Problems with Spot color gradients

Similar Questions

• Problem with printer color ink large format 7500 has

  Having a problem with the color cartage 920XL

  I tried to print several photos of 4 x 6, where the first is fine and 1/2 way through the other, it starts to print only red

  installed 3 new cartridges, printer head cleaning color, alignment and began to print 4 x 6 photos and the same thing happened.

  Help, please

  I just bought 3 920 new (no large capacity) and was going to try a 3rd time but whated to here from you

  Thanks Mike

  Hi SchneiMB,

  Try the following solutions in the order presented to resolve the issue. When one of the solutions solves the problem, there is no need to continue troubleshooting.

  Troubleshooting print quality problems

• problem with the color picker tool

  Hi there we use Fireworks CS3 and seem to have problems with the color picker tool.
  
  When we hover over a color and select it, we do not get the same color. Sometimes, we choose a blue color and it translates into a green.
  
  Also when we have a color for example chabouni and reduce the color so something lighter, he returned to the Carter.
  
  Can anyone suggest what might be the problem.
  
  This has only started happening recently and nothing major has been installed or removed from Fireworks.
  
  See you soon
  LTA

  Hi Alex,

  Im not sure if you said today or not.

  "Your a chamption!

  Thanks for your help, it works perfectly now.

  I must have accidentally clicked on the nod to the colors for the Web.

  Cheeers
  Malcolm

• using transparency multiply with spot colors

  Does anyone know if spot colors can be used with transparency are multiplying in illustrator CC. I want to create a third color of pieces that overlap / two forms of spot color printing?

  Not agree with John, you just have to watch you preview separations to get your answer. Here the 7691 dark blue gradient is on multiply on 7688 blue light, so we get more degraded rich e, rather than the color is dull where the 2 colors meet.

  

  At the same appearance with CMYK, showing that Nothing's going to CMYK.

  

  

  

  Nothing else in CMYK mode, except for the black

  

• Creation of production files with spot color layered screens

  I'm the task of recreating a job 2 colors (cyan and magenta) , after a thorough inspection of the printed sample submitted with a magnifying glass, magnifying glass, I see a certain part is dark purple as the cyan and magenta used on-site are layered in this area.

  How should I design the production folder so that it is clear that the 2 plates that will be created from said file will result in plates, which have screens of the dowry of two colors in one place so that when it is used the press to produce the purple shadow combined?

  Thank you

  Mathias (master of convolutedly long sentences)

  With cyan and magenta, only it isn't a problem. Sure just your design contains no black or yellow. Use the panels of color and color chart to produce and store mixtures of cyan and magenta to color your design elements.

  But in your title, you say 'spot color screens' which is a little more complex because Illie stores not mixtures of spot colors in the color chart.

  So you will have to work with overprints and saw the overlay turned on while you are working.

  The other possibility is to work in false color, using magenta saying for red and cyan for blue spot.

  Nothing prevents you to work this way and I did occasionally, but you will need to carefully explain what you do to your printer, and is not a bad idea to add a color legend to your work to make sure that your false color is printed in tones right.

• problem with the colors when printing to PDF in FM9

  Hello

  We have some problems with printing to PDF with FM9 colors.

  FM document files eps (1) with a green box and (2) a rectangle created with the tools chart FM, filled with the same values of color green (91/0/60/44)

  In FrameMaker both colors is really different, but too bad, in the PDF color (eps) and the rectangle obtained the same correct green color.

  OK, him differed in creation, so they were CMYK and RGB, but your printing coming.

  Now in FM 9:

  (1) if I do a "save as PDF" and turn off "convert to CMYK in RGB" resulting PDF is the same from FM8 (correct)

  (2) if I print to PDF via distiller and set job options for "convert all colors to CMYK" resulting rectangle Green is very different from the greenery of the eps.

  I tried different options, the best result was "convert all colors to CMYK", the other options just very more ugly.

  Does anyone of you know a solution to your problem? The help is very appreciated. I could send examples of files if necessary.

  Thanks in advance.

  PK

  PK - ulm wrote:

  But we want to use the option to print using the Distiller.

  PIA,

  This sentence needs some explanation, I think. Why you want to use the print option?

  Using the print option,-you're always going the same route that FrameMaker Win has always been, that uses the postscript RGB driver only Windows. Now with FM9, you have the possibility to get CMYK directly to PDF, as defined, without any color conversion. And it * is * works, as long as you limit your documents CMYK or spot from the FM library.

  So, once again: why do you want to use the print option?

  On a sidenote: I do not know if I interpret your username correctly, but if you are able to understand German, you will find some tests deep color manufactured FM9 here: http://www.hilfdirselbst.ch/foren/FM_9_und_Farben_in_PDFs___getestet_P387800.html

  Bernd

• OfficeJet 5470 e-all-in-one: Subscriber instant - problem with #62 color cartridge - Cyan Ink only

  I just installed a new color cartridge and our copies look right.
  
  I aligned the printer and then cleaned them (the two cleanings) and Print quality Diagnostic report shows nothing in the column "Cyan".
  
  Is it possible that the cartridge is defective?
  
  Thank you very much for your help!

  Hi @fiveinthetree,

  I understand that you are having some print quality problems with your HP Officejet 5740. I'll be happy to help you.

  It is possible that the cartridge you received is defective, however, there are some troubleshooting, you need to try before you can replace as defective cartridge.

  I recommend contacting instant ink 1-855-785-2777 for support in real time with an agent. If they determine that the cartridge is defective, they can help you with the replacement.

  If this help will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

  I hope this helps and have a nice day.

• Color laserjet 4600 - problem with one color (yellow) for the most part does not print

  Colors look purpleish when printing photos.  It turns out that this is a problem with yellow print.

  We tried to replace the yellow toner cartridge, and it was not fixed.

  PQ troubleshooting, the yellow page is empty except for a thin (16th of an inch) to 99% a horizontal line at the top of the page.

  In the configuration page, all the different areas that should have the yellow are mostly empty, with the exception of the same sort of thin horizontal line at the top of each of these areas.  After updating the firmware from 03.001.0 to 03.016.0: in addition to what is described on the configuration page, some of the fields in the configuration page that should be yellow, have a pale magenta and more this yellow line.

  Our technician came several times and has so far tried to replace the hvps, scanner laser, toner alignment and trainer kit Board.  Nothing has improved the question.  Then for the replacement is the regulator dc ($1000).

  Anyone here have an opinion on what could cause this problem?  It seems they are just throwing parts at home and we're about to tell them to give up.

  It wasn't the dc controller.  I figured out well out - somehow, there was a spring missing behind one of the speeds in the train of drum roll.

• Problem with stamp - color

  Hi, I have a problem when I want to clone and use stamp have problem with color like this:

  How to solve this problem?

  Check your buffer tool Mode in the Options bar and see if it is set to something else than 'Normal '.

• Problem with the color when exporting to other Adobe programs

  Hello

  When I uses 32 bits per layer in my After Effects to get the really nice glow effect and make everything look OK, but when I use the Dynamic Link for Premiere Pro and then try to make my sequence with Media Encoder deferential eye colors inside After Effects.

  Is there a problem with 32-bpc and dynamic link, or I do something wrong?

  Editing programs do not operate in 32bpc, even if PR calculates the effects in 32 bits. This has to do with the range and models of different colors. Usually 32bpc also requires correct color calibration and conversion via LUTs or profiles from your computer screen is not initially 32bpc. This being the case and to avoid the problems of conflicting settings and hardware acceleration (which is also used for color management), in such situations, it is better to make the file and import it in first. Otherwise, you have work major reading and configuration to do.

  Mylenium

• If an illustrator file has links with spot colors, how can I create PDF files with process colors?

  My file has shades of tones that came with the linked logo, I could not find a way to convert those shades of colors quadri.

  I need to send PDF on a printer with only process colors, I know that the printer can choose to convert spot colors to process when printing with printer within Acrobat Panel, but since we do not print, we need to send files to print ready with process colors only.

  Is there a way or a script to make PDF file generated from Illustrator with process colors only?

  You could try object > flatten transparency and clear colors to preserve overprints and Spot.

  I set the preset high resolution and turn on the preview to see if something dramatic is going to happen.

  After that, you can check the file of color dot in the separations Preview Panel.

• Problem with editing colors in Illustrator CC2015

  Hello

  I'm having a problem when I try to use the function "change colors" in Adobe Illustrator CC2015.  I selects a section/items to be recolored, select "Edit colors > Recolor art" in the "Edit" menu

  When the 'Redefine' window, Illustrator automatically recolors the selected items without my choose what colors I want to change, or what color I would what they changed. It seems that illustrator applies the swatch/colors of something I last selected.

  This makes it impossible to change the colors. I have never had this problem with Illustrator before, looks like when everything started when I upgraded to CC2015.

  I hope that the screenshots below will help you to show my problem.

  This is the work I'm going to select to recolor:

  

  Then, this is done AUTOMATICALLY as soon as I select edit colors - illustrator applies colors in my work without my said to do:

  

  Or, if I had just done a red rectangle, Illustrator automatically apply red in the pane to change colors:

  

  If anyone has AN idea of what's going on, please help - I tried to understand what is wrong for weeks.

  This is a bug and it is being investigated. As for now, you can click the eyedropper icon in the Recolorier Art dialog box to reset the graph.

• export pdf with spot color

  Hi, Im having trouble exporting a PDF with a spot color of ID. What part of my logo once thicker shows its exported. I can place in the work of same exact but using a CMYK color and thick form does not show. Anyone know why this is happening? IM placing an AI. file.

  I am not convinced that has nothing to do with the presence of a spot color. Assuming that you view the PDF file in Acrobat or Reader, take a look at your Page display preferences in the rendering. If "Enhance thin lines" is checked, uncheck and see if it makes stronger, go.

• Problems with the colors and the other in CS6

  Hello world

  I ask your help today for the first time, because I'll have some pretty big problems with colors in Adobe Photoshop CS6

  I'll let you watch this video I recorded for you show what kind of problems I have. As you can see, a very specific color black...
  In addition, you can observe the framework arround the image flashes sometimes...
  

  and two screenshots, the firt we're here to show you the problem, the second to show you my configuration:
  On the one below, you can see the tray black is supposed to be the same blue as selected...
  

  
  
  I also sometimes flashes of the space work and other things like that... But I'm sure that all the problems are related: if I can solve the problem I have with the colors, everything should get back in order.

  Thanks for your help!

  Edward - France

  Update your graphics driver.

  Mylenium

• Problem with my colors

  I installed Photoshop CS6 trial. I tried to create a surface of blue color (r: 0 G:0) B:255) but it was black instead of blue. But only on screen (Screenshot), I have this same problem with the Green surfaces (r: 0 G:255 B:0). But with the red color (R:255 G:0 B:0) it works. But can you help me?

  

  Saved file

  

  Screen (the language is 'German')

  Looks like a known issue with some AMD/ATI graphics card drivers: pixels with red = 0 are displayed black. As far as I know, the very recent 13.2 Catalyst beta 5 is good.

  http://support.AMD.com/us/KbArticles/pages/AMDCatalyst132BetaDriver.as px

  If you do not want a beta driver then use Catalyst 12.8.