Problems with Recovery Manager and wireless

Hey everybody,

I have an a HP Pavilion dv7-1245dx with Vista 64 bit.

My HARD drive crashed after that the computer was hit. I bought a replacement hard drive, but could not use the HP Recovery Manager because my recovery disks were lost when I recently moved into a new House.

I managed to get the Vista desktop of base up and running again, but without video card or wireless capability. To resolve this problem, I tried to re - install my drivers for hardware manually via

http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2100&LC=en&cc=us&DLC=en&sw_lang=&product=3860...

However, whenever I try to install Recovery Manager, I get say an error message: "this Setup program cannot be installed on this system, Installation with abandon!" InstallShield.

Also, I tried to download and install all drivers wireless on the HP site, but I can't always operational wireless capability. Even after that I installed all drivers, Device Manager still does not recognize the wireless device.

Any thoughts on solutions to these problems? Buy the HP recovery disk or install a new operating system Windows 7 would help solve these problems? Is it possible any other hardware become damaged when the computer was hit, and that is what causes these problems? Thank you.

-NDEco

Vidya,

This problem solved-I had the drivers for the wireless and then updated the rest of the material from there. Thanks again for your help!

-NDEco

Tags: Notebooks

Similar Questions

  • Problem with Recovery Manager (recovery failed)

    Guys, I can't successfully complete my system recovery.

    Here is a detail of the event-by-event (I have a Pavilion DV5):

    -J' have Complete Recovery (recovery is complete appears...) "once the system reboots and you're done the first... »)
    -I restart
    -CMD.exe window appears
    -Software Installation HP window appears
    -It restarts, a black window with HP Logo, and then Microsoft Corporation (from windows)
    'Please wait while Windows configures your computer' (black screen)
    -Please wait while Windows continues installing the computer (blue screen)
    -Restarts again
    -black screen, mouse, windows logo appears, its beginning (home screen appears... Vista Home Premium)
    -Windows installation window... "Windows is now put in place the following:"
    Pre-PININST (check)
    Preinstall the installation software
    Pre-PININST2
    Preinstall the Software Installer 2
    Post PININST
    Check the power supply
    BurnBoot

    (All this with HP on the screen back with the gray validation bar)

    -Takes a long time to complete the second task (Preinstall Software Installer).
    -Restarts (disconnection, closing...)
    -New black screen, white pointer
    -Windows 'Welcome' screen again

    Now, when it is in the "Windows is now put in place the following:
    Pre-PININST2

    A Recovery Manager window appears saying that "the recovery attempt failed. Please select one of the following buttons:
    Constituent parts or try again

    When I hit the details, there are the following:
    -ChkErrBB.CMD: Detects an error in the PININST-PBO.
    -ChKErrBB.CMD: Check C:/system.sav/logs/BurnBootWarn.log

    I hit retry and the open CD and she has restarted the machine

    And once again returning to the "Welcome to the Recovery Manager" screen of origin.

    How can I solve this?

    Thank you

    I found far in front of her. Close the window with the 'X '. Do not hit try again or he'll just keep again. The box a few times during the process, but just keep hit X and it must cross. Worked for me!

    I don't know if there are features or missing files because of the errors, but the system seems to work very well so far.

  • Strange problem with call manager and call before all

    Not sure whether this post about unity for or CCM. I will post on both. I have a main number customers dial in. When they call this number and they do not get a response, it passes to a call handler. This call handler has an option of entry of the appellant 3. If they hit option is three transfers to an IP phone on Call Manager who is assigned to the CFA for this cell phone to people. Everything works except when the call is sent to the PSTN it sounds for time and then disconnects. This number can be called directly from the system with no problem. The cause of the disconnection on debugging is the following: because I = 0x80FF - error of interconnection of networks; not specified. Please help if you can.

    I assume you are using version transfers here. You can give it a whirl with supervised transfers?

  • Satellite 1110-Z15: problem with Recovery CD and DVD player

    I currently have a Satellite 1110 model number PS111E-006R8-EN/S1110-Z15.
    But a few weeks ago, my DVD Rom drive no longer works, it would not run properly when a cd is inserted it kind of Jolt and then arrested and continues to do the same. Anyway to cut a long story short, I tried to rebuild the system by using a version of windows xp that has been successful, it is now, I found the original recovery disks, but without using the cd drive inward, I had recourse to an external cd drive freecom, I hold the c key at startup , but nothing happens, can anyone help emergency
    PS: I made the changes in the Bios to boot from the cd drive

    Hi nichollsr,

    in our society, we have 2 Satellite 1110-Z15, and there is a delicate hint for recovery.

    Toshiba has made a small mistake and printed the wrong order on the CD. You only need to change the order of the Recovery CD. No.. 1 is no. 2 and vice versa.

    Insert the diskette n ° 2, hold down the 'C' key and the recovery is expected to begin. If your laptop does not identify external drive-Freecom CD try to hold the 'U' key to boot from USB.

    I found a FAQ on the site of Toshiba UK

    http://UK.computers.Toshiba-Europe.com

    You must click on Support / download, then to the knowledge base and search for a called FAQ

    'TIU0000002559 '.

    There is a detailed explanation of this issue.

    Goodbye, TOK

    PS: Do not forget to reward points, I'm a Pointcatcher!

  • Problem with Media Manager and resolve blackBerry Smartphones

    My old computer died and I bought an Acer Aspire one (mini laptop, a bit like a netbook) and the resolution is not sufficient to run the Media Manager. I need to be able to transfer files (specifically of word, excel and power point) to my Storm. Can I get the media manager? Or do I have to find another way to transfer files (and how I do that)?

    Thank you

    Hi and welcome to the forums!

    You can use a PC for the transfer of information between the PC and the media card.
    Basically you focus for the BB and PC USB. Don't use office
    Manager. Go to 'My Computer' on the PC and the BB will be displayed as a flash drive.
    Then you can "drag and drop" files on the BB.
    Use the following settings in the option of memory of the storm:

    Card support ON

    NONE encryption mode

    (Storm AND "BOLD" only) Media Transfer Protocol

    WE support mass storage

    Auto enable mass storage support when it is connected TO

    Thank you

    Bifocals

  • Satellite Pro C650D - problems with the audio and game controllers

    Hello

    I recently had problems with my microphone and speakers/headphones and game controllers.
    Sometimes the microphone stops working when on Skype, for example, but most of the time works fine, once again, when I restart the pc.

    Stakeholders sometimes still work when I connect headset.
    Some of the sounds are still coming through the speakers while some coming through the headphones.

    I have a usb game controller which also did not work everything properly.
    If I assign buttons in the program that they do not work in the game.

    All these devices are in Device Manager in a group that makes me think it's sort of annoying update doubtful that messes with them.

    Any body have similar problems or know what to do better?

    See you soon
    Laurin

    Hello

    Can you please send some details on the laptop model and the system you are using?

    With regard to the issue of sound/mic:
    > The microphone sometimes stops working when on Skype, for example, but most of the time works fine, once again, when I restart the pc.

    Are you talking about internal microphone or external? This only happens using Skype?
    In your case I would test the microphone using different applications to make sure that is not a Skype related issue.

    > Yet sometimes the speakers work when I connect headset.
    I recommend this thread:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=65295

    The user has had a similar problem, but this phenomenon was linked to the Realtek HD Audio Manager settings.
    She wrote:
    + In the upper right corner, there is a small yellow folder called "Connector settings" in my version. +
    + There, finally I could re-enable the setting "enable popup dialog box, when the unit is plugged. +

    + So now when I plug an external speaker or headphones, it appears, and I select the option "helmet" (instead of "line-in"), and then the sound only through the headphones/ext.speaker.+

    Regarding the game controller:
    > I have a usb game controller which also did not work everything properly.
    > If I attribute buttons in the program, they do not work in the game.
    I put t think its problem of laptop in my opinion, you must make sure that the controller is compatible with the games you play and also recommended to check some info provided by the manufacturer of the game controller.

  • Satellite C655D - problem with recovery

    Hello
    I have the Satellite C655D-S5515 with no additional DVD.
    I want it back or fabric.
    When, during boot press 0, not getting no RECOVERY option not only choose the operating system (Windows 7 only).
    How can I make laptop recovery?

    At first, I must say that since a long time, Toshiba and many other manufacturers of laptop also, doesn t offer disk facility with new laptops. Recovery image is saved on the HARD drive and the laptop owner should create backup recovery, recovery media creation. Its operation is clearly described in the document s user manuals.

    In General, when your laptop has a factory settings and changes nothing, you should be able to begin the installation of HARD drive recovery. I don't know what the problem with your machine and what is the reason why this option is not available, but what you need now is the installation of recovery disc.

    If you don't you should be able to order it. For making this visit https://support.toshiba.com/repair?orderType=SFF

    Good luck

  • Problem with access point or wireless adapter

    Hello world

    tried to connect to my WiFi, but the convenience store detects that the problem with access point or wireless adapter.
    The drivers are up-to-date and functioning normally. There were discussions on BIOS but I don't know if I would be able to complete the task without bricking your laptop.

    Is there any online support?

    Hi smert

    Your message is not really useful.
    Why? Because no one knows all the details of the laptop, wireless network card system...
    So please would you be kind enough to provide more details.

    But despite the missing information, I recommend:
    (1) reset your router WLan
    (2) check the connection to the WiFi unsecured. (of course for testing purposes)
    (3) check the different (WPA/WPA2 AES, TKIP) encryption

  • HP 650: Problem HP Recovery Manager

    Hi all,

    my laptop HP 650 with Windows 8 sudenly crush and after traing to restart with HP Recovery Manager

    everything went well until the last step. I got message of support on the last window to restart but after that

    start the laptop and reboot is already long of 6 hours. All I have on the monitor is HP logo and points running and turning

    during the past 6 hours. Thank you in advance for answering. Sorry my English...

    Nooteboom 2013 manufactured and before.

    Thanks TI WinSec for your efforts and useful tips.

    good news is that I managed to reset the phone to factory settings and the bad news is that I have I lost my files (video, documents txt,...)

    nothing to importanat but...

    I have tried to update Windows but received message that C: drive is lock. ???

    After that, I tried to reset it to the previous point, 26.08. but everything went well until the end, when I received the message that the point has been restored and when I was invited to click on the window to restart, he worked day and night until morning without success.

    So finally I did system restore with HP Recovery Manager and when am message to back up my files, any files not detected

    on the C: drive. ???

    So I did the factory reset process and everything went well, got my HP to service.

    Thank you once more, thanks for all your advicess.

  • HP 15 laptop: problem with the touchpad and the key "stuck."

    Hello!
     
    Last weekend, I have an irritating problem with my HP 15 laptop. Bought two years ago and upgrades to Windows 10 a year ago.
     
    First of all, my touchpad started to not work properly. It "freezes" and I can't use it until I click the ESC key, but it doesn't last and "freezes" again a few seconds later. Then, everytime I open a window where there is a text box (Start menu, edge browser, Control Panel, etc.), the number 5 is entered automatically and permanently, as if the button 5 has been blocked. I did a quick check and button 5 do not seem physically stuck.
     
    Yesterday, I restored the system to the factory settings, so I'm back to 8.1 for Windows and then upgraded to Windows 10. Everything seems to work fine, but this morning, the problem was back. Is there something I can do? What is the problem caused by Windows 10 or the computer? Should I restore it to Windows 8.1? Everything worked great til last weekend, I don't know what that was.
     
    Thank you in advance for your help!

    Welcome to the HP support community @gouch3.

    I understand that you have a problem with the keyboard and the touchpad on your laptop from HP 15.

    Have you tried to use a keyboard external and mouse at all?

    Have you tried to go to Safe Mode to see if the problems persist in there?

    Have you tried to perform a material or forced reset Reset?

    Did you do a test of material?

    Have you updated your drivers?

    gouch3 wrote:

    ... Is there something I can do? What is the problem caused by Windows 10 or the computer? Should I restore it to Windows 8.1? Everything worked great til last weekend, I don't know what that was.

    It could be a driver problem to be able to look at that for you, I need your model number. I wish I could give you an answer or not, but at this point without the troubleshooting results and the model number, it is difficult for me to say.

    I can say that if everything works in point 8.1 of Windows without problem, the driver TROUBLESHOOTING is a great place to start. Please try to follow these steps for the keyboard and the touchpad of troubleshooting:

    • Beginning
    • Search for Device Manager
    • Search results, open Device Manager.
    • Click on display
    • Show hidden devices.
    • Click the arrow next to keyboards.
    • Right click on the name of the keyboard device.
    • Select uninstall.
    • Continue deleting the names of devices in the category keyboards until the feature of all the names have been uninstalled.
    • Restart the laptop twice.

    Touchpad:

    • Type of research, "Device Manager."
    • Click on Device Manager,
    • Expand mice and other pointing devices.
    • Right click on the TouchPad,
    • Click on uninstall.
    • Restart the computer laptop twice,
    • Reinstall the TouchPad card.

    I found a document of troubleshooting for you to try also called Portable keyboard troubleshooting. Please be sure to follow the steps described in this document.

    The best document I have for TouchPad problems is the use and troubleshooting of the TouchPad and ClickPad document. 

    Here is a link to the HP Support Assistant, if you need it. Just download and run the application and it will help with the software and drivers that need to put up-to-date.

    This is a great question other clients may also be questioned. When we came to a resolution, please share what has worked for you with others by marking this post as an acceptable Solution. If you want to show appreciation for my efforts today, please take a second to click the Thumbs Up button below.

    If you need assistance, I would be more than happy to continue to help you. Please re-post with the results of the resolution of the problems. Could you please also provide your model number (How can I find my model number or product number?)

    Thank you!

  • Problems with my mouse, and have not been able to find a solution to the research on various forums.

    Original title: mouse problems

    I have problems with my mouse and have not been able to find a solution to the research on various forums. Here are the symptoms:

    1. you must click several times to get the menus to open. Sometimes they are not just and sometimes they open with a single click flash but do not stick until I clicked several times.

    2 several times the menu drop down and seem to become transparent (not in looks) because when I click on something on the menu, he actually selects everything that is behind the menu drop down. For example, if I'm in powerpoint and you select an item in edit mode, it might work and here again he can just select the slideview behind the menu and expand. Or well, if I'm on a Web site, such as Facebook, and I chose to close the session, rather than enable the disconnection of the key, he chooses some ad is behind the part of the menu and redirects the page of this Web site.

    3. when I try to select a Word, words or sections as paragraphs, it performs several different things: continually select as soon as I let go of the mouse button, the jumps of color selection in another part of the document, or deselects the part of the text before I even let go of the mouse button.

    Here is what I tried:

    1. I had originally a usb wireless mouse. I changed the batteries and then got a new. Now I use a wired mouse.

    2 make sure all updates for Windows and Office 2010 are updated.

    3 has tried to update the drivers mouse, says that it is up-to-date. He restored, did not work. Uninstalled and restarted.

    4 Ran Windows Security Essential and Malwarebytes - found nothing.

    5. ensure that all the Toshiba updates were up-to-date.

    I don't know how the word this issue properly in order to find information about it. Everything I typed in search engines brings me other problems unrelated to this one.

    I am running W7 64 x Home Premium SP1, SP2 MS 2010 with a mouse Dell; Toshiba Satellite C655

    Well I have stumbled on the fix... looks like there was a problem with the HID-compliant mouse. The convenience store hardware detected and solved the problem. Everything seems to work properly again.

  • Photoshop elements 13 said that there was a problem with the download and recommend exit us and restart

    We bought a new laptop and 13 items today. We spent the day trying to get it set up. We tried to download the 13 items at least 6 times. Whenever it took about 45 minutes to download, but when we open the file and click on set up it says that there was a problem with the download and it recommends that stop, restart and download it again? How we work what goes wrong? We had to remove the files and start every time. I don't have another day to try to get this sort. Should not it is just a matter of downloading and then, should not come with a message to install and we just press Yes and it works.

    You can also download the trial version of the software directly (No Download Manager) through the page linked below and then use your current serial number to activate it.  You should get two files, an executable file and a compressed file.  Run the executable file and it will install the rest.

    Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

    Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

  • Problem with Lifedrive Manager on a Machine MS Vista

    I used my Lifedrive for a long time since a MS Windows XP Home Office successfully.  This summer, I got a new laptop which has Windows Vista Home Premium.  I am able to use the Palm Desktop software and hotsync for the XP desktop and laptop of Vista.  I am, however, problems with Lifedrive Manager.  Whenever I start the laptop, I get a message that the machine could not initialize "PalmOneRemoteLibrary."  I ignored the message because I could do everything I needed up to today.  When I tried to start the LifeDrive Manager (impetus provided by a message that asked that I install my photos using LifeDrive Manager), I got the PalmOneRemoteLibrary error message.

    I realize that this machine can be a relic, but I really like it, and I did a lot of use of it.  My LifeDrive machine runs Palm OS Garnet 5.4.8.  I recently put a mass of images on the internal drive using 'Training Mode'.

    Am I correct the LifeDrive Manager is inevitably incompatible with Windows Vista, and which is the source of my problem?  Any difficulty that I could try?  Any other ideas?

    Hello blue8star and welcome to the forums of Palm.

    The LifeDrive Manager application, unfortunately, is not compatible with Windows Vista.  Palm said they aren't going to release a update for the abandoned PDA.  (By the way, I have a palmOne LifeDrive and always use it often.)

    To load on the LifeDrive bulk data, you have the right idea, use the Drive Mode.

    Alan G

    Message is about: Treo 755 p (Sprint)

  • Problems with multiple framerates and Blackmagic Decklink 4 K Extreme reading

    Recently, I exchanged by AJA Kona card for extreme Blackmagic Decklink 4 K in order to get external followed in DaVinci Resolve.

    I work in a 1080 p 23.976 project that includes a 29.97 SD and HD images. Loading these images of 29.97 FPS in my layer source footage, I meet regularly with frozen reading (the triangle of game in my toolbar becomes a symbol of the square and stays that way). From there on, I am unable to playback images in any scenario and requires a complete closure of the system to return to normal! The problem is apparently BOUNCING, with successful reading happening sometimes.

    Images of 29.97 was DVCPRO, I tried to transcode to Prores to solve problems. No dice. I think it's a problem related to the inability of the Decklink to manage several rate display on the fly, but wanted to present here, too. I also experienced delays intermittent sync on my monitor.

    DeckLink driver 10.0

    First CC 7.2.1

    Mac OSX 10.9.2 (mavericks before the same problem)

    Hi Andy,.

    You should not have problems with Blackmagic manage several formats on the fly. However, I believe that the problems of reading frozen that your description is related to the Desktop Driver video 10. I suggest rolling back to 9.3.3 for now. Blackmagic now turns on this issue.

    Best,

    Peter Garaway

    Adobe

    Premiere Pro

  • Hello I have problem with my site, and mozilla. Google chrome, safari, explorer, opera work ok. Mozilla Heve problem with images?

    Hello I have problem with my site, and mozilla. Google chrome, safari, explorer, opera work ok. I have Sobipro for both the company and the logos and images without work!
    When I try to open the url is this:http://www.athens-dayandnight.gr/images/sobipro/entries/288/587_img.jpg

    whith mozilla is the following: /images/sobipro/entries\288\587_img.jpg when ichange it------with this / work.

    any idea?

    Thank you

    Hello, the URLS that contain-in their path are not valid. Firefox is less tolerant to errors in this respect than other browsers.
    Correct the path to http://www.athens-dayandnight.gr/images/sobipro/entries/288/587_img.jpg in the source code of this site or if you don't control the contact of the site their webadmin to do...

Maybe you are looking for

  • Why no words in iOS 10 music app?

    OK, iOS 10 is officially released and NONE of my songs (which were ALL words, previously displayed in iOS 9) display of the lyrics in the music app. ... and I noticed something new in iTunes 12.5.1.21... When I look at the lyrics of the track tab in

  • Satego P100-10U - driver with Windows 7 problems

    Hello! Also recommended by Toshiba, I installed Windows 7 64 bit on my laptop for Satego P100-10u. However after doing that I encounter the following problems:-There is no noise even if the audio device driver (Conexant high definition Smart Audio HD

  • Third-party tool to draw the rectangle on the block diagram

    I know he was once a third party tool that allowed me to draw a rectangle of Nice double border on the block diagram.  Yes, it's the not the front panel block diagram.  It was very useful to make annotations and designating functional groups.  Does a

  • Cannot install HP Deskjet 6988

    I just bought the thing and when I put the CD to install the software it gets to the point where it looks for updates, and then it says that the plugin Installation of HP must be closed. What I am doing wrong?

  • Windows update error 800705B 9 tries to install the client update

    Try searching for updates using windows update, he invites me to install new windows update client software and close and reopen this.I click on install now It closes and after 20-30 seconds, it appears with windows not can find new updates with erro