Problems with opening the file with while loop

Hello everyone,

It is probably a quick question, but I know how to open data files in Labview. The attached code works if you enter a file from the folder on the front panel button. However, if the path is empty and you press the run (arrow) button, a dialog box appears and asks you the file.

I select the file, but the dialog box keeps coming back. I think it has something to do with my while loop. Can someone tell me where I'm wrong?

Thank you!

TheLT


Tags: NI Software

Similar Questions

  • Problems to open the file in Windows Moview Maker

    I work on a Windows Movie Maker file last week, upload music, photos and video clips and count the final transitions. Never had a problem opening the classified. Today, the file will not open. The answer I get is:
    "The file was created by a version of Windows Movie Maker that is not supported." Why is - what happens after 6 days of work on this project?

    I worked on a Windows Movie Maker file last week, upload music, photos and video clips. I'm almost done with the project and start the final transitions. However, today, I was not able to open the file. The answer I get is: The MSWMM was created by a version of Windows Movie Maker that is not supported. "Why is - what happens after 6 days of working on this project without any problems. Please please help.

    =======================================
    The project .mswmm file seems to be corrupted. I feel
    you have to start over.

    Large, complex projects tend to cause problems... the best bet
    would be to create several small projects, Publishing (economy)
    each of them in the format .wmv movie to a folder on your hard drive
    drive and then re - import clips video .wmv collected and
    combine them into a final video file.

    Or... import clips .wmv in creation of DVD and each Let's
    become a scene (chapter), you can have up to 18 scenes.

    FWIW... many file formats are would have been compatible with
    Movie Maker, but the most reliable choices are:

    Photos - bmp
    Video - wmv or dv - avi
    Music - wma, wav, wmv

    John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • problem with while loop graph y Gráfica

    Hola

    Estoy realizando UN programa or UN contador cada vez as recibe UN 1, el contador to con resetea a button Reset o autoamticamente cada cierto tiempo (el don't reset por tiempo're para cuando hace mucho tiempo no to recibe una Señal 1 is resetea el contador)

    I made UN programa hace eso, pero cuando entered el resets del tiempo contador is ahi, nunca sale is asi Señal cambie has 1.

    y mi otra duda are not con the graphic grafica, results quisiera show los datos del contador with the actual date, initiates use las propiedades del chart pero no works... no self if alguien me can help put con problemas

    Gracias

    Herica M

    PD: estoy utilizando LBV9.0

    How dice crows, need leer los slideshows you mismo you of the account of that are what you are doing wrong.

    Aqui el annex you VI con unos cambios para as haga lo that I think quieres hacer, pero comentarios puse if tienes dudas me questions.

    Para lo grafica en las propiedades del eje X, seleccionas as el tiempo absoluto sea dato, y luego con UN nodo propiedad Escalin grafica puedes hacer al eje X shift para as sea the actual date.

    Decree No. presidential Te perfect use el foro en Español, TR o lo going poner Aquí, hacerlo in Frances.

    http://forums.NI.com/NI/Board?Board.ID=6170

  • Download a file should implement an option to open the file or save it - for some reason any now just downloading it straight to the download folder. Why? Problem with Firefox or something else?

    Download a file would normally bring up an option to open the file with the appropriate program or save it - for some reason any now just downloading it straight to the download folder. Why? Problem with Firefox or something else? It is very frustrating - sometimes, you want the first opened file so it can be discarded or stored in a different location.

    Find the type of file in the Firefox -> Options -> Applications Panel, open its menu drop-down and select 'ask '. To reset all the actions of download, delete the mimeTypes.rdf file in your Firefox profile folder (or rename the mimeTypes.rdf X if you want to save as a backup). The file will be regenerated with all types of files, restore the default actions.

    For more information, see application Panel - set how Firefox handles different file types and change what Firefox does when you click on or download a file .

  • As a plug-in?  I have problems with an editable IRS form.   It gives me "Access denied" and then opens the file as an editable file.  I was able to open the form in the library.

    As a plug-in?  I have problems with an editable IRS form.   It gives me "Access denied" and then opens the file as an editable file.  I was able to open the form in the library.

    I found a few other questions on this forum who have remained unanswered.   I found a site citing the problem for drive X - I use XI.

    Change to drive XI.   Perhaps the reader at the library had this as its default setting.

    1. In Adobe Reader, clear the check box enable the Mode protected at startup :

      • If you have a PDF open, right-click the document, and then click Page Display Preferences.
      • If you open Adobe Reader from the shortcut, click on Edit > Preferences.
    2. In the categories dialog box Preferences pane, click (enhanced) protection, and then clear the box enable the Mode protected at startup .
    3. Close and reopen Reader.

    I have no idea if that setting has been changed in my XI player since I used this version exactly one year ago.

  • I have problem with Muse files when you work at home with my laptop and when I open the files again in my work with my IMac.

    I have problem with Muse files when you work at home with my laptop and when I open the files again in my work with my IMac.

    I do: when I am uncomfortable with the laptop I save the files on the laptop, then on my external hard drive. Then, when I'm at work, I opened the drive, but the Muse says every time, that so many links in the 'active' is missing. And it takes a lot of time to get all the missing link. Like today I had to open a file of Muse from the external hard drive, and there are about 100 links that are missing.

    How can I solve this problem

    the best thing if you are a user of creative cloud is to store the files in a folder in your account of cloud instead of transferring the files from one computer to another.

    If you are not a Subscriber cc then Dropbox or iCloud will work as well.

  • Hello I am a student and I have a problem with the tool Selection (V). When I opened the file AI CC with CS6 selection tool doesn't allow me to change the selection. What can I do? (I have reinstall AI CC and the problem persists)

    Hello I am a student and I have a problem with the tool Selection (V). When I opened the file AI CC with CS6 selection tool doesn't allow me to change the selection. What can I do? (I have reinstall AI CC and the problem persists)

    Ivan,

    If it's on the rectangular objects, you may have encountered the bug Rectangle Live which is limited to the MAC versions from 10.7 and 10.8, but not of 10.9 (Mavericks) or 10.10 (Yosemite). If all goes well, the bug will be fixed soon.

    Thus, a switch for the Mavericks or Yosemite with a reinstall might be the way to solve it here and now.

    To get around it, in each case, it is possible to develop direct Rectangles to get the normal old shaped rectangles or Pathfinder > unit, or use the scale tool or the free transform tool.

    A more permanent way round that is to create normal old shaped rectangles, after running the free script created by Pawel, see this thread with download link:

    https://forums.Adobe.com/thread/1587587

  • Problem with opening the files after the installation of creative cloud

    I am under creative cloud in Windows 7. Since the installation of CC when I double-click on a file icon the program opens but the file is not. I can only open the file on the file menu in the program. Very inconvenient. In addition, Acrobat now displays the error message randomly, "Acrobat failed to connect to a DDE server. Does anyone have a solution to these problems? Please notify.

    Hi Rhaydn,

    Test to see if you get the same behavior in a new user account with administrative rights. What types of files and programs were a double click when the application open but not the document? For the question of Acrobat, I found this thread

    http://forums.Adobe.com/thread/416414

    If this does not help, I recommend posting on this thread as well as anyone the problem.

    -Dave

  • I downloaded the 32-bit, Windows 7, Internet, and now when I try to open the file you just downloaded with an MS-DOS screen opens then closes instantly. What should I do?

    Ideas:

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Hi Chris.Plucker,
     
    Thank you for using the Microsoft answers Forum
     
    I would like to ask you a few questions to better understand:
     
    (a) you try to open the file from Internet Explorer?
     
    (b) if so, have you tried with other browsers?
     
    (c) from which site did you download Windows 7?
     
    (d) what is the name of the file you want to download?

    To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

    Follow the steps below to put your computer in a clean boot state:

    Note If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.

    1. sign the computer by using an account with administrator rights.

    2. click on the Start button, type msconfig.exe in the Start Search box and press ENTER to start the System Configuration utility.

    If you are prompted for an administrator password or for confirmation, type your password or click on continue.

    3. on the general tab, click Selective startup, and then clear the Startup items load check box. (The box use the Boot file is not available.)

    4. on the Services tab, click to select the hide all Microsoft services check box, and then all disable.

    Note Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.

    5. click on OK, then restarting.

    Check the link to learn more about the clean boot below:

    http://support.Microsoft.com/kb/929135

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    1. click the Start button, type msconfig.exe in the Start Search box and press ENTER.

    If you are prompted for an administrator password or for confirmation, type your password or click on continue.

    2 in the general tab, click the Normal startup option, and then click on OK.

    3. When you are prompted to restart the computer, click restart.

    Waiting to hear from you

    Thanks and greetings
    Aziz Nadeem - Microsoft Support

  • System 32 error (0x00000020): "the process cannot access the file because it is being used by another process.". The operation to open the file will fail with error - 1032 (0xfffffbf8(JET_errFileAccessDenied))"

    Original title: svchost (1020)

    Event type: error
    Event source: ESENT
    Event category: general
    Event ID: 490
    Date: 2010-10-19
    Time: 14:51:34
    User: n/a
    Computer: ROB
    Description:
    Svchost (1020) an attempt to open the file "C:\WINDOWS\system32\CatRoot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb" for read / write access failed with the error System 32 (0x00000020): "the process cannot access the file because it is being used by another process.".  The operation to open the file will fail with error - 1032 (0xfffffbf8(JET_errFileAccessDenied)).

    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

    Hi Robrw,

    1. when exactly you receive this error?

    2. don't you make changes to the computer before this problem?

    You can try to rename the catroot2 folder and check if it helps.

    Step 1:

    a. Click Start and in run type C:\windows\system32 and click ok

    b. find the Catroot2 folder. Right-click on Catroot2 and rename it to Catroot2.old

    If you are not able to do the normal mode, try to start in safe mode and rename

    Check out the link for more information on starting your computer in SafeMode below:

    http://support.Microsoft.com/kb/315222

    Step 2:

    If you are unable to access the catroot2 folder, and then try to change the permissions on the files and check if it helps.

    See the following article:

    How to capture a file or a folder in Windows XP

    http://support.Microsoft.com/kb/308421

    Step 3:

    You can also try to temporarily disable third-party security software and firewalls and check what is happening.

    Note: Activate the security software after the resolution of the problem.

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • I have windows vista and when I click on a shortcut on the desktop I have a pop up asking what file to open it with. In order to open the file I find the actuall file.

    Original title: registry exe problem

    I have windows vista and when I click on a shortcut on the desktop I have a pop up asking what file to open it with. In order to open the file I find the actuall file. This also occurs when you download the software, which makes it difficult, because the file is not on the pc yet. All solutions?

    Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

    Microsoft has suggestions and offerings to

    http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

    Moderator Forum Keith has a few suggestions along this line to

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

    If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

    You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type sfc in the search box, right-click to SFC. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

    Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

    I hope this helps. Good luck.

  • When I try to open Firefox and explore, I get a menu of recommended programs and asked me to choose the program with which to open the file.

    Original title: open Firefox and explore

    When I leave early to Mozilla Firefox or Explorer, I get a menu of recommended programs and asked me to choose the program with which to open the file. When I do, I get a security warning asking if I really want to do. If I check "Run", I get redirected to the previous list, and I find myself in a circle without end. It does not matter what choice to make. Used to be that I went from starting Firefox directly.  I can get in if I have Firefox right click and choose to run the file as an administrator and then give permission to open the program. How can I cut these two additional and direct access, that I used to enjoy. I run Vista. The same thing happens if I have to explore. Would be grateful for the help.

    Hello

    1 during how long have you had the problem?
    2. don't you make changes to your computer before the problem?

    I suggest that you follow the steps below and check if the problem persists.

    Method 1:

    When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program
    Method 2:
     
    Step 1:
     
    Make SFC scan and check if this is related to missing or damaged system files.
     
    Step 2:
     
    After the SFC scan, set the file association and check.

    Method 3:

    Test the issue in a new user account .
     
    See also:
  • How to open the files .fxm and .fxr with fax windows 7 & scan?

    How to open the files .fxm and .fxr with fax windows 7 & scan?  These faxes have been received when I had Windows XP.

    Hello

    A file with FXR and FXM file extensions is a Document received from WinFax.

    You can open the FXR and FXM file by double clicking on it and let your PC decide which default application should open the file.   If no program opens, the FXR and FXM file, then you have probably an installed application that can view and/or edit FXR and FXM files.

    You can use a Notepad or another text editor to open these files.  Number of files is files read-only, which means little matter file extension, a text editor may be able to view the contents of the file properly.  This may or may not be the case with FXR and FXM files, but it's worth a try.

    How a FXR and FXM files:
    There are two ways to try to convert a file to a different file type:

    a. open the FXR file in its default program and choose to save the file open in another file format.

    b. use a softwarefrom online file conversion to convert these files to another file format.

    Note:
    using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

    Thank you

  • Convenient way to transfer your photos with the browser with the interface to open the file one by one?

    Guys, is there a practical way to manage photos download from a browser with menu open the file?

    Almost 4 years ago I switched from Windows and I still have to keep a copy of Windows @ my iMac, retina uder | Desktop just to download the fotos on social networks!

    I can't find comparable sort on OS X with speed and efficiency of a Windows file manager in Windows! I have anyway to browse the files one by one in OS X and uploadinf the u as browser files? And then turning in the folder covered exactly the position of file where u left to transfer a file?

    For example I have 3000 photos in a folder of my trip to US. If I download choose and download few of them in a menu Finder to open the file in the browser and then return to the folder I want to browse all the photos from the beginning to find a file that I was browsing last! At least windows remembers the position of a file chosen when you left the file!

    Did you ever notice how LAGGY is photo navigation interface in the menu "Open a file" Safari? Especially when you set to display pictures in a LIST? GWD! The operating system that is more focused on the photo does not offer ANY practical way to manage photos!

    alejandro_64,

    Your workflow is erroneous. I would recommend that use you the Photos app to manage your photos and if you then want to upload them to a social network like Facebook, or else others you can do so directly from the Photos app. This way you can manage your photos and share those you want easily. If you use any Photos now, you're a great DIS-service.

    OS X is much more elegant and more simplified MS Windows has never been, unfortunately, you have not discovered what OS X features to do so.

  • Trying to open the files Windows 3.1 with Vista Home Premium 32 bit

    I am trying to open the files of an old computer running Windows 3.1. the files include MS Publisher, MS Works, encyclopedia Compton, & several other w/3.1 compatible programs. Y at - it a program or an update to Vista that can be used to open these files? What I try to open it & save programs on a version of Windows 3.1 & Vista before using on Vista? I can't open files from MS Office that have been made on a computer running Windows 98 or 2000. Any ideas?

    Windows has many built-in features to make it as compatible as possible with older versions, but Windows 3.1 is really a little old! You can try to use Compatibility Mode, but it goes only up to what Windows 95.

    To run an older program in Ccompatability Mode (as if your PC was using an older operating system):

    1. right click on the program and select 'properties '.

    2. go in the 'Compatibility' tab at the top.

    3. check the first check box and to set up the 'Windows 95 operating system "(which is as old as that).

    4. check all other settings for maximum compatibility (depending on the program that you try to use, some may not be necessary, but you should try each of them to be sure).

    5. click "OK" and try to run the program.

    Note: If you want to try to do this at a program Office (and other Windows programs), this may not work. Please ask for more help with this.

    Your files, you need to just find a compatible program to open with. Please tell us the types of files for more help with this.

    Rifdhan

    If this is your answer, click on "Mark as answer" below. If it's useful, click on "Mark as useful" on the left.

  • Windows media player does not automatically open a video file on a Web site but I save it and open the file with Windows media player to play the video or audio recording.

    Windows media player does not automatically open a video file on a Web site but I save it and open the file with Windows media player to play the video or audio recording. I used to be able to play any video or audio file in any site!

    Hello

    Try resetting the default associations for WMP and IE.

    How to set default Associations for a program under Vista
    http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html
    How to associate a file Type of Extension to a program under Vista
    http://www.Vistax64.com/tutorials/69758-default-programs.html

    If necessary:

    How Unassociate a Type of Extension file in Vista - and a utility to help
    http://www.Vistax64.com/tutorials/91920-unassociate-file-extention-type.html
    Restore the Type Associations by default Vista file extensions
    http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html
    How to view and change an Extension of filename on Vista
    http://www.Vistax64.com/tutorials/103171-file-name-extension.html

    ====================================

    Also follow these steps:

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    ------------------------------------------------------------

    Then, if necessary:

    Have you recently installed another player?

    Reset your associations for WMP and IE.

    How to set default Associations for a program under Vista
    http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html
    How to associate a file Type of Extension to a program under Vista
    http://www.Vistax64.com/tutorials/69758-default-programs.html

    ---------------------------------------------

    Do this to reregister the Jscript.dll and Vbscript.dll files.

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    type or copy and paste-> regsvr32 jscript.dll
    Press enter

    type or copy and paste-> regsvr32 vbscript.dll
    Press enter

    Restart and if all goes well, it will run now.

    --------------------------------------------------------------

    Have you recently added stores or ANY application from Stardock?

    Using 64-bit Vista?

    Can you think of recent things you did in WMP which could be the cause? You added another
    reader recently or an add-on for WMP?

    When I try to use Windows Media Player 11, the program does not start, or some UI elements
    are empty - a Mr Fixit
    http://support.Microsoft.com/kb/925704/en-us

    Maybe something here
    http://msmvps.com/blogs/chrisl/articles/17315.aspx
    and here
    http://msmvps.com/blogs/chrisl/Archive/2004/10/30/17399.aspx

    Check here the news of WMP11
    http://zachd.com/PSS/PSS.html

    I hope this helps.

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

Maybe you are looking for