Problems with sound after installing Vista Ultimate SP1 on HP Pavilion Dv4

Similar Questions

• problems with sound after installing windows 7

  My sound/audio does not work on my HP Pavilion dv2023tu notebook after a clean installation of windows XP.

  The convenience store said there is a problem with the driver, but I can't find a new driver through windows update, and HP does not either for my model. The device installed on my laptop is called high definition Audio Device. Can anyone help, if not, where can I download the drivers from. It is better to buy driver update software to help locate the right driver?

  Hello

  A lot of Vista for Windows 7 drivers, so try the following.

  Download the Audio driver from the link below and save it to your desktop.

  FTP://ftp.HP.com/pub/SoftPaq/sp34001-34500/sp34387.exe

  Once the download is complete, right-click on the Setup program and select "Run as Administrator" to launch the installation.  If the driver installs successfully, restart the computer and check your audio files.

  Kind regards

  DP - K

• Satellite U200-141: problem with drivers after installing Vista

  Hi all

  I just installed Windows Vista, and I'm having some problems:

  1. shortcut keys do not work (Fn + F1, f2, f3, etc does not at all).

  2 Touchpad - I have already installed driver listed it under Vista, but although I can use the touchpad, normally when you point, rattling, etc., I can't scroll. I mean, I can't set up the scroll area (it has been the right corner to scroll vertically and bottom to scroll horizontally). I checked the options of auto-scroll on IE and Firefox, and it does not work here.

  3. I don't seem to be able to install the new BIOS.

  4. the internet, play, pause, stop, etc., (embedded) buttons do not work either.

  5. I have the product recovery CD but this is for Windows XP and I don't know how to install the drivers to go from there.

  I'd appreciate any help anyone could provide.
  Thank you.

  You cannot use the notebook unique features because you have not installed the drivers VISTA required.
  And you can not install Vista drivers Vista drivers are not available at this time

  So what to do? Either you use the Vista without the additional features like buttons etc. or you use the supplied recovery CD and install XP

• problem with sound after installing windows 8.1

  Hi, I have dell vostro 1400 and I installed windows 8.1 a few days before and since the sound does not work in my machine! tried to uninstall the audio and installed again, nothing... set driver update audio driver... nothing as well, even I uninstalled windows and installed again, but no sound comes out, any help please because I'm depressed and don't know what to do?

  THX

  Hi nashnash15,

  I checked the system specification and supports Vostro 1400 are Windows XP and Windows Vista 32 Bit operating system. However, this system has not been tested with Windows 8.1 and would usually rely on generic drivers of windows updates.

  If in cases that do not work, you may need to return to the old operating system.

  Let me know if you have extra help.

• After installing Vista Ultimate, thinkpad r61 connection Wi - Fi doesn't work do not

  installed vista ultimate, now Wireless does not, ethernet not tho, thinkpad r61, had professional vista prior to upgrade, wireless worked fine, wireless adapter: wifi link 4965 AGN, yes a driver updated, done Yes ms dignostics, 1 other thing tho, cannot turn on the wireless radio.

  Wireless connection not working do not, after installing windows Ultimate edition, may depend on a wireless radio.

  Disable anti-virus and firewall (for now) and check if it's anti virus causing the problem.

  Another thing, you can try:

  Uninstall the card drivers wireless network from the Device Manager , restart the computer and let the operating system to install the generic drivers.

  Wireless works fine now?

  Now, visit the support IBM (drivers and downloads) page, enter your model number and download the drivers wireless on your desktop.

  FYI, here is the link:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-67856

  Install the drivers in administrator mode.

  P.S Make sure wi - fi on the laptop button is turned on...

• No led lights after installing Vista Ultimate

  Hi all

  a just installed Vista ultimate on my laptop and now the led lights on the keyboard doesn't light up

  Any ideas as to why?

  Dear Claire

  You have installed all the drivers, Toshiba tools and utilities for your laptop model?

• Problems with sound after you install the operating system

  I have a compaq presario that originally vista os, the system crashed and I could get the recovery work so I installed windows xp and now I'm having problems with the sound. What should I do? I tried to locate the drivers requarding info. I keep getting error messages indicating that I have no audio device. Is it possible to go back to vista? I don't have an instillation cd or recovery for vista cd. Any help would be great.

  Hello

  Go to the link drivers HP > search your computer number model > XP OS > download and install the audio drivers.

  http://WWW8.HP.com/us/en/support-drivers.html

  If no audio driver XP is available, HP provides them.

  Through the installation of XP, you have destroyed the provided HP recovery Partition Vista to reinstall Vista:

  Solve a common problem of recovery with the HP Compaq computers.
  If the original operating system is changed to a non - Vista OS, the Recovery Manager cannot be started from either the desktop or by pressing f11 at startup. You can use the recovery disk to restore the computer to the original state of Vista. If you are using a non - Vista OS, you can use a third-party partition management program to recover hard disk space.
   
  Contact HP and ask them to send you a set of Vista recovery disks.
  Normally, they do this for a small fee.
  http://h20566.www2.HP.com/portal/site/hpsc/public/help/contactHP/home/?AC.admitted=1340446095470.876444892.199480143
   

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Re: No sound after install Vista - Tecra M7

  I improved my Tecra M7 to Vista (and then upgraded to Vista SP1) but the computer is no longer plays sounds (no music, no sound system - nothing)

  I installed the latest Realtek HD driver, I have the latest version of the Bios.

  Device Manager indicates that everything is working. "Speaker" icon tells me that his work (the green bar follows the beat of the music)

  The volume & button Mute works - I can't get the "speaker" modifying, turning to the top/bottom/inhibition icon. I tried the headphones in and out.

  I checked the bios if the sound card has been disabled it - but it seems that there is no possibility to change the settings of the sound card in the bios.

  Does anyone have an idea on what I'm doing wrong here?

  Maybe I can help you;

  I read on a sound problem after installation of Vista it happened if XP was preinstalled on your laptop and the mute box was accidentally activated.

  [No sound after upgrading to Windows Vista: http://aps2.toshiba-tro.de/kb0/TSB7C021B0001R01.htm]

  Check the Toshiba TSB article tool

  Concerning

• Satellite M60 - BK3: cannot get sound after installing Vista

  Hello

  I installed Windows Vista Ultimate (32 bit) on my Toshiba Satellite M60 - BK3, but I can't not all sounds is the correct video settings. I searched on the internet and it seems that this family of satellites is not supported to be upgraded to Windows Vista: S

  Does anyone have an idea of how get these drivers to make my laptop works fine with Vista?

  Thank you.

  Rodrigo

  Hello

  This Satellite M60 - BK3 model does not work for me. Where did you buy it?
  Try to install a hardware diagnostic tool to know what sound chip and the graphics card supports this laptop.

  You can download the drivers from the part manufacturer's website.

• Satellite A120: No sound after install Vista

  Hello

  I was handed a second laptop to work - so not sure if the sound is already working but...

  (1) I installed Vista Business Edition
  (2) no sound through the speakers or headphones
  (3) no error in the Windows Device Manager.

  -Reinstalled the Realtek drivers on the site of pilots tosh
  -
  This is updated from windows
  -
  -During playback of an audio file, that the graphic equalizer appears normally - that is bouncing up and down with the beat

  Now of ideas!

  Thanks in advance!

  Hey Buddy

  I think I know what could be the problem.
  The sound should be set as high as possible before the installation of Vista!

  In addition, you should check if the sound wasn't mute runig the previous operating system.
  This may affect the sound on the new Vista operating system installed!

  I searched a bit on sites Web of Toshiba and the Central knowledge and found this useful article about the problems of sound on Vista OS

  [Its utility to turn Mute Off | http://support.toshiba.com/support/viewContentDetail?contentId=1671893&pf=true]

  I would appreciate any comments from you

  Concerning

• No sound after installing Windows 7 SP1 on Dell 15 (1564)

  Hello

  I had to make a clone of my HD that came with the machine almost died - the system did not start as it was too busy to work with bad sectors. The new clone has worked well, except no sound. I reinstalled all the drivers, including the chipset Intel HD Audio and Realtek Audio card drivers, but no go. Even video drivers AMD drivers LAN, card reader drivers, I reinstalled everything but nothing worked. I finally deleted the Windows 7 SP1 installation, and all of a sudden, everything works fine! I reinstalled the version SP1 with a new copy of the Microsoft site and again the sound disappears. When I go to system information, audio devices are no problem. Windows and Dell own troubleshooting finds no problem. The Realtek speakers are set by default (tried deactivating and reactivating, but did not work). The only point where reviews of windows without the audio is generated when I go into the settings of the speakers, select the speakers (only option is stereo) and click Test, the system claims that the sound could not be played. Am I doomed to Windows 7 which can never be updated for SP1?

  Note also that I can't go back to the factory because settings that the cloning process deleted the hidden partition. Also, I never had the drives installation or repair for Windows 7, so that option is out as well.

  What, in the Windows SP1 could cause the noise problem? I realize that since the Audio worked fine before cloning in SP1, the question must be with the architecture of Windows, but why the sound will return when I uninstall SP1?

  Anyone have any new ideas?

  Such problems are common with factory settings which have the pre-installed drivers, as well as pre-installed software.

  Windows 7 Service Pack 1 contains a number of drivers which adequate conflict with the pre-installed drivers. So you reduced the (likely) bad audio and video performance may be bad.

  You can try to uninstall audio and video drivers to uninstall Windows 7 Service Pack 1, then go to uninstall or change a program and remove any audio or video software. Also to uninstall the drivers from Device Manager and then install Windows 7 Service Pack 1, and then the drivers.

  It would probably be better if you just clean installed with media that contains the Service Pack 1 and then install system drivers in the correct order.

  Follow the Windows reinstallation Guide / A clean installation of Windows 7:

  http://philipyip.WordPress.com/Dell-community-forums/

  It will tell you how to download a Windows 7 with Service Pack 1 installation .iso, create a bootable USB, backup product activation and clean install of Windows 7. This should give optimal performance.

• Problem with wsconfig after installing APSB07-02

  After installing the patches on APSB07-02
  I get this message?
  "Servers JRun (s) found on host 127.0.0.1 should be upgraded to use this version of the web server configuration tool."
  
  It is an own CF MX 7.02 in multi server, jrun update 6 installation, all the patches of jrun since updater 6
  
  TIA

  I found the problem, it is with the 62070_64614.jar hotfix

  http://www.Adobe.com/cfusion/knowledgebase/index.cfm?id=f9db1285
  JRun 4 Updater 6: fix for remote transactions

  Add each hotfix one at a time and it broke all.

• Problems with sound after recording project and reopen it first elements 13

  I am a new user of Premiere Elements. It runs on a PC Pro Windows 8.1. Everything going well until I'm not closing the pragram. If I save a project, close the program and re-open, audio files (any type) can only be heard on the left speaker. If I double-click the audio (audio tool opens upwards) I can see the left and the right lane and it seem okay, but in the draft, I can not both speakers to work. Burning of the project or making changes nothing. All other software is running okay, i.e. None of the problems of sound. Either it's a bug or it's sth. in the settings.

  The sound chip is a RealTEch High definition audio on an Asus motherboard. Any help is very appreciated.

  Thanks in advance!

  Finally, what helped was uninstalling the realtech High Definiton Audio Driver and re-install the same version.

  It is not sensible, but it worked.

  Thanks for the support everyone.

• Satellite P100 - no sound after installing Vista SP1

  The machine is a Satellite P100 just more than a year, came with Vista installed. No problem until today when Vista SP1 has been automatically downloaded and installed. Now I have no sound from speakers or headphones.

  I've uninstalled and reinstalled the driver Conexant Audio Hi-Def to the latest recommended on the Toshiba site.

  I tried to restore to before the time when SP1 was installed.
  I updated the BIOS to the last on the Toshiba site.

  I pulled my hair.

  Someone at - it any other suggestions?

  It s certainly a useful information. Thanks again!

• Problems with sound after loading Windows 7 Ultimate

  I just loaded Windows 7 ultimate on my HP Pavilian m7100y.  I have no sound, the monitor is an HP vs19c and trendy top speakers.  Can someone please.

  Hello:

  See if this driver works...

  Accept the agreement, download and install the first driver on the list if you have installed W7 32 bit, second driver on the list if you have installed W7 64-bit.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=24&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false