Problems with LAN RJ45 Ethernet on Tecra A8 PTA83E link

Similar Questions

• I have the ie3sh.exe problem on my laptop, can you tell me what I have to do and this causes a problem with LAN for internet

  I have the ie3sh.exe problem on my laptop, can you tell me what I need to do, and this causes a problem with LAN to the internet.  What happens on another laptop not this one.

  Hello

  ·        Which is exactly the problem that you face with iesh3.exe?

  ·        When you receive the error message that is related to iesh3.exe?

  ·        You did changes to the computer before the show?

  ·        This issue you are facing with internet?

  ·        What is the full error message that you receive?

  Method 1: I suggest you to run the Microsoft safety scanner to ensure that the system is free of infection by the virus:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Method 2:  I would say as you put the computer to boot and check which application is causing the problem:

  http://support.Microsoft.com/kb/929135

  Note: after a repair, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Post back with the required information so that we can help you further.

• Strange problem with LAN on Satellite P10 connection

  Since yesterday I get really annoying balloon popup (it appears at intervals a decade or less seconds:(qui dit: câble débranché, mais le réseau fonctionne très bien (avec quelques retards quand il montre)))
  I wonder is this a hardware in my laptop problem or a problem with the internet provider. I have Realtek RTL8139/810 x LAN card. I checked another cable and of the ToolTip always shows :(
  Help, please

  Post edited by: motomadness

  Hello Adam

  On this path, it is not easy to say anything. I recommend you test somewhere else to make sure if this problem occurs due to material.

• Problem with update of Intel for Intel (R) Wifi Link 5100 AGN driver

  Hello

  I have Windows Vista, Office 2007, and when I download the update recommended above makes my Internet become very reliable. Some Web pages is not affected, but some will not work. There is no obvious reason why this is the case for all advice would be greatly appreciated.

  Thank you very much

  Paul

  Hello

  You tell us where you found the recommended update.

  ________________________________________________________

  FYI for Windows updates:

  Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update'

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or show an update of Windows Vista"

  http://www.Vistax64.com/tutorials/72491-Windows-Update.html

   

  Here's how to chanage update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

  See you soon.

• problem with the locking insert and delete between two linked tables help please.

  Hi guys I have a problem with a table of locking in Oracle forms, but when I try in SQL happens here too many users. I was wondering if anyone can shed some light on this?
  
  I created two scenerios one that works and is not based on the primary key and foreign key constraints (but one that works is not possible for us because it would mean change design table that we can not do).
  
  I've hardcoded in 1127,1128 number to make it easier (in reality it is a sequence)
  
  OK scenerio one (our scenerio)
  
  two tables
  

   CREATE TABLE testSFLABPR 
     (     LABP_REF_IRN VARCHAR2(25 BYTE), 
       LABP_REF_REF VARCHAR2(30 BYTE), 
       LABP_REF_SL NUMBER(8,0), 
       LABP_CONFIG_ID NUMBER(8,0),
        CONSTRAINT PK_testLABPR_IRN_SL PRIMARY KEY (LABP_REF_IRN,LABP_REF_SL)
     ) ;
  
   CREATE TABLE testSFLABP 
     (     LABP_IRN VARCHAR2(25 BYTE), 
       LABP_OPNO NUMBER(3,0), 
       labp_no NUMBER(8,0),
        CONSTRAINT PK_testSFLABP PRIMARY KEY (LABP_IRN, LABP_OPNO, LABP_NO) ENABLE, 
        CONSTRAINT testFK_SFLABP_SFLABPR FOREIGN KEY (LABP_IRN,labp_no)
         REFERENCES TESTSFLABPR (LABP_REF_IRN,LABP_REF_SL) ENABLE
     ) ;

  OK now session is done the following
  

  DELETE FROM      testSFLABPR     WHERE   LABP_CONFIG_ID            = 1127;          
                 
  INSERT INTO testSFLABPR(
          LABP_REF_IRN,
          LABP_REF_SL,
          LABP_REF_REF,
          LABP_CONFIG_ID
          )
          VALUES
          (
          'SOPENSHELVING',
          1127,
          1127||'CF Route',
          1127
          );
          
  INSERT INTO testSFLABP
        (
        LABP_IRN,
        LABP_OPNO,
        LABP_NO)
  VALUES (
  'SOPENSHELVING',
  1,
  1127);

  session one remains in this State.
  
  second session now does the following

  DELETE     FROM testSFLABPR     WHERE   LABP_CONFIG_ID            = 1128;     

  second session is now locked until a commit or rollback occurs.
  
  If I run the exact scenerio even with only a primary key on the table without locks held
  

   CREATE TABLE testSFLABPR 
     (     LABP_REF_IRN VARCHAR2(25 BYTE), 
       LABP_REF_REF VARCHAR2(30 BYTE), 
       LABP_CONFIG_ID NUMBER(8,0),
        CONSTRAINT PK_testLABPR_IRN_SL PRIMARY KEY (LABP_REF_IRN)
     ) ;
  
   CREATE TABLE testSFLABP 
     (     LABP_IRN VARCHAR2(25 BYTE), 
       LABP_OPNO NUMBER(3,0), 
       labp_no NUMBER(8,0),
        CONSTRAINT PK_testSFLABP PRIMARY KEY (LABP_IRN, LABP_OPNO, LABP_NO) ENABLE, 
        CONSTRAINT testFK_SFLABP_SFLABPR FOREIGN KEY (LABP_IRN)
         REFERENCES TESTSFLABPR (LABP_REF_IRN) ENABLE
     ) ;

  INSERT INTO testSFLABPR(
          LABP_REF_IRN,
          LABP_REF_REF,
          LABP_CONFIG_ID
          )
          VALUES
          (
          'SOPENSHELVING',
          1127||'CF Route',
          1127
          );
          
  INSERT INTO testSFLABP
        (
        LABP_IRN,
        LABP_OPNO,
        LABP_NO)
  VALUES (
  'SOPENSHELVING',
  1,
  1127);

  DELETE     FROM testSFLABPR     WHERE   LABP_CONFIG_ID            = 1128;

  I hope I posted all the information that is relevant... version of DB were is Oracle Database 10g Release 10.2.0.3.0 - Production
  
  Any help is appreciated...

  Creating indexes on columns of the FK. Something like:

  CREATE INDEX testFK_SFLABP_SFLABPR_IDX
  ON testSFLABP(LABP_IRN,labp_no)
  /
  

  SY.

• Problem with LAN Express airport

  Hello

  I recently bought an Apple AirPort Express router and I have several problems using the Ethernet with the most active airport. The thing is with my old router, I could have been connected to the ethernet cable, while at the same time connected with a LAN cable to my Macbook (end of 2015). The old router would have generated a wifi connection, but at the same time, would have enabled internet connection by cable to my Macbook without the active WiFi. People could use WiFi at home, but the Macbook would be connected to the internet by cable (lan cable connected to the router)

  My question is how to turn on a cable connection on my Macbook using the AirPort Express LAN cable, while at the same time, keep WiFi active. Currently, I have the ethernet cable connected to the airport and cable Lan also connected to the airport and the Macbook, but the internet will not work unless the WiFi is active. I would like to turn off the WiFi on the Macbook and always have an internet connection through the LAN cable that is connected between the AirPort Express device and Macbook.

  Thank you

  My question is how to turn on a cable connection on my Macbook using the AirPort Express LAN cable, while at the same time, keep WiFi active.

  Is the Terminal AirPort Express the only router in the current configuration of your network? No matter, what is the brand and model of the modem Internet you have the Express directly connected by Ethernet? ... or is the Express connected by Wi - Fi to the modem?

• Satellite Pro C850 - strange problem with LAN connection

  Hello world

  I just signed up on this forum because I hope you guys can help me with a really strange problem.

  I recently bought a Satellite Pro C850-1MX
  It came with Win8, but given that I don't really like Win8, I bought an additional Windows 7 Pro (64 bit) license and installed on the laptop.

  The problem I describe, also arrived on 8 to win, which makes it even more strange.

  As soon as I connect a cable to the RJ-45 port, Windows tells me, that the LAN connection is not connected.
  As soon as I unplug the cable, Windows starts looking for a network and actually found one!

  So, the only way to connect to my LAN cable is... I have activate the LAN connection, wait that it detects a network (without the cable connected!) and meanwhile to connect the cable to the network port.
  Now... If I disconnect the cable once again, Windows still shows its connected.

  I must say, that I am a Director of professional network for more than 10 years now, so I should know my systems, but this never happened to me before. Event log shows nothing, re-installing drivers did nothing either. IM quite confused here and I hope you guys can help me.

  Thanks for reading, and let me know if you need any additional info!

  Greetings from the Germany,
  Sandro

  Hello Sandro,

  To be honest I confused m.

  I would try to start talking about the drivers installed, since you changed the system for Win 7.
  All the network devices, such as card WLan and LAN card are properly recognized in Device Manager?

  As I m not wrong not the laptop was equipped with a network card Realtek-8111F (1000BASE-T/100Base-TX/10Base-T) and WLan RTL8723AE Realtek b/g/n card.
  If both should appear in the device properly Manager if you have installed the drivers correctly.

  2nd question:
  You said:
  > As soon as I unplug the cable, Windows starts looking for a network and actually found one!
  Are you sure that you speak of LAN and WLAN?
  For me it made no further since. If the network cable is unplugged, the notebook would connect to the WLan where WiFi is enabled.

• Problems with USB pnp devices series Tecra

  Hello
  I have a lot of problems to install usb flash drives as pnp devices. It should install automatically as it did on my desktop and other mobile colleagues.

  I am running xp professional and all that happens is the found new hardware wizard appears, and fails to install. I tried to update the BIOS and Chipset with downloads from this site but nothing works. I ran the diagnostics and the usb drivers and features are ok.

  Any help would be appreciated.

  Hello

  Everything you wrote is really mysterious. It will be interesting to know what model Tecra you have exactly, and this occurs when you install the operating system using recovery DVDs delivered.

  I can't really imagine that this issue occurred all of a sudden.

• Problem with Wifi and Ethernet

  My laptop is Aspire E1 - 570G. After the update to Windows 10 my laptop says Limited/Restricted each time when I want to use the Wi - Fi or LAN cable. Help, please.

  Ok.

  can you post your Lan Ethernet adapter model?

  key of the Windows logo + x

  Device Manager

  Click the network card

  then with the ethernet cable is connected, right-click on the icon with a yellow triangle next to clock and date, choose 'open network... '. »

  on the next window, click "ethernet", then click on 'details', take a screenshot and send me a private message to this screenshot.

• HP Envy 17-k207na: problem with lan port even when installation of official drivers...

  I downloaded the driver from Realtek LAN (LAN) fromthis site and always when plug you my cable to the pc it says limited conectivit that I tried on another pc with cable it works internet. -.-

  Hello:

  Try the driver directly from Realtek.  a 4th on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

• Problem with LAN wireless

  
  

  I finally solved my problem. This is the encryption. The Linksys router was set to WAP encryption, but the laptop did not know that. I happened to change this setting on the laptop myself using the ThinkVantage Access Connections program, which included a copy of the encryption key manually. Now the wireless connection from the laptop to the router works great.

  There are always two things which surprise me. One is why wireless OK when I first set up the local network in December. The only explanation I can think is that I put it to ignore encryption, but I shouldn't do that for security reasons. Then for some reason any Setup stopped working a few months later.

  Another puzzle is why encryption was not configured automatically by the Linksys Web Connect program supplied with the router. I used it several times and, after a long wait, he always asks an alternative connection for configuration, cable, or a removable disk. That should have been a sure way to put in place encryption, but it never did.

  All that I can say now is: Phew!

• Serious problem with my RADEON MOBILITY on TECRA A5

  Hello

  Yesterday windows restarted after an error caused by ATI RADEON MOBILITY recovery and now I have some graphic problems on my screen, I'm looking for the latest driver for my RADEON MOBILITY X 600 but when I tried to install it from the ATI site, it has not been accepted by my computer

  Can you help me solve the my problem please?
  Excuse my bad English...
  Thank you

  Hello Rasta

  As you can see that you can not install ATI driver. Please don t he understood as a problem or something unusual. This is normal and the way the material is protected. Please use driver Toshiba designed. He won't force the graphics card on the limit and avoid overheating.

  I recommend you remove preinstalled driver and install Toshiba one. This driver has been tested and works correctly. If you n t it have you will find everything you need on Toshiba download page.

  Good bye

• problem with LAN drivers

  i start my computer, I have reinstall the network drivers because he says network adapter problem. Please help me

  Hi Isabelle,.

  I understand that the network drivers works every time you restart your computer. Do not worry, we will try to solve this problem.

  Please provide us some information to refine the question:

  1. What is the brand and model of your computer?
  2. You did it changes on your computer before the show?

  I suggest that you put your computer on start-up in minimal mode and then install the last card network from the manufacturer's website and check if the problem persists.

  Perform a clean boot

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, refer to the section «How to reset the computer to start normally after a boot minimum troubleshooting»

  If the problem persists, I suggest you to follow the steps in the article below on how to solve the problems of network card.

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows/fix-network-adapter-problems#1TC=Windows-7

  Hope this information is useful. Please let us know if you need more help, we will be happy to help you.

• Problem with LAN adoption of Windows 7 Ultimate

  I have laptop HP PROBOOK 445 G1 and I installed Window7 ultimate OS and network found problem.so please suggest how this will work fine.

  Hello Ravi,

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1. you receive a code or a network adapter message?

  2. have you installed latest drivers network on your computer?

  It is possible that the network drivers are not installed on your computer.

  To find if there is an error code in the network adapter properties, please follow this link.
  Error codes in the Device Manager in Windows
  http://support.Microsoft.com/kb/310123

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the network troubleshooting and check the issue.
  See this link:
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  If this does not help, then use method 2.

  Method 2:
  Please use the suggestions provided in this Microsoft support article and check.
  Reference:
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  In addition, please download and install the latest network drivers from this link.
  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=5359422&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswEnvOID%253D4059%257CswLang%253D%257Caction%253DlistDriver&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Additional information:
  How can I troubleshoot network card?
  http://Windows.Microsoft.com/en-GB/Windows/fix-network-adapter-problems#1TC=Windows-7

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Someone else's problem with the Web page jump when hovering the links with long URLS in Firefox 4 beta 12?

  When I hover over a link with a URL that is longer than what corresponds to the length of the status bar in Firefox 4 beta 12, the entire page jumps back until I stop hovering over the link. It was so annoying (especially on Google search pages with lots of links, etc.) In fact, I uninstalled Firefox 4 Beta 12 and returned to the release of the Beta 11.

  Is there anything in all: config which would disable the status bar that the URL link seen in, at least?

  Download the extension of evar 4 status bar. It solves this problem and also provides many other options of the bar of the addon. Here is the link: https://addons.mozilla.org/en-US/firefox/addon/status-4-evar/