Problems with images and files.

After a computer no serious crash a few 6 months or so there are certain details applicable to each image below the icons of my photos turned the black normal script in blue and it is only in a few cases, although it doesn't bother me too much and they can be used, can it be reversed as it is annoying? recently, another point when I load more new photos to a new folder, if some require clock or anticlockwise, I sometimes get this notice of refusal, "cannot rotate this image that this file can be used or opened in another program or file or the file may be read-only." but none of this can be good as I just placed it new pictures in this folder. How to correct these problems?

Hi J MVP, volunteer

Thank you very much for the information that informed me of the files compressed, I asked several people about what it could be, but nobody seemed to know, your solution worked a treat, I've heard of file compression but has never had the need to use this method at all for a reason, and it was only caused initially by the computer crash.

To answer your question above, the source of the images are directly from the camera, a Sony DSLR 550, via a USB cable, they are loaded into the computer, directly in a set end folder, there is reason for the type or the date at which the photos were taken, which is located in the folder "my pictures."

Then I get to work with it on Photoshop, after I saw what I want to keep or discard, it's when I have a few photos activate in order to view properly, this problem only comes to occur for the first time as yesterday.

At the same time I could turn several photos at once 3 or 4 + at a time, but it will now allow me only to make an at once it does not account for the rest, too, sometimes in the past when I turned a picture turned it the image on the screen but the icon remained impassive (this can happen sometimes at 3 or 4 in a row) When I then performed the same maneuver to the next image in the sequence, the previous icon also then becomes his main image returns to its initial position, but this happens only rarely.

Only when I turn it dose it then right and eventually become stable, these odd little blips, I put in place with for some time, but this last problem, the fact that I can now have a soft image to look at, but can not turn as the computer says 'No', I must confess a again becomes quite painful.

I've never confessed to be a computer buff, I want only to work on the photos for me and my pleasure to families and our web site, but when things like this crop up I admit that I have no idea where to start and so the reason I am looking for assistance.

Thanks much again for all your help.

Best regards

Mahoganyoak

====================================
Nice camera...

OK... with regard to the question of the rotation... I don't know exactly
answer, but will provide some info that may help you solve
the question. I'm sorry that the message is so long but here
is a lot of things that could be involved. I'm sure you
know your system well enough to forget useless
steps: o)

Since you're using Photoshop to rotate your images...
It is possible that the solution might be found in Photoshop
Supported.

Adobe PhotoShop help and Support
http://www.Adobe.com/support/Photoshop/

Personally I do not download photos via a USB cable...
on the one hand, it irrigates the batteries from the camera. But the
main reason is that corruption can develop in the photos
If the batteries are low when the download is triggered.
An example of how this happens download photos
immediately after a session of photos long when batteries
are low. I suggest to use an internal or external
Media Player.

Given that the question of the rotation recently developed... make one
Restoration of the system Mode without failure for a time before the
problem began could be worth a try.

See the following articles:

(306084) how to restore Windows XP to a
previous state
http://support.Microsoft.com/?kbid=306084

How to restore a Windows XP system to a previous state using system restore
http://bertk.MVPs.org/

(315222) a Description of the Safe Mode
Boot into Windows XP options
http://support.Microsoft.com/?kbid=315222

How to start safe mode in Windows XP
http://bertk.MVPs.org/html/SafeMode.html

Also... the regular system maintenance can improve
some of the issues. Maintenance of sufficient free space on your
hard drive is also useful. I keep my free to at least 50%.

Empty your temporary Internet files folder.

(260897) how to remove the content of the
Folder Temporary Internet Files
http://support.Microsoft.com/?kbid=260897

Run Disk Cleanup, error checking and
It is a good idea to defragment regularly schedule.

(310312) description of the disk cleanup
Tool in Windows XP
http://support.Microsoft.com/?kbid=310312

(315265) how to perform disk error checking
in Windows XP
http://support.Microsoft.com/?kbid=315265
(check two boxes... "automatically repair the file.
System errors' and ' search and try to.
recovery of bad sectors"), the utility will run
the next time you restart your computer.
(run check several times until it finds errors
no error)

(314848) how to defragment your drive
Volumes of disk in Windows XP
http://support.Microsoft.com/?kbid=314848

Sometimes Thumbs.db files can be damaged...
personally, I have remove and disable their creation.

What is thumbs.db, and can I delete it?
http://ask-Leo.com/what_is_thumbsdb_and_can_i_delete_it.html

Shut down Windows to save the cache of thumbnails (THUMBS. DB)
http://www.annoyances.org/exec/show/article03-204

What is the thumbs.db file and how it remove?
http://www.pchell.com/support/thumbsdb.shtml

Next... it can be interesting to try to run the following command:

Open an image in Windows Picture and Fax Viewer...

Hold your Ctrl key and close the Viewer... (X on the title bar)

You should see a dialog box stating:

"Any rotation warnings that you have deleted."
zero prior and can reappear when you
Rotate an image. »

Now, you may need to run the following command:

Reach... Start / run and type
(or copy and paste):

regsvr32 /i shimgvw.dll

(Yes, the space after the 2 and the)
After the i is necessary)

Press on... Come in...

You should see a dialog box stating:
DllRegisterServer and DllInstall in successful shimgvw.dll
Try to turn your photos...

To reset the rotation dialog box... try the following...

Open an image in Windows Picture and Fax Viewer...

Hold your Ctrl key and close the Viewer... (X on the title bar)

You should see a dialog box stating:

"Any rotation warnings that you have deleted."
zero prior and can reappear when you
Rotate an image. »

Now, you may need to run the following command:

Reach... Start / run and type
(or copy and paste):

"" REGSVR32 SHIMGVW. "." DLL.
(without the quotes) (Yes, it is)
a space between 2 and S)

Click on... Ok.

A dialog box should include the following:

"DllRegisterServer in SHIMGVW. DLL succeeded.

Try to turn your photos...

Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

Tags: Windows

Similar Questions

  • Thumbnail images do not match with images and file names

    I got a surprise this morning! Thumbnails of my photos do not match with the real images and file names. File names correctly matching the real images. Pls help how to fix. Could it be caused by a virus?

    I got a surprise this morning! Thumbnails of my photos do not match with the real images and file names. File names correctly matching the real images. Pls help how to fix. Could it be caused by a virus?

    ==========================================
    What version of the program / are you use ot see the pictures?

  • problem with image and pdf files to print

    Hello

    When I want to print images and PDF files in windows 7, it takes too much RAM space so small capacity it has (for example, the file has 52 KB capacity, but it takes 21 MB of RAM)

    and I have to wait until this file (image or PDF) completely buffered in RAM, and that is problematic for me.

    Help me please.

    Thank you

    Hello Amirafshari,

    Thanks for posting your query on the Microsoft Community.

    We need to know the following information to isolate the problem:

    1. When you print files no PDF, you have the same problem?
    2. What are the specs of your PC?
    3. Where are the files located? Is this an internal or external storage device?
      • If the file is located in your external storage space, you can transfer into your internal storage space first before printing.
    4. Have you tried the activation and deactivation of your print spooler? If this isn't the case, please follow the steps below:
      • Go to CMD.
      • Type "net stop spooler" and press ENTER to stop the spooler.
      • Type "net start spooler" and press ENTER to re start the spooler.

    Let us know how things are going.

    Kind regards

    Jamille Nar

  • Problem with images and text of Kaleidoscope

    Dear reader
    I'm having a problem with the Kaleidoscope of the content in the left column of my Web page. It will align correctly in internet explorer, but I would like it to also align correctly in Opera and Firefox as many people use browsers thise also. Here are links to the screenshots to show you what I mean. The problem is selected in orange.
    http://www.iggpog22.com/mystuff/gap.png - there is a gap between my star logo and the header image 'links '.
    http://www.iggpog22.com/mystuff/nogap.png - there is no difference between my star logo and the 'Links' header image in dreamweaver so that is how I like to view.

    If someone could offer some advice, I would be very grateful. I generally try to develop things for me, but this problem has left me speechless. I can also provide the html code is that need you. Thanks again for any response.
    . Sam

    Edit
    This is a link to a .rtf file of the code for the Web page
    http://www.iggpog22.com/Mystuff/ig2code.RTF
    You can also visit my Web page at the www.iggpog22.com (I include www. otherwise, it shows the wrong website)
    I hope that's enough to be more useful

    Monday, July 16, 2007 15:42:53 + 0000 (UTC), "02cspearson".
    wrote:

    > http://www.iggpog22.com/mystuff/gap.png - there is a gap between my star
    > logo and the image header 'links '.
    > http://www.iggpog22.com/mystuff/nogap.png - there is no difference between my
    > star logo and the image header 'Links' in dreamweaver, but that is how
    > I would like it to appear.

    Problems of this kind always requires that we look at the code of the page. There
    easier to diagnose if you post a link to the actual page. Fortunately, I
    has been able to find the URL of the screenshot. What you see is the
    top margin on the paragraph around the links.jpg image. You can fix it
    by changing this:

    <>
    SRC="images/Iggpog22Index/headers/links.jpg".

    To do this:

    <>
    SRC="images/Iggpog22Index/headers/links.jpg".

    Gary

  • Serious problems with images and text

    Hello, I created a little site selling comics (www.lecosechecipiacciono.it/mercatino).
    Basically, I created a few pages that presents images of comics for sale and the widget paypal for the payments.
    But strange things happen because whenever I'm working with MUSE because always asking me to check the images. I thought it was a small problem, so I continued to work. Now, I noticed that MUSE is the confusion between all the pictures of the pages created (change the link from them so I got a blanket indeed another) and now I found that she changed the text with the information that I have never insert (for example, the number of strips drawn).
    I saw that also eliminated a lot of information on the paypal widget (point number, price and so on...!).
    I have created many pages and these problems are quite frustrating for me because I saw that arrange text and photos MUSE still has similar problems. It is therefore impossible to work. What can I do?
    May be the problem, I often move the folder between a computer and others working on the site?
    Let me know, otherwise I have to change the software to create websites because all this is madness...

    UPWARD...

  • problems with. ARW files and invigorating auto

    problems with. ARW files and invigorating auto

    I'll try to explain this, because this has happened in past and never found a way to solve, but I lived with it

    now that I have a Sony A7R the problem is more serious

    First I'm proud he realize the image in camera, I use DRO lvl 5 to get enough light, as when I'm shooting at dusk. DRO desire to do HDR but in a single file, it lightens the dark colors. in my camera, I'm happy with the results

    but when I download on lightroom, they come out almost black.

    Let me explain

    Let's say I have import 100 images

    I'll double check my preferences and everything is turned OFF when you want to import options, there is no auto toning, nothing.

    import the images I see glimpses in miniature that looks very good.

    I double click on one to enlarge, we go out so grid view.

    for a short 1 or 2 seconds, I see the full image in all its glory but that lightroom is doing something funny, it darkens the image

    an as she inspects every image, it was a DRO picture, it's too dark.

    to make this clear, the image is perfect, as it was in the beginning but after a few seconds, lightroom for some reason some think should be corrected.

    How we prevent lightroom to do this, I want the image exactly as it is, why lightroom must apply a correction >?

    I think we should do something with the interpretation of the raw file and lightroom applies its own algorithm.

    but here is what I get... until lightroom makes the change that I am able to testify the image exactly as he took and want unchanged...

    now, I have to edit each file or find a profile to which is added the work.

    any ideas how to prevent the ruin my lightroom images and just leave them as they were during the first time...

    There are 2 phases... it is when it imports initially and they look very well

    second are analysis each image and application of some type of toning that it darkens too.

    Thanks for the help

    Sorry, it's the yahoo email auto-reply message.

    I've now disabled

    thing is, there is no DRO jpg to download from the camera

    his only ARW. so my understanding is when I use the DRO setting, the camera makes changes to the ARW lightroom this bed somehow the ARW.

    but he comes back and unfortunately no DRO setting.

    because I noticed that if I take a normal image in his dark raw mode but if I apply dro to it, it comes out more bright, yet when I d/l the camera image in lightroom, which is an ARW - there no jpg files. Lightroom decides to BUMBLE

    So actually there is no interest to use DRO because when I download lightroom deletes.

    is there a way to tell lightroom to preserve the jpg preview as seen first.

    his right blade, image appears perfect... that lightroom do something, that bam, its ruin.

    What should I do to prevent ruin the image of lightroom? If it was good in the first place.

  • problem with the Finder - files and folders displaying incorrectly

    After acquiring a new iMac, I noticed a problem with the Finder - files and folders are displayed wrong (see table).

    This is what happens always after the files have been transferred from one folder to another. I was reminded of my days of using Mac OS in the 1980s when automatic setting of files was not so "automatic." I use Mac OS for decades and I don't remember the last time I had to think about GUI problems like that.

    Other problems in the graphical display of files and folders were introduced, such as when you have hundreds of files in a single folder, you end up deleting about 30 to 40 of them say in a particular section, and you end up with gaps of the ChartSpace where files used to be, that is the remaining files automatically rearrange themselves (fill in these gaps) - never. A week later, you open the folder, and the gap of GUI is still there.

    I decided to do a clean install of the operating system but nothing works.

    Is there some setting in Prefs I'm missing?

    Hi there highland99,

    Looks like your folder icons are not accommodating themselves automatically you plan to do. To me, this indicates that you have organize by the None value in the view menu. You can change the way files and folders are prepared automatically by clicking on view > reorganize by and selecting how you would like that fixed.

    Thank you for using communities of Apple Support.

  • curious problem with extrusion and rotation

    I found a curious problem with extrusion and turn into the CS6. It's not a bug, but it's a behavior that is less intuitive who is confused and sometimes painful. I think it is something that should go on the list of tasks for the devs. Someone else, right? Don't agree?

    Example:

    Rotate_issue.jpg

    I started with a path arrow, to which I applied the effect "extrude". I then put an icon on top of the arrow and grouped in the icon and the arrow. Now, I use this icon arrow in several different parts of my design, in different orientations. I flip the arrow, the relative position of the icon and the arrow seems to pass. I believe that this is happening because when you rotate the arrow icon, Illustrator rotates both the icon and the arrow on the center of the underside of the arrow. This is because the upper side of the arrow is essentially fictitious, just an artifact of the effect of extrusion. So, even if the icon appears as if it is drawn on the upper side of the arrow, it behaves as if it is attached to the underside of the arrow. When you apply a transformation, this transformation impacts on the underside of the arrow, causing the top of offset from the icon.

    The solution would be to add an extra box to the effect of extrusion, asking if you wanted to extrusion (the way things are currently done) upwards or downwards. If you can extrude downwards, then the upper side of the arrow would be the 'real' face, those affected by the changes. You can then put a picture on the top, the arrow and the image of the group, and when you apply a transformation, the icon would remain fixed relative to the top, which would be consistent with your intuitive expectations.

    If anyone is curious to experiment with this particular example, I posted this file in Google Docs here:

    https://docs.Google.com/file/d/0B0Hoxcl5zTEtTXo5QnNsMGwwOGc/edit?USP=sharing

    It's about what you just mount the image with a transformative effect to match the extrusion.

    So basically, you apply a 3-d rotation effect to your image to match the rotation of your arrow, then you apply a transformation movement in the vertical axis to match the height of your extrusion.

    hope this helps

    https://docs.Google.com/file/d/0B4ilRoSBagc3d2w2Ylc2cWxFVjA/edit

    If you want to get real on this issue retro we only corresponding to the rotation of the arrow in the center of the extrusion, if we wanted to distort the image perfectly, the rotation should be slightly higher, but anyway, it is hardly noticeable.

  • Problem with IMovie and Quick time

    Hey everybody,

    I am faced with an unexpected problem with Quicktime and I Movie, and I was wondering if someone had already known that:

    I want to create a film based on shots from my personal camera. I started to work with IMovie to create a sequence of opening and added his musical band. I exported the scenes in Quick Time format without any problem. However, when I merge the exported sequence of I film with shots of my video camera, the soundtrack is completely eliminated.

    I checked on the Internet and saw that there might be a problem of "Codecs". To avoid this, I exported the sequence IMovie with Codecs of same as one of my video camera files.

    Now, if I compare the files exported from I Movie and those of my video camera, they have identical characteristics. However, the soundtrack will always disappear when I merge them.

    Could someone please help me solve this problem?

    Thank you very much in advance.

    Concerning

    Could someone please help me solve this problem?

    Not only based on what you already said.

    I want to create a film based on shots from my personal camera. I started to work with IMovie to create a sequence of opening and added his musical band. I exported the scenes in Quick Time format without any problem. However, when I merge the exported sequence of I film with shots of my video camera, the soundtrack is completely eliminated.

    How would you"merge" files? (I.e. a "QuickTime" format is any form of data compatible with the platform of supply and the specific structure of QT incorporated into real employment that is stored in a container of MOV file on any of up to 99 tracks possible). Also, what app do you use for reading the file 'merged '? (For example, some media players ignore secondary audio tracks as a result of some methods of 'fusion' of files so it is important to know how the files are "merged," whether or not the audio data are "scattered" several tracks, and/or if the Media Player supports playback of multiple, sequential audio popular.)

    I checked on the Internet and saw that there might be a problem of "Codecs". To avoid this, I exported the sequence IMovie with Codecs of same as one of my video camera files.

    The specific codecs and settings using the specific version of iMovie? (The current Mac OS X operating systems have two X QT and 'classic' Qt integrated structure so it is important to know what structure is used here and how).

    Now, if I compare the files exported from I Movie and those of my video camera, they have identical characteristics. However, the soundtrack will always disappear when I merge them.

    As a general rule, you should review the file "merged" to determine why it does not play back correctly rather than comparing the characteristics of the source being merged files. The main problem here seems to be in your project workflow. That is, you seem to be when you perform an operation in two steps rather than edit several iMove multimedia files and then export the combined results in a video the video and audio tracks have been flattened and exported in standard compression formats with unified settings, features and the.

  • problem with Safari and the opening of sites

    problem with Safari and the opening of sites

    Please describe the problem in more detail?

    Try to reset the settings of Safari:

    1. open Safari

    2. click on the Safari menu at the top (to the right of the Apple logo)

    3. Select the Preferences/Privacy tab

    4. click on remove all data from the Web site

    5. close Safari.

    Remove cache Safari files:

    1. click on finder

    2. look for the menu GO to top

    3. click on GO and hold down the option key. This will show a user library folder.

    4. click library and find the Caches folder

    5. in the folder caches com.apple.Safari Ouvrezledossier

    6. move the Cache.db file Trash.

    This should solve the problem. If it does not help, try to disable the Safari extensions

    1. open Safari

    2. click on the Safari menu at the top (to the right of the Apple logo)

    3. Select Preferences

    4. find the Extensions tab

    5 disable all extensions of

    6. relaunch Safari

  • Problem with the executable files

    Hello all, I need a help from you...

    I use LV 2009 SP1 Professional Development Suite on Windows Seven and I have a problem with the executable files, a problem that I have ever found with other versions of LV (8.x, for example) and I'm a little surprised...

    In the attachment you will find an example of what I mean.

    There are two base screws, the main one (prova) and a Subvi (provasubvi). The main vi launches the Subvi and the Subvi simply create a chart. As you can see on the screws works fine, without any kind of problem.

    I also created the exe file, without specifying that no particular option... and 'magic' of the application does not work as I want. In particular, it seems that the Subvi is running, but the front panel will not be accessible.

    I also try to play with the Subvi construction structure and options, but nothing change.

    Did you ever solve something like that?... I would say that I thank you in advance for any suggestion...

    Andrea

    Hello andrea,.

    Looking at your project I've heard that you do not include the Subvi during the build of the project. SO I slightly modified. Please find the attachments.

    Thank you and best regards,

    srikrishnaNF

  • Problems with word and PDF after computer crash. Error "user has access privileges."

    Problems with word and PDF after crash

    My computer crashed and I had to run the recovery disk, the repair option, so he could run again. It does not format my computer but I had to re - install several programs. I reinstalled my copy of office for example.  I have an external hard drive where I put most of my files but since installing the recovery disc, it does not open some Word documents and gives a message error "user has not access privilege." It's the same thing with some pdf files. What can I do?  Please help because I can't open some of my documents from the University.

    Hello world
    I would like to just say thank you for your help and the problem is now solved.  In the end I paid someone to sort it out.  He explained that it was something like permissions for some of my files were owned by my old operating system and after that my computer crashed and I had to put through the recovery disc these permissions have been lost.  He told me that he had a program that looked for the old existing and re-installed.
    Thank you.

  • iTunes won't download because of problem with Bounjour and Windows Installer

    I have windows vista and I can't use my itunes more.  I tried to download again and it says that there is a problem with C:\Program Files\Bounjour\about bonjour\.rtf.      It also says there is a problem with the Windows Installer Package to complete the download.  I can't find that anywhere in my computer files!  Help!

    I have windows vista and I can't use my itunes more.  I tried to download again and it says that there is a problem with C:\Program Files\Bounjour\about bonjour\.rtf.      It also says there is a problem with the Windows Installer Package to complete the download.  I can't find that anywhere in my computer files!  Help!

    Here are the Apple Discussions: itunes category, installation & Upgrading iTunes for Windows:
    http://discussions.Apple.com/forum.jspa?forumid=792 . for the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

  • I have problems keeping records and files of the administrator and the user separate in my laptop (HP Pavilion dv6700) under Windows Vista Home Premium.

    I have problems separating records and files of the administrator and the user. My computer is a laptop (HP Pavilion dv6700), used as a home computer only by myself, I like to keep the two distinct roles, but am unable to as Vista seems to be considered as one and the same. This scenario has arisen as follows:

    Initially, when I bought the laptop - approx. 18 months back - Windows Vista Home Premium was preinstalled, with the name 'Administrator' as an administrator. To customize the operating system and to use safely, I installed a user 'Renault', as a Standard account user.

    After awhile, I changed the name of the Director of "Renault", for reasons I have can not remember now. This caused Vista to combine folders and files of the two "users" in one, I found difficult to deal with, that I could not operate my laptop as just a Standard user, but is still considered the "administrator." On the one hand, this greatly increased spam in my email accounts. So I tried to reset the name of the administrator as 'Administrator' itself and keep my user name as "Renault", as originally the case.  But Vista me has failed to create a new user under the name "Administrator". So I created a new user under the name "System administrator", with administrative privileges. This has been accepted by Vista.

    But I forgot to change the user account for 'Renault', on the Standard account, so there was BOTH administrator accounts at the same time on my laptop! I realized that now only. The net result was that all the files that I created under the system administrator user were still being displayed under the user account of Renault. A few days back, I realized this and tried to separate the files correctly, but it has not been possible. No matter what I copied the account of the user in the files under the system administrator account, the files have been copied on account of the user himself.

    I tried to fix this by changing the name of the user account in something very different, AND as a Standard user. but this also does not work, as all folders and files under the administrator account system shows it as being under the user account of "Renault" only!

    Then, I deleted the user 'Renault' from the list of the user, but he was not yet of any help. Whenever I tried to create a new file under the system administrator, Vista responds with the message, "C:\user\Rajaram folder is not present. Will I create a new? ", which defeat the same purpose of my tent to isolate the administrator account and the user account.

    SOMEONE HELP ME PLEASE WITH A SOLUTION, - OTHER THAN REFORMATTING MY C:\ DISK AND REINSTALL VISTA AGAIN - TO GET OUT OF THIS MESS, IT SEEMS TO ME YOU HAVE CREATED AND HELP ME TO HAVE AN ADMINISTRATOR ACCOUNT AND OTHER UNIQUE STANDARD USER ACCOUNTS PROPERLY ISOLATED.

    I would be always grateful for a quick and helpful response.
    Thanks in advance.

    -RAJARAM77
     
    Thanks for your reply. It was very helpful / sorry your proposed solution has not solved my problem. Kind regards. -Rajaram77

    Better to delete the user account except the one that was built in the administrator account that you renamed. Before this backup all your data files of these user accounts.
    Then rename the buil into account administrator as 'administrator '. Then you create another administrator account and use it and never the user built in Administrator account and leave it alone.

  • Problem with Illustrator and InDesign

    Hello, I am facing a problem with Illustrator and Indesign, when I copy a vector object from Illustrator into Indesign, I get the error: "import EPS file: InvalidFileAccess.»

    The file is saved on the pc, but I encounter this situation also files stored on the NAS.

    Any suggestions?

    Thank you to everyone

    InDesign has a preference of Clipboard, have you tried him affecting prefer PDF when pasting?

Maybe you are looking for