PROBLEMS WITH NETWORK CARD

Similar Questions

• Extremely slow WRT54G navigation pages @ 192.168.1.1 - this could be a problem with network card?

  Friend of mine is having the problems of Internet connection on his main PC which is hard wired to the router, it is using Comcast cable (18Mbit) and all of a sudden today the speed fell to dialup speeds, literally, however its ONLY this main with the issue of speed pc, there are 2 other computers connected wirelessly to the router, and they run at full speed during the test on speedtest.net

  Solve the problem, I tried bypassing the router and still have the issue of speed, so I can pretty much rule out the router, but as part of my troubleshooting whenever I try to access the router configuration pages via 192.168.1.1 but it is VERY slow to respond.

  For example when hitting enter after typing 192.168.1.1 it takes about 45 seconds to view the router configuration page, and then clicking on any other tabs takes 30-45 seconds longer to respond.

  So my main question with this post, is it possible that its network card went bad? What would cause really slow access to the configuration of the router?

  The PC is under Win 7 Ultimate 32 bit and Ive tried to run the network troubleshooter, uninstalled the network card in Device Manager / reinstalled the drivers but nothing seems to work.

  I also ran Malware Bytes and the analytical results were clean.

  Any ideas appreciated!

  can you 'borrow' a card? This is the only way to be sure, eliminating hours of trial and error procedures. one of the mega electronic stores is a good source, if it solves your problem you keep the card, otherwise there is the option to return

• problem with network card with 10 Windows and Fusion

  I can't get my network card to work as I have improved my VM to Windows 10.  It shows that permits and OK in the Windows Device Manager but disabled and cannot be enabled in network connections. This happened with Fusion 7 and continues since I upgraded to Fusion 8.  I reinstalled VMware tools, remove the card and reinstalled in Windows, remove the card and reinstalled in the settings of the Virtual Machine in Fusion.  It happens both in mode 'Share with my Mac' and automatic bypass. Please advise.  Thank you.

  As mentioned in another thread: got back to Windows 7, search, and uninstall a client VPN, re-start at level to Windows 10.  Networking, then worked correctly.

• Re: problem with network card and display

  Hi all

  I recently got Tecra S11 - 11H.

  A few days windows was updating procedure. After restart external monitor connected to dsub connector changed display Resolution 1600 x 1200 (from a native 1920 x 1080). In my frustration, I tried system restore as windows update creates restore points. There were losses of document in the process, but I was NOT able to restore the laptop to the previous state.
  Using the nvidia Control Panel, I get internal resolution of 1920 x 1080 to external monitor ONLY when toshiba lcd is turned off.

  Now, I have 10 seconds delay between http requests. And that is unacceptable. What are my options here? Update includes changes to the firmware? In the cases where I decide to reinstall Windows 7 all over again with recovery disk, which will fix something.

  Please help me!

  Hello

  > Don't update includes changes to the firmware? In the cases where I decide to reinstall win7 all over again with recovery disk, which will fix something

  N ° it includes any firmware changes. Yes, reinstalling windows with the recovery disc will fix your problems as preconfigured values. In Windows, update option, clear *, Install updates automatically *, you can check the updates yourself and choose to install.
  Before beginning a new installation, remove the installed windows updates recently and download a display and a Lan driver of the [page driver Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp] if it solves your problem, you don't need to perform a new installation. If not, do it.

• SCO UNIXWARE 7.1.1 install vSphere 4 (ESX 4) ERROR problem with network card

  Hello

  I try to install SCO unixware 7.1.1 on vSphere 4.

  Install and configure sco OK after installation OK, but after you configure NIC SCO is dead

  PANIC: Integer zero-divide trap in kernel mode

  When I disconnect the NIC so unixware run OK

  Thank you

  This looks like a known bug of UnixWare.  You must install SCO UnixWare Maintenance Pack 5 before setting up networking.

  Please see the section of the Guest operating system Setup Guide for SCO UnixWare 7.  In particular:

  Note To avoid a kernel panic, install MP5 before performing any configuration network on UnixWare 7.1.1.

• HP pavilion f002sm 17: hp pavilion 17 f002sm problem with graphics card

  OK Hi again, you help me with my problem with graphics card yesterday I install the driver for my laptop and I can play games, but I I look for tools of diagnosis and is in writing which is r5 graphics card which is built on my laptop and I have A7 graphical please help amd a8 6410 win 7 32-bit

  Hi @zumzo ,

  I understand that you have installed the driver and it works fine.  When you checked the diagnostics you became confused because it says graphic R5 but you R7.

  According to the specifications of your laptop you have AMD Quad - Core A8 - 6410 APU with graphics Radeon R5 (2 GHz, 2 MB cache).

  Here is a link to the 17-f002sm HP Pavilion Notebook product specifications to confirm this information. I hope that this eliminates any confusion.

  

• problem with memory card reader

  bought an Acer C720 Chromebook in July, nine.  Now problems with memory card reader.  Sometimes he reads, sometimes it won't.  This can be corrected?

  Hi PatPeoples84,

  Yes it is possible, unfortunately it will probably come during the service.

  I recommend you contact the provider of the guarantee. In the United States, refurbished products are managed by another institution as new products. If you have any questions, thinking to send me a private message with your serial number and I'll help you get the correct coordinates.

  Thank you
  Cory

• I have a problem with a card being inadmissible for the zoom on a phone.

  I have a problem with a card being inadmissible for the zoom on a phone. The Web site has been formatted for the phone using Muse. The plan should be saved in a way in Photoshop or y at - it a setting in the Muse who can fix this?

  Please provide more details, as if the card is integrated an image or a real map generated by widget.

  The generated plan must zoom in/out.

  Thank you

  Sanjit

• problem updateing network card driver

  OK, my problem is that I can not update my network card drivers, it say found update failed to install the access file can not possible due to being used by another process I also have to download it to my desktop but cannot install, same reason, update (Wireless LAN_Atheros_7.6.0.172 Vista x 64 Vista x86_A) , they say everything that causes this problem prevents me to install my viper internet security and help my usb stick also.any mass storage usb not recognize?
  Following in the DRV log error message:

  (EE) Error calling SetupCopyOEMInf:? -> Z, State = 0x20
  (EE) Setup of the network, the INF file error: C:\Program Files\GFI Software\VIPRE\drivers\sbfwim.inf PNP ID: sb_SBFWIMcl hr: 0 x 80070020
  (EE) Component Setup error, INF file: C:\Program Files\GFI Software\VIPRE\drivers\sbfwim.inf PNP ID: sb_SBFWIMcl hr: 0 x 80070020
  (EE) Error in InstallIMFile: status 0 x 57
  (II) delete the service: SbFw
  (II) delete the image file of the driver: C:\Windows\system32\drivers\SbFw.sys
  (EE) Error SBFWIM_InstallDriver
  (EE) Install the drivers failed (87) remains of AVG found on the machine.
  -Removal of AVG Ran tool
  -always impossible to install.
  -A tried to update driver and it does not:

  "The process cannot access the file because it is being used by another process".

  -Probably impossible to install this same reason VIPRE.

  Hello

  I suggest you try these methods and check the status of the issue.

  To solve the problem of installing Viper internet security:

  Step 1:

  Run the fix it.

  Problems with programs that cannot be installed or uninstalled.

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Step 2:

  Keep the computer in a clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.

  http://support.Microsoft.com/kb/929135

  Note: Please, go to step 7 of the Kb to maintain the computer to a normal startup after you fix the problem.

  Step 3:

  Disable the antivirus software and try to install the application.

  Disable the antivirus software.

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  To set the update driver wireless.

  Method 1:

  Hardware devices do not work or are not detected in Windows.

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  Update a hardware driver that is not working properly.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• Problem with network controller / wireless driver

  Hello, I have problems with my computer network controller. I can't connet to the Internet wireless or wired. In addition, two of my USB Ports do not work.

  My system is HP Pavilion G4 - 2235dx

  A6 - 4400M with Radeon AMD

  Windows 7 Professional

  The hardware ID

  PCI\VEN_168C & DEV_0032 & SUBSYS_1838103C & REV_01

  PCI\VEN_168C & DEV_0032 & SUBSYS_1838103C

  PCI\VEN_168C & DEV_0032 & CC_028000

  PCI\VEN_168C & DEV_0032 & CC_0280

  There are other issues such as:

  PCI device

  SM Bus controller

  USB controller

  When you open Device Manager and every thing under "Other devices" are not available, you will get the real picture. Please I need your help to make this work again.

  Thank you.                       David

  Hi, David:

  Here are links to the drivers you need:

  1. first install the amd chipset driver and restart. You only want to use the first file on the Web page.

  This will install the smbus and usb3 controllers.

  http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

  2. wireless card driver is the following:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5229464&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118499_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  3 PCI device is the following:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103762-1&cc=us&DLC=en&LC=en&OS=4063&product=5275619&sw_lang=

• Problem with network interface of Vsphere

  In my interface Vsphere, on an esxi4.1 I see no vswitches and no information, even though in the console, I see this drug ok.

  As I watched in the var and /var/log/vmware/hostd.log I see 3 lines saying:

  Mar 21 14:51:12 pass: [2012-03-21 14:51:12.608 FFDBEE90 error 'NetworkProvider"opID = AD5DBFA0 - 000000 B 7] an error occurred during extraction of virtual switch: interacting with configuration file /etc/vmware/esx.conf error: unlock the ISP ConfigFileLocker
  Mar 21 14:51:12 led: interacting with configuration file /etc/vmware/esx.conf error: I was asked to remove a. LOCK file that I'm not sure is mine.  It is a bad thing and I'm going to fail.  Lock should be released (0)
  Mar 21 14:51:12 pass: [2012-03-21 14:51:12.608 FFDBEE90 error 'NetworkProvider"opID = AD5DBFA0 - 000000 B 7] an error occurred during extraction of virtual switch: interacting with configuration file /etc/vmware/esx.conf error: unlock the ISP ConfigFileLocker
  Mar 21 14:51:12 led: interacting with configuration file /etc/vmware/esx.conf error: I was asked to remove a. LOCK file that I'm not sure is mine.  It is a bad thing and I'm going to fail.  Lock should be released (0)
  Mar 21 14:51:12 pass: [2012-03-21 14:51:12.609 FFDBEE90 error 'NetworkProvider"opID = AD5DBFA0 - 000000 B 7] an error occurred during extraction of virtual switch: interacting with configuration file /etc/vmware/esx.conf error: unlock the ISP ConfigFileLocker
  Mar 21 14:51:12 led: interacting with configuration file /etc/vmware/esx.conf error: I was asked to remove a. LOCK file that I'm not sure is mine.  It is a bad thing and I'm going to fail.  Lock should be released (0)

  In my/etc/vmware, I have a few files that start with ".". # »

  ...

  r - r - r - T 1 root root 0 18 May 2010. #dvsdata.db
  r - r - r - T 1 root root 0 18 May 2010. #esx.conf
  -r - r - r - T 1 root root 170 may 18, 2010. #license.cfg
  r - r - r - T 1 root root 0 18 May 2010. #locker.conf
  r - r - r - T 1 root root 0 18 May 2010. #snmp.xml
  -r - 1 root root 30 T 18 May 2010. #vmware.lic

  ...

  and also the file

  ...

  -rw - 1 root root 39.5 k Mar 21 14:15 esx.conf

  ...

  I would like to mention that on the ESXi virtual machines work, but can not add other elements of networking in Vsphere.

  I have attached a few out of orders for components network (vmknics, vswitches and network cards)

  Help, please!

  I need urgent HELP!

  Oops, you have ESXi but in vmware KB described how to solve the problem for ESX :(

  So that you can attempt to restart management services 'services.sh restart' other options of console - restore previous version esx.conf

• Problem with networking when having multiple virtual machines on a single host

  Since the implementation of ESX 3.5i server on PowerEdge 1850 Server I had network problems. It took a large upstream of the violin - do not do something specific - but finally I could persuate a VM to talk to the outside world.

  Virtual machines have always been able to ping other virtual machines and physical NETWORK card to the host (with a static IP address only), however with a bit of deactivation/activation etc I could possibly get it connected. I have exactly the same symptomsusing the two Windows XP and Redhat, both with VM Tools installed.

  If big, I can get the virtual machines connected, *however * every time I managed to connect a computer to the outside network, she will knock off either a return to the State where I can ping only the other VMs and Teddy.

  I tried them in different port groups as well as in different vSwitches with a separate Teddy, but exactly the same problem.

  I thought it was just my ignorance, however after thorough reading and wasting time trying different combinations, I started to think this is a hardware incompatibility or an ESX installation problem.

  Please please please, if someone can help solve the problem, or diagnose if my suspicions are correct.

  I enclose my last combination of configurations!

  Thanks in advance.

  Run 'show port-security' on the switch and see what you have.  You can also view the current configuration of the port connected to an esx.  A switch will remove any doubt relating to port config differences type.

  -KjB

  VMware vExpert

• Laptop HP 15-go99er: problem with network and WiFi

  Hey guys,.

  Does anyone know to solve this problem? I recently installed a new windows on my laptop and since then I can see is more available connections. I went to Device Manager and these drivers seems to have problems

  "Network controller"

  PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C & REV_01
  PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C
  PCI\VEN_168C & DEV_0036 & CC_028000
  PCI\VEN_168C & DEV_0036 & CC_0280

  ""PCI Device"

  PCI\VEN_1022 & DEV_1537 & SUBSYS_15371022 & REV_00
  PCI\VEN_1022 & DEV_1537 & SUBSYS_15371022
  PCI\VEN_1022 & DEV_1537 & CC_108000
  PCI\VEN_1022 & DEV_1537 & CC_1080

  Can anyone help, because I can't seem to find the proper drivers.

  Hello:

  For the wireless card, this driver should work...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127981-1 & CC = US & DLC = in & LC = on & os = 4158 & Product = 7174407 & sw_lang =

  For the E/D PCI controller, this driver should work, but you may need to install manually if auto installation does not work.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=vc_136254_1

  If it does not automatically install, go to Device Manager and click the controller PCI E/D in need of drivers.

  Click the driver tab.  Click on set to update driver.  Select Browse my computer for driver software option and find the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp66899.  Make sure that the include subfolders is selected and the driver should install.  Then restart.

• Qosmio G50 - problem with graphics card or fan problem?

  Over the last year, I bought myself a Qosmio G50 at the beginning it seemed very nice and kool or so I thought until after the expiration of the first year, I noticed a small problem with my laptop.

  1. my fans are loud and sometimes they overheat, whats worse I can't clean my computer laptop but because fans note my fans were quite
  the first year to have my laptop, so I have no idea why they are noisy, they shouldn't be doing this right?

  2. now that my fans are not clean, I'm in trouble, play with my video games, at least those who need the video card.

  3. while I play my games I have noticed how the fans or the video card video game a little speed and not the game, but you get the idea, it was bugs me for everything now.

  Here is my last question for Toshiba support here
  Qosmio G50 laptop Fans can be replaced? If so, how much would it cost?

  What are the causes of the nose of the fans to make it so hard?

  More help on my problem would be welcome.

  If you have any questions for Toshiba support service then you are on the wrong place here. This is the forum user.
  Maybe you should contact the nearest authorized service provider and ask it.

  They can clean up your computer is turned on in a professional manner. After cleaning of the cooling and ventilation of cooling grid will be dust-free and run with low speed.
  The material can be cooled properly.

• Problem with graphics card

  Hello!. I have a problem with my laptop. So I know that when I bought my laptop it has an AMD HD 3450 graphics card but in dx diag, it shows that I hava a Mobile Intel (r) 4 Series Express Chipset Family and I don't know why. Could you please tell me why it doesen't recognize the graph of amd or at least if intel is better than amd, and in this case can you tell me the model intel please.

  Answer as soon as possible. Thank you!

  Hello @CrazyWolf ,
  
  To get your question more exposure I suggest you post in the trade forums since it is a commercial product. You can do to commercial Forums.
  
  Even if it is a Commercial, Switchable Graphics function product allows you to switch between the use of the graphics card Intel and a discrete graphics like AMD controller in a computer. For example, you can switch between the battery life improved graphics Intel when running on laptop battery power and performance capabilities of the graphics controller while the laptop is plugged into current alternative. Your laptop automatically goes to the Intel graphics card if the computer switches to battery power, or he can pass to the discrete graphics if the computer is plugged into current alternative. Some computers use third-party software to perform the switch.

  I hope that would explain it.

  Thank you.