Problems with incoming calls not being recognized

Similar Questions

• Problem with incoming calls!

  Can anyone help?
  When my phone rings with an incoming call, my screen remains white. I do not see who is calling you, nor I can answer the call!

  I've restored my phone to factory settings. I followed the process of repair with PC Companion & still does not work!

  Help, please!

  Hi, go to settings - Apps & forehand, then scroll down to IncallUI & select...

• SPA 3201 - problem with incoming calls

  Hello

  I installed a new SPA 3102 connected to a mini Server asterisk; catches of phone line to connect to the existing line of the Earth and the phone.
  The unit has current firmware, and the one and only ethernet cable taken in the WAN port - these two steps make a working direction. I can dial a number on the phone, the call goes through the asterisk and goes out to the PSTN.
  The other way, however, does not work: I get syslog entries that the call is detected, but the device doesn't send what anyone on the server (as checked with wireshark)
  The dial plan is
  (S0<:1234>)
  but I also tried
  (S0<>[email protected] / * />)
  and some variations more

  This is syslog entries:

  FXO:start CNDD
  Number of the caller analysis = callingnumber
  -Caller ID:
  -Name = (null)
  -Number distance = callingnumber
  -Dialable number = (null)
  -No reason number = (null)
  FXO:CNDD = name, number is callingnumber
  FXO:stop CNDD
  Phone = FXO:CNDD name = callingnumber
  Your RTC AUD:Stop
  FXO: on the hook
  Your RTC AUD:Stop
  the next sequence is repeated several times, probably as long as the line is actually ringing
  FXO:start CNDD
  Your RTC AUD:Stop
  FXO: on the hook
  Your RTC AUD:Stop
  FXO:stop CNDD

  Where would I look next?

  I found a tip in an ongoing discussion, and in fact this has solved the problem: "PSTN ring timeout" must be longer than the time to ring + break from the ring, and "Time of response to PSTN" must be short enough

  Unfortunately, if incomplete description of configuration. There are so many dial plans to set, but it has not specified that have configured it.

  Please read before RTC call the SPA3102 to VOIP. I hope this will help you.

• No voice with incoming calls PAP2T

  I bought a LinkSys PAP2T unlocked last year that worked beautifully until a few days ago. Outgoing calls work fine, but I now have problems with incoming calls only.

  When I receive an incoming call, the phone rings, but when I pick it up, I can't hear anything and cannot the caller on the other end. After a few seconds, my phone disconnects and begins to beep as if the line is busy. This occurs regardless of who calls me and whther they use a VoIP device or a normal PSTN phone. I have not changed the settings on the router (a Belkin) or the PAP2T, he simply stopped working a few days ago! I have a connection 10MB Virgin Media broadband service for my VoIP provider is Draytel that have verified the account and settings and says it works very well on their test kit.

  Since then, I tried just using line 2 and the deactivation of line 1 to do a hard reset of the PAP2T and updated the firmware to the latest version. Even tried to change the analog phone connected, but I still have the problem.

  Does anyone have any ideas as to why it suddenly stopped working with anything has been changed and what I might be able to do to fix? The PAP2T is still the title of the 12 month warranty period then maybe she developed a fault?

  Thank you very much in advance for all those who can help you.

  Cheers, Vic

  For me it looks like the problem of RTP streams - probably, it does not pass the firewall / nat on the path between SIP provider and you.

  This may have is that your Belkin router/NAT, or on internet ISP router/NAT enabled SIP ALG (Application Layer Gateway).

  If this is the case, you will need to disable SIP ALG on your router or ask your ISP internet to disable on the firewall router.

  Another question may have been if you (accidentally) changed the port forwarding on your Belkin router, or the PAP2T local LAN IP address changed and port forwarding is no longer works.

  So my proposals to check:

  -check and DISABLE SIP ALG on your Belkin (if the router has this feature)

  -check the port forwarding on your router Belkin... IF you set up port forwarding for 5060/61 you MUST set the same for RTP ports (16384-16483)

  -If you don't have port forwarding on your Belkin, try before installation of 5060-5061 AND 16384-16483 *.

  * (If this is too many ports, set the RTP on PAP2T portrange to 16384-16394 for example and then forward only go)

  -If neither of above of aid, change your SIP Line1 of 5060 for port we will tell 6070 and RTP ports to the beach we'll tell 17300-17310

  -Finally, you can do it on your side is to remove all the port forwarding and put the PAP2T to your router Belkin DMZ settings.

• TC7.2.1 problems with SIP calls

  Hi, we had the following problem with sip calls:

  Here is the log:

  Version of the VCS software: Platform X7.2.3 | X8.2.1 Labor

  ______________________________________________________________________________

  Call with TC 7.2.1 does not
  ______________________________________________________________________________

  SIPMSG:
  | INVITE sip: [email protected] / * / SIP/2.0
  Via: SIP/2.0/TCP xx.xxx.60.133:57597; branch = z9hG4bK38f566387dbd719702049ddcb2590ebe.1; rport
  Call ID: 4832bd6a60d9d3d43670c55c573667ec
  CSeq: INVITE 101
  Contact: sip: [email protected] / * /: 57597; gr = urn: uuid:6 c 856033-4cbd - 5 b 15 - bb13 - 0715c4a694cd, ob>
  From: "201101102_C40_ServiceDesk" sip: [email protected] / * />; tag = d25377890df67530
  To: sip: [email protected] / * />
  Max-Forwards: 70
  Directions: sip:xx.xxx.1.51; lr>
  Allow: INVITE, ACK, CANCEL, BYE, update, INFO, OPTIONS, CONSULT, INFORM
  User-Agent: TANDBERG/521 (TC7.2.1.cb31c3d)
  "Proxy-Authorization: Digest ="bb1d830b2d64949caaadfb732cd7ca77414a991699854e8971970a68fe06"nonce, realm ="tplabvcsc01.xyz.com", qop = auth, opaque = 'AwAAAMSaxlh37 + YNQULdXHDdMkXYHVQ1', user name =" ", uri ="sip:xyz.com", answer is"51f225da16a3ac710e86c1b1b5815438", algorithm = MD5, nc = 00000008 cnonce ="21c839c8313e8f7f7477786cb40c5ee6. "
  Supported: replaces, timer, 100rel, gruu, way, way out
  Session time-out: 1800
  Content-Type: application/sdp
  Content-Length: 2842
   
  v = 0
  o = xx.xxx.60.133 IN IP4 6 2 tandberg
  s = -.
  c = IN IP4 xx.xxx.60.133
  b = AS:6000
  t = 0 0
  m = audio 16424 RTP/AVP 107 108 109 110 104 105 9 15 18 8 0 101
  b = TIAS: 128000
  a = rtpmap:107 m4as-LATM/90000
  a = fmtp:107 profile-level-id = 25; object = 23; bitrate = 128000
  a = rtpmap:108 m4as-LATM/90000
  a = fmtp:108 profile-level-id = 24; object = 23; bitrate = 64000
  a = rtpmap:109 m4as-LATM/90000
  a = fmtp:109 profile-level-id = 24; object = 23; bitrate = 56000
  a = rtpmap:110 m4as-LATM/90000
  a = fmtp:110 profile-level-id = 24; object = 23; bitrate = 48000
  a = rtpmap:104 G7221/16000
  a bitrate = 32000 fmtp:104 =
  a = rtpmap:105 G7221/16000
  a = fmtp:105 bitrate = 24000
  a = rtpmap:9 G722/8000
  a = rtpmap:15 G728/8000
  a G729/8000 rtpmap:18 =
  a = annex b fmtp:18 = yes
  a = rtpmap:8 PCMA/8000
  a = rtpmap:0 PCMU/8000
  a rtpmap:101 telephone-event/8000 =
  a = fmtp:101 0-15
  a = sendrecv
  m = video 16426 RTP / AVP 97 126 96 34 31
  b = TIAS: 6000000
  a = rtpmap:97 H264/90000
  a = packetization-mode=0;profile-level-id=428016;max-br=5000;max-mbps=245000;max-fs=9000;max-smbps=245000;max-fps=6000;max-rcmd-nalu-size=3456000 fmtp:97
  a = rtpmap:126 H264/90000
  a = packetization-mode=1;profile-level-id=428016;max-br=5000;max-mbps=245000;max-fs=9000;max-smbps=245000;max-fps=6000;max-rcmd-nalu-size=3456000 fmtp:126
  a = rtpmap:96 H263-1998/90000
  a = fmtp:96 custom = 1280, 768, 3; custom = 1280, 720, 3; custom = 1024, 768, 1; custom = 1024, 576, 2; custom = 800, 600, 1; cif4 = 1; custom = 720, 480, 1; custom = 640, 480, 1; custom = 512, 288, 1; CIF = 1; custom = 352, 240, 1; QCIF = 1; maxbr = 20000
  a = rtpmap:34 H263/90000
  a = fmtp:34 cif4 = 1; CIF = 1; QCIF = 1; maxbr = 20000
  a = rtpmap:31 H261/90000
  a cif fmtp:31 = = 1; QCIF = 1; maxbr = 20000
  a = label: 11
  a = answer: full
  a = content: hand
  a = rtcp-fb: * nack fold
  a = rtcp-fb: * ccm FIR
  a = rtcp-fb: * ccm tmmbr
  a = sendrecv
  m = application 28300 UDP/BFCP
  a = the installer: actpass
  a = confid:1
  a = userid:6
  a = floorid:2 mstrm:12
  a = floorctrl:c - s
  a = connection: new
  m = video 16428 RTP / AVP 97 126 96 34 31
  b = TIAS: 6000000
  a = rtpmap:97 H264/90000
  a = packetization-mode=0;profile-level-id=428016;max-br=5000;max-mbps=108000;max-fs=3840;max-smbps=108000;max-fps=6000;max-rcmd-nalu-size=1474560 fmtp:97
  a = rtpmap:126 H264/90000
  a = packetization-mode=1;profile-level-id=428016;max-br=5000;max-mbps=108000;max-fs=3840;max-smbps=108000;max-fps=6000;max-rcmd-nalu-size=1474560 fmtp:126

  
  a = rtpmap:96 H263-1998/90000
  a = fmtp:96 custom = 1280, 768, 3; custom = 1280, 720, 3; custom = 1024, 768, 1; custom = 1024, 576, 2; custom = 800, 600, 1; cif4 = 1; custom = 720, 480, 1; custom = 640, 480, 1; custom = 512, 288, 1; CIF = 1; custom = 352, 240, 1; QCIF = 1; maxbr = 20000
  a = rtpmap:34 H263/90000
  a = fmtp:34 cif4 = 1; CIF = 1; QCIF = 1; maxbr = 20000
  a = rtpmap:31 H261/90000
  a cif fmtp:31 = = 1; QCIF = 1; maxbr = 20000
  a = label: 12
  a = content: slides
  a = rtcp-fb: * nack fold
  a = rtcp-fb: * ccm FIR
  a = rtcp-fb: * ccm tmmbr
  a = sendrecv
  m = 16430 RTP/AVP 100 application
  a = rtpmap:100 H224/4800
  a = sendrecv
  m = application 29789 UDP/UDT/IX
  a = ixmap:0 ping
  a = ixmap:2 xccp
  |
  ________________________________________________________________________________________________

  Work of appeal with TC 7.1.4
  ________________________________________________________________________________________________

  SIPMSG:
  | INVITE sip: [email protected] / * / SIP/2.0
  Via: SIP/2.0/TCP xx.xxx.60.133:37491; branch = z9hG4bKe3dfed840a299516919a79e4a54cd707.1; rport
  Call ID: 480ec504782c0ad894929e882a696e74
  CSeq: INVITE 100
  Contact: sip: [email protected] / * /; gr = urn: uuid:6 c 856033-4cbd - 5 b 15 - bb13 - 0715c4a694cd, ob>
  From: "201101102_C40_ServiceDesk" sip: [email protected] / * />; tag = 3ab87b1c0d8b4d9d
  To: sip: [email protected] / * />
  Max-Forwards: 70
  Directions: sip:xx.xxx.1.51; lr>
  Allow: INVITE, ACK, CANCEL, BYE, update, INFO, OPTIONS, CONSULT, INFORM
  User-Agent: TANDBERG/520 (TC7.1.4.908e4a9)
  Supported: replaces, timer, 100rel, gruu, way, way out
  Session time-out: 1800
  Content-Type: application/sdp
  Content-Length: 2842
   
  v = 0
  o = xx.xxx.60.133 IN IP4 3 2 tandberg
  s = -.
  c = IN IP4 xx.xxx.60.133
  b = AS:6000
  t = 0 0
  m = audio 16394 RTP/AVP 107 108 109 110 104 105 9 15 18 8 0 101
  b = TIAS: 128000
  a = rtpmap:107 m4as-LATM/90000
  a = fmtp:107 profile-level-id = 25; object = 23; bitrate = 128000
  a = rtpmap:108 m4as-LATM/90000
  a = fmtp:108 profile-level-id = 24; object = 23; bitrate = 64000
  a = rtpmap:109 m4as-LATM/90000
  a = fmtp:109 profile-level-id = 24; object = 23; bitrate = 56000
  a = rtpmap:110 m4as-LATM/90000
  a = fmtp:110 profile-level-id = 24; object = 23; bitrate = 48000
  a = rtpmap:104 G7221/16000
  a bitrate = 32000 fmtp:104 =
  a = rtpmap:105 G7221/16000
  a = fmtp:105 bitrate = 24000
  a = rtpmap:9 G722/8000
  a = rtpmap:15 G728/8000
  a G729/8000 rtpmap:18 =
  a = annex b fmtp:18 = yes
  a = rtpmap:8 PCMA/8000
  a = rtpmap:0 PCMU/8000
  a rtpmap:101 telephone-event/8000 =
  a = fmtp:101 0-15
  a = sendrecv
  m = video 16396 RTP / AVP 97 126 96 34 31
  b = TIAS: 6000000
  a = rtpmap:97 H264/90000
  a = packetization-mode=0;profile-level-id=428016;max-br=5000;max-mbps=245000;max-fs=9000;max-smbps=245000;max-fps=6000;max-rcmd-nalu-size=3456000 fmtp:97
  a = rtpmap:126 H264/90000
  a = packetization-mode=1;profile-level-id=428016;max-br=5000;max-mbps=245000;max-fs=9000;max-smbps=245000;max-fps=6000;max-rcmd-nalu-size=3456000 fmtp:126
  a = rtpmap:96 H263-1998/90000
  a = fmtp:96 custom = 1280, 768, 3; custom = 1280, 720, 3; custom = 1024, 768, 1; custom = 1024, 576, 2; custom = 800, 600, 1; cif4 = 1; custom = 720, 480, 1; custom = 640, 480, 1; custom = 512, 288, 1; CIF = 1; custom = 352, 240, 1; QCIF = 1; maxbr = 20000
  a = rtpmap:34 H263/90000
  a = fmtp:34 cif4 = 1; CIF = 1; QCIF = 1; maxbr = 20000
  a = rtpmap:31 H261/90000
  a cif fmtp:31 = = 1; QCIF = 1; maxbr = 20000
  a = label: 11
  a = answer: full
  a = content: hand
  a = rtcp-fb: * nack fold
  a = rtcp-fb: * ccm FIR
  a = rtcp-fb: * ccm tmmbr
  a = sendrecv
  m = application 29489 UDP/BFCP
  a = the installer: actpass
  a = confid:1
  a = userid:3
  a = floorid:2 mstrm:12
  a = floorctrl:c - s
  a = connection: new
  m = video 16398 RTP / AVP 97 126 96 34 31
  b = TIAS: 6000000
  a = rtpmap:97 H264/90000

  
  a = packetization-mode=0;profile-level-id=428016;max-br=5000;max-mbps=108000;max-fs=3840;max-smbps=108000;max-fps=6000;max-rcmd-nalu-size=1474560 fmtp:97
  a = rtpmap:126 H264/90000
  a = packetization-mode=1;profile-level-id=428016;max-br=5000;max-mbps=108000;max-fs=3840;max-smbps=108000;max-fps=6000;max-rcmd-nalu-size=1474560 fmtp:126
  a = rtpmap:96 H263-1998/90000
  a = fmtp:96 custom = 1280, 768, 3; custom = 1280, 720, 3; custom = 1024, 768, 1; custom = 1024, 576, 2; custom = 800, 600, 1; cif4 = 1; custom = 720, 480, 1; custom = 640, 480, 1; custom = 512, 288, 1; CIF = 1; custom = 352, 240, 1; QCIF = 1; maxbr = 20000
  a = rtpmap:34 H263/90000
  a = fmtp:34 cif4 = 1; CIF = 1; QCIF = 1; maxbr = 20000
  a = rtpmap:31 H261/90000
  a cif fmtp:31 = = 1; QCIF = 1; maxbr = 20000
  a = label: 12
  a = content: slides
  a = rtcp-fb: * nack fold
  a = rtcp-fb: * ccm FIR
  a = rtcp-fb: * ccm tmmbr
  a = sendrecv
  m = 16400 RTP/AVP 100 application
  a = rtpmap:100 H224/4800
  a = sendrecv
  m = application 31127 UDP/UDT/IX
  a = ixmap:0 ping
  a = ixmap:2 xccp

  Another problem, indicated in diagnosis on a MX200 device tests, reporting problems of NTP. I tried to choose another NTP server - but this does not solve the problem, and it works with TC7.1.4. In addition to the time and date is wrong on the screen but OK on the touchscreen device.

  In addition, an error is reported on the OSD settings.

  Do you have advice?

  Thanks for help.
  |

  So, what's the problem? You just showed us an INVITATION. What is the configuration of your system? What is the reaction to INVITE him? We need complete diagnostic logs. Is this VCS - C registred? Where VCS - C diagnostic logs

• the site theme is problem with firefox, but not any problem of chrome with!

  the site theme is problem with firefox, but not any problem of chrome with!
  for ex: http://haftegy.ir
  How to fix?

  Wow sorry! IM update firefox to the latest version and my problem is solved.
  Thank you very much.

• I have an Officejet 4500 printer all-in-one. I have problems with incoming faxes.

  I have an officejet 4500 all-in-one printer.  I have problems with incoming faxes.  It starts to connect, but then prints a sheet indicating image Fax Send report is set to off.  How can I enable this so that I can receive faxes.  Thank you.

  The "image on fax send report is set to off" is just for the image on the fax. This is will you won't fax. Check the connections.

  You should have the telephone line from 1 LINE of fax directly to the WALL SOCKET.
  You should have the phone plugged into the LINE 2 of the fax machine.

  Access your fax on the printer settings.
  Go to the ADVANCED SETTINGS.
  Enable error CORRECTION MODE (ECM) - OFF
  You turn Fax speed to-SLOW

  After that, run your FAX TEST and see the results.

• BlackBerry Z30 incoming calls NOT Ringing - Z30

  Hello

  I recently did a quick reset on my Blackberry Z30 (outfits the two buttons for volume 10 seconds), this fixed my initial problem to experience the shift answering calls.

  When I get calls, now, however there is no ringing sound... I can see the incoming call and I answer the call, but there is no ringing sound.

  I tried to ensure that the volume buttons have turned up full, I even checked my notification settings and made sure that they are on normal. I checked also double the settings on the normal setting, ensure that the volume meter is full.

  Yet even after that, then by restarting the phone several times, still me the same problem.

  Does anyone have the magical answer, I would really advice, because miss me calls because there is no ringing sound.

  sdgardne wrote:
  Hello and welcome to the community!

  Have you tried changing the notification settings, check that and then to change them to what you want? Maybe something is 'stuck '...

  If not, has there been any rush before the event this behavior started? You already described the shift answering calls and restarting with volume keys, but was there something before? A new application? An update of a certain type? Something else?

  Or, if it was always like that? I don't think... and so began to understand what happened just before this behavior is a good first step to try to understand.

  Also, what OS is your device currently running please?

  Let us know.

  Hello

  Thank you for your reply,

  I tried to change the notification setting of 'silent' to 'normal' to see if it helps... but it did not help.

  I have not changed anything in the settings or downloading apps, I even tried to reset some default functionality and he still refuses to make the Bell Rings when someone calls me.

  The current software provides its update: OS Blackberry 10 - version of the 10.3.2.28.36 software

  If you have an idea of what the issue could be just I want to know, I would rather not completely reset my phone like this would be the last resort.

  UPDATED - HIS RING NOW ONCE AGAIN!

  I plugged into my macbook and tried to load in the Blackberry Link software, that the software did not recognize my phone (another new question lol), it's just returned to normal, and now I can hear it ring, thank God!

• Treo 850 screen unlocks with incoming call

  Dear users of Palm,

  I have a Palm treo pro 850. I have a very small problem. The keypad unlocks when the phone rings (incoming call). This creates problems when I come out of my pocket. Sometimes, the call is ignored or received. I hope that some of you have had that probllem and could guide me. Thanks is advance for help.

  There are a few programs that emulate iPhone finger slide to unlock your device. Normally, your leg is unable to do so.

  This page has something of a tour d'horizon of programs for Windows Mobile. Note that not all of these programs will be with the resolution of 320 x 320 of the Treo Pro. I saw a post confirming that at least Sunscape work on the Treo Pro. I have not tried one of those myself (I use a belt case).

  Screen lock-Unlockers, list and details @ PPCGeeks

• Problem with javascript call

  Hi all

  I created a javascript function to show and hide a couple of divs as follows, it worked when I used radio buttons, but I had to exchange them for pictures and nothing happens

  < script type = "text/javascript" >

  function gcg_radio_check (form_type) {}

  If (form_type == 'pro') {}

  document.getElementById("devis").style.display = 'block ';

  document.getElementById("devis_part").style.display = 'none ';

  }

  If (form_type == 'part') {}

  document.getElementById("devis_part").style.display = 'block ';

  document.getElementById("devis").style.display = 'none ';

  }

  }

  < /script >

  I'm calling him but he does nothing... Here is the HTML code. Help, please!

  < a href = "javascript:gcg_radio_check (value); "name ="gcg_formtype"class = 'pro' value = 'pro' > < / a >

  < a href = "javascript:gcg_radio_check (value); "name ="gcg_formtype"class = 'part' value = 'part' > < / a >

  Thank you very much

  Martin

  OK problem solved, it was not recognizing the value, with the following HTML code, it works: -.

  Thank you to those who have watched

• satellite pro a60 problem with game called "call of duty".

  I have a satellite pro a60 with skvideo ati radeon 7000 igp. I have the problem with the game "call of duty" because it is too slow. With my old laptop with ati igp 340 skvideo is not this problem.
  ATI have solved this problem with the new driver, but for this toshiba is not new driver, why?

  Anyone know where I can find 'new post' I did not know where to click to make a new post!

• Problem with video calling

  Dear community of Skype,
  
  These days, I have a weird problem with my Skype. I want to use the video calling option but my video is all messed up. So you can see what is my problem, I have included a screenshot. In the screenshot its my webcam that mess, but when I call a friend its their video that looks like this. I have no idea how to solve this probem and hope you can help. I reinstalled Skype already and installed the latest version but the problem remains. I also tested my webcam with different chat like Facebook video chat programs, but there is no problem.

  I hope that my problem will be solved because I really like using Skype!
  
  PS I apologize for some grammar mistakes. English is not my native language

  

  What is the name/model of your version of map and graphics driver?

  If your graphics card is nVidia, then see this:

  http://community.Skype.com/T5/video-on-Windows/video-reception-not-right/m-p/1447456#M11141

  http://community.Skype.com/T5/Windows-desktop-client/webcam-problem/m-p/1515620/highlight/true#M1289...

• BlackBerry Q5 incoming calls not working - help

  I bought a bb Q5 and I'm not reciveing my incomming calls, I referred to bb and they sent me a new phone... and the same thing is happening, I can make calls, text etc, but my incomming calls does not connect and go straigt to the v/m.. everything is puzzled... Help

  I thought about it, I had my block of data with Fido, because I do not use it
  so they block when using the Pocket, we have unlocked it and worked

• Problem with the camera as being incompatible with Windows 7 driver

  Hi all
  I have a problem with my Logitech camera - Logitech QuickCam communicate, actually.  Just don't/do not upgrade to Windows 7 in 64-bit mode.
  Any suggestions on how to fix? I'm a little bit ticked off without going through the camera work

  Logitech has not published nay drivers for windows 7.

  http://Logitech-en-AMR.custhelp.com/cgi-bin/logitech_en_amr.cfg/php/enduser/std_adp.php?p_faqid=13985

  Logitech has released software updates for many of their devices.  Communicate Deluxe, Communicate STX and communicate the MP are listed as being supported in Windows 7.  Want to know if your hardware current & software will work with Windows 7? Click on these links: *Windows 7 Upgrade Advisor * *Windows 7 Compatibility Center*.

• Is there a problem with firefox does not, it's happening on all our computers at work and at home. It takes about 10 seconds, then stops responding.

  I read FF posts of the community, and it seems to be a problem with a lot of ppl. It happened for about 3 days now on all our computers at home and work. This cannot just be linked to a computer if this happens for many. I was wondering if there is a general problem with FF, is that what is happening for many users. When I start FF I am lucky to get 10 sec before it does more, ready to give FF film! I use it in safe mode now & use of IE next until I find another solution other than resetting FF. FF should maybe see if there is a problem at their end, & then show us how to fix it.

  To return to regard to extensions, you can view and update the extensions on page modules. Either:

  • CTRL + SHIFT + a
  • Firefox orange (or the Tools menu) button > Add ons

  In the left column, click Extensions. Click the "gear" above the list, and then use the check for updates.

  You can also disable non-essential or unrecognized extensions (or so obviously not good, remove them).

  Typically, a link will appear above at least an extension disabled/removed to restart Firefox. You can complete your work on the tab and click one of the links in the last step.

  Any improvement?