Problems with the colors

Similar Questions

• problem with the color picker tool

  Hi there we use Fireworks CS3 and seem to have problems with the color picker tool.
  
  When we hover over a color and select it, we do not get the same color. Sometimes, we choose a blue color and it translates into a green.
  
  Also when we have a color for example chabouni and reduce the color so something lighter, he returned to the Carter.
  
  Can anyone suggest what might be the problem.
  
  This has only started happening recently and nothing major has been installed or removed from Fireworks.
  
  See you soon
  LTA

  Hi Alex,

  Im not sure if you said today or not.

  "Your a chamption!

  Thanks for your help, it works perfectly now.

  I must have accidentally clicked on the nod to the colors for the Web.

  Cheeers
  Malcolm

• Problems with the colors and the other in CS6

  Hello world

  I ask your help today for the first time, because I'll have some pretty big problems with colors in Adobe Photoshop CS6

  I'll let you watch this video I recorded for you show what kind of problems I have. As you can see, a very specific color black...
  In addition, you can observe the framework arround the image flashes sometimes...
  

  and two screenshots, the firt we're here to show you the problem, the second to show you my configuration:
  On the one below, you can see the tray black is supposed to be the same blue as selected...
  

  
  
  I also sometimes flashes of the space work and other things like that... But I'm sure that all the problems are related: if I can solve the problem I have with the colors, everything should get back in order.

  Thanks for your help!

  Edward - France

  Update your graphics driver.

  Mylenium

• Problem with the color when exporting to other Adobe programs

  Hello

  When I uses 32 bits per layer in my After Effects to get the really nice glow effect and make everything look OK, but when I use the Dynamic Link for Premiere Pro and then try to make my sequence with Media Encoder deferential eye colors inside After Effects.

  Is there a problem with 32-bpc and dynamic link, or I do something wrong?

  Editing programs do not operate in 32bpc, even if PR calculates the effects in 32 bits. This has to do with the range and models of different colors. Usually 32bpc also requires correct color calibration and conversion via LUTs or profiles from your computer screen is not initially 32bpc. This being the case and to avoid the problems of conflicting settings and hardware acceleration (which is also used for color management), in such situations, it is better to make the file and import it in first. Otherwise, you have work major reading and configuration to do.

  Mylenium

• I'm having a problem with the color of the text on the drive flash on Chrome

  The color of the text seems to be only on main lines and the rest is white, only started a few weeks ago and only on Chrome.

  I reinstalled and it is restarted during this time, I disabled the acceleration hardware and erased all the cache and data navigation, but still I can not read anything.  I added a screenshot of adobe help page, the writing is supposed to be red.

  

  Please help makes me crazy!

  Thank you

  Could you try to revert to the version PPAPI of the plugin to see if that helps (reverse the steps in the FAQ below)?  What we have learned, that effects only the NPAPI and version PPAPI should display the fonts correctly.

  Activate the system Flash Player in Google Chrome | Windows | Mac

  We are working with Google to solve this problem as soon as possible.

  Thank you

  Chris

• problem with the color-space conversion

  I am under Photoshop CS5 x 64 with the latest updates, with the latest updates win7x64 too.

  Pictorial seal use AdobeRGB color space to work. The histogram of the image is good.

  If I convert the image in sRGB color space, the Red becomes saturated.

  This very clearly shows the histogram of the Red layer.

  This problem occurs in colorimetric settings perceptual and relative, as well as Photoshop X 86

  With its engine color of Microsoft, the red channel is less saturated.

  In my understanding, in perceptual mode, color-space conversion should create any saturation in the image.

  Please can you tell me if this behaviour is expected?

  Concerning

  Nicolas

  It is simply that your shadow (if there are shadows in space) is not neutral - they have a strong, dominant blue/cyan:

  

  These deep blues are outside the gamut sRGB and clip. The red channel (the opposite or complementary color) wants to go further, but can't.

  If it is a raw capture, you can use the split toning slider for red push in the shadow (to make them neutral). Or you can use curves in the Adobe RGB file, or the channel mixer or a number of other things.

• problem with the colors when printing to PDF in FM9

  Hello

  We have some problems with printing to PDF with FM9 colors.

  FM document files eps (1) with a green box and (2) a rectangle created with the tools chart FM, filled with the same values of color green (91/0/60/44)

  In FrameMaker both colors is really different, but too bad, in the PDF color (eps) and the rectangle obtained the same correct green color.

  OK, him differed in creation, so they were CMYK and RGB, but your printing coming.

  Now in FM 9:

  (1) if I do a "save as PDF" and turn off "convert to CMYK in RGB" resulting PDF is the same from FM8 (correct)

  (2) if I print to PDF via distiller and set job options for "convert all colors to CMYK" resulting rectangle Green is very different from the greenery of the eps.

  I tried different options, the best result was "convert all colors to CMYK", the other options just very more ugly.

  Does anyone of you know a solution to your problem? The help is very appreciated. I could send examples of files if necessary.

  Thanks in advance.

  PK

  PK - ulm wrote:

  But we want to use the option to print using the Distiller.

  PIA,

  This sentence needs some explanation, I think. Why you want to use the print option?

  Using the print option,-you're always going the same route that FrameMaker Win has always been, that uses the postscript RGB driver only Windows. Now with FM9, you have the possibility to get CMYK directly to PDF, as defined, without any color conversion. And it * is * works, as long as you limit your documents CMYK or spot from the FM library.

  So, once again: why do you want to use the print option?

  On a sidenote: I do not know if I interpret your username correctly, but if you are able to understand German, you will find some tests deep color manufactured FM9 here: http://www.hilfdirselbst.ch/foren/FM_9_und_Farben_in_PDFs___getestet_P387800.html

  Bernd

• I recently installed turboc ++ software and I had problem with the color scheme of windows7 home basic

  in windows 7

  Control Panel-> appearance-> display-> change colors->
  After that I only have 5 options, with the exception of windows 7 standard & basic windows color scheme 7
  I have windows 7 Home Basic Edition

  Seems that the installation of Turbo C++ runs in compatibility modeof Windows.

  I hope this helps: http://www.sevenforums.com/tutorials/258-color-bit-depth-display-settings.html

• Problems with the colors appears not properly.

  This has been a persistent problem. I created links in my pages and assigned different colors links to help the user determine which link it is. On some pages, the colors appear correct and the next page color links appear in black. Sometimes the entire page links are black, and sometimes it's just a little. I deleted all the links and the colors and started around, but not luck.

  Has anyone had this problem and overcome? What is the cause of this problem?

  I think that you are referring to the visited links, which, by default, change the revisit the page.

  You can try the suggestion mentioned here to return to the default color on visit:

  http://StackOverflow.com/questions/8188060/how-to-make-link-not-change-color-after-visited

  If it's not you're talking about, then please provide the url of the page and screenshots where you see a color change.

  Thank you

  Sanjit

• Problem with the color of the stripes on a blue sky using LR4.3

  Hello

  Recently, I updated my LR3 to LR4.3 and my camera of Olympus EP2 in the MDGS. So, I don't know if one of these factors play a role, but I started having serious of strips on pictures taken in bright sunny day with blue skies.

  I'm not an advanced user of LR and my process of developing photos in LR has always been quite simple. First of all, I export images in RAW format of a map on a hard drive. Then I make some adjustments and make two copies of each RAW file jpeg.

  Only one I have in the export settings box of the file as a JPEG file, dialog box space sRGB color, 100% quality and another copy I have export for the web so, I limit size to a minimum without defining any reductions in quality.

  Yet once, export-> dialog box file setting-> check (checkbox) file size limited to 300 KB to 1 MB. In this case, for example, the file was large was so, LR I was unable to save this file in less than 950 KB. (Most of my photos is saved to 400KB very well)

  Here is the link to photo https://picasaweb.google.com/lh/photo/2VnXu6_Q8eB1u_4Zv4pE5aRyWIM3b1U0dQsgxpOe7AA?feat=dir ectlink

  Thank you in advance,

  Gena

  genadi_mak wrote:

  I just tried to export a file from my old EP2 with the same settings as I always got 100% quality and size limit of the file 450 KB using LR4.3. And, I see bands, so it is certainly how LR4.3 compresses files vs any compression method was made in LR3.

  If you use the same settings for export as LR3 then it is probably due to more aggressive tonal controls of PV2012. Try the same export using LR4.4 using the adjusted images using PV2010 to confirm.

  genadi_mak wrote:

  I experimented a bit and found that if I lower the quality to 77% and resize to fit the photo to 1000 X 1000, get the size of the file up to 350 KB and good results on my monitor 24 "but, it will be sufficient to print 4 X 6 if necessary?

  For best results, most printers require 300 dpi image files, which would be 1800 x 1200 for 6 "x 4" prints, but you can get reasonable results for as low as 150ppi (900 x 600).

  genadi_mak wrote:

  If I leave 100% quality and resize 1000 X 1000, the file size 650 KB. This will result in page with photo catalog loading more.

  It is the opposite of what you should do to keep the smaller size of the files. The receiving office the only reason use 100% quality JPEG is if you plan doing editing later in the file. Even by uploading files to a printer a 90% quality setting is very adequate and show NO difference in the final print. For the Web, I have already suggested that a 50 JPEG quality is adequate. Please read the article on the link posted by Andrew and my comments.

  Try an export using sRGB, quality 50, 1000 x 1000 Image sizing and sharpening screen Standard. Look at the exported images in LR at the sight of 1:1 for Visual artifacts such as strips, and then publish them to the web and watch them at full size. They should look identical. If this is not the case, let us know.

• Problem with the color of the text

  My apologies if this has already been answered elsewhere, but here's my problem:

  I created several paragraph styles that and makes the color of black characters, (as this style of 'body' here)

  

  But when I apply to my text, the text is not black. (it's the color of one of my other paragraph styles)

  

  Any ideas why this might be?

  Check to see if there is a Style of character applied to the text. This would be to substitute the paragraph Style settings. If so, set character Style None.

• Problem with the color of the text of the legacy.

  I have a challenge to getting the logic behind what I guess is a matter of inheritance on one of my web pages.

  On a web page (<http://www.vegasfastads.com/features.html>) I had to change the color of the text of the white to black.

  On all pages on my site, I have a piece of code in the library which contains links to several pages (at the top of each page).

  On the page where I changed the black (the white) text despite numerous attempts to prevent it, the links of the library have black text on a black background and I want the text in the code in this library is white on a black background (like all other pages).

  It is probably easier to show you the pages:

  good page (note the color of the links at the top):

  http://www.vegasfastads.com/index.html

  problem page (note the black text on a black background - hopefully you can figure out where it is):

  http://www.vegasfastads.com/features.html

  Any help would be much appreciated.

  Peter

  Peter A. Forkes wrote:

  I have a challenge to getting the logic behind what I guess is a matter of inheritance on one of my web pages.

  On one of the web pages (http://www.vegasfastads.com/features.html>) I had to change the color of the text from the white to the black.

  On all pages on my site, I have a piece of code in the library which contains links to several pages (at the top of each page).

  On the page where I changed the black (the white) text despite numerous attempts to prevent it, the links of the library have black text on a black background and I want the text in the code in this library is white on a black background (like all other pages).

  It is probably easier to show you the pages:

  good page (note the color of the links at the top):

  http://www.vegasfastads.com/index.html

  problem page (note the black text on a black background - hopefully you can figure out where it is):

  http://www.vegasfastads.com/features.html

  Any help would be much appreciated.

  Peter

  Give to the library item

  'id' Visibility as:

  Home page | etc etc etc.

  Add some css in your css stylesheet:

  #topNav a {}

  color: #fff;

  }

  If you also want a color hover on the links:

  #topNav a: hover {}

  Color: #333;

  }

• Problem with the color of background under Firefox

  On my web site, I put a color #FFFFEE to the bottom of the body.
  Then I have a div (box 2) that contains the text of the page; the background is white (#FFFFFF).
  On some screens, I display a list of records, the length of this list is variable.
  In IE, the background is always white; No problem.
  But under Firefox, when the list is short down takes the body background color (#FFFFEE).
  You can try it on my site web http://www.tregor.fr
  Try the menu built heritage / megaliths.
  In my mind the bottom of the list should be white as the color of the background of the parent is white.
  Does anyone have an idea on how to fix this?
  Thank you very much.

  Add background-color: #FFFFFF to .inside-2

• Problem with the color when sending file AE to first.

  I am very new in the world of After Effects. I made a video where I asked a black and white hue on a color video. I cut out a specific color of the color video and

  everything in the reading seems correct. The isolated color is exactly where I want it and the rest of the colors are made to be black and white. However, when he goes

  Back to Adobe Premiere all color refers to the video and not isolated color I've done in my file of AE. I don't know this is a very simple solution and because I'm new to

  This I skip a step which can be primary. Help is very appreciated.

  Without knowing anything about your effect, structure of the layer and so now no one can tell you a lot. As a first step, make the timeline in the first. Very little of what makes AE is in real time in such a way that it would return immediately to first. Most of it must be rendered, give or take a few effects that have been optimized.

  Mylenium

• I had problems with the color mode. kept, restart photoshop to find the problem. NOW Photoshop CS6 will not organize, it is stuck on "initializing". How to start?

  At first my documents were pasted on the CMYK color mode, and I couldn't understand how to convert the file in RGB.

  Finally, I abandoned, saved the file and tried to present what I was working on a Web site.

  Before that, I closed photoshop and he raised 2 times in a row to test color on profiles. When finally it seemed to me he decided to go back to RGB, I closed and returned to climb my image. However, the site did not accept it because the jpg was in CMYK. So, I went to relaunch photoshop to convert its color profile and now photoshop will not launch.

  As a first step, it got stuck on "checking memory."

  I closed my computer to see if this would clearly be the question, then tried to restart photoshop and it is now stuck on "initializing".

  I really need photoshop work, so how can I solve this problem?

  Laptop: The Retina of Macbook Pro screen

  OS: OSX 10.11.3 EL Capitan

  PS: Adobe Photoshop CS6

  It is the first time that I ever had this problem, and I've had this program for 2012.

  Hi shiblets,

  Please press the home button on the keyboard when you see the screen "initializing".

  If it does not, please press the SHIFT key and then launch Photoshop, to ignore the third party Plugin.

  Kind regards

  Tanuj