Problems with mail after switching to macOS Sierra

Similar Questions

• Problems with mail after upgrade

  After the update from El Capitan with macOS Sierra my e-mail program does not stay open longer than 3 seconds. I have an end 2013 27 "iMac 3.5 GHz Intel Core i7 with 32 GB of memory.

  Is there any solution for this or am I the only one having this problem?

  Thank you

  Bob

  Test in a new user quickly will tell you if the problem is system-wide or if your user folder that contains the problem.

  You can use the guest user or create a new user to test.

  CREATE A NEW USER

  Go to system-> Preferences, create a new user in users and groups.

  Switch to the new user by logging incoming/outgoing or use the fast user switching.

  You can skip connect with an Apple ID, unless you need to test apps to iCloud. Hit continue and then jump.

  By default only the applications Apple will be in the dock in the new user. Go to Applications to open other apps, that you can test.

  You still see the issue?

  If Yes, then the problem is with your core files.

  If not, then the problem is in your user folder.

• After switching to macOS Sierra MacBook Pro MASSIVE battery drain

  I have a MacBook Pro of the retina (end 2012) now under macOS Sierra and my battery is to be wiped out at a crazy pace of knots.

  I used to be able to go out with my MBP without a power cord and have at least 6-7 hours of use and I run Parallels desktop as well, so when I went out Saturday and got less than 2 hours, I was just a little worried.

  I've done just about everything which has been mentioned in conjunction with this issue, including, starting in safemode, NV and PR RAM reset, reset the hardware controller etc, etc nothing works.

  Someone at - it any other suggestions, or is this just a waiting game for an update of Apple's Sierra?

  Expect indexing to complete.  Then see if it goes back to normal.

• after upgrade to macOS sierra cannot connect to citrix receiver apps

  I use Citrix receiver apps to make my day to day work. The same citrix apps are also accessible via a web browser (Safari) and everything worked fine until the version IE Capitan.

  After upgrade to macOS sierra I can't you connect/launch of citrix apps. I tried with receiver and citrix via web browser as well, but its not connecting.

  Is anyone else facing the same issue or know the fix.

  Earlier, I thought that maybe some problem of connectivity, but after a lot of troubleshooting it still did not work and shows the same error "failed to initialize." (attached image).

  Then clicked on suddenly to mind that I just upgraded my MacBook OS. In order to confirm if his new problem of macOS or anything else, I have installed Windows 10 on vmware fusion and tried to connect to citrix receiver and it worked only! without any operation of additional troubleshooting, it is confirmed that the issue is again macOS.

  So as a temporary workaround, you can use virtual windows OS on top of the operating system Mac OS page sierra to launch citrix applications.

  But apple needs to fix in the Sierra.

  This seems to be, in part, a browser problem.

  Have you tried, since El Capitan or Sierra, another browser?

  And it would move from Citrix to make their applications compatible with OSX.

• seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?

  seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?

  The 'list' of relevant articles that I know, they are now

  -You can read about the problems in the present statutes and possibly find workaround solutions, particularly in the last

  If you are unable to activate your iPhone, iPad or iPod touch after installing an update - Apple Support

  Apple iOS suspension 9.3 updates for older devices, work on activation fix | IVous

  Apple launches new version of iOS for iPad users 9.3 2 affected by bricking bug | 9to5Mac

  GSM of unfixed addresses Apple iPad 2 Bug with revised Activation iOS 9.3, but the larger question remains - Mac rumors

  If you are unable to activate your iPad 2 (GSM model) update to iOS 9.3 - Apple Support

  9.3 iOS update issues

  Leave a post by: ChitlinsCC

• Problems with WiFi after put 10.11.2 up-to-date.

  Mid 2011 iMac.  Problems with WiFi after put 10.11.2 up-to-date.  No associated network.  Everything was fine before the update. All the pre 10.11.2 device works fine.  Anyone else having issues?  I have to disconnect and reconnect manually.  WiFi drops every 5 to 10 minutes.  Nothing has changed on the machine something of the update.

  Please do not comment on the age of the system.  Achieve a Mid 2011 arrived at a possible replacement point.  I have many other new Mac at home.  The Mid 2011 is spec'd with 16 GB of RAM, i7 and SSD.  It's always very fast.

  Thank you in advance for the answer...

  Hi Captainsniz

  There are a few things to try. Keep doing this until the problem disappears.

  First of all, if you have not already, shut down the computer completely, wait about 1 minute, then restart.

  Disconnect the wifi network either via system preferences, either by pressing the "Option" key and clicking on the wifi menu bar icon.

  Reset the DHCP lease by going to system preferences > network and show Advanced Options, and then click the button to "Renew the DHCP lease" TCP/IP tab.

  You can delete the wifi network of system preferences > network > network name... then close system preferences. Then reopen and add the network in.

  You can also restart your wifi router, it erases the old connections. Most of the routers you just turn off and wait a few minutes, then restart. You can also reset your ISP modem if you have a.

  Finally, you can try to reset the PRAM and SMC on your Mac. I'll get this info here on Apple Support KBs for your particular Mac.

  Be sure to back up your computer.

  Hope this helps, Greg

• Problems with mail imap after upgrade of Sierra

  After the upgrade to Sierra, I can't sync my hotmail account in Mail.

  Before even the upgrade, I always had to change my account after each restart settings, as required for authentication SMTP and IMAP user name has been deleted. The same thing happens after the upgrade, but now when I enter the user name and press save I have error message say: A IMAP account already exists.  Only one IMAP account is allowed to be saved.

  Reming the account and recreate it does not help because I find myself in the same situation where the username is missing. Does anyone have any suggestions?

  

  The username field must my work email address and when I enter it and press on save, the error message comes.

  I am facing a problem as well with Mail on macOS Sierra: account sync not IMAP.

  I see that there are a lot of similar questions autour... hope they will fix soon!

  Even that when troubleshooting your...

• Problems with mail (Hotmail) and research after LogMeIn Rescue support

  After spending $200 for a technical support Win Mail is totally screwed up. mail is in alphabetical order, beginning with W and it lists all messages in anything with O, etc.  Do not "as received".

  My list of email contacts has been lost.

  I can and use Google with Norton Safe Search using Hotmail in Outlook, but still no list of contacts

  Also when searching for Ebay or other sites using Google search of content, it can take minuets to load, the symbol at the top of the file a few laps. When watching / listening it constantly stops to recharge, breaking continunity

  Why/how Log Me In Rescue me, charge me $200 and do a mediocre job?

  Original title: $200 for nothing?

  As in windows live mail, windows update still offers some e-mail software, but its outdated habit.

  even install it... 1, if you use the norton software, windows software that is installed by default, will cause

  compatibility problems. Norton has probably a firewall, just like vista, disable one, in addition, Defender

  power/probably has the same problem with norton. Go with norton antivirus, turn off the rest.

  Once set, turn on youre web browser access to internet/firewall exceptions. Then, change the internet options,

  Set all by default, set mail/home page, in the Advanced tab, set the Advanced Settings button.

  For outlook, go to: http://www.msn.com

  Look in part L.upper of the page for outlook...

• Can I switch to macOS Sierra with early 2008 iMac running El Capitan 10.11.6?

  Can I upgrade to macOS Sierra on an iMac in early 2008 running El Capitan 10.11.6?

  Nope

  MacOS Sierra - technical specifications

• Problems with scrolling after update

  IM currently using the BlueJ ide and after updating to the new system / update (macOS Sierra) there is significant lag / jitter when scrolling. This problem only occurs when you use the scrolling with two fingers with the touch pad. When I use a mouse / or click the scroll bar on the side, it seems to go well. Not sure if there is a problem with BlueJ or the new OS. Would be very interested for some suggestions on how to fix this very annoying problem. (Using a Macbook pro 13, 2015).

  Thanks a lot to all the answers

  The obvious question would be if you see the problem of scrolling in Mac OS standard applications such as Mail, Notes and Safari.

  If this isn't the case, it is likely BlueJ.

• MacBook Pro crashed after update to macOS Sierra

  After I tried to update my MacBook Pro for macOS Sierra, this screen came:

  In case you can't read it, it says "apple.com/support-1007F'.

  After restart my MacBook Pro, he asked for my Wi - Fi connection information, so I typed in it and it showed a loading bar. Then came to this screen:

  

  I didn't know which option to choose, what is called Apple Care to help make a choice. They said to choose 'Reinstall OS X' so I did. Then my screen says something like "click and drag to the browser that you want to download in" but nothing has popped up.

  I don't know what is happening with my computer. Hard drive failure? This update was not the largest update so I don't know why all this is happening.

  If you have any ideas or solutions, please respond! That would be incredible!

  Thank you guys!

  It seems that your Mac can not find the system disk. It seems that the drive has failed and your Mac is now in recovery mode.

• Ongoing problems with mail

  I had this problem since, I believe, Mavericks. I don't think that I had the problem with Snow Leopard.

  I use the classic layout in Mail.  This problem is to click on a message to read the email. New content look a popup appears generally, which is a duplicate of the message content area. It will usually take the whole screen, blocking my view of the list of e-mail. It does not occur with every email and is very irritating when this happens, which is most of the time. I don't see anything in the menus to stop this behavior.

  I do not believe that this outlook. I think now to switch to Outlook, because I'm tired to happen.

  Is it possible to stop the content of the popup display screens e-mail? Thank you

  Emails are opened in windows separated only if you doublecklick on them. To display it in the window of Mail, simply select an e-mail in the preview window.

  Even if you open an email in a separate window, you can change its size by dragging on the edges of the window. The next email will then open in the same window size and in the same place on your screen.

• Problem with mail from a Time Machine backup

  Hello

  After I restored my wife with Time Machine MBP, it tried to start "Mail" and she gets a message:

  «Mail must import your messages (etc.)...» »

  So when I click on 'continue' it shows a # 52 847 ridiculously high message and he gets up to 981 photos and videos, then she stays there for hours. If I cancel, next time I try, it happens to 980, then next time 979 and so on, leaving fall 1 number every time and it hangs still for hours, until I turn it off.

  If I try to restore messaging of the backup, I get a message:

  "Mail can not be changed or deleted because it is required by Mac OS x."

  So essentially, she cannot open her e-mail software.

  What can I do to get the operational e-mail program?

  Well, problem solved.

  I did a reinstall TM on a backup earlier and got the same result with mail, so I just him to run the import as long as she could.

  Problem disappeared.

  Thanks in any case

• x 200 tablet, still have problems with smartaudio after driver conexant last updated.

  where the devil file complaint or tech support, whenever I call it, there are people who do not know jack whatever it is.

  I had an x 200 tablet, was seen problem with the beams stupid mistake that keep popping up.  then I updated my drivers conexant coming out who was supposed to address this problem. But it doesn't, it creates more problem.

  Now whenever it starts, an error with smartaudio.   so, it leaves me with 2 choices, or I used the former driver who does not mistake smartaudio. but the beam forming erro. or I use the new driver that will give me the error smartaudio.

  anyone has the solution let me know please.

  running, updated vista business sp2.  and Yes, I've updated all the drivers that I find unnecessary and causes more problems for me.  as the update of the thinkvantage system that made it useless until I have some file and add vista business sp2 in it.

  Yay what's up, I answer to my own problem tech.  I hope this can help some of you.  CUS we are ourselves since lenovo cannot help us with our problems. they should just all the fire so that they can sell their products cheaper. for the ppl who work there are unnecessary.

  "OK for people with the beam forming the problem, just go to c:\program Conexant delete folder there, it's to say" TOMY.

  reason for this is because it won't let you delete the folder of conexant all at once.  and remove it to ensure that the new drivers to install correctly.

  After that, simply download and install the latest drivers from the website of lenovo conexant.   Now you should get only the smartaudio error when you switch to Tablet mode or laptop.

  just go to the c:\program files\CONEXANT\SAII directory, rename the smartaudio and SAIIcpl to something else.  I just added a _ in front of her.  This way, whenever you change the mode it will not create the smartaudio error. and you can rename it back later if you wish, or if someone comes up with a better solution

  now, you might ask, how can we change the parameters for the smartaudio.

  If you really want to set that just go to c:\swtools\drivers\audioc\smaudio\smaudio, there is an icon that is smaudio.exe you can double click and run it to change the settings.

  After that, you should not get the beam forming or smartaudio error.

  Lenovo has probably screwed up on some instructions, which does not run programs properly maybe that happens to people with vista sp2?

  CUS, I noticed that when I upgraded to sp2, the thinkvantage system update will not work until we edit some file and add vista sp2 in it.  You can search the solution on this forum if you have this problem.

  Thanks and good luck

  just need to do an update, while this method a bit worked, sometimes when I start I always get the beam forming the error.  It's just that it does more every time I switch between Tablet and computer laptop mode, which is better than nothing for now.

• Problems with WIFI after sleep-wake up.

  -Wifi does not randomly after coming out of sleep.
  -Sometimes it can see the network with at least 2-3 bars, but does not connect and the Troubleshooting Wizard offers no help.
  -wifi only way to recover is to uninstall the wifi adapter driver in Device Manager and then reinstall it, and then it works fine.
  -This problem only occurs when I am a little close to the edge (still a lot within wifi range) of the router. otherwise, IE very close to router, there is no problem at all.
  n ' has not had any problems with windows 7 at first, but wifi problems randomly started upward. uninstalled the 2-3 most recent programs with Revo Uninstaller.

  Notes: thinkpad x 61 Tablet, fresh running windows 7 (not upgraded), card express 11 a/b/g wireless lan mini pci, router is an apple Airport extreme from 40 feet away with WPA2-Personal Security.

  Hey art vandelay.

  Welcome to the Microsoft Answers community.

  I suggest you try the methods one by one and check below.

  Method 1:  Uncheck allow the computer to turn off this device to save power option in Device Manager and check.

  1: click on start, go to control panel. In Control Panel, click small icons to DISPLAY.
  2: find the network and sharing Center and open it.
  3: on the left side, you will see an option that says "change the map settings. Open it
  4: you'll be there, two local and wireless connections. Right-click on WIRELESS one, and then select Properties.
  5: now, click on CONFIGURE.
  6: you will see 5 tabs, click on the last one that says "power management."
  7: now simply UNCHECK the first box that says "allow the computer to turn off this device to save power".

  Method 2: Perform the cycle of power modem/router.

  (1) turn off the power to the modem (unplug). If there is the router turn off the power (unplug).
  (2) unplug the Ethernet cable that connects the modem to the back of the computer or router on the back of the computer. Disconnect at the end of the computer. If there is a router, follow the same steps, disconnect at the end of the computer.
  (3) shuts down the computer (not restart).
  (4) wait at least 4 minutes.
  (5) switch on the modem. If there is a router enable the router as well. Wait for the lights on the modem\router to stabilize.
  (6) connect the Ethernet cable to the computer.
  (7) turn on the computer. Now, try to connect to the internet.

  Method 3: The restore of the system on your computer.

  System Restore will take your computer state permeable when it did not face such a problem, this can be done by selecting the correct restore point.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click on choose a different restore point and then click Next.
  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next.
  4. click on finish.

  For more information visit http://support.microsoft.com/kb/936212/

  You can also try methods provided in the article.
  http://support.Microsoft.com/kb/928152

  Hope this information is useful.
  Let me know if it worked.

  Thank you, and in what concerns:
  Umesh P - Microsoft Support