Problems with sound after recording project and reopen it first elements 13

I am a new user of Premiere Elements. It runs on a PC Pro Windows 8.1. Everything going well until I'm not closing the pragram. If I save a project, close the program and re-open, audio files (any type) can only be heard on the left speaker. If I double-click the audio (audio tool opens upwards) I can see the left and the right lane and it seem okay, but in the draft, I can not both speakers to work. Burning of the project or making changes nothing. All other software is running okay, i.e. None of the problems of sound. Either it's a bug or it's sth. in the settings.

The sound chip is a RealTEch High definition audio on an Asus motherboard. Any help is very appreciated.

Thanks in advance!

Finally, what helped was uninstalling the realtech High Definiton Audio Driver and re-install the same version.

It is not sensible, but it worked.

Thanks for the support everyone.

Tags: Premiere

Similar Questions

  • problems with sound after installing windows 7

    My sound/audio does not work on my HP Pavilion dv2023tu notebook after a clean installation of windows XP.

    The convenience store said there is a problem with the driver, but I can't find a new driver through windows update, and HP does not either for my model. The device installed on my laptop is called high definition Audio Device. Can anyone help, if not, where can I download the drivers from. It is better to buy driver update software to help locate the right driver?

    Hello

    A lot of Vista for Windows 7 drivers, so try the following.

    Download the Audio driver from the link below and save it to your desktop.

    FTP://ftp.HP.com/pub/SoftPaq/sp34001-34500/sp34387.exe

    Once the download is complete, right-click on the Setup program and select "Run as Administrator" to launch the installation.  If the driver installs successfully, restart the computer and check your audio files.

    Kind regards

    DP - K

  • Problems with sound after you install the operating system

    I have a compaq presario that originally vista os, the system crashed and I could get the recovery work so I installed windows xp and now I'm having problems with the sound. What should I do? I tried to locate the drivers requarding info. I keep getting error messages indicating that I have no audio device. Is it possible to go back to vista? I don't have an instillation cd or recovery for vista cd. Any help would be great.

    Hello

    Go to the link drivers HP > search your computer number model > XP OS > download and install the audio drivers.

    http://WWW8.HP.com/us/en/support-drivers.html

    If no audio driver XP is available, HP provides them.

    Through the installation of XP, you have destroyed the provided HP recovery Partition Vista to reinstall Vista:

    Solve a common problem of recovery with the HP Compaq computers.
    If the original operating system is changed to a non - Vista OS, the Recovery Manager cannot be started from either the desktop or by pressing f11 at startup. You can use the recovery disk to restore the computer to the original state of Vista. If you are using a non - Vista OS, you can use a third-party partition management program to recover hard disk space.
     
    Contact HP and ask them to send you a set of Vista recovery disks.
    Normally, they do this for a small fee.
     

    Some manufacturers have more available Vista recovery disks.

    If this happens, you may need to try this instead:

    You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

    Other manufacturers recovery DVDs are should not be used for this purpose.

    And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

    Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

    "How to do a clean install and configure with a full Version of Vista '

    http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

    And phone Activation may be necessary when you use the above installation method.

    "How to activate Vista normally and by Activation of the phone '

    http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

    See you soon.

  • Problems with sound after installing Vista Ultimate SP1 on HP Pavilion Dv4

    I lost sound after installing Vista SP1 Ultimate on my HP Pavilion Dv4... everything was fine before. Help, please.

    Go to the HP support website and search for Windows Vista drivers for your specific model number. Also look for recent updates, even if your PC comes with Windows Vista preinstalled.
    http://welcome.HP.com/country/us/en/support.html

    If there are Vista drivers then download to a folder on your hard drive and install all of them, starting with the installation card mother/chipset drivers, then the SATA, LAN, Audio, drivers and other device drivers.

    J W Stuart: http://www.pagestart.com

  • Problems with sound after loading Windows 7 Ultimate

    I just loaded Windows 7 ultimate on my HP Pavilian m7100y.  I have no sound, the monitor is an HP vs19c and trendy top speakers.  Can someone please.

    Hello:

    See if this driver works...

    Accept the agreement, download and install the first driver on the list if you have installed W7 32 bit, second driver on the list if you have installed W7 64-bit.

    http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=24&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  • Problems with windows after cleaning viruses and maleware.

    When I select any function after opening a program he leaves an image goast of the selection on the desktop until I restart. Also windows Explorer does not always. Need to close and restart until it works.

    Hi GeorgeCurtis,

    Method 1: Run the fixit available in the link below and check if that makes a difference

    Difficulty of broken desktop shortcuts and common system maintenance tasks

    http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

    Method 2: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    Method 3:  Check with a different user profile

    If you do not have a different user account, you will need to create a (see link below). If everything works fine with a different user profile, you can infer that the user profile is damaged, click on the link to find out how to solve this problem.

    Create-a-user account

    http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

    Difficulty of a corrupted user profile

    http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

    If still the problem persists, possibility that your computer is still infected with the virus

    Method 4: A scanner online for any threat and try to correct

    http://OneCare.live.com/site/en-us/Center/cleanup.htm

    Thanks and greetings
    Ajay K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • problem with sound after installing windows 8.1

    Hi, I have dell vostro 1400 and I installed windows 8.1 a few days before and since the sound does not work in my machine! tried to uninstall the audio and installed again, nothing... set driver update audio driver... nothing as well, even I uninstalled windows and installed again, but no sound comes out, any help please because I'm depressed and don't know what to do?

    THX

    Hi nashnash15,

    I checked the system specification and supports Vostro 1400 are Windows XP and Windows Vista 32 Bit operating system. However, this system has not been tested with Windows 8.1 and would usually rely on generic drivers of windows updates.

    If in cases that do not work, you may need to return to the old operating system.

    Let me know if you have extra help.

  • Skype 'problem with sound recorder '.

    After working perfectly for months, when I now try to use Skype I get the above message.  CD works perfectly all the other its OK.  Skype gave me a chapter and verse to uninstall and reinstall Skype without change.  I guess the problem is in the web cam that contains the microphone and there is no purple light on that.  What can I do else?

    After working perfectly for months, when I now try to use Skype I get the above message.  CD works perfectly all the other its OK.  Skype gave me a chapter and verse to uninstall and reinstall Skype without change.  I guess the problem is in the web cam that contains the microphone and there is no purple light on that.  What can I do else?

    "Problem with sound recorder" suggests that there may be a problem with your input device.

    Open Device Manager (right click on my computer > properties > hardware > Device Manager) and search for "imaging devices". Click on the + to expand the category.  There is a warning (yellow!)? Right-click and select Properties.  Is it the box at low say "use this device (enable)"? If not, do so and click OK.

    While still in the Device Manager, click on the + next to "Sound, video controllers and game."  Locate the entry of your webcam microphone. There is a warning (yellow!)? Right-click and select Properties.  Is it the box at low say "use this device (enable)"? If not, do so and click OK.

    Take a look at control panel > sounds and Audio devices

    Click on the tab "Audio".  What is the default device for sound recording?  It should be your webcam; If this is not the case, adjust it using the drop-down list box.  Same thing for the "Voice" tab and the default device for voice recording.  Be sure to click on the "Apply" or the OK button.

    Click Start , point to programs , point toAccessories , point to entertainment and then clicksound recorder .  That you get error messages when you open or you try to open the sound recorder? If so, please include the entire message, without paraphrase, in your response.

  • Problems with WiFi after put 10.11.2 up-to-date.

    Mid 2011 iMac.  Problems with WiFi after put 10.11.2 up-to-date.  No associated network.  Everything was fine before the update. All the pre 10.11.2 device works fine.  Anyone else having issues?  I have to disconnect and reconnect manually.  WiFi drops every 5 to 10 minutes.  Nothing has changed on the machine something of the update.

    Please do not comment on the age of the system.  Achieve a Mid 2011 arrived at a possible replacement point.  I have many other new Mac at home.  The Mid 2011 is spec'd with 16 GB of RAM, i7 and SSD.  It's always very fast.

    Thank you in advance for the answer...

    Hi Captainsniz

    There are a few things to try. Keep doing this until the problem disappears.

    First of all, if you have not already, shut down the computer completely, wait about 1 minute, then restart.

    Disconnect the wifi network either via system preferences, either by pressing the "Option" key and clicking on the wifi menu bar icon.

    Reset the DHCP lease by going to system preferences > network and show Advanced Options, and then click the button to "Renew the DHCP lease" TCP/IP tab.

    You can delete the wifi network of system preferences > network > network name... then close system preferences. Then reopen and add the network in.

    You can also restart your wifi router, it erases the old connections. Most of the routers you just turn off and wait a few minutes, then restart. You can also reset your ISP modem if you have a.

    Finally, you can try to reset the PRAM and SMC on your Mac. I'll get this info here on Apple Support KBs for your particular Mac.

    Be sure to back up your computer.

    Hope this helps, Greg

  • Problems with the transfer of project of CS5 with Adobe dynamic link to CS5.5

    Hi all!

    Has anyone had the problem with the transfer of projects with Adobe CS5 at CS5.5 dynamic links?

    When I try to do the film hangs on to clips that are compositions of AE...

    The project of CS5 works perfectly.

    All the compositions of AE CS5 are transerred to AE CS5.5 compositions.

    All 'old' Adobe CS5.5 Pr project Hotlinks are replaced by the 'new' States (I mean, links for AE CS5 composition changed to links to the compositions AE CS5.5)...

    Any help will be appreciated

    Tried to play. Realize that a solution should be around redisplay, ' cos related compositions AE always displayed in yellow as if they were original footages - even I changed a composition within EI, just transitions, if they were, turns red in sequence Pr Pro...

    However, I was unable to re - make "Entire work" even after deleting all files of rendering, only 'effects in the work area.

    So I simply created a new sequence and copied and pasted all the clips of the original movie. Now, I have been authorized to "make any work area.

    This is!

  • seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?

    seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?

    The 'list' of relevant articles that I know, they are now

    -You can read about the problems in the present statutes and possibly find workaround solutions, particularly in the last

    If you are unable to activate your iPhone, iPad or iPod touch after installing an update - Apple Support

    Apple iOS suspension 9.3 updates for older devices, work on activation fix | IVous

    Apple launches new version of iOS for iPad users 9.3 2 affected by bricking bug | 9to5Mac

    GSM of unfixed addresses Apple iPad 2 Bug with revised Activation iOS 9.3, but the larger question remains - Mac rumors

    If you are unable to activate your iPad 2 (GSM model) update to iOS 9.3 - Apple Support

    9.3 iOS update issues

    Leave a post by: ChitlinsCC

  • Problems with Windows 10 screen standby and sleep mode

    After downloading 10 Windows on my desktop all-in-one HP, I have problems with the display of standby and sleep mode.  When the computer turns off, he doesn't have the bright screen.

    After the upgrade to Windows 10, some laptops have experienced one or more of the following symptoms:

    • > Power LED remains lit after stopping
    • > Computer enters standby or hibernation.

    HP recommends that customers see these symptoms first update the graphics drivers by removing and then reinstalling the hardware in Device Manager.

    See the section updating the graphics driver from where can I find drivers Windows 10 and software for my model?

  • I'm having a problem with my Windows Media Player and its automatic scoring system.

    I'm having a problem with my Windows media player and its rating system. Usually in Windows Media Player the blue side star system only rate once internet-based critical car. Then after playing constant song change the blue stars. However, on my Windows Media Player ratings only to have automatically scored only once and every time I play the song the side remains the same.

    Whenever I play a song in Windows Media Player 11 it rates the song but when I play the song again the rating remains the same. It auto-taux only the song once. How can I fix it?

    chk this link

    How are ratings used in Windows Media Player?

    http://Windows.Microsoft.com/en-us/Windows-Vista/how-are-ratings-used-in-Windows-Media-Player

  • Downloaded and paid of Minecraft and having problems with Java, Anti Virus Scan and Windows Update - error code 800F081F

    Downloaded and paid of Minecraft and having problems with Java, Anti Virus Scan and Windows Update - error code 800F081F

    Would you advice, thank you.

    Hi Hugo,.

    1. what anti-virus software you have installed in the computer?

    2. What is the full error message/code?

    3. the issue occurred after you install Minecraft?

    4. are you able to play Minecraft without any problem?

    5. what happens with Antivirus and Java?

    Windows Update can occur if one or more of the following conditions are met:

    1. the Windows Update database is damaged.

    2. antivirus software is configured to scan the %Windir%\SoftwareDistribution folder.

    3. the service (BITS) Background Intelligent Transfer Service does not receive a content link header.

    4. a required system file is incorrectly registered.

    5. Windows Installer has encountered an error.

    6. the manifesto of component maintenance (EC) is damaged.

    7. the Windows Update service has stopped during the installation.

    8. a version of the file conflict exists with Windows Update agent files.

    Please follow the steps described in the methods to solve the problem:

    Method 1: We will try the steps from the following link and check the result:

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058?WA=wsignin1.0

    Method 2:

    To correct the errors that occur when you use Windows Update, install, and run the system update readiness tool. The tool analyzes inconsistencies on your computer and fixes as its current installation.

    You can view the following link to download the system update readiness tool and check:

    System tool update that corrects problems of Windows Update is available for Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

    http://support.Microsoft.com/kb/947821

    Details of the event log to find what caused the Antivirus and Java to fail:

    What are the information contained in the logs of the event (Event Viewer)?

    http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

    Hope that the information provided is useful.

    For any help related to this problem or any question of Windows, you can still display in the Microsoft Community Forum!

  • Install KB3024777 to fix a problem with KB3004394 on Windows 7 and Windows Server 2008 R2 now not authentic

    Separated from this thread.

    Joachim

    When first pose the problem? Was it before or after the December updates?

    KB3004394 and KB3024777 appear in view update history? Or do they appear in installed updates?

    Gerry, thanks for your post. I have the same problem as Joachim started this thread. I am running Windows 7 sp1. I have a Dell computer and it's certainly a legitimate copy of Windows (confirmed computer 'properties' and it is enabled).

    By your post, I saw just to update and the KB3004394 (installed on 12/10/2014) and KB3024777 (installed on 12/12/2014) show as comfortable. I usually leave the Windows download updates automatically and I install them to stop. I watched the second update and according to Microsoft.com:

    Install KB3024777 to fix a problem with KB3004394 on Windows 7 and Windows Server 2008 R2

    The KB 3004394 update which was dated December 10, 2014 can cause additional problems on computers that run Windows 7 Service Pack 1 (SP1) and Windows Server 2008 R2 SP1. This includes the inability to install future updates. This new update is available to remove KB 3004394 from your computer.

    My problem is, as of today 14/12/2014, I still get the pop up "this computer is running not windows genuine', even with KB3024777 installed.

    Any thoughts?

    Thank you

    Bob C

    Right-click on CMD

    Click on run as administrator

    At the command prompt, type the following commands:

    slmgr.vbs - ipk xxxx-xxxx-xxxx-xxxx (to replace the specified in the current product key)

    xxxx-xxxx-xxxx-xxxx - represents your product key

    Press enter on your keyboard

    Then type: slmgr.vbs - ato (this will force the activation)

    Leave the command prompt

    Restart your computer

Maybe you are looking for

  • Hollp backup

    Nit to meck save my contacts

  • Compatible RAM for Qosmio X 770

    Hello, Hello, so here I have a Qosmio X 770-10 M PSBY5E 4 GB RAM and I change 8 GB, so I spotted RAM of LDLC here strips so I have as reference DDR3-SDRAM PC3-10600 SO-DIMM 204-pin 1333 MHz. I used a program called PC Wizard to find the reference sup

  • Qosmio X 500-121 - Some Windows failures

    Hello guys,. I am having several problems with my Qosimio X 500-121. Here are the following defects I got for today. I would also appreciate it if this can be answered in English :) If this is not German is fine. + Failure: Der Speicher wurde beim Le

  • Download printer

    I have lost the CD for my Deskjet 1050, how can I download this printer for use on computer again y?

  • 'the disk check utility requires exclusive access to Windows__files on disk' (my hard drive). "Re-start of Windows. __

    FAILED: attempt recovery of bad sectors (disk hard C) I followed the instructions to increase the speed of the PC on the home screen of the box to highlight the function of microsoft.com. I could access the program successfully on my home screen (Win