Problems with sound after loading Windows 7 Ultimate

Similar Questions

• problems with sound after installing windows 7

  My sound/audio does not work on my HP Pavilion dv2023tu notebook after a clean installation of windows XP.

  The convenience store said there is a problem with the driver, but I can't find a new driver through windows update, and HP does not either for my model. The device installed on my laptop is called high definition Audio Device. Can anyone help, if not, where can I download the drivers from. It is better to buy driver update software to help locate the right driver?

  Hello

  A lot of Vista for Windows 7 drivers, so try the following.

  Download the Audio driver from the link below and save it to your desktop.

  FTP://ftp.HP.com/pub/SoftPaq/sp34001-34500/sp34387.exe

  Once the download is complete, right-click on the Setup program and select "Run as Administrator" to launch the installation.  If the driver installs successfully, restart the computer and check your audio files.

  Kind regards

  DP - K

• problem with sound after installing windows 8.1

  Hi, I have dell vostro 1400 and I installed windows 8.1 a few days before and since the sound does not work in my machine! tried to uninstall the audio and installed again, nothing... set driver update audio driver... nothing as well, even I uninstalled windows and installed again, but no sound comes out, any help please because I'm depressed and don't know what to do?

  THX

  Hi nashnash15,

  I checked the system specification and supports Vostro 1400 are Windows XP and Windows Vista 32 Bit operating system. However, this system has not been tested with Windows 8.1 and would usually rely on generic drivers of windows updates.

  If in cases that do not work, you may need to return to the old operating system.

  Let me know if you have extra help.

• Problems with sound after installing Vista Ultimate SP1 on HP Pavilion Dv4

  I lost sound after installing Vista SP1 Ultimate on my HP Pavilion Dv4... everything was fine before. Help, please.

  Go to the HP support website and search for Windows Vista drivers for your specific model number. Also look for recent updates, even if your PC comes with Windows Vista preinstalled.
  http://welcome.HP.com/country/us/en/support.html

  If there are Vista drivers then download to a folder on your hard drive and install all of them, starting with the installation card mother/chipset drivers, then the SATA, LAN, Audio, drivers and other device drivers.

  J W Stuart: http://www.pagestart.com

• Problems with sound after you install the operating system

  I have a compaq presario that originally vista os, the system crashed and I could get the recovery work so I installed windows xp and now I'm having problems with the sound. What should I do? I tried to locate the drivers requarding info. I keep getting error messages indicating that I have no audio device. Is it possible to go back to vista? I don't have an instillation cd or recovery for vista cd. Any help would be great.

  Hello

  Go to the link drivers HP > search your computer number model > XP OS > download and install the audio drivers.

  http://WWW8.HP.com/us/en/support-drivers.html

  If no audio driver XP is available, HP provides them.

  Through the installation of XP, you have destroyed the provided HP recovery Partition Vista to reinstall Vista:

  Solve a common problem of recovery with the HP Compaq computers.
  If the original operating system is changed to a non - Vista OS, the Recovery Manager cannot be started from either the desktop or by pressing f11 at startup. You can use the recovery disk to restore the computer to the original state of Vista. If you are using a non - Vista OS, you can use a third-party partition management program to recover hard disk space.
   
  Contact HP and ask them to send you a set of Vista recovery disks.
  Normally, they do this for a small fee.
  http://h20566.www2.HP.com/portal/site/hpsc/public/help/contactHP/home/?AC.admitted=1340446095470.876444892.199480143
   

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• No sound after installing windows 7 ultimate.

  I bought a new HARD drive, installed windows 7 ultimate, there is no sound after installing windows7 ultimate.

  When I attach my old HARD drive, windows XP, I get the sound.

  Device Manager shows no error.

  Pls correct me or direct me to over come this problem

  email * address email is removed from the privacy *

  Thank you

  If your computer has problems play a sound, try using the Audio playback problems resolution to solve the problem. For measures and additional information, see o ink below.

  Open the troubleshooting of Audio playback

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-troubleshooterOpen

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx?type=hardware

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

• Problem with remote control in Windows 7 Ultimate

  Hi guys,.

  I encountered a problem since I upgraded my HP Pavilion Elite m9651me from VISTA to Windows 7 Ultimate 64-bit

  the remote control has stopped working & I tried to look for a solution but no luck.

  Please can you help me with this problem

  Thank you.

  Published by looks on 02/11/2009 04:51

  Hi Jajomafa,

  My problem was resolved a few days ago.

  There was that an update of microsoft scored an important in the updates of windows, those I have installed my remote update started woking as if it were before.

  The name of the update was (AVerMedia AVerMedia - Streaming Media and broadcast devices - receiver consumer infrared)

  I suggest that you run the automatic update.

  I hope this helps.

  Kind regards.

• Problems with fax after loading software

  I had my HP 4500 for awhile.  Never had any problems with the fax.  A few days ago I finally loaded the software that comes with it, and now my fax machine doesn't seem to be able to receive.  The rings of the machine about 5 or 6 times, it seems that this connection is, but whenever I get "failed"...

  Any suggestions would be greatly appreciated!

  Hi suzduell,

  Follow the steps outlined in the document below.

  http://support.HP.com/us-en/document/c01956630

• Problems with sound after recording project and reopen it first elements 13

  I am a new user of Premiere Elements. It runs on a PC Pro Windows 8.1. Everything going well until I'm not closing the pragram. If I save a project, close the program and re-open, audio files (any type) can only be heard on the left speaker. If I double-click the audio (audio tool opens upwards) I can see the left and the right lane and it seem okay, but in the draft, I can not both speakers to work. Burning of the project or making changes nothing. All other software is running okay, i.e. None of the problems of sound. Either it's a bug or it's sth. in the settings.

  The sound chip is a RealTEch High definition audio on an Asus motherboard. Any help is very appreciated.

  Thanks in advance!

  Finally, what helped was uninstalling the realtech High Definiton Audio Driver and re-install the same version.

  It is not sensible, but it worked.

  Thanks for the support everyone.

• HP ENVY 15: Problem with audio after the Windows 8.1 update

  Hi, I'm on HP ENVY 15 notebook PC and I updated my windows 8 to 8.1. Until a few days back, everything was fine. However, now, I have no audio through speakers or head phones. Can someone help me please to solve this. Thank you.

  Product number: E4N80EA #ABZ

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63555.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver from the link below.

  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63408.exe

  Once the reinstallation is complete, shut down the laptop by pressing the SHIFT key when you click Shutdown to temporarily prevent a hybrid boot.  Then disconnect the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• Problem with LAN adoption of Windows 7 Ultimate

  I have laptop HP PROBOOK 445 G1 and I installed Window7 ultimate OS and network found problem.so please suggest how this will work fine.

  Hello Ravi,

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1. you receive a code or a network adapter message?

  2. have you installed latest drivers network on your computer?

  It is possible that the network drivers are not installed on your computer.

  To find if there is an error code in the network adapter properties, please follow this link.
  Error codes in the Device Manager in Windows
  http://support.Microsoft.com/kb/310123

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the network troubleshooting and check the issue.
  See this link:
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  If this does not help, then use method 2.

  Method 2:
  Please use the suggestions provided in this Microsoft support article and check.
  Reference:
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  In addition, please download and install the latest network drivers from this link.
  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=5359422&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswEnvOID%253D4059%257CswLang%253D%257Caction%253DlistDriver&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Additional information:
  How can I troubleshoot network card?
  http://Windows.Microsoft.com/en-GB/Windows/fix-network-adapter-problems#1TC=Windows-7

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• No sound after loading Windows 8 on PC from HP g60-553NR

  The laptop has a built-in audio chip Conexant.  Everything worked with the Windows 7 driver, until I upgraded to Windows 8.  Now, no sound from speakers or headphones.  I have the latest driver from HP.  All available patches?

  I do not believe that HP has no win 8 drivers again.  If this isn't the case, you must install the driver win 7 in compatibility mode.

  To run in compatibility mode do the following:

  Click with the right button on the installer > properties > compatibility > chose the operating system

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows?SignedIn=1

• Problems with laptop after uninstalling Windows 10

  I like others had the free update and had nothing else of grief.  Given that I uninstalled my computer crashes when you try to go between different windows.  Can not defragment as it says 'she runs on another program' help!

  Hello

  I suggest you try to reboot the PC once and check if it helps.

  We will follow these methods and check if it helps:

  Method 1:

   

  You can try to clean boot in order to check whether a third-party software is causing a problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7.
  http://support.Microsoft.com/kb/929135

  Note: Don't forget to reset the computer to start as usual, once the problem is resolved. Follow step 7 of the KB article.

  Method 2:

  I also suggest you optimize Windows 7 for better performance and check if that helps.

  Optimize Windows 7 for better performance

  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Hope this helps,

• Problems with Lightroom after installing Windows 10

  I just updated my computer Windows 10 and now lightroom keeps stopping saying Lightroom does not.  I need to download something to clarify that I have not had this problem before?

  Hi Mole2278,

  Greetings.

  Please check the below thread and follow the instructions

  New Lightroom on Windows 10

  Concerning

  Rohit

• Problem with shortcut, opening of Windows 7 ultimate

  During the logon process, this view began to appear. I can cancel the notice and the process continues without any difficulty and does no work. Any advice?

  

  Check your startup folder in the Start Menu for a shortcut. Right click and look at the properties

  It is extremely likely that it is just a shortcut to an orphan and the ability to remove everything that is needed will be, but you should really confirm 1.