Problems with TAB HELP

Similar Questions

• Problems with the help of web camera, it shows it programs and on the desktop. But when I double click on it. It will go to the program do not know what to do. Help, please. Thank you.

  Having problems with the help of web camera program does not work when I click it. don't know what to do. Please help thanks.

  Hello

  Right click on the shortcut tab icon - properties - look on the target line to see where and what type of program
  is supposed to work.

  You will probably need to reload the drivers of the device and any camera control software.

  Login as an administrator.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• problem with the help of the conditional formatting on a cell that is defined as the percentage

  Hi all

  I am facing a problem with the help of the conditional formatting on a cell that is defined as the percentage.

  I am using beaches for example:

  is equal to or greater than 10% - green color

  5%-10%-yellow

  less than or equal to 5%-color red

  
  

  the problem is that keeps the value 10% get yellow color when it should get green.

  
  

  i thought that is a rounding issue but when I change the definitions of the cell to learn more decimal places I see this part of the percentage 9.65% and some of them are 10.00% and they are both colored in yellow.

  I also tried to change the way range of 6 to 9%, but values between 9.65% or 5.5% are not colored.

  
  

  I really enjoy your help!

  You know the reason and the solution.

  change the format of the column and go or add a column more with decimal and opt for conditional and hide report.

  Thank you

  http://cool-bi.com

• Problem with the help of oraext: query-database in the transformation (XSLT 2.0)

  Hello!
  I m facing a problem with the help of oraext: query-database.
  
  In my transformation im try the following (Simplified):
  

  <xsl:template match="*">
    <xsl:variable sqlQuery="select ....."/>
    <xsl:variable name="storeSec" select="oraext:query-database($sqlQuery,true(),true(),'jdbc/xref')/>               
      <xsl:choose>
       <xsl:when test="string-length($storeSec/ROWSET/ROW[1]/STORE_PART_SECTION) > 0">
            <xsl:value-of select="$storeSec/ROWSET/ROW[1]/STORE_PART_SECTION"/>
       </xsl:when>
         <xsl:otherwise>
              <xsl:value-of select"some other val"/>
         </xsl:otherwise>
      </xsl:choose>
  </xsl:template>
  {code}
  
  This always results in +some+ +other+ +val+ !!
  I´v checked the output from oraext:query-database by using getcontentAsString and if I instead test putting the expected output from oraext:queryDatabase in my variable it gives me A100 which is what i expected.
  
  {code}
  <xsl:template match="*">
    <xsl:variable sqlQuery=select ....."/>
    <xsl:variable name="storeSec">
      <ROWSET>
       <ROW num="1">
         <STORE_PART_SECTION>A100</STORE_PART_SECTION>
       </ROW>
       <ROW num="2">
         <STORE_PART_SECTION>XXm</STORE_PART_SECTION>
       </ROW>
      </ROWSET>
    </xsl:variable>               
      <xsl:choose>
       <xsl:when test="string-length($storeSec/ROWSET/ROW[1]/STORE_PART_SECTION) > 0">
            <xsl:value-of select="$storeSec/ROWSET/ROW[1]/STORE_PART_SECTION"/>
       </xsl:when>
         <xsl:otherwise>
              <xsl:value-of select"some other val"/>
         </xsl:otherwise>
      </xsl:choose>
  </xsl:template>

  How to get the correct value when you use oraext:query - database?

  How should you exit? Several item ID with each having a value of the result set?
  If Yes, then you can try following:

• Problems with the help of control Edit Expression with tab control

  Hi all

  I am facing a strange problem when using Expression Edit Control with a tab control.

  When I put the Expression of the RichEdit controls on several tabs in a tab control, and when I run the application, the Expression Edit controls in a single tab are visible, others get invisible! I do NOTHING with them, but they do not simply show upward!

  I first faced this problem using Expr editing controls in Visual Studio c#. NET - with tab controls. For verification, I created a simple VI is LabVIEW to see if the problem is with my request / problem with Expression Edit controls in c#, etc. But voila!  A similar behavior in LabVIEW too! 

  I'm doing something wrong? OR do not do something right? Ask someone for help please ASAP!

  Thanks a ton in advance!

  DASI

  PS: Attached the VI here (LabVIEW 8.5) just download and run it, and you will see probably what I'm talking about!

  
  

• problem with tabs and filter the lines of memory cache

  Dear all I have a problem with the oaf page has two tabs under two of them consists of a table and add the button to the row. Second tab, it's a detail of the first tab, which means that each line in the first tab may refer to one or more lines in the second tab, my problem is when I add the line in the first tab and go to the second tab to add lines to this line of the display of the page added all lines not only the matching lines.

  my code:

  1 - controller

  When press Tab of Lot lines (partial action)
  If (goLotsTab".equals (pageContext.getParameter (OAWebBeanConstants.EVENT_PARAM))) {" "}

  String trxLineId = "38";//row.getAttribute("TrxLineId").toString(); "
  AddLotParam serializable [] = {trxLineId};
  am.invokeMethod ("getTrxLot", addLotParam);
  }
  What press Add button lines of lots (partial action)
  If (addLot".equals (pageContext.getParameter (OAWebBeanConstants.EVENT_PARAM))) {" "}
  String trxLineId = "38"; row.getAttribute("TrxLineId").toString ();
  AddLotParam serializable [] = {trxLineId};
  am.invokeMethod ("addTrxLot", addLotParam);
  }

  When press Add a tab line (partial action)
  If (addLine".equals (pageContext.getParameter (OAWebBeanConstants.EVENT_PARAM))) {" "}
  am.invokeMethod ("addLine", params);
  }

  Methods 2 - am

  public void getTrxLot (String pTrxLineId)
  {
  OAViewObject vo = (OAViewObject) getXXSiteLotsVO1 ();
  LinVo OAViewObject = (OAViewObject) getXXSiteLineVO2 ();

  Line linRow = linVo.getFirstFilteredRow ("SelectLineFlag", "Y");
  pTrxLineId = linRow.getAttribute("TrxLineId").toString ();

  If (!) VO.isPreparedForExecution ())
  //{
  try {}
  String existringWhereClause = vo.getWhereClause ();
  vo.setWhereClauseParams (null);
  vo.setWhereClause("trx_line_id=:1");
  vo.setWhereClauseParam (0, (pTrxLineId) Number);
  vo.executeQuery ();
  vo.setWhereClauseParams (null);
  vo.setWhereClause (existringWhereClause);
  }
  catch (Exception exceptionl)
  {
  throw OAException.wrapperException (exceptionl);
  }

  // }
  following line is commented, but I think that it will contribute to the memory of the filter
  cached data to be mapped.

  Rank [] lotRows = vo.getFilteredRows ("TrxLineId1", pTrxLineId);
  }

  /////////////////////////////////////////////////////////////////
  public void addTrxLot (String pTrxLineId)
  {
  OAViewObject vo = (OAViewObject) getXXSiteLotsVO1 ();
  LinVo OAViewObject = (OAViewObject) getXXSiteLineVO2 ();

  Line linRow = linVo.getFirstFilteredRow ("SelectLineFlag", "Y");
  pTrxLineId = linRow.getAttribute("TrxLineId").toString ();

  If (vo.getFetchedRowCount () == 0) {}
  vo.setMaxFetchSize (0);
  // }

  VO. Last();
  VO. Next();
  Line = vo.createRow ();
  row.setAttribute ("TrxLineId", pTrxLineId);
  vo.insertRow (row);
  row.setNewRowState (Row.STATUS_INITIALIZED);
  }

  

  OK, I'll share my latest code using other

  public void createTransaction() {}

  OAViewObjectImpl vo = getXXSiteHeaderVO1();

  If (! vo.isPreparedForExecution ()) {}

  vo.executeQuery ();

  }

  If (vo.getFetchedRowCount () == 0)

  {

  vo.setMaxFetchSize (0);

  }

  String status = "incomplete."

  OADBTransaction txn = (OADBTransaction) getOADBTransaction ();

  • oracle.jbo.domain.Date currentDate = txn.getCurrentUserDate ();

  Line = vo.createRow ();

  row.setAttribute ("TrxStatus", status);

  1. row.setAttribute ("TrxDate", currentDate);

  vo.insertRow (row);

  row.setNewRowState (Row.STATUS_INITIALIZED);

  }

  {} public void addLine (String pTrxHeeaderId)

  OAViewObject vo = (OAViewObject) this.getXXSiteTrxVL1 () .getDestination ();

  VO. Last();

  VO. Next();

  Line = vo.createRow ();

  int linNum = vo.getFetchedRowCount () + 1;

  row.setAttribute ("TrxHeaderId", pTrxHeeaderId);

  row.setAttribute ("LineNum", String.valueOf (linNum));

  row.setAttribute ("SelectLineFlag", "Y");

  vo.insertRow (row);

  row.setNewRowState (Row.STATUS_INITIALIZED);

  }

  Public Sub getTrxLot()

  {

  LinVo OAViewObject = (OAViewObject) this.getXXSiteTrxVL1 () .getDestination ();

  Line linRow = linVo.getFirstFilteredRow ("SelectLineFlag", "Y");

  String pTrxLineId = linRow.getAttribute("TrxLineId").toString ();

  linVo.setCurrentRow (linRow);

  OAViewObject vo = (OAViewObject) this.getXXSiteLineLotsVL1 () .getDestination ();

  }

  Public Sub addTrxLot()

  {

  LinVo OAViewObject = (OAViewObject) this.getXXSiteTrxVL1 () .getDestination ();

  Line linRow = linVo.getFirstFilteredRow ("SelectLineFlag", "Y");

  String pTrxLineId = linRow.getAttribute("TrxLineId").toString ();

  linVo.setCurrentRow (linRow);

  OAViewObject vo = (OAViewObject) this.getXXSiteLineLotsVL1 () .getDestination ();

  VO. Last();

  VO. Next();

  Line = vo.createRow ();

  row.setAttribute ("TrxLineId", pTrxLineId);

  row.setAttribute ("RowKey", new oracle.jbo.domain.Number (1));

  vo.insertRow (row);

  row.setNewRowState (Row.STATUS_INITIALIZED);

  }

• Problems with the help of Deskjet 3745 on home network 2-PC

  I have an old PC running Windows XP SP3 and a new one running Windows 7, but only one printer. The network that connects the PC is on an ADSL router with its own external Iomega network drive with a USB port.

  To make the printer can be used on two computers,

  1. I initially plugged on the Iomega USB port. But the port was effectively a 1-way connection, so I couldn't preview before printing to see which form/profile of the printer used. So I put discarded and...
  2. revenue to the printer connected to a PC all the time and share it on the network. But two different PCs drivers needed which would not talk among themselves, and the establishment would simply not work.
  3. Finally, I went back to the simple method of the printer on the USB port of any PC, sure I needed it for us. Worked well for a while until the WINDOWS 7
  • Print preview has begun showing empty images (but print correctly).
  • print-queue doesn't have to face the cancelled documents.

  I had help of Deskjet Support to address this issue, which even reinstall the drivers on two PCs - several times! But I'm still left unresolved 3 problems with Win 7 donations.

  Has anyone encountered a similar situation and found a satisfactory solution to work?

  Try the following: connect the printer to the XP computer and set the machine XP to share it on the network.  On the Windows 7 machine go devices and printers folder, add a printer, a local printer, create a Port, Local Port, \\Computername\Printername (use the name of the actual share of the computer and the printer), OK, and then click Windows Update, and then select (not Hewlett-Packard) HP Deskjet 3740 series (Bobo).

• Problems with the help of Windows 8 Mail

  Hello.

  I encountered some problems with Windows 8 Mail that I hope you can help:

  I configured the other IMAP email accounts on my Windows 8 Mail. But facing problems with it;

  (1) emails took very long to cool. Also I'm unable to delete e-mails. As soon as I delete a message, it appears again and gives an error - Email is not available

  (2) cannot create new folders. Gives an error - the action I'm doing may not be completed.

  (3) I am also unable to save an Email Signature with links. It won't let me save a plain text signature.

  Y at - it a setting that I missed? I thought that the option of e-mail with Windows 8 has been very effective, that's why I chose to merge my other accounts work for this.

  Help, please. Thank you

  The Mail app can not handle the mail POP and is limited to Basic for IMAP mail functions. Use the post office to work. You'll have more control and features.

• Problem with tab panel

  I designed the Panel tab with tab 3.
  2nd tab contain read-only table, and user can select the folder and press the button "Edit", another page loaded for update record.
  
  The problem: when the user click on 'back' button in the edit page to return to the Panel by tabs, Navigation go to the first tab, which is false.
  How do I configure a second navigation or necessary tab?
  
  Technologies used: Jdeveloper 11.1.1.0.1, ADF BC

  Hello

  You can set a bean to support for your tabs Panel and use it to set the tab appropriate, such that disclosed...

                  panelTabbedMain.getChildren().get(i).getAttributes().put("disabled",
                                                                           true);
  

  I am disabling the tabs like that. You should be able to put the correct child "revealed" also with the same logic.

  Another way might be to use EL-all your point of show-detail to take his property disclosed in the EL and the EL should be smart enough to return true only for the release tab. For example, if you manage a hashmap in session matched with tab-names and value as true or false. So your show-detail items will be something like #{TabManager.tabDisclosure ['tab2']} in the disclosed property. GetTabDisclosure of your tab - manager must return a hashmap with true or false to tab2 keys... However, I would have preferred option-1...

  Kind regards
  Julian

• Known problems with the help of 64 bit Essbase with version 11 planning?

  Hello Experts,
  
  
  One of my clients is considering moving to the 64-bit Essbase. Are there known issues with the help of 64 bit Essbase (11.1.1.0.00) with the version 11 planning?
  
  
  Thank you
  
  Jingle

  I tested and there is no problem at all, if your planning server is 32-bit, you just install the 32-bit Essbase client that can communicate with the 64-bit server.

• Problem with the help and support after Windows Update

  Hello

  After downloading some updates from microsoft, I now cannot open the option "help & support". It is said ' sorry Internet Explore cannot download / help.

  Anyone got any ideas how I could restore the option ' support & "?

  concerning
  Dale

  Hello

  It would be useful to tell us what operating system you have and what computer you have. Regarding your problem:

  who help and support option do you mean? Help windows?

  Moreover, already checked the website of microsoft? Would be useful for you since almost all topics around the windows are covered here.

  Visit this link for the support of the MS Web site: http://www.microsoft.com/europe/

  Welcome them

• I wonder if anyone is familiar with this type of problem with the help of a Windows Media Player for DVD videos.

  Hello!
  I came across a problem with my dvd on my laptop drive. The program that I use on my laptop is Media player from Windows. And the laptop will recognize the DVD and everything, but when it starts to play, it gives me this message from Windows Media Player: "Windows Media Player cannot play video DVDs. You may need to adjust your Windows display settings. Open display settings in Control Panel, and then try to lower your screen resolution and color quality settings. »

  Now I always use the old Windows XP for my laptop, but I can't seem to understand how to adjust the color quality and lower my screen resolution. Does anyone have a little step by step process that I could follow to do this?

  Lyn24 wrote:
  > Hello!
  > I ran into a problem with my dvd on my laptop drive.
  > The program that I use on my laptop is Media player from Windows. And the
  > laptop will recognize the DVD and everything, but when it starts to play
  > gives me this message Windows Media Player: 'Windows Media Player '.
  > can't read DVD-video. You may need to adjust your Windows screen
  > settings. Open display settings in Control Panel and try again
  ring your screen resolution and color quality settings. »
  >
  > Now, I still use the old Windows XP for my laptop, but I can't
  > seem to figure out how to adjust the color quality and lower my screen
  > resolution. No matter which deals a little step by step I have
  > could follow to do this?

  The problem is that Windows XP does not play DVD movies in native mode. You can
  have a DVD player, but it can only read DATA DVD at this time. In the order
  install a DVD codec to read video DVD discs. First we will
  Install this program from Microsoft and run it, and if you have a DVD
  Codec, it will appear in the display window. Download this program from
  here:

  http://www.softwarepatch.com/Windows/windowsdvdmpeg.html

  If it shows that you don't have a codec DVD installed, then you can
  buy one on one of the links on this page:

  http://www.Microsoft.com/windows/windowsmedia/player/plugins.aspx

  --

  Roy Smith
  Windows XP Pro SP3

• Problem with bbwp / HELP! :)

  Hey guys,.

  I'm new to the Blackberry Developer Zone and I am trying to convert my .zip file for the moment I watch the tutorial "develop using the BlackBerry® WebWorks SDK for BlackBerry tablets (1 of 4)»

  Now when I run bbwp it disconnects automatically within a period of a half second or more.

  The top line says: "invalid command line parameters [ERROR]".

  All other lines are just as usual.

  Anyone who knows what is my problem? Please help me!

  Thank you!

  I'm on Mac OS X btw

  EDIT: Got it to work! :$

  Listen to develop using the SDK software BlackBerry® WebWorks for BlackBerry tablets (1 of 4) for how.

  Yes, of course type the following line at your Terminal (Mac OS X). Windows is almost the same:

  / Users/username/bbwp/bbwp /Users/UserName/Coding/Playbook/Test/Test/Test.zip

  And then it's your output:

  [INFO]

  Parsing of the command line options

• problems with partitions - help please. [Hp dv6 2135sl]

  Hi all! So, I'm first of all I apologize for my English Italian.
  I bought a laptop HP dv6 2135sl with Windows 7 and I have a problem with the partitions.

  The partitions are all primary and the order is the sequent:
  C (450 F)
  tool HP (99MB)
  recovery (16GB)
  Sistem (199 MB)

  I would decrease C up to 50 GB and create two other partitions: J (programs 150 GB) and K (250GB of data). Is this possible? I realized that I have to change one of the 4 partitions in scope. What is the best? (Partition Wizard report an error: "no free slots of MBR"). Can I still use PM or I need something else?

  PS: Cannot use Acronis (not supprt W7) and if it's possible I won't use Gparted because I'm a noob; )

  Thank you all!

  I found a solution:

  I used the tool of W7 to handle the drive. I have create a 270 GB partition (the maximum allowed this program), then the disk was converted from basic in dinamic one disk. I opened the Partition Wizard, I turned the disc in the base. As if by magic, I found recovery logical (previously primary). Now I am able to create the partition n!

• Problem with tab groups

  So I decided to try the groups to tabs, because I had never actually used the feature before. Now, every time I open Firefox the tab or tabs that belonged to the Group of open again. How can I stop this?

  Hello

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  Thank you.