problems with, phone, 6, Bluetooth kit, Nissan, after update, for, Rios, 1.0.2

After the update to ios 10.0.2 - trying to use bluetooth to call my vehicle, it says: "this article is not in your phone book." How can I solve this problem?

Greetings, joybelino1!

Thank you for joining the communities Support from Apple! I can't wait to see that you are having problems with your Bluetooth in your car! The good news is that Apple has a great article that will help you with measures to try to resolve the problem. Read this article to gethelp to connect your iPhone, iPad, or iPod touch with your car radio. Even though he talks about problems with the connection, it also has the steps for other questions you may have once connected.

If you use Bluetooth

  1. Consult the user manual of your car stereo to get the procedure to a Bluetooth device.
  2. On your iOS device, drag up to open Control Center, then press ontwice to turn on Bluetooth and turn it back on.
  3. Restart your iOS device.
  4. On your iOS device, Cancel the twinning of your car radio. On the screen of your car désapparier your iOS device and any other device. Restart your car and your iOS device, then pair and connect again.
  5. Update your iOS device.
  6. Install the updates to the firmware of your car radio.
  7. If you still not connect, contact Apple technical support.

Have a great day!

Tags: iPhone

Similar Questions

  • Problem with Photoshop CC does not work after update

    I downloaded and installed Photoshop CC yesterday and worked with it without any problems. This morning, the cloud said that there is an update

    So I installed which.

    Now, the program will open but it does not meet anything, I can't access any of the Menus or load an image. The only way I can close

    is the hit Control-Alt-Delete.

    What can I do to fix this?

    David

    Hi dneely101,

    Please see the Ko: http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html .

    Kind regards

    Romit Sinha

  • I have a samsung galaxy s2 sprint phone and I just did an update for my phone. After doing so, I am unable to get my phone to register with my computer to get my music files off of it?

    I have a samsung galaxy s2 sprint phone and I just did an update for my phone. After doing so, I am unable to get my phone to register with my computer to get my music files off of it? How can I fix this problem? It worked absolutely fine before the update.

    Contact your cellular provider or Samsung with this problem.

  • 120 all-in-One desire: analysis of the problems with envy 120 all-in-One after upgrading to Mac OS 10.12 (Sierra)?

    Hello world

    My operating system is Mac OS Sierra 10.12, but the drop of HP does not include yet - that's why the "other" operating system.

    I just upgraded my Mac to 10.12 Sierra, and I've also updated software from my desire to 120. I have also reinstalled the HP utility software on my Mac. And Yes, I restarted my Mac several times too.

    Now, the challenges:

    1 120 feel like in his screen it does not find my computer when I try to scan to the computer. As if he cannot see it, even if the two computers and 120 are on the same network. This problem is new and was held just after the upgrade from Mac OS.

    2. Furthermore, when I try to activate the scan on my Mac computer, an error message appears telling me to update my software HP (see screenshot), although I've done.

    If someone had the same problem, and if you have, how you go about it?

    Thank you.

    Hello

    HP software full functionality is not yet available for Sierra, as you mentioned the ysstem functioning is not yet.

    You can scan with the application of ICA Apple (Image Capture or sweepers & Scanners), as well as thorugh HP Easy Scan you will experience, however, some issues you described, as this behavior with the scanning of the façade, this is a known issue with the software that should be fully updated for Sierra soon, it should be available soon, assuming that during the next weeks to come...

    You can insall HP Easy Scan 1.6.1 below and check if you are able to scan from it:

    Note: If there is already a HP Easy Scan of a previous version icon in the Applications folder, remove and empty the tash first.

    http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/installations/Essentials/HP-easy-scan-1_6_1.pkg

    Then, try to scan using HP Easy Scan and check if it works.

    If the front panel can now list your Mac, it probably, work if not to use the Scan on your Mac software for now.

    Kind regards

    Shloi

  • Still having problems with my perpetual license Adobe CS6 after CC

    Hi everyone, I still have problems with my perpetual license Adobe CS6 after upgrade to CC and terminate my subscription. I did it in October, and of course he had regained all my applications CS6, making it unavailable. I was advised to uninstall my Adobe (CS6 and CC) software and then reinstall my CS6 collection here. I did and as it has helped my Photoshop, all my other apps still get the same dialog box, I received before; telling me to renew my subscription to the CC. It will not happen, all I want is work and back collection CS6. Any help would be appreciated.

    After uninistalling cc, you should vacuum by the use of the Adobe Creative Cloud cleaning tool to solve installation problems, restart your computer and then install cs6.

    you might try starting the vacuum now (to clean the cc) after installing cs6 to see if that helps.

    Open your problematic cs6 programs, and then click Help > activate.

  • Problems with my mini Bluetooth receiver.

    I have a problem with my mini Bluetooth receiver. I just installed Windows Vista 64-bit and downloaded the drivers for the Web site of dell for the configuration of BT, but windows says I have not installed the drivers for the BT family. What should I do?


  • I encountered the problem with the last iOS 9.3.2 update I can't receive call from people, I can call any body, but when l'm calling people any body can ring me just now, I thing the problem where new soft

    I encountered the problem with the last iOS 9.3.2 update I can't receive call from people, but I can call any body, but when l called people any body can ring me only at this time, I think that the problem of the new update. can u check this and answer my question.

    and my phone

    iPhone 6plus

    You see a Crescent Moon at the top of the screen icon? If Yes, disable does not bother to: settings - do not disturb = Off.

  • Downloaded and paid of Minecraft and having problems with Java, Anti Virus Scan and Windows Update - error code 800F081F

    Downloaded and paid of Minecraft and having problems with Java, Anti Virus Scan and Windows Update - error code 800F081F

    Would you advice, thank you.

    Hi Hugo,.

    1. what anti-virus software you have installed in the computer?

    2. What is the full error message/code?

    3. the issue occurred after you install Minecraft?

    4. are you able to play Minecraft without any problem?

    5. what happens with Antivirus and Java?

    Windows Update can occur if one or more of the following conditions are met:

    1. the Windows Update database is damaged.

    2. antivirus software is configured to scan the %Windir%\SoftwareDistribution folder.

    3. the service (BITS) Background Intelligent Transfer Service does not receive a content link header.

    4. a required system file is incorrectly registered.

    5. Windows Installer has encountered an error.

    6. the manifesto of component maintenance (EC) is damaged.

    7. the Windows Update service has stopped during the installation.

    8. a version of the file conflict exists with Windows Update agent files.

    Please follow the steps described in the methods to solve the problem:

    Method 1: We will try the steps from the following link and check the result:

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058?WA=wsignin1.0

    Method 2:

    To correct the errors that occur when you use Windows Update, install, and run the system update readiness tool. The tool analyzes inconsistencies on your computer and fixes as its current installation.

    You can view the following link to download the system update readiness tool and check:

    System tool update that corrects problems of Windows Update is available for Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

    http://support.Microsoft.com/kb/947821

    Details of the event log to find what caused the Antivirus and Java to fail:

    What are the information contained in the logs of the event (Event Viewer)?

    http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

    Hope that the information provided is useful.

    For any help related to this problem or any question of Windows, you can still display in the Microsoft Community Forum!

  • I used to be able to click on the sign in tab + and it should open up a window with my sites most visted. After update now if it opens on a blank page. Why?

    I used to be able to click on the sign in tab + and it should open up a window with my sites most visted. After update now if it opens on a blank page. Why?

    1. In the address bar, type Subject: config and press enter. The subject: config "this might void your warranty!" warning page may appear.
    2. Click on I'll be careful, I promise!, to continue on the subject: config page.

    Then search for the string "browser.newtabpage.enabled" right click, click Reset.
    Also search "browser.newtab.url" right click, click Reset. Restart firefox. Now it must wok

  • When you try to download iTunes I get the following error ' there is a problem with this windows package install a program required for this install complete could not be run.

    Problem Windows install

    When you try to download iTunes I get the following error ' there is a problem with this windows package install a program required for this install complete could not be run.

    I looked at several forums and tried cleaning patches, etc they suggest.  I also tried to download Windows Installer 4.5 but keep says "the update does not apply to my system" (I tried all.)

    I am running Windows Vista and have downloaded the service pack 2 (one remedy suggestions!)  Someone out there has a solution?

    Hello, Atwitsend...,

    Try to repair.
    Go into Add Remove Programs, then select Apple Software Update > change > repair.

    If this does not work, try to uninstall. .

    Remove and reinstall ITunes, Quicktime, and other software components
    http://support.Apple.com/kb/HT1923

    Download the iTunes Installer and save it on your desktop.

    http://www.Apple.com/iTunes/download/

    Try to install iTunes using the installer that you saved.

  • After update for first Pro CC 2015.3 I can not move the values in the effect controls panel

    Hello!

    After update for Premiere Pro 2015.3 of CC, I can't change the value of the property in the effect controls panel by dragging left or right when you move the pointer over the underlined value. The two small arrows appear, but nothing happens when I drag them and it is so annoying. I tried now pressed the SHIFT key and several others trying to drag, but it makes no difference. I restarted the program and my computer but still no difference. All the patches?

    Thank you!

    Premiere.jpg

    Hello Ann,.

    I found the problem, it's my wacomtablet. When I use the magic mouse, it works great! So, I guess I should update the wacomdriver, perhaps. If your response gave me the idea to check for this. Thank you!

  • If connected via Bluetooth with car. Phone starts to compose himself after updating iOS 10

    After updating iOS 10: connection via Bluetooth for car, then phone (iphone more 6s) began to compose himself. My President iPhone which is not longer work well

    Hi Pharao-nael,

    I understand that after update your iPhone to iOS 10, he begins to call itself when it is connected to Bluetooth. I know it's important for your iPhone to work as expected, so I'm happy to help for this.

    Since this occurs only when it is connected to Bluetooth, the first thing you want to do is cancel the twinning of the car:
    Configure and use third-party Bluetooth - Apple Support Accessories

    Turn off pairing a Bluetooth accessory

    To disable the pairing a Bluetooth accessory, tap Settings > Bluetooth, find the device you want to disable the twinning, tap , and then we forget this device.

    When you forget this device on your iPhone, iPad or iPod touch, this accessory is removed from the list of available Bluetooth devices.

    Make sure that your iPhone does not seek to call itself after it is disconnected, and then you can pair the iPhone and the car again:

    Pair your device with a Bluetooth accessory

    1. On your iOS device, tap on settings > Bluetooth. Stay on the screen until you complete the steps to pair your accessory.
    2. Place your accessory in discovery mode and wait until it appears on your iOS device. If you don't see it, or don't know how to make it discoverable, check the instructions that came with your accessory or contact the manufacturer.
    3. Tap your accessory pair. You will have to perhaps enter the CONFIDENTIAL code or password. If you do not know what your PIN code or word password, see the documentation for your accessory.

    When pairing is completed, you can use the Bluetooth accessory with your device. You can pair several Bluetooth accessories with your iOS device. Just follow the steps above to pair additional accessories.

    Thank you for using communities of Apple Support, cheers!

  • Problem with Treo 800w and 2008 Nissan Altima

    I can get my treo 800w for pairing with my 2008 Nissan Altima, he tells me again my battery and the singal strength, I can even answer the calls. But when I answer a call or make a call you can not hear the person at the other end, nor they can hear me. I know that this is not a problem with the car, because the other phones work very well. Please let me know if there is a fix for this or if it's something in the works.

    Thank you

    Rodrigo

    So I went to the dealership and they were basically looking at my like I'm a fool. They said that they could not do the update, because they have never heard of him. I went home and called Nissan Bluetooth support and they told me that I have to buy Navigation DVD 7.4 in order to get the update. The price is $ 299 at the dealer and $190 of navteq. So I asked the guy to support if I buy the drive on mine it will fix my problem, he said no because when you buy the merchant, they will check your system to make sure that it is compatible with the new dvd navigation and perform the updates. I think its crap they have simply not do the update with the charge me for a new navigation dvd. The tech support guy remind me and offered me a work-around to get bluetooth working on the car. This isn't the best solution, but it works. Basically, pair you the phone and make your call. When the call is in course/ringtone, click the button on the screen to switch to your device, that it will be set on your phone. Then click phone on the wheel button, and everything will work correctly. I tired it and it works. This leads me to believe it's a problem with Nissan and not WM, but I'm not an expert.

    Message is about: Treo 800w (Sprint)

  • Problem with the Toshiba bluetooth stack

    Hello, I'm having a problem with toshiba bluetooth stack. I had windows vista installed in my laptop. I decided to upgrade to Windows 7. I got a bluetooth mouse attached to my toshiba bluetooth stack in windows vista. After the upgrade to windows 7 my bluetooth mouse is not working any more and it is not listed in the list of devices. But, when I turn on my mouse, the system battery bluetooth bar turns green as when the device is connected, but it does not work and the device is still not listed. I'm trying to redetect, but it is not detected. I tried to uninstall and reinstall the bluetooth stack, but in the reinstalling my devices are always listed.

    Can someone help me or tell me how to manually remove all connected devices? Thanks in advance.

    You have selected the option to remove all device configurations?
    If not, then please try it and then reinstall the Bluetooth stack.
    You can also do this via command line.
    Just run the following command as an administrator:
    MsiExec.exe /x "{CEBB6BFB-D708-4F99-A633-BC2600E01EF6}" / qn DELETEALL = 1

    In addition, remove the batteries from the mouse for several seconds.

    Right click on the Bluetooth system tray icon > Options... > Security > view paired devices
    Remove your entry for the mouse device when it exists.

  • Problem with the adapter Bluetooth Logitech speakers on Windows 8

    I use Windows 8 Pro, but I had the same problem on the consumer Preview (some things are different now though)

    I use a Dell Inspiron N5010 laptop with a Dell Bluetooth 365 module.

    When I first install the Adapter Bluetooth Logitech speaker it works fine (there is no driver for it but windows installs the driver of basic ad2p). The problem I have is that after the computer sleeps, stops, or restarts the unit is unplugged (as expected) and I can't reconnect (only to remove the device and install again).

    In Windows 8 Preview of consumption when the device is plugged in, I could separate and connect it to the sound settings, but it would vanish from the sound after a sleep settings, reboot or shutdown.

    I could easily connect or disconnect the device by double-clicking its icon in devices and printers in Windows 7. If I do the same thing in Windows 8, an error saying "BTWuiext has stopped working".

    So basically after every sleep, closing or restarting I remove and reinstall the device...

    I also tried troubleshooting of devices and printers, and I checked that Bluetooth Service is running.

    Any help is greatly appreciated! Thank you.

    Hi radufly,

    Thank you for writing to Microsoft Communities. From your problem description, I understand that, after every restart, sleep or a stop, you need to reinstall the drivers for your device. Please correct me if I misunderstood.

    I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

    radufly, it seems that the device is not compatible with the Windows 8 environment. I recommend you to contact Logitech support http://www.logitech.com/en-us/support/support-contactus and check with them if they came with drivers for Windows 8.

Maybe you are looking for