Problems with the disk drive - DVD playback

Similar Questions

• "A problem with the display driver.

  Recently, I get an error message whenever I open Photoshop CS4. It reads as follows.

  "As Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Visit the Web site of the manufacturer of the video card for the latest version of the software.

  "GPU improvements can be enabled in the Performance preferences panel."

  I checked the graphics cards in Device Manager, and when I tried to update the software, it told me that I was aware.

  • OS: Vista Edition Home Premium
  • Dell Inspiron 1520
  • Display driver: NVIDIA GeForce 8400 M GS

  Sincerely, Danny

  Hello

  Try to update your display manually driver and do not use the analysis of the drivers on the manufacturer's website either.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• my computer asks me to fix a problem with the graphics driver intel but windows tells me solution can not be downloaded

  computer crashed and rebooted itself. I first started in safe mode, and the computer did not find any problems but had sent a report anyway.

  To restart normally, the center of the action (or as I would say, Center!; - p), has been asking me to scan with windows defender and a problem with the graphic driver intel. Scanned well, but to solve the problem, said action solution Center could not be downloaded. I am most definitely connected to the internet and have tried to solve this question many times during approximately the last 18hours?
  Help would be much appreciated?

  Good suggestion but I tried this, had to go the manufacturer of the laptop, but still no luck. Think he was playing tricks on me in any case, as seemed to be resolved with a full audit of the system and diagnosis.

  Thanks for the effort though...

• I get the message: Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Visit the Web site of the manufacturer of the video card for the latest version of the software.

  Photoshop has been giving me the warning:

  Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Visit the Web site of the manufacturer of the video card for the latest version of the software.

  Also other programs are affected.  I suspect a recent download of Adobe.  Can anyone HELP.

  No, it has nothing to do with updates of Adobe. There is a problem with your video card driver.

  Go directly to the Web site of the manufacturer of the GPU for updates (not Microsoft, not a System Builder).

• Photoshop has encountered a problem with the display driver

  I've updated photoshop on my mac last night as it kept prompting me to do, and I have an exam tomorrow, which requires the use of photoshop. When I open photoshop this morning the following message appears:

  "Photoshop has encountered a problem with the display driver and has temporarily disabled the improvements using graphics hardware. Visit the Web site of the manufacturer for the latest version of the software. For more information, visit: http://www.adobe.com/go/photoshop_gpu_cc_en'. '.

  Can someone help me with this? IT IS URGENT!

  The problem is the driver for your video card, no Photoshop.

  Update the video card driver from the website of the manufacturer of the GPU (NOT Microsoft or a system integrator).

• Removal of security icon to remove a mounted cd/dvd drive that can not be delete. also the problem with the apple driver.

  Vista Home premium

  64 bit

  HP pavilion dv4-1220us

  It happens when I went to open I tunes and he indicated a problem with the cd/dvd and then I noticed security remove the icon at the bottom of the screen, attended safe remove and it delete my CD-ROM drive mounted cd/dvd look no further and I notice this driver is part of apple who was a pilot of speed indicating this driver will remove your drive of cd/dvd rom IS NOT WORKING WITH some programs installed.  I contacted apple, we have deleted the driver and complete the process with the driver of the machine. Now, this does not take care of the security delete icon then tech apple tried to help and communicate with Microsoft or hp.

  RESTORE MY COMPUTER SEVERAL TIMES, THIS ICON IS STILL THERE.

  DOWN MY BIOS AND THE ICON IS STILL THERE.

  THIS SCANNER DRIVER AND THE ICON IS STILL THERE.

  Security delete icon States: remove TSST CORP CD/DVD TS-L633L ATA DEVICE READERS of CD-ROM/DVD-ROM if I hit remove it will remove my CD/DVD-ROM DRIVE.

  I went on my computer and click on my cd/dvd rom drive and went to properties and that's what I found below.

  1. FUJITSU MHZ2250BH G2 ATA HARD DRIVE: WENT INTO PROPERTIES TO DISPLAY DRIVERS, IT HAS A HPDSKLFT. SYS DID NOT SIGN THE OTHER TWO DRIVERS ARE THE SIGN. ENTERED DRIVERS FILE AND INSTALLED THE SIGN AND IT IS SHOWING NO SIGN, ALSO WITH HP ASSIST THIS HARD DRIVE IS DISPLAYED AS 0 FAILURE AND DISK.

  2 TSST CORP CD/DVD TS - L633L ATA DEVICE DVD/CD-ROM: ENTERED VIEW PROPERTIES PILOTS AND THIS ONE HAS THE DRIVER OF THE VEHICLE AND A DRIVER.

  At the moment I'd hide so I does not uninstall my cd/dvd drive.

  Do I need another hard drive?

  Is this something with the Bios?

  Apple has tried to help with this driver of train that I'm not sure that this problem is still with this gear or what?  This is the site about the problem to apple and the site of heavy plant driver.

  http://www.GearSoftware.com/support/drivers.php

  http://www.GearSoftware.com/wiki/index.php?title=CD/DVD_drives_disappear_after_installing_iTunes

  http://support.Apple.com/kb/TS2308

  http://www.GearSoftware.com/wiki/index.php?title=drivers:_Windows_ - _Updating, _etc, _64_bit_versions, _removing

  Hi Mamalasting,

  I'd say Hewlett-Packard to visit support website and check if they have the latest drivers for the DVD player.

  Reference:

  http://www.HP.com/#support

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Dual booting - problem with the disk when trying to start windows

  original title: problems with dual boot.  Windows does not play well with others.

  Hello

  I have Windows Vista Home Premium 64-bit included with the computer.  I installed Fedorah and it works on my computer.  When I installed it, but I had my hard drive partion.  I left most of the hard drive (about 400 concerts) as it was, when I booted up Fedorah worked well and gave me the option to boot or windows.  When I started in the window, however, it wouldn't let me start my computer, it says I have a problem with my drive.  With XP, it gives me no problem, I didn't ignore the disk check, but with Vista for some reason it doesn't let me start.  It gives me a few options of restoration to the previous status confuses the computer he says I manually type in which windows in the command line.  I don't have my windows CD, the only other option that I have that seems to work when I click it is restoring to factory fault which I don't want to do because I don't want to lose all my files.  Please tell me what I need to do.

  http://Fedoraforum.org/

  Fedora forums at the link above.

  A refund Stsrtup of Vista Disk link.

  Download the 64-bit on the right.

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  See you soon.

  Mick Murphy - Microsoft partner

• Problem with the disk check.

  32-bit Vista Home Premium:

  About 6 months ago, I ran a Check Disk from my C drive (using Vista error checking tool) and checked the two boxes before starting (fix Auto file system and search for errors / attempt to recover bad sectors).

  He ran through the 1 5 6 controls without finding an error.

  On the 6th and final verification that it is running, it hung (or the 4th of 5 controls it works - do not remember if it is 5 or 6 it works). According to me, he started the final control, but stopped and none did not move. A few hours later he still hadn't moved, so I did a hard stop.

  Fortunately, everything was fine when I rebooted.

  I use the computer since then without problems/errors obvious hard drive, but I'm afraid to run another check of the disk, even though I would right now.

  Suggestions are welcome as to what might have caused the shot, and if I do another check of the disk.

  Yes, it's essentially the same command.  Personally, I never use the other method - I just use the one that I you provided.

  : You are right about the meaning switches - you already know or you're an awfully good guesser.  Since you have expressed interest, here's more information on CHKDSK you might find of interest with other switches and guidelines and some good information on how it works and how to use the results: http://www.vistax64.com/tutorials/67612-check-disk-chkdsk.html.

  If you cannot complete a cHkdsk on your hard drive, then there is a problem with the player that must be resolved before it is any worse.  I would definitely give it another chance and also run the diagnostics that I recommended in a previous post.

  I hope this helps and I hope that the test completes successfully this time.  If this isn't the case, I hope that the diagnostic test identifies the problem and it can be repaired than replaced (even if it's pretty rare - usually if it goes wrong it must be replaced).  If this is the case, I would as soon as possible to ensure that it is not so bad that you can no longer access the drive at all - but then again, there may be nothing wrong and we could be worrying for nothing but a bad block or two which is nothing to worry about in itself.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Satellite L750D-1FD - problems with the display driver

  I got this laptop from my uncle and it was filled with junk and crapwares so I did a clean reinstall and upgrade Windows 7 Home to ultimate. I have a problem with the GPU, windows does not recognize it, or doesn't fly chart AMD.
  Processor is AMD A8 - 3520 M APU, and I think that the GPU is a Radeon HD 6620 G or something before the re-installation. I can't change the resolution, it stuck at 800 x 600, memory shows by n/a, Direct X features are not available, not from the downloaded display driver Toshiba worked.
  Dxdiag appears to the:

  Name: Standard VGA Graphics adapt
  Manufacturer: Advance Micro Devices, Inc.
  Chiptype: AMD ATOMBIOS
  : Type DAC: 8 bit
  Memory Approx.Total: n/a
  Current display mode: 800 x 600 (1 Hz)

  It nothing and can do with this laptop now because the GPU does not work as expected. Please, help me to solve this problem.

  Hello

  I found only Satellite L750D-1FD so I think you have this model. I want to help you on any other way. Here is the correct order of installation for Win7. Please check and install all the available stuff you can find on the download page of Toshiba - http://www.toshiba.eu/innovation/download_drivers_bios.jsp

  Win7 SP1
  4.9.2.0 TOSHIBA supervisor password utility
  TOSHIBA HW Setup Utility 4.9.2.0
  TOSHIBA Assist 4.02.02
  TOSHIBA ReelTime 1.7.18
  AMD driver 1.0.0.52 xHC
  8.834.1 - 110420 a-118118C-Toshiba AMD display driver
  TOSHIBA value added package 1.5.10.64
  ATI HDMI Audio Driver 7.11.0.7710
  Conexant Audio Driver 8.51.1.0a
  Wireless LAN driver
  Synaptics Touch Pad Driver 15.2.11.1
  V4.07 Bluetooth Monitor
  Atheros Bluetooth Driver Package v1.0.7 Filter
  Battery Bluetooth for Windows by Toshiba v8.00.06 (T)
  Atheros LAN Driver 1.0.1.50
  Card reader Realtek 1.0.0.14
  TOSHIBA 1.0.4 Wireless LAN indicator
  TOSHIBA Sleep 1.4.2.8 utility
  3.1.8 TOSHIBA face recognition
  TOSHIBA eco Utility 1.3.2.64
  TOSHIBA HDD/SSD Alert 3.1.64.8
  TOSHIBA PC Health Monitor 1.7.7.64
  ConfigFree 8.0.38
  TOSHIBA Web Camera Application V2.0.0.21
  TOSHIBA V4.00.7.01 VCR - HAS
  TOSHIBA resolution + plug-in for Windows Media Player 1.1.0
  TOSHIBA Disc Creator 2.1.0.9 for x 64
  TOSHIBA Network Device ID registry setting tool 3.0.32.4 - 16_wMSI
  TOSHIBA Media Controller 1.0.86.2
  TOSHIBA Media Controller plugin 1.0.6.1

  If you need assistance more let us know.

• Problems with the graphic driver for Elitebook 8460p

  Hello

  I m of the problems with the Elitebook 8460p driver display. The latest version (15.28.20.64.3347), published on 16 June 2014 have some problems on the laptop. When the laptop is running on battery screen suffers from flicker and damaged graphics, as you can see in this video:

  https://www.YouTube.com/watch?v=gQ1w0aOaF7A

  (you can see the flickering between 0:20-0:22)

  I contacted with support local hp and send me a COMPUTER technician, who has changed my motherboard and CPU, but nothing worked. I tried to contact with intel for support (the issue is present with drivers intel non - oem), but they are sending me to the OEM. I would like to have a real driver that works with the system (3347 is a driver of the year), is it possible?

  This isn´t of question at all in linux drivers, more change motherboard I totally ignore a hardware problem.

  I can provide feedback to any solution.

  Thank you!

  Another update:

  Found a solution to this thread (which I started) in the forums of intel:

  https://communities.Intel.com/thread/48327?start=0&TSTART=0

• Issue of 'no networks detected. Problems with the AR5BWB222 driver for WiFi adapter. Help, please!

  Hi all

  I need your help!

  then a few days ago my wifi started playing on my acer Windows 8 V5-552 and I have decided to update the driver for the card. I did this by unistalling and re-istalling the driver for the Atheros AR5BWB222 map I downloaded from this site acer very (it turns out it's the same version), now I have no WiFi connection at all (I am currently using ethernet cable but I need to be mobile around the House!). Troubleshooting does not help and said "there could be a problem with the driver for the WiFi card" and when I click fix problem there is no NOTHING (why did even give the option?). Did a system restore and that didn't work because of my antivirus and there still nothing when I turned antivirus off the coast. Then I read a lot of forum preveous questions on this driver and no solutions helped, maybe because everything is last year.

  I really want to avoide a factory reset as I have some programs here that will be very difficult to acquire again.

  If you're still here after my speech, I am greatfull and also want your knowledge and advice about this superior! Please help me!

  What antivirus program you are wrong with turning off? I know that some may be stubborn. If the AV program refuses to turn off this feature with a selective startup in MSCONFIG, then you can try to uninstall it completely in the PANEL. Then try to restore to the previous new date

  Jack E/NJ

• Blue screen on startup... problem with the display driver?

  I have been using a Dell Inspiron 14R (N4110) laptop computer since 2010 without any problem.

  The laptop was purchased online from Dell and came with

  (1) Windows 7 Home Premium 64-bit and

  2) AMD Radeon HD 6470 M - 1 GB display card.

  Recently, I had a problem where my laptop just wouldn't start, showing the blue screen every time it tries to start. The blue screen mentions a problem with the file atikmpag.sys I understand is the driver for the AMD video card.

  If I delete/rename the files atikmpag.sys and atikmdag.sys (via secure boot mode) in C:/windows/system32/drivers, the laptop (not) start, but obviously does not recognize the graphics card.

  After a lot of unsuccessful trials debugging on mine (including trying to upgrade the drivers to display etc.)., I reinstalled the operating system and the drivers provided with the original kit (just to eliminate any possibility of an upgrade that went wrong). However, I still see the issue.

  That means there is a hardware problem? or a BIOS problem?

  Thank you

  R.B.

  Guys, the problem you describe is actually a hardware failure. There is nothing you can do except replace a motherboard for laptop, or taken some advanced technicians, COMPUTING which will replace or chip GPU reball.

  I have the same a laptop similar (Inspiron N5110), with the same problems and these problems - all started yesterday. Do not waste your time, just reinstall OS, then install display drivers, which are available on the official site of Support of DELL and after that - if it's not working, just do what I said.

  Generally these are consequences of an overheating laptop, but that it was certainly not my case (I did regular checks), I could even bet on chips quality GPU, which has been used in the manufacture of this model of laptop... again...

  UPDATE: Okay, last night was a long night for me and I can confirm finally - who's * chip AMD, which causes the blue screen, you mentioned. I disassembled my N5110 faulty, armed with a heatgun, Probe temperature (probe) and tons of aluminium + some flow of brazing, I made a fairly quick reflow and the result is just what I expected - everything works perfectly again, with the same configuration - even with the same installation of Windows, which has been to launch these blue screens. There are now no blue screen at all and portable computer performance as new.

  Apparently bad welding, when this laptop was manufactured, is the exact reason why we are where we are. The BGA chip was not dead at all (it was just poorly soldered). The same story, including HP and a bunch of other companies had some time ago with these NVIDIA chips (I know, some of you know what I'm talking about).

  CONCLUSION: Integrated DELL diagnostic software is useless against the detection of defects with a discreet graphics AMD card. Problem was not in the software or drivers - it was just a poorly welded chip (I regularly cleaned my laptop dust, so overheating is not an option here).

• Problem with the disk free space.

  I use the power of fire 7100 (the 5.3.0.3 Version of FireSight 5.4.1.7 sensor Version). I have political problems that apply to the device. And is unable to update sensor for the newest version. Cisco support community help me! Thank you! They and I think that this problem can be in the use of the disk.

  What I oh sensor:

  Size of filesystem used Avail use % mounted on
  / dev/sda5 2.9 G 562 M 2.2 G 21%.
  / dev/sda1 99M 37 M 58M 39% / Boot
  / dev/sda7 67 67 G 0 100% but
  No 1.9 G 136 K 1.9 G 1% / dev/shm

  May be the problem with the records of Volume.What I could check and delete? Thank you!

  Hello team,

  * Could you please check the following points: -.

  CD/var/tmp /.

  du-sh *.

  You can clear the/var/tmp/en using the following. Files under/var/tmp temporary files are. :-

  rm - rf *.

  It is a known bug where the but gets completely due to Apply_ files *.

  * Also check the following points: -.

  CD/var/sf/updates

  Remove the old patches if there are.

  * Check the following backup folder and the folder of detection engine too.

  CD/var/sf/upgrade_backup

  du-sh *.

  CD/var/sf/detection_engines

  du-sh *.

  Rate if this helps you.

  Concerning

  Jetsy

• Photoshop has encountered a problem with the display driver cs6 - win7 64 bit

  Hello

  I installed collection CS6 Mater, whan I tried to enter in photoshop I got this window «photoshop has encountered a problem with the display and temporarily disabled driver development using graphics hardware...» »

  Whan I get is window, the "parameters of the graphics processor is gray - «photoshop detected a problem in your display driver...»» »

  I have laptop with AMD Radeon R7 M260

  Win7 64 bit

  PC Toshiba laptop satelite l50 - b

  Hi doriv,

  • Update your graphics card driver.
  • You have the graphical configuration Swichable?
  • As Mylenium says you must add this parameter in graphic control panel so that Photoshop can detect your card.
  • Open graphic switchable Configuration and add sniffer.exe and Photoshop.exe (from C:\Program Files\Adobe\Adobe Photoshop Cs6). See graphics switchable troubleshooting questions unde... | Community

  

  Kind regards

  Assani

• Satellite M30 - problem with the graphics driver and Quicktime movies

  I just installed a 40 GB to 80 GB hard drive and installed all the drivers in the correct order, as indicated by toshiba. Everything works well except the used for Quicktime .mov files. All I get is audio but no image - other than a colorful blur screen!

  I think I've isolated the problem to the graphics driver. Whenever I turned off / uninstall the driver dedicated for the graphics card FX 5200 GP (version 4.6.44) Quicktime files work fine. It is only when I installed the dedicated driver problems occur!

  Can someone tell me why this might be?

  Hello

  Do you use the graphics driver from the Toshiba driver page?

  Try to use the QuickTime Alternative 1.77. In this version the codex QuickTime has been updated.
  This version uses these features:

  -Media Player Classic [version 6.4.9.0 + SVN build 2006-12-24]
  -Codecs QuickTime [version 7.1.3.100]
  -QuickTime plugin for Internet Explorer
  -QuickTime plugin for Opera/Mozilla/Netscape
  -Extra plugins for QuickTime
  -QuickTime DirectShow parser
  -Wrapper DirectShow QuickTime decoder
  -CoreAVC 0.0.0.4
  -CoreAAC 1.2.0.575

  check it out...