Java cannot run or something to that effect. Basically, I can't run any program that needs to use Microsoft Windows.


    You can try to do a system restore before this date

    If necessary do in safe mode

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode option with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    and malware scan

    Download update and scan with the free version of malwarebytes anti-malware

    You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

    If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode with networking with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

Maybe you are looking for