Problems with the contours of Create type
I have converted a character in a line with the help of vectorize.
I cut a part of the race of contour with the scissors tool, but it is still connected to the original letter. I can catch it and move with the direct Selection tool, but if I select it with the main selection tool selects the line and the remaining part of the character. The bounding box then includes the section that I cut out and the rest of the character. Is there a way I can completely separate the cutting of the section and the rest of the character so that it is a completely separate object?
Select it with the direct Selection (A) tool, and then cut and paste in place.
Tags: Illustrator
Similar Questions
-
Original title: profile has been automatically removed, new profiles created automatically and can not open a session
Help! I closed my laptop (only in the ordinary course of its use) and when I turned it back on, my usual user profile was gone and a couple of new ones have been created. One was created with my professional e-mail address as username (which is strange because I've never used this e-mail in the computer) and the other is empty. I tried to connect both of the profiles using my old combinations of the new user name and password, or user name and the old Word, but it is said that the account and the password is incorrect. I also tried to log on as an administrator, but it says "your account has been disabled. See system administrator. Is it possible to recover the data in the old profile without reinstalling Windows because I am away from home and do not have the disc. ... I use Windows 7.
Thank you very much in advance for any help!You might be able to solve your problem using the system restore. Here's how it works:1. keep tapping F8 during the first phase of startup.2. select Repair from the menu.3. Select an administrator account, and then enter its password.4. When you are prompted, select System Restore.5. set Windows to a point before this problem occurred.On questions of password-, I treat my PC as I have my house: I always have a spare admin account / SpareKey so that I can return new anything that happens. You have a fully tested alternative admin account? If you do not, and if the method above doesn't work, then, you have a major problem that you will not be able to resolve without a CD to repair Windows. -
Problem with the tool pen creating a fill when I want only the stroke
Hello
I'm having a problem. I create a simple spider for a project. Initially, I used the pen tool to make the legs. He worked for a bit, then started suddenly in an area that I has yet to draw with the fill color. I don't know what I did to cause this happens. Any help would be appreciated. Thank you
This form shows a yellow fill, probably from the last shape you drew. If you select the form and clear the fill, your drawing will return to black lines only.
-
Problem with the menu when creating Bluray
Hello world
My first post here and not really a professional in creating...
I recently create a project still 5.1.0.342.
The project is made of some exported videos first.
The problem is that when I build a bluray image (file works the same and I have not tried disk because I don't want wasting them) there is absolutely no menus.
I created a set of chronologies, some in playlist (no chapter selection) and named 3 menus associated with a video in the background.
When I check the project all that I get no error and the entire construction I've tried so far is well over.
When I saw after the restitution of everything on the menu is very good.
When I build the DVD image everything goes according to the preview and the chart.
When I build the BluRay all the files appear to be in the bluray (I can access everthing with the option of selecting players), but there is no menus.
I found videos with buttons and circles, but they are like other videos, they are not menus...
If anyone has any idea I'll take.
Thank you for reading me and sorry for my English, I'm french.
If you have a BD - RE disc, then please try to burn to disc.
And if the menu is set as the first piece, it will appear after inserting the disc. (Anything defined as part of the project appears on the disc.)
Thank you
Ramesh.
-
Problems with the cursor when you type
I don't know if it's something in Vista, but I have terrible problems in Word and when typing emails. I can touch type and normal type without looking at the screen. However, I find when I look at the screen, the cursor inexplicably himself stuck about4-6 rear lines and hit the last piece in the middle of the existing text. In fact it just happened again - when I type ing he climbed to the title: why!
I feel responsible because I don't get it in the older microsoft software that I use at work and it has never done in internet cafes - didn't have it a few months, but it drives me crazy: why it does this?
Patjom, make sure that you do not have to hide when you type the value of the mouse pointer. Here are the steps:
Open mouse by clicking the Start button, click Control Panel, clicking hardware, and then clicking on the mouse.
Click the Pointer Options tab, and then do one of the following:
Uncheck the Hide pointer while typing Rami
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Problem with the BLOB data as type. JPEG file
If im my current procedure, I am creating an XML file with an assortment of blob as .jpeg file. The issue I'm having is that the .jpeg created files seem to somewhat corrupt, which means that some images are missing part of their pixels/bytes(not sure what the correct term here is). So basically, the images are output with some parts of them are cut.
-------------------------------------------------------------------------
* Note:
The file BLOB look good when you view them in my table
Length in bytes of BLOB is all WAY less 32000 (each is about 8 k)
-------------------------------------------------------------------------
Here's some of my code that can help to give a better idea of how things work...
Oracle: 10.2 g
Here's my loop for
This is the query that fills the BLOB file and the XML dataFor ii in 1..player_results.count loop --Outputs Bloop File xBlobFileType := utl_file.fopen (xFilePath, player_results(ii).hmi_player_filename , 'W', 25000 ); dbms_lob.read (player_results(ii).heat_map_image, xAmt, xPos, xBuffer); utl_file.put_raw (xBlobFileType, xBuffer); utl_file.fclose (xBlobFileType); --Prints data for XML file utl_file.put_line (xFile, lpad(' ' ,xParentIndent, ' ') || '<player>'); etc...
Published by: user652714 on April 10, 2009 10:56select gs.distance_run, gs.avg_speed, gs.possession, gs.heat_map_image, --BLOB File gs.team_id, s.home_team_id, s.home_team_id_1032, s.away_team_id, s.away_team_id_1032, s.game_code, s.game_code_1032, (case when gs.team_id = s.home_team_id then IMAGE_NAME_HOME$' || s.game_code_1032 || s.home_team_id_1032 || xBlobNameExt else 'IMAGE_NAME_AWAY$' || s.game_code_1032 || s.away_team_id_1032 || xBlobNameExt end ) hmi_team_filename bulk collect into team_results from soccer.soccer_optical_team_gm_stats gs, customer_data.cd_soccer_schedule s where gs.game_code = xGID and gs.game_code = s.game_code order by decode(gs.team_id - s.home_team_id, 0, 0, 1) desc;
Explanation in comments
delcare xAmt binary_integer := 25000 begin loop dbms_lob.read(...,xAmt,...); -- at this point xAmt is the number of bytes or characters read, not necessarily 25000 .... xAmt := 25000; -- <--- try adding this at the end of your loop (or the appropriate location) end loop; end;
Could you post the whole code of procedure block?
-
problem with the definition of a boolean as output parameter type
Hi, I have a problem with the definition of type boolean as output parameter and it must return true if the query procedure retrieves one line else it shouuld return false
Hi, I have a problem with the definition of type boolean as output parameter and it must return true if the query procedure retrieves one line else it shouuld return false
And what are the issues? Its simple.
SQL> create or replace procedure is_emp_exist 2 ( 3 p_empno in emp.empno%type 4 , p_result out boolean 5 ) 6 as 7 l_empno emp.empno%type; 8 begin 9 select empno into l_empno 10 from emp 11 where empno = p_empno; 12 13 p_result := true; 14 exception 15 when no_data_found then 16 p_result := false; 17 end; 18 / Procedure created. SQL> declare 2 l_result boolean; 3 begin 4 is_emp_exist (7788, l_result); 5 6 if l_result then 7 dbms_output.put_line('Employee Exist'); 8 else 9 dbms_output.put_line('Employee does not Exist'); 10 end if; 11 end; 12 / Employee Exist PL/SQL procedure successfully completed. SQL> declare 2 l_result boolean; 3 begin 4 is_emp_exist (1000, l_result); 5 6 if l_result then 7 dbms_output.put_line('Employee Exist'); 8 else 9 dbms_output.put_line('Employee does not Exist'); 10 end if; 11 end; 12 / Employee does not Exist PL/SQL procedure successfully completed. SQL>
-
Hello, I am a beginner, I have a problem with the CLOB type, please help me
I want to write the input file is filename and string base64, then output decoded base64 content in dicrectory location (for example C:\),my code was executed but if entry with base64 long string, it displays error)
And this is my codeORA-29285: file write error ORA-06512: at "SYS.UTL_FILE", line 136 ORA-06512: at "SYS.UTL_FILE", line 813 ORA-06512: at "SYSTEM.WRITED", line 9 ORA-06512: at line 1 29285. 00000 - "file write error" *Cause: Failed to write to, flush, or close a file. *Action: Verify that the file exists, that it is accessible, and that it is open in write or append mode.
Thank youcreate or replace directory dir_temp as 'C:\'; / create or replace procedure writed(filename varchar2,code clob) as f utl_file.file_type; v_lob BLOB; begin v_lob := UTL_ENCODE.BASE64_DECODE( UTL_RAW.CAST_TO_RAW(to_char(code)) ); f := utl_file.fopen('DIR_TEMP', filename, 'w'); utl_file.put_line(f,to_clob(utl_raw.cast_to_varchar2(v_lob))); utl_file.fclose(f); end;
DBMS_XSLPROCESSOR.clob2file( cl => l_clob , flocation => 'XML_LOG' , fname => myfile_name );
for example
SQL> ed Wrote file afiedt.buf 1 declare 2 type t_emps is table of emp%ROWTYPE; 3 v_emps t_emps; 4 -- 5 v_clob clob; 6 v_newline varchar2(2) := chr(13)||chr(10); 7 begin 8 -- get the rows into a PL/SQL collection of records 9 select * 10 bulk collect into v_emps 11 from emp; 12 -- build up the CLOB 13 v_clob := 'EMPNO,ENAME,JOB,MGR,HIREDATE,SAL,COMM,DEPTNO'; 14 for i in 1..v_emps.count 15 loop 16 v_clob := v_clob||v_newline|| 17 to_char(v_emps(i).empno,'fm9999')||','|| 18 v_emps(i).ename||','|| 19 v_emps(i).job||','|| 20 to_char(v_emps(i).mgr,'fm9999')||','|| 21 to_char(v_emps(i).hiredate,'YYYYMMDD')||','|| 22 to_char(v_emps(i).sal,'fm99999')||','|| 23 to_char(v_emps(i).comm,'fm99999')||','|| 24 to_char(v_emps(i).deptno,'fm99'); 25 end loop; 26 -- write the CLOB to a file 27 DBMS_XSLPROCESSOR.clob2file(cl => v_clob, flocation => 'TEST_DIR', fname => 'myfile.csv'); 28* end; SQL> / PL/SQL procedure successfully completed.
-
I am running windows XP. I try to install the upgrade to windows 7. I was on the phone with technical support of 4 - 5 times, and they may not always help. There seems to be a problem with the administrator and with not not permission to create a file? I have a HP desktop computer. Can anyone help?
original title: help with Windows 7 install
Hello
· Account administrator that you use?
· You have the disc to install Windows 7 or upgrade disk?
Follow these steps and check if that helps.
Step 1:
To see if your PC is ready for Windows 7, download free Windows 7 Upgrade Advisor. It scans your PC for potential issues with your hardware, devices, installed programs and recommends what to do before upgrade you.
Windows 7 Upgrade Advisor
http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor
Step 2:
Follow the exact steps in this article and check if that helps.
Upgrade Windows XP to Windows 7
http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7
Note: Make sure that you back up all important data on the computer before you install Windows 7.
-
Seeking help with a problem with the LRI use LR CC on a laptop, when you try to export a picture to an external hard drive, I am now without apparent reason to get the following message."Could not create a respondent JPEG limit you 92 k Bytes.Please increase the size limit files. (1)......I tried to increase the size of the file several times,I left LRI restarted the computer.Any help or advice for this problem will be greatly appreciatedThanks in advance@stu
Not because of the number of pixels, in this photo and the chosen level of quality there is no possible way to create a JPG file to the size of file you requested. You must change your export settings.
Show us a copy of the export dialog box, so we can see clearly the part file setting and the size of the Image.
Also indicate the number of this image (width and height) pixels after cropping (as appropriate) and prior to export.
-
I have problems with the form widget. When I created my forms, I need to leave out the line, one email because my client does not want the message line and two because those who have tried to fill the online form cannot submit because the 'email' box keep rejecting their email address valid. And I just tried to remove the line in my form and it does not allow me to delete or to mark it as not necessary either.
Currently, there is no way around the field email forms of the Muse. Another option is to have a look at Jotforms or another third-party provider of shape that Muse has widgets for.
-
Problem with the DATA types, in a UNION
Hello
I m trying to disply a custom message when no data found using the structure below. Unfortunately I ve you have a problem with the data types I im trying to union
I tried different types of data in the 2nd SELECTION tool but the rest of the problem. Help, please.
SELECT HOSP_NAME 'HOSPITAL' DOC_SUR 'NAME', 'NAME' DOC_NAME, d.DOC_ID ID, diagnosis
H., DOCTOR d, (SELECT d.DOC_ID, COUNT (d.DIAGN_ID) diagnosis
OF PATIENT_DIAGNOSIS d
GROUP BY d.DOC_ID)
WHERE diagnosis > 1
UNION ALL
SELECT TO_CHAR ('test'), TO_CHAR ('test'), TO_CHAR ('test'), TO_CHAR ('test'), 0
OF THE DOUBLE
If NOT EXISTS (HOSP_NAME 'HOSPITAL' 'NAME' 'NAME' DOC_NAME DOC_SUR, d.DOC_ID ID, diagnosis
OF ΝΟΣΟΚΟΜΕΙΟ h, ΙΑΤΡΟΣ d, (SELECT d.DOC_ID, COUNT (d.DIAGN_ID) diagnosis
OF PATIENT_DIAGNOSIS d
GROUP BY d.DOC_ID)
WHERE diagnosis > 1);
ORA-01790: expression must have same type of data, matching expression
01790 00000 - "expression must have the same type of data, matching expression.DOC_SUR 'NAME' DOC_NAME 'NAME', ID d.DOC_ID, HOSP_NAME "HOSPITAL", diagnosis
What is the data type for these columns
To_char('test'), to_char ('test'), to_char ('test'), to_char ('test'), 0
What you're doing here 'test' is already a character. Why do you use TO_CHAR?
-
Problem with the CLOB data type.
Greetings,
I am facing a problem with the CLOB data type. I know that the CLOB data type is 4 GB (I use Oracle 9i). But in the Pl Sql procedure, I can only store 34305 size for a CLOB variable character data.
This is the test script that I am trying to run.
DECLARE
-Local variables here*.
I have INTEGER;
C_1 CLOB.
BEGIN
FOR Rec IN (SELECT
*
ACCORDING TO THE TABLE)
LOOP
C_1: = c_1 | Rec.Clo_1;
END LOOP;
EXCEPTION
WHILE OTHERS THEN
Dbms_Output.put_line (SQLERRM);
END;
Here variable C_1 range value 34305 good character regardless of type CLOB. Now the above script fails if query my buckle - huge number of return values. It is throwing the exception "error during transfer of files ORA-06502: PL/SQL: digital error or value."
He would be grateful if someone can help me on this.
Thank you.You are probably better off using DBMS_LOB.append, instead of the concatenation of varchar2 (|).
And... take off your when-other Manager exceptions, please...
-
I am trying to publish in my domain on windows server, but I have a problem with the form...
The server must be linux to work the form?
Thanks in advance for your help...
Thank you Brad... but how can I understand if a Linux server support? I try to do something in particular?
-
Problem with the published parameters between the movement of FCPX
Hello
I have a little problem with the settings published between the movement at FCPX.
For some reason, the published parameters have different values within FCPX in movement.
For example, in motion, a parameter is - 187.04 and in FCPX is-0,19. What are the parameters of position for CSOS.
If I try to change this setting in FCPX, the application crashes after 10 seconds or less.
No idea what is causing the problem? I re-edited the effect several times, same result. The software that I use is FCPX 10.2.2 and 10.2 of the Motion.
MOTION
FINAL CUT X
Thank you.
The values that you have published on the move have been compared to this project that you created. The values shown in FCPX are "consistent" with any project that you create. Often, you will see the center screen is 0.5, 0.5. Left and below are 0, right and up are 1.0. Or you could see Center of 0.0 and a range between - 0.5 and 0.5. Sometimes, you will see the numbers on the scale of some sort of percentage (vertical values will be 0-100 [%] and the horizontal will be based on the aspect of the project, for example, horizontal will be between 0 and 177.7778 for a project of 1920 x 1080, etc..) It will depend on the type of object and the parameters associated with what you posted.
If you want to "correct" values in FCPX, you will probably need to rig settings, otherwise, just live with it.
For what is * why * your model crashes FCPX, that will be another reason and not the difference in the numbers. So, can we get more information on the model?
To use specific fonts?
You publish alterations settings?
Anything out of the ordinary?
Maybe you are looking for
-
iTunes 12.5.1.21 (September 2016) always forgets settings
Since the installation of iTunes 12.5.1.21 I agree license and give/refuse Apple permission to share the details of my library every time I start up iTunes. He forget also all my settings as Shuffle/Albums. I am running Windows 7, perfectly up-to-da
-
What cooling modules are comaptible with Satellite P105-S9312
I need to change computer fan laptop P105 procesor.Can you tell me what laptop Toshiba model have the same cooling fan as in P105?
-
Hello We have installed a HP T610 with ThinPro 5 thin client. Now I have problems with Lync on XenApp. Each call to Lync loses audio connection after a few minutes. When I try to watch a video or listen to an mp3 audio works normally. So I don't know
-
He wouldn't let me enter the product key provided in the box of Windows Vista Edition full Microsoft. ? How can I rectify this?
-
My xbox 360 slim will not connect to any kind of internet wired or wireless
Anything and everything that's changed it happened recently I also have the first version of the xbox 360 and the wired connection works fine, it won't even not recognize the network.