Problems with split for VLC window view

Similar Questions

• Problem with pdf for the opening of the health gov Web site.

  Problem with pdf for the opening of the health gov Web site. I use my ipad in Safari and have installed the application to adobreader. Healthcare gov support only suggested to disable the pop-up blocker. I did, and I couldn't always open the file. No problem on a desktop computer regardless of the browser.

  In my view, they spend on their web server to a document ECM server authentication. Someone else has the problem?

  I tried the Penguin, Chrome and Atomic browsers on the ipad and the same issue.

  Thank you!

  Keren

  Okay, actually, I think that there is a problem with the type of form. It is a form of a special kind (called a form XFA or Designer, for what it's worth), which can be opened with Adobe Reader and only on Mac or Windows. There is no iPad software that can read these.

• Problem with the installation of Windows XP on the Satellite A200-1RK

  Hello!
  I ve you have a problem with my laptop.
  I would like to install Windows XP SP2 instead of Vista, but I had a problem with the hard drive,
  Windows XP Installer cannot find the hard drive. It is problem with drivers disk, but the site of tohsiba I can´t find my laptop and the disk for XP drivers.
  Why?
  Can someone help me?

  Maybe I can use drivers from another laptop A200 series, but which?

  Hello
  a good explanation how to install XP on a SATA machine can be found here:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=29342

  Welcome and good luck

• Problems with drivers for laptop HP650

  Hello

  I have a problem with drivers for this model.
  I have installed windows 7 32 bit, then removed all the drivers from the official website of HP, but a problem with the two drivers, PCI SIMPLE COMMUNICATIONS CONTROLLER and CONTROLLER ASSISTED, now I can't connect to Internet, LAN or wireless internet.

  Is there a solution?

  

  Hello:

  This is the driver you need for the PCI SCC.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5225011&prodNameId=5225013&swEnvOID=4062&swLang=13&mode=2&taskId=135&swItem=ob-104656-1

  In order to find the right driver for the wireless card (since there may be one of several different model wireless cards in your notebook), go to Device Manager and click on the network controller needing drivers and display the material for her ID.

  If you don't know how to find the hardware ID, please read the info on the link below:

  http://www.DeviceDriverFinder.com/blog/device-drivers/how-to-check-the-hardware-ID-for-a-Windows-device

• PDF file generated from Reporting SERVICES hangs when opened in Adobe reader 11 and saved as with "optimized for fast web view."

  Large pdf (over 1000 pages) generated files form SSRS crashes when opened in Adobe reader 11 and saved as with "Optimized for fast web view" activated. This saves fine with disabling this option. However, our customers are not ready to accept this solution because they do not want to change any settings. Please suggest if we should create a ticket with microsoft for SSRS allow the generation of pdf quick display of Web pages or is it an option in Adobe to fix this problem without changing the settings.

  The SSRS file has Fast Web View: 'No' and that's how Microsoft SSRS generates these files.

  Thank you for the complete maxwyss response

  As you have indicated, the PDF SSRS seems to have some elements that are quite similar to be supported for fast web view.

  We asked customers to disable the fast web view, but the customer is big enough to make a change individually on their machines and so were looking for a solution.

  I saw in several forums and a few discussions here as well as disable the fast web view option works for pdf fails.

  Which was just wondering if its known that multiple PDFs genarted by third parties may have problems with the optimization, the Save as optimized for fast web view could be disabled by default installation of acrobat reader rather than be enabled by default

  Thanks again for the reply!

  PS: links indicating similar problems

  https://forums.Adobe.com/message/7965091#7965091

  https://forums.Adobe.com/thread/1456971

  How to fix Adobe Acrobat "save under" error - Digital Factory tool blog

  https://social.msdn.Microsoft.com/forums/SQLServer/en-us/63cf1325-2054-4ef1-9c5d-631da6a30 cfc/file-size-of-exported-pdfs? Forum = sqlreportingservices

• problem with babylon runing on windows 8-storage initialization failed (error 10)

  problem with babylon runing on windows 8-storage initialization failed (error 10)

  Hi Shlomy,

  1. when exactly you get the error message?
  2. do you have an error message?
  3. are install you authentic version of Babylon?

  This issue would have occurred due to some third-party programs, the origin of the problem. I suggest you perform the clean boot. Clean boot helps eliminate conflicts of software that occur when you install a program or an update or when you run a program in Windows. You can also troubleshoot or determine what conflict is causing the problem by performing a clean boot.

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135

  Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode.

  If the problem only occurs with babylon click here to send a request to the Babylon 8 support team.

  Post us the results after trying the steps above.

• I can't add youtube video on my site (Muse response: there is a problem with the program and windows stops)

  I can't add youtube video on my site (Muse response: there is a problem with the program and windows stops)

  Use the command search at the top of this page or follow this link: YouTube embedding continues to crash the app.

• I have a problem with photoshop cc in windows 10

  Hello

  I have problems with photoshop cc in windows 10. I am not sure if the problems are related to what windows 19, but certainly, the problems got worse since. (My computer runs on windows 10. At an i7 processor, NVIDIA® GeForce® GTX 965 M, the DDR3L 16 gig memory, the GDDR5 2 GB graphics card, a card of 256 GB ssd and 1 TB of hard drive). I don't think it's a problem with my computer.

  I am currently working on a project where I need to cut some parts of the photo, that I will use it later. But I'm having the problem now, some photos displayed as it should. And some are not. They seem to be grey. Or there is some kind of white/gray block above them. It is as if is not available to the loading screen (?). If the object is there, but just does not appear right. I just put a few screenshots here that show the problem. I hope someone can help me with this. Because I can't finish my project with a photoshop which does not work at height.

  

  

  
  

  
  

  I really hope that anyone kno w s, what the problem is and can help!

  Hi Editjo,

  Greetings!

  This seems to be a graphics card problem.

  Please disable the graphics processor in photoshop, and then try again.

  Open Photoshop

  Click on edit-> preferences-> Performance

  Uncheck use graphics processor

  Click OK

  Close Photoshop and re - open and then use the way you did that.

  Also, please share the exact version of your Photoshop.

  Concerning

  Jitendra

• problem with photshop cc monitor windows 8.1 k and 4 to a resolution of 3840 x 2160

  can anyone help

  I have a problem with photshop cc on windows 8.1 and 4 k display to a resolution of 3840 x 2160 when I launch photoshop cc, everything is very small and I don't know how to get the program to the right size

  Install Photoshop CC 2014 and turn on the preference of the user interface scaled by 200%.

• I have problems with the installer of Windows and Windows Update, and the solutions that I found for the two each rely on the other broken system to fix the first.

  I use a laptop HP Pavilion dv4-1220us with Windows Vista Home Premium Service Pack 1, a 64-bit operating system, and I have problems with Windows Update and Windows Installer. When I try to install programs, I get the following, or substantially similar message without the error code:

  "Error 1719. The Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed properly. Contact your support team. »

  So I tried to download Windows Installer 4.5 and install it. When I try to start the installation, it always hangs on the first step, "Initializing Installation."

  After searching for a solution to this problem, I found that Windows Update may have a solution. So I downloaded the 64 bit version and got a file named 'file Windows6. 0-KB942288-v2 - x 64. I tried to run this file. He opened a box that said, in order "Prepare for Installation", "Full Preparation", and finally "Searching for Updates ', before you open a second box, which reads" click OK to install the following Windows software update: fix for Windows (KB942288). I clicked on OK in this box, which opened another box, which says at the top "updates are installed" and in a smaller section, "initializing for Installation................... »

  However, no matter how long it works, it never gets past "Setup initialization."... »

  So I tried to run Windows Update in Control Panel. He ran for a while, before giving a message saying "to check the updates, you must first install an update for Windows Update." I clicked on the button that says "install now". He has flashed, a moment, "download and installation of updates' before you go to the"check for Updates"and then he brought back the exact same upward ' to check updates, you must first install an update for Windows Update" message as before. I clicked install now once again, only to go into the exact same loop. After about four times in a loop, I gave up on it.

  So I tried to install Windows Installer 3.1v2, which took a while before saying "not enough memory is available to process this command." and the abandonment of the installation.

  So, I tried to download a program from 'Mr. Fix - it' of Microsoft. It downloaded fine and then failed on installation, because of the same Setup error I received initially.

  Finally, I tried to restart my computer and each solution is represented. Then I clean my computer and each solution is represented.

  In conclusion, the mistakes that I have in Windows Update and Windows Installer cordoned off each other, as the mistakes of each program are based on the other program to be repaired. I'm at my wit's end here. My computer works fine without one, except that I can't install new programs. I can access the internet fine, access files fine, all my scans have developed own... I don't really know what is happening. Can someone help me with this?

  Try the sfc scan:
  http://support.Microsoft.com/kb/936212

  If not, repair of Vista:
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• problems with updates for Windows (for Win XP)

  I have problems with Windows (for Win XP) updates...
  (1) I installed the hardware updates for my sound card (via Windows update) and now I can't hear the music through my speakers or headphones.  In addition, related to my sound card software do not work either!
  (2) at the same time, I tried to install Microsoft .NET Framework 1.1 Service Pack 1 through Windows Update and that would not install (.. .and I tried several times).

  So to rememdy those issues, I tried for hours to use the system restore, but whenever I've tried I'm not able to successfully restore and I tried several unique restore points.
  Any suggestions?  I spent hours on it, and nothing seems to help!

  Hello hoke, welcome.

  1. What is the brand and model of your computer?

  Let us know if it works:

  1. download the .NET Framework here cleaning tool:
  http://blogs.msdn.com/astebner/attachment/8904493.ashx

  2. run the utility and remove all versions of the .NET Framework
  3. restart your computer

  ---
  After the reboot
  ---

  4. download the .NET Framework 3.5 from here:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=333325FD-AE52-4e35-B531-508D977D32A6&displaylang=en

  5. next, restart your computer

  Let us know if it works,

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have problems with solitaire games in Windows 8. When I select a game I can't abandon it if I want to or just out. I used to hit F2 for a new game, but I can't now.

  I can't play solitaire clear at all, when I hit the icon nothing happens. I started a free cell game which I cannot win, and I can't go out and start a new game.

  Hi Cynthia,.

  Please go to the Microsoft Community Forums.
  From the description of the question, we understand that you are facing problems with solitaire games.
  Let me go ahead and help you with the issue.
   
  Here are some steps you can follow to resolve the problem:
  Please follow the link to run the troubleshooter of Apps and also perform the other steps in the article:
  http://Windows.Microsoft.com/en-GB/Windows-8/what-troubleshoot-problems-app
  
  Also see Help links:
  Microsoft Solitaire Collection
  http://apps.Microsoft.com/Windows/en-us/app/Microsoft-solitaire-collection/1a36fd17-5161-4651-ae2d-13384e427ea8
   
  For the game of Solitaire settings, check with the support of the App:
  http://support.Xbox.com/en-us/browse?product=games
  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• Problems with Aero for Windows Vista: how to activate again?

  Hi all

  I have problems with Windows Aero on my Windows Vista machine. I recently had a problem on my machine where enforcement has been slow and of Windows Aero was disabled to supposedly speed up performance and now I can't enabled it again. Can someone help me to re - activate Aero?

  -c00kiez

  Right-click on an empty space on the desktop > Personalize > Windows color and appearance > under colors, select Windows Aero > wait initialization > OK

  t-4-2

• I have problem with the upgrade of windows 8 for windows 8.1

  When I opened the store and when I click on the option upgrade says I don, t have administrator privileges

  1. press Windows + W and put updates in the search box, select view installed updates search results.

  2. in the window updates installed, search the update for Microsoft Windows (KB2871389) and right-click on it, select uninstall.

  3. now, using the following links, download the update KB2871389 manually package for your edition of Windows 8 and install it:

  Download link [All versions supported on x 86 Windows 8]

  Download link [All versions supported on x 64 Windows 8]

  Download link [All versions supported on x 64 Windows Server 2012]

• problem with USB driver in windows 8

  I use winsows 8 in hp probook 4440 s with processor i3.  Recently I have a problem with my usb ports 3. they do not react like usb 3 and most of the time does not at all. I looked for a host controller driver expandable usb 3 for windows 8, but can't find anywhere because it is built with windows 8. Where can I find the driver or what can I do now?

  Hello

  Check with HP Support, their drivers and documentation online and ask in their forums
  on known problems. The drivers are from HP. update the BIOS, chipset and the major
  device drivers embedded and separate that may affect the USB.

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ====================================================

  Update driver and troubleshooting details (don't forget to check for BIOS, chipset,

  (and other drivers):

  Microsoft - hardware and drivers
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  What happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  Check with the manufacturer of system (manufacturer of motherboard for customized systems) updated
  the BIOS, chipset of low level driversand the major device on-board and separate
  drivers. Execute DriverView - value VIEW drivers Microsoft hide - updated from those
  without drain to their name.

  -Free - DriverView utility displays the list of all device drivers currently loaded on your
  System. For each driver in the list, additional useful information is displayed: load address
  of the driver, description, version, product name, company that created the driver, and
  more.
  http://www.NirSoft.NET/utils/DriverView.html

  To check system drivers manufacturer as replacements and camera manufacturer who are most
  current. Control Panel - device - Display Adapter Manager - note the brand and
  fill out the template tab of the driver for your card video - double-click - write down the
  the version information. Now click on UPdate Driver (this can do nothing as MS is far behind
  certification of drivers) - then do a right click - Uninstall - REBOOT it will refresh the driver
  stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if
  3rd party with their own software and drivers and the other main device drivers you
  a.

  Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration), and then
  Site of the manufacturer of the device (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions.
  (Review of the BIOS, Chipset and software updates on the site of the manufacturer of the system while there).

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT
  After each installation.

  Always check in the Device Manager - drivers tab to be sure the version you install
  actually arises. This is because some restore drivers before the most recent is installed
  (particularly that audio drivers) so install a driver - reboot - check is to be sure
  installed and repeat if necessary.

  Repeat BTW to the manufacturers - manufacturers of devices DO WORK DO NOT THEIR SCANNER-
  manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">