problems with other apps now after the upgrade only Illustrator to CC

Similar Questions

• Having problems with Adobe Suite C. after the upgrade to El Capitan on an iMac?

  Someone at - it problems with Adobe Suite C. after the upgrade to El Capitan on aiMac? What did you do about this? What helped?

  In case you downloaded the Apple Stroe Yosemite, it always can be downloaded in the section of your account purchases.

• Problems with WRT54GS and EasyLink after the addition of the Comcast Digital phone.

  I had a working network. Cable modem (Comcast), WRT54GS, 2 PCs per (an XP/SP3, a Vista Home Edition SP1), 2 cable PC laptop wireless (an XP/SP3, a Vista Home Edition SP1) and a HP OfficeJet 7210 printer (connected to WRT54GS as a network printer). Everything was going well and worked.

  Then, I added the Comcast Digital phone. Obviously, they went for a new modem cable modem cable with the phone service option. Now I can't print to the wired Vista PC OfficeJet and EasyLink displays "initializing" for too long I'll wait (5 minutes).

  Finally, I must kill EasyLink from the Task Manager. Any help or ideas appreciated!

  I solved the problem. It turns out the new modem cable and problem with EasyLink initialization were 'diversion '.

  The problem turns out to be a classic network problem! The Vista PC wired had a wrong IP address. The wireless PC XP has the printer configured with the name of network instead of the network address (IP, for example).

  When I deleted the printer on the Vista PC and added to the correct address everything worked fine.

  Apparently, the printer got a new IP address of the server on the WRT54GS after installing the new modem. In addition, it seems that Vista doesn't has not report an error of communication to a network printer, but for a direct USB connect.

• Problem with XNET start VI after the creation of sessions

  I have a timed loop sending CAN messages via XNET screws. It works great, but I always lose the very first message. It matters little, I send the first message immediately after you create the XNET session or after a few milliseconds.

  The attached screenshot shows the initialization of my four sessions XNET. Although I am starting before the session with an XNET start VI, there is without success to get the first message.

  It seems that the sessions/CAN (selectable cards and HS CAN) interfaces are initialized only after the first call to write XNET. XNET write seems to imply XNET start (see documentation), but the appellant XNET start manually after the creation of sessions does not help.

  What I'm missing to get the interfaces online and ready before you send anything?

  I was able to solve this problem because they did not actually XNET screw sorry for this post.

• Problems installing InstallShield of construction after the upgrade of MS 2010

  Hi all

  I've recently updated one of my MS 2009-2010 MS .NET applications. Now that I use MS 2010, my (THE InstallShield with Visual Studio 2010) installer will not compile. Specifically, I get the following errors:

  Error	1	-4072: Error retrieving dependency Microsoft_VC100_CRT_x86. DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C:0 to c:\program files (x 86) \common files\merge modules\MStudioCommon.2010.msm	ISEXP: error:-4072: Error retrieving dependency Microsoft_VC100_CRT_x86. DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C:0 to c:\program files (x 86) \common files\merge modules\MStudioCommon.2010.msm.
  
  Error	2	-4072: Error retrieving dependency Microsoft_VC100_ATL_x86. DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C:0 to c:\program files (x 86) \common files\merge modules\MStudioUI.2010.msm	ISEXP: error:-4072: Error retrieving dependency Microsoft_VC100_ATL_x86. DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C:0 to c:\program files (x 86) \common files\merge modules\MStudioUI.2010.msm

  Hello Steven-

  I'm going to guess that you have recently installed Service Pack 1 for Visual Studio 2010.  It seems that the SP1 for VS 2010 replaces the two merge modules you mentioned and replaces them with modules to fusion with different signatures.  Because the Studio 2010 measure merge modules were built against the version no SP1 de Visual Studio 2010, the build errors that you see the result.

  I have attached the version no SP1 merge below these modules.  You should be able to add them to your Setup project and did build errors.  Please let me know if you have any problems or questions.

  NickB

  National Instruments

• Printing problem with OE - 6 format since the upgrade to IE - 8: no space between the body and the subject line text.

  My computer is configured with XP SP3 and IE - 8. I've been using Outlook Express 6.0 (update of MS according to needs). Messages are always printed correctly. Lately, however, the body of the message printed directly below the object without line - the space between them. This happens on my Brother laser printer and my HP inkjet printer. I have not changed my settings of the printer. I've recently updated to IE - 7 to IE - 8; However, I see nothing in the settings of IE - 8 to explain this change in print. I recently installed "MobileMe" Panel Apple configuration, which has installed a separate set of folders in the list of folders in OE - 6. I did a clean (with Revo Uninstaller) uninstalling the MobileMe Control Panel, removed the extra e-mail account/folders and rebooted. Yet the printing problem.

  How to restore the space of line between the subject and the message body?

  Hello

  1. How is like print preview?
  2. don't you make changes to the footer settings?

  Method 1.
  If that doesn't help you can not save the file wmp.dll
  a. log on as an administrator.
  b. Click Start, type cmd.exe in the Run dialog box right click on cmd.exe, click Run as administrator and then click on continue.
  c. at the command prompt, type regsvr32 oled32.dll and press enter and then click OK.

  Method 2.
  If this problem started occurring recently, you can restore the computer to a previous state. You lose Internet Explorer 8 and return to Internet Explorer 7. In this way, we can check whether or not the root cause of the problem is installation of Internet Explorer 8.
  Reference:
  How to restore Windows XP to a previous state
  http://support.Microsoft.com/kb/306084

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• BlackBerry smartphone App Vanished after the upgrade to registered test?

  I downloaded an app from last week (iRecordIt for health monitoring). After the trial expires I set up my account paypal with the appworld and bought the full version, after the purchase he made me reboot, so I did, and when I did the first thing I noticed was the app was no longer on my main screen in the top6 section. But this isn't on my phone anywhere, I checked every folder. It can be accessed by going to AppWorld > MyWorld, but shortcut icon / what that either current deletion is really annoying because it is an application frequently used for me.

  Any ideas on how to get the application to display correctly? It cannot be copied or moved or whatever it is from MyWorld or settings > applications of the screen, so I don't know what to do.

  I just got this blackberry "BOLD", my first blackberry and this is my first real "purchase" of the appstore so it probably has something to do with it lol.

  HA! I have a physical batterypull on my phone and the icon of this app is back on my screen of welcome where it belongs, weird, but it worked !

• Error App 4950, after the upgrade to 11XE (Windows) of Apex 4.0 to 4.2.4

  Hi all

  After you upgrade a newly installed (Windows) 11XE of the Apex preinstalled (4.0) to 4.2.4

  http://127.0.0.1:8080/apex/f? p = 4950 no longer works.

  It gives me:

  	Error	Error processing request.
  		ORA-01403: no data found

  I can hardly imagine it is designed by design - at least I hope so.

  Is it possible to make it work again?

  Thanks and greetings

  André

  Mickael Pavan wrote:

  You must define a port other than 8080 after upgrade.

  Incorrect answer. There is no need to do it at all.

• Problems to open PDF files after the upgrade of the file server for 2012 R2

  Hello

  This weekend we have improved our main Windows 2003 to 2012 R2 file server.

  Since the upgrade, users (including myself) cannot open a PDF of the file server.  If I double click on a PDF file, it opens as usual, but if I double click a different PDF, the acrobat reader flashes (in the Task Manager I can see another instance AcroRd32.exe starts and stops) but the second document does not open.

  If I close the first document and then try and open the other, and then it opens without any problem.

  This only affected the opening of files on the new file server, opening several files on a local disk is very good.

  If I disable 'enable protected mode at startup' then I can open several documents of the file server.  I would prefer not to have to do.

  Users are using Acrobat Reader 11.0.10 on 64-bit Windows 7 and Windows 2008 R2 Remote Desktop.

  Does anyone have any ideas, it may be the cause?  And does anyone have one solution other than to disable the protected mode?

  Thank you

  Joe

  Hello

  Try the latest Adobe Acrobat Reader DC and check if the problem still exists or goes.

  It can be downloaded from Adobe Acrobat Reader DC install for all versions

  Thank you

  Shakti K

• Hi, thanks for making me signed in - finally. Now, after the upgrade to the latest Firefox, I can not play videos. Addons & pluginns all turned on and up to date.

  Hello
  I was struggling to connect to the support site yesterday and while this problem has been resolved, I was advised to upgrade to the latest version of Firefox from the system noticed that I was using an old. I was using Firefox 33 without major issues or problems at all. However I went ahead with the update, which gave me the 34.0.5 version. If good so far until what I went to play some of my regular TV series, I had followed with the previous version, only now he would not play at all.

  I know these TV series, comming from abroad might contain some harmful content to my machine or others, but I am well covered and as I say earlier they were playing fine in the previous version of Firefox. Just earlier the same day.
  

  I will be grateful if you could throw some ideas in this.

  Concerning

  J.Verano

  HI Juanverano,
  Is not a problem, Mode safe mode disables acceleration addons and hardware. If this continues and it is not an add on what will be the next step to try to disable acceleration:

  Try disabling graphics hardware acceleration. As this feature has been added to Firefox, it has gradually improved, but there are still some problems.

  You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  1. Open the Firefox Options (Preferences on Mac or Linux) as follows:
     • In Firefox 29,0 and above, click on the menu button

       

       then select Options Preferences on Mac or Linux, or Windows.

     • In 28.0 Firefox and earlier versions, click on the Firefox orange upper-left button, then select the 'Options' button or, if there is no button up Firefox, go to tools > Options.
  2. In the window of Firefox Options (or preferences), click on the Advanced tab, and then select general.
  3. You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
  4. Now restart Firefox and see if the problems persist.

  In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Update your graphics drivers to use hardware acceleration and WebGL

  This solve your problems? Please report to us!

  Thank you.

• BSOD Kernel_Data_Inpage_Error, now after the upgrade to Windows 8.1, computer laptop keeps auto restart

  Original title: Kernel_Data_Inpage_Error on Windows 8.

  Hello
  A few days ago my laptop continued to restart on its own, turning to a blue screen with a message saying: "Kernel_Data_Inpage_Error". Given that this happened that the sound no longer works on my laptop, I tried to update my laptop to Windows 8.1 to see if that could help solve the problem, but when he started to install my laptop itself restarted each time.
  Do you know what I can do to fix this?

  Please get back to me on that.
  Thank you.

  Mitch

  It works

  First thing.  I would update to win 8.1 when you have solved the problem

  These accidents were related to the corruption of memory (probably caused by a driver).

  Please run these tests to check your memory and find which driver is causing the problem.

  
  

  If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.

  
  

  Since then, it is more likely to be a pilot run everything first.

  1-Driver Verifier (for full instructions, see our wiki here)

  
  

  If the auditor does not have the issue we move to it.

  2-Memtest. (You can learn more about running memtest here)

  
  

  If you cannot start after you have enabled the auditor reboot in safe mode

  In Vista & victory (F8)

  When win 8 http://www.howtogeek.com/107511/how-to-boot-into-safe-mode-on-Windows-8-the-easy-way/

  
  

  Co-written by JMH3143

  .

• Problems with EM Database Control after the application of 10.2.0.4 patches group

  Hi all
  
  Host: Linux x 86
  DB: One-time EM control the database. Originally 10.2.0.1 patched to 10.2.0.4
  
  Last night I upgraded database 10.2.0.1 to 10.2.0.4. Everything seemed to go well. I don't have any errors in the process, and when I logged in the database control, everything seemed fine. It was late at night, so I don't navigate around for very long, however. When I came this morning and did a few more extensive trials, after login I noticed first that, in the section general, version database has been listed as 10.2.0.1.0. I thought it was quite strange because I had just been connected to SQL * more and saw that the database was aware he was at version 10.2.0.4.0. I refreshed the page and saw
  
  "java.lang.Exception: IOException while reading the response: connection reset".
  
  top of the page. I have seen this problem before, and in the past, it has been resolved by restarting the dbconsole or ensuring that the analysis configuration is set up correctly. The first thing I did was question
  
  [Home] $ emctl stop dbconsole followed
  [Home] $ emctl start dbconsole
  
  to see if it would do the trick. When I saw that it didn't, I went in the Configuration of the analysis and that he was surprised to see that he said "no element not found." I refreshed the page and this error appeared:
  
  oracle.sysman.emSDK.emd.comm.CommException: IOException while reading the response: connection reset
  
  I tried to follow all the instructions in the Readme as closely as I could. I looked on the Internet and the Oracle Forums for most of the day trying to find the cause of this error. I see that people have these errors, but the circumstances are not the same as mine. Is this a common problem? Anyone know what I can do to solve it?
  
  Any help would be greatly appreciated.
  
  Thank you!
  John

  Try C.2 (Option 2. Recreate the DB control and repository Configuration files)

  HTH
  Srini

• What are the brands on my tabs now after the upgrade?

  I've colored equidistant vertical lines of the width of the active tab. This has happened since I upgraded this morning.

  You can try to disable hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  You will need to close and restart Firefox after enabling/disabling this setting.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration

• Problems with playback of photos after the catalog import

  I just imported 400 pictures in a catalog from an another catalog on another computer and post a link to the source files (also copied from another computer), I get an error message (see screenshot). When I opened the photo to develop, I get the message that file access denied. Any ideas? Thank you

  I just imported 400 photos in a catalog to another catalog and I get an error message

  Hi rugfoot,

  Indeed, by using the wireless network can most of the time can cause permissions problems.

  Concerning

  Rohit

• Problem with opening Windows store after upgrade to 8.1 Windows

  Original title: cant access window 8 app store

  I had a 8.1 window update to my laptop.but 8 window whenever I try to open appstore, I gives me error that cannot cannot to the authentintion, due to errors, .i tried to open AppStore 3 g, wifi and broadband connection.but I still get the same error.

  Help, please.

  Hello

  Please contact Microsoft Community. I understand that you have a problem with opening Windows store after the upgrade to Windows 8.1. I appreciate your efforts to solve this problem. I've surely you will help solve this problem.

  To better understand the issue, I would need more information on your side.

  1. are you able to open other Apps of metro?
  2. What is the full error message?

  This problem might have occurred because of these reasons:

  1. Corrupt the App Store.
  2. Incorrect settings App.
  3. Corrupt system files.

  Try the steps listed here and see if it helps:

  Method 1:
  I suggest to try the procedure described in the article to reregister the App Store and check if that helps.

  http://blogs.msdn.com/b/notime/archive/2013/10/21/10458031.aspx

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information on how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.

  Method 2:
  If the problem persists, I suggest you perform the Scan SFC (System File Checker) and check if it helps. SFC scan will search the system files corrupted on the computer and replace them.

  Use the System File Checker tool to repair missing or corrupted system files
  http://support.Microsoft.com/kb/929833/en-us

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.