Problems with my new HP Pavilion p7-1449

I bought the computer a little over 4 months ago and have had nothing else with her problems.  For the first 2 months it was freezing, I could finally send to HP and the hard drive and motherboard have been replaced.  When I got to the back of the computer I noticed the HP Games were no longer on the computer.

The computer began to send me blank pages and IE stopped working messages.  After having tried Firefox, I had 400 internal Service error messages.  The computer is returned to HP 3 times more and it continues to give me blank pages and removes even the additional e-mail messages.  I use Yahoo and when I click on a trash can next to the message that I want to delete, it often takes one underneath, as well as that I am trying to remove.

I did a system restore and re-installed all the drivers and Windows updates, etc.  Moreover, it did not back the games that the case manager, the service Tech and even a Geek Squad (Best Buy) agent said he would do.

Any ideas?  I really think that other software is not respected when they replaced the hard drive and the motherboard.  HP and Best Buy says it tests fine.  I recorded video all the strange things done this computer.

In fact, it is for all versions of Windows XP and later versions (XP, Vista, 7 and 8). It is not a necessity, but just something to try if you want.

Tags: HP Desktops

Similar Questions

  • Problem with my new HP Pavilion TS 23-F202IN

    I don't know what the right forum? I checked that this reading All in One is only printers or also for all in a desktop PC?

    I just unboxed it today and now the first problem I faced...

    The keyboard and the wireless mouse do not connected possible fault in the USB receiver that displays no lights when it is connected to the computer... I tried to connect to all the PORTs and the receiver receives no LED light on it so is not conenct to the mouse and the keyboard, even if I keep the button connect, supported on the mouse and the keyboard. The mouse lights are turned on but it does not sync with my PC... I tried to call the HP support center here in INDIA that is not 24 hours, even if they announce it comes 24 hours support... no one answered it because their working time is from 09:00 to 18:00 so sick!

    Then I went to the HP site and followed the link to support that asked me my HP product number and serial number and then there was a link to cat technical support when I went through the cat asked the Executive he tried to solve problems and then when there probly came to a conclusion when he said he would send me a new mouse and receiver it asked me my address at the hearing, I am of the India he said that he will transfer the Chat to an Indian executive support, who came to ask me the same questions, then he told me it is a consumer product, so I need to talk to voice Support team and I could not help on the CHAT! How irritating is that... I have a printer HP ever made a problem with it... and this system has a value of 64 990 /-INR which isn't a small amount and it is the kind according to the sale, I get...

    Is he one of the support here for the response team and address this issue?

    There is also a cat Hillarious records I have if someone wants to read... I'll upload the picturesque images my serial number and address.


    Im a developer of Windows applications

    OK after almost 10 calls back to the HP Helpline, Station of Service HP, HP support line... Finally, I got a new keyboard, mouse and Receiver USB keyboard doenst look alike as it came with my system then obviously, it's just another keyboard HP wireless which is brought... they were just trying to buy time by saying that the keyboard is not available and other stuffs... slightly bad experience but finally the problem was solved...

    My only comments to HP India support would be

    (1) CHECK THE QUALITY OF THE PRODUCT THAT YOU SHIP BEFORE YOU SHIP TO THE CUSTOMER)
    (2) if one of the devices are dead on arrival, take the question on a priority support and fix before 48 hours.
    (3) notify your tracking service center and update the client on their case instead of them calling you 10 times.

    Thank you.

  • 2 problems with a new operating system installed

    Hello. I had a problem with my new istalled windows XP. I can't use text fields in IE and system restore (description of control point). There are also 2 opened with items in the context menu of files. What to do

    Hello Alpha,

    You must have windows media player to integrate its function in your browser. And to open it with windows. You will need to Open regedit. Then navigate to HKEY Classes root.
    Find the file extension that gives you these open wrong with programs, and you should find OpenWith list and many others. If you do not find it open with list here so watch the file type and scroll down and find the type of file name and search for.

    -Alex

    EDIT: actually, here's a list of locations to search:

    HKEY_CURRENT_USER-Software-Microsoft-Windows-CurrentVersion------Explorer------FileExts------.xyz------OpenWithList

    HKEY_CURRENT_USER-Software-Microsoft-Windows-CurrentVersion------Explorer------FileExts------.xyz------OpenWithProgIDs

    HKEY_CLASSES_ROOT\.xyz\ OpenWithList

    HKEY_CLASSES_ROOT\.xyz\ OpenWithProgIDs

    HKEY_CLASSES_ROOT\SystemFileAssociations\\OpenWithList

  • Fuze causes problems with the new Gigabyte mb

    I know this may sound weird, but with assistance from others and a lot of time to put into it, I found that the "rocket" poses problem with my new motherboard Gigabyte EP45-UD3R.

    I was getting problems strange behaviors and reboot, flaky stuff.  Once I reduced to my USB devices I then reduces it to the "rocket".

    Anyone know anything about this at all?

    I would have given this another day before posting.  But I have the answer and it will go here.

    In the BIOS with the EP45-UD3R (Gigabyte is not a brand off but very good Mo and has existed for some time - including Dell has used their) there is a setting under embedded devices.  It's called "Legacy USB Storage Detect". If this option is enabled it will attempt to boot from a USB device. The "rocket", like others, lights up as soon as your PC turn on.  It was trying to boot from the "rocket" and causing flaky problems.  Once that I disabled it the problem has been resolved.

    I should have taken myself.  Arghhh...

  • I have a problem with my new battey.

    Hello

    I have burshaced a new battery just two days, a go.

    My new battery is:

    multiple charges of 12 cells HP extended battery (ks527aa)

     

    In its terms of reference, I found that it works up to 8 relax, he worked with me for 3 just relax until he had to reload!

    My labtop is Hp dv6 2170ee.

    Y at - it problems with my new battery?

    Please help me.

    Thank you much in advance,

    Best regards

    Aya.

    You are making it harder than it needs to be. As I said, run the battery up to 20% and run it up to 100% of load in the laptop. There is never a need to charge outdoors. Yes, 2 hours is a bit low for a cell of 12. As I said before 3.5 to 5 hours is a better scope. Try power cycling as I suggest. You can afford to put two or three cycles on the counter. Also watch the video I linked to you and see if you can pick up some practices that will help you extend the life of video. If you have switchable graphics you will get much more autonomy in the integrated graphics intel then the dedicated system. Crank also the brightess of the screen down a few notches.

  • Dependency problem with the new Blackberry Plugin for Eclipse

    I just encountered a problem with the new version of the JDE Eclipse Plugin. I set up my application project so that it uses two other projects such as libraries. Both of these projects are on the way to build Java in the settings of the application project, and the manufacturer Eclipse compiles without errors.

    But when I try to run on the Simulator, the application loader throws an Exception stating that it could not find one of the classes listed in library projects. Since it is the importation of first class in the main class, I guess that it was unable to find the entire library.

    I tried to have the application project to import the project two library, but nothing alx files has changed.

    In the old version of the Plugin, there is a property of the project "Blackberry project dependencies" or something like that, which should be set for library and rapc.exe projects and the simulator would be their. That went away, and I was told during Devcon now suffice to add libraries to the classpath. Apparently, this is not so for me.

    Can you give me an indication of what goes wrong?

    The problem seems to be that I imported my projects since the previous version of Eclipse plug-ins, Blackberry. I have now created a new workspace and new projects, completely maintaining the source files, and it works.

  • Problem with adding new storage to the CDV provider profile

    Hi all

    I have problem with adding new storage to the CDV provider profile.

    My ENV:

    VCD Version 5.5 latest

    vCenter 5.5

    VCDDB - SQL

    I created the environment with two profiles of storage for the first time and it's work well (the storage profile created before I joined the vCenter on the VCD)

    I created tags and he attributed to the data store and I see the new VM storage through the vSphere web client policy.

    I can also see VMS on the VCDDB the dbo.storage_profile_inv the new storage policy table and when I create new provider TDC I can't.

    What I'm trying:

    1 Refresh the storage via the VCD (right click on the attached vCenter) profile

    2. restart the inventory and the profile based on the vCenter servers

    3. restart the VCD and vCenter servers

    Help, please

    You can just follow KB 2075366.

  • z index / layer of problems with the new YouTube widget!

    Hello!

    I am facing a problem with the new 'youtube' of social media widget. I currently have two layers in my projects. This is a project for which the menu scrolls initially and then sticks to the top of scrolling parallax. By continuing to scroll, the embedded YouTube video widget does not scroll under the menu as it should but scrolls through the menu. It's strange, as the YouTube widget was placed on level 1 and the menu is at level 2. Shouldn't the menu then always be on top? Only the new widget is not properly defined index-z?

    You can check my web project (and look at the code) here: http://www.firstlight.at

    Any help is greatly appreciated!

    I managed to solve the problem, and I believe this to certainly be a bug in Muse...

    In order to avoid widgets Youtube iframed swim on top of all the other div tags, I had to change the code, add wmode = "transparent" and wmode = "Opaque" to the class of the iframe. This works if you replace all the other parameters behind the CBC "&" by "& amp"tag.

    Here's the original code generated by Muse. This could not prevent my "2nd layer" slip below "Layer 1".

    Makes the following changes to the code, forced the Youtube widget below all other div again (I pinned all changes to "BOLD", so you can see the changes easily):

    Ensure that you do not miss the following change: you need to change all of the vipers '&' to '& amp' this procedure will not work!

    After the new version, I'm sure the Adobe team is working hard to bust of bug last version. But I hope that we will be dismantled soon, otherwise users using the youtube widget will have to recode output Muse whenever we make a change and it is exactly what is the Muse striving to prevent (; After all, in Dreamweaver, you can hardcode the change and he would stick!

    I hope that it will be useful to someone!

  • Pavilion Elite HPE-170 t: problem with the new HP DH16D5S DVD ROM drive

    My office is a HP Pavilion Elite HPE-170 t.  I recently upgraded from Windows 7 to Windows 10.  I have two HP optical dirives, one is a writer, and the other is just a DVD ROM  Both have always worked perfectly with Windows 7.  After you have installed Windows 10 continuous burner work very well works correctly with autoplay.  However, the DVD - ROM, HP DH16D5S, immediately began using autoplay.  Actually the drive was not yet recognized as a drive when you view the drives in the file Explorer.  Finally, it would seem, sometimes taking also longer than 5 minutes or more before doing so and then would work very well.  I tried different types of media, including music CD, DVD video and DVD software with the same results.  I assumed that it was a problem with the drive, maybe a bad capacitor, etc., which was originally not start correctly.  So I ordered a new DH160D5S, but which seems to have been a waste of time and money, because it does exactly the same thing as the original.  I even changed the cables autour between it and the burner, but it made no difference.  The burner still works fine but not DVD ROM.  I tried to find a more recent driver for it, but had no chance.  I found on a Dell website for this drive which was an update of the firmware for Windows Vista and Windows 7, but not for Windows 10.  I advanced and downloaded, but when I tried to run, I got the message: "your system does not meet the minimum requirements for this update.  Update has been canceled. »

    I want to try a different brand of DVD ROM, but would have to buy one without knowing if it would help.

    Any help will be appreciated.

    Since I posted this message I discovered that there is a driver problem with this DVD ROM.  There's no driver available yet to make the drive compatible with Windows 10.  Since then, I returned the drive and replaced by another brand that is compatible with Windows 10.

  • Satellite U500-17F: problems with the new HARD drive

    Hi everyone, I got some troubleshooting with my Satellite and a new drive, I bought recently, because that is already damaged because of too many bad sectors. One is a Western Digital Scorpio Black 320 Bg (WD3200BEKT model number). It should be a fast reader but is not with my Satellite.

    After having mounted the drive in the laptop, I ran a new installation (with full disk format} Windows 7 (64 bit) with all the necessary drivers (that I downloaded directly from the Page of Support Toshiba.)

    The problem is that the laptop needs a lot of time to start and also to disable, and whenever I try to run an application or start a program (for example Firefox, or just a few windows applications), the laptop freezes for about 30 to 60 seconds, the drive no longer works (you can hear leaders put in position 'parking' and the HDD LED control is constant) ", no lights flashing).

    It seems that the drive (during this 30-60 seconds) in something as a stand-by mode. I ran a few Western Digital diagnostic tools and the car looks all right to 100%. It works also without any problems in the other laptop (HP Pavilion DV6500). Could this be a problem with the controller (Intel ICH9M - E ATA AHCI controller) driver?

    Any suggestion?
    Thanx

    Hello

    You use the latest version of the BIOS?
    Please check if you need a BIOS update. Of course I read in a few discussions on the similar question of Win XP you use Win 7 but its value to check the update of the BIOS and U500 series.

    In addition, I recommend check you the power of Windows 7 options.
    Disable in the power profile that you use power saving HDD.

    Just a question:
    You use the option AHCI in the BIOS?
    As far as I know it of possible to use either a compatible SATA AHCI mode.
    AHCI must be used because this option would use full SATA performance.

  • Anyone having problems with the new iPhone LTE connection 7 on Verizon?

    I am now on my iPhone second 7 with Verizon. I had four phones for me and my family. I have now had issues where I have no signal in the same areas where my signal allows to be strong. I can't solve the problem with the activation/deactivation of the airplane and then mode again in normal mode. My phone will rest with no signal for 5 minutes, then going to LTE with three bars. I also had the problem where I had only 1 x signal, while my son standing right next to me has LTE. And he had the same questions, where I'm on LTE and it gets no signal. I use to have LTE where I live and work all the time, now it's spotty at best. Apple has replaced me and my sons iPhones but not luck. Still do. Any ideas or an any other suffering?

    (1) go to settings/cell phone/cellular data Options/enable LTE and select ONLY the DATA. This seems to solve the problem (as a temporary solution) for most of the people affected by this problem. The bad part is your request might not be as clear (since they cannot use the highest LTE signals) and you can make calls and data at the same time. But it does not solve the issue.

    (2) there are rumors (but you didn't hear that from me that we only are not supposed to discuss beta software program Apple in this forum) that the new version of Apple Beta for iOS (which also includes an update of the software carrier Verizon to 26.0) seems to solve this problem. So, there's a light at the end of the tunnel.

  • Problem with the new update

    Any browser looks graphically unstable and content is empty with the new update, is it just me or is just the update which is unstable?

    Hello

    Try disabling graphics hardware acceleration. You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

    Then perform the following steps:

    1. Click the menu button

      then select Options Preferences on Mac or Linux, or Windows.

    2. In the window of Firefox Options (or preferences), click on the Advanced tab, and then select general.
    3. You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
    4. Now restart Firefox and see if the problems persist.

    In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

    This solve your problems? Please report to us!

    Thank you.

  • Strange problem with the new ca and on Satellite M45 mouse adapter

    Hello

    Recently, my adapter had problem with load the laptop (model M45-S2692), so I bought another card. The new adapter has worked for a few months and now its behave differently.

    If I plug the adapter into the laptop, the mouse does not work and works otherwise.

    Does anyone have an idea on what could be the problem.

    Please advise.

    Concerning
    Suri

    Hey Buddy,

    Therefore, may I ask if the adapter that was purchased is an original toshiba AC adapter? Why didn t contact you a servicepartner, since they had probably had your sector-free adapter because you have something called guaranteed.

    How Don t you know the adapter you have, there where he knows do not so it s original or not, do not damage anything on your motherboard for your machine.
    Maybe it has nothing to do with your power adapter...

    I would appreciate comments on your part just a small one description which CA is, when you bought your machine and if the error could be reproduced with the removal of the AC.

    Welcome them

  • Problem with the new tab button

    The problem with my Firefox, it's the 'new tab' button at the end of the last tab, then in the menu "open a new tab" doesn't work at all. Open a new window does not work but the new tab not. That's happened?

    This problem may be caused by the Ask.com toolbar (Tools > Modules > Extensions)

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the Add-ons is the cause of the problem (switch to the DEFAULT theme: Tools > Modules > appearance/themes).

    • Makes no changes on the start safe mode window.

    See:

  • Problem with the new installation of Windows XP on the Satellite A100-259

    Hi all!

    I have a problem with the fresh install WIN XP on Satellite A100-259 (PSAA2E).
    I already deleted the partition, formatted (NTFS) and tried to reinstall from recovery disk that initially provided with the laptop. But whenever I try to install a problem is detected (for the most part it's 'page in the nonpaged area failure').

    I also tried to install the OS directly from MS Windows XP Home Edition SP2 CD - the same problem.
    I checked the partition using PQ Magic and discovered that there are ' partition table error #110 ".» So, what I did:

    (1) delete partition-> create new partition-> format (NTFS)-> reinstall from recovery disk-> has not yet;
    (2) partition delete-> install WinXP CD original by create and format partition option-> has not yet;
    (3) delete the partition (using the magic of pq)-> create partition (using the magic of pq)-> format NTFS partition for win xp option-> check partition-OK no problems don't-> installation of original win XP CD-installation without changes-> option failed even once
    (4) delete the partition (pq magic)-> create partition (pq magic)-> format NTFS partition for win xp option-> check partition-OK, no problem-> installation of the recovery disc-> has not yet

    Whenever a different error is detected, so I can't identify the problem. I don't know what to do. Does anyone have any ideas?

    Hello

    Seems that there are some problems with the standards of the partitions.
    A friend of mine has tried to install the OS on the recovery CD on the laptop that has been formatted with Partitions Magic 8 and the installation failed.
    It was very strange

    Finally, we have formatted the whole HARD drive using the CD original Windows XP Pro.
    We did not remove the partition but simply kicked this CD and after the configuration process spent, we formatted the whole HARD disk and install XP without creating all the partitions.

Maybe you are looking for