Problems with the files of FoxPro 2.6 in Windows Server 2008.

Similar Questions

• I just did a check of norton power Eraser which revealed that I have a problem with the file ntsd.exe.

  original title: problem with file ntsd.exe

  I just did a check of norton power Eraser which revealed that I have a problem with the file ntsd.exe. Does anyone have suggestions about what to do to fix it? Thank you very much.

  Hi JohnABuckley,

  • Are you facing any problem on the computer?

  Ntsd.exe is a process belonging to the Microsoft symbolic debugger that lets you debug applications in user mode.

  As the link below, it says that there is a risk that Norton Power Eraser can select some legitimate programs for removal. You should carefully review the analysis results page before deleting the files. I suggest that you don't delete the file unless you are facing problems with the computer.

  https://www-secure.Symantec.com/Norton-support/JSP/help-solutions.jsp?LG=English&CT=us&docid=20100824120155EN&product=home&version=1&PVID=f-home

• When starting a warning pops up saying he had problems with the file: XBD EXE that can be done to correct it?

  When starting a warning pops up saying he had problems with the file: XBD EXE that can be done to correct it?

  Hi r13hunter,

  It seems that some programs running on the computer fails to load at startup of the system. Try these steps and check the result.
  Step 1: Find the program that causes this problem and delete or fix
  a. Click Start, type msconfig and press to enter.
  b. click on Startup tab, in the list, search for the path of the xbd.exe file and the associated program.
  c. Once you have found the path of the item and the associated program, repair or reinstall the program.
  See Uninstall or change a program

  Step 2: If the problem persists, perform the clean boot to find this good program that is causing the problem to the system startup
  a. open the article: http://support.microsoft.com/kb/929135
  b. Article, follow "step 1: perform a clean boot" the implementation of these measures will disable all programs not Microsoft currently running on the computer.
  c. restart the computer and check if the problem persists.
  d. If the problem does not persist in the boot, it means that some programs non-Microsoft is the source of the problem.
  e. to find the program that is causing the problem, try "step 2: enable half the services" to "step 6: resolve the problem.
  f. Once you find the culprit, check if there is any updates to update or fixes to the program. If you find, install them and check the difference or reinstall the latest program.
  g. Article, follow "step 7: reset the computer to start as usual.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• 7 error "Paris 7.2.241.1enRegInstaller.exe of work and has been closed." A problem with the application to stop functioning properly. Windows will notify you if a solution is available.

  Original title - 7.2.241.1enRegInstaller.exe

  Hello.

  Today, JUST after I "Set Windows to update," twice, I got the disconcerting message:

  "Paris 7.2.241.1enRegInstaller.exe of working and was closed".

  A problem with the application to stop functioning properly.  Windows will notify you if a solution is available. »

  Any wisdom or experience with this?  I'm on a 64-bit HP Pavilion older (dv7-1245dx) with this OS JUST-update Windows (Vista Home Premium).

  Thank you.

  GIES W

  The solution has been found just uninstall bing bar, restart the computer, and if you want just bing toolbar to reinstall. This easy solution my system fixed.  Bing has again reminded all my points that I have amassed

• Start the UCM 11 g and IBR on Windows Server 2008 when you start the server

  Hello
  
  I installed ucm 11g with an inbound refinery on a 64-bit windows server 2008. The AAU and the bovine infectious rhinotraecheitis are supposed to start automatically after the server is running.
  
  1. I put the startWeblogic.cmd and the startNodeManager.cmd in the directory Autostartup. The weblogic and the nodemanager are starting very well in a denial of service console.
  2. I tried to start the University Complutense of Madrid with the following startManagedWeblogic of the UCM_Server1 command. Then he asks me a username and password and then, he throws a java exception and the UCM_Server1 will not be started.
  
  The current situation is that the weblogic and nodemanager starts automatically and the UCM_Server1 and IBR_Server1 must be started manually.
  
  What is the usual way to start the AAU automatically? Can we establish some Windows Services?
  
  Greetings
  Brahim

  The best way is probably a Windows Service. Here's the Oracle documentation on how to do it.
  http://download.Oracle.com/docs/CD/E12840_01/WLS/docs103/server_start/WinService.html

  You can also try the Windows Task Scheduler. I heard that this works well (even if a Windows Service would be better).
  http://www.windowsnetworking.com/articles_tutorials/working-Windows-Server-2008-Task-Scheduler-part1.html

  This post shows how to store your WebLogic login information encrypted on the disk.
  http://corecontentonly.com/2010/07/27/start-WebLogic-managed-server-without-username-and-password/

  Jonathan
  http://www.corecontentonly.com

• Problem with the file naming

  I can change my names of files successfully, mp3s to be precise, uniformly. Windows Explorer or Altap Salamander, there really is no problem with my file name.

  The problem starts to appear when I put my mp3s in my playlists (VLC, WMP, media player in my cell phone). The old file name keeps showing even though I have already changed the original/source file.
  For example, a song I downloaded bears the title "WTF * Chris Brown-int ' love ' so I changed it to 'Chris Brown - International Love' since that's how I name not all the thousands of my mp3s. But when I added the song to my playlist, the original title is one that appears and not the new. This case is the same with most of my Media Player.
  Is it possible for me to keep my desired/preferred file names when using the Media Player files? It's really so frustrating.

  Usually, media players like WMP does not show the name of the file of the song, but display the title and artist in the song tags (also known as metadata). To change these tags in WMP, add your songs to the library WMP library, right click on the tag you want to edit, and select Edit.

  You can also change the labels of the song with external tools such as Mp3tag.

• I ran CHKDSK, the report tells me I have problems with the file system, usn journal. ___

  I ran CHKDSK, the report tells me that I have problems with the sys file. I ran CHKDSK/F, it is said it fixed the problem but I ran CHKDSK again and it shows that the same listed the issues.

  Describe how you run chkdsk.

  That is what the report said: you have problems with the sys file?

  CHKDSK examines the disk space and use of the disk for the table of allocation of files (FAT) and NTFS file systems. CHKDSK provides information specific to each file system in a situation report. The report shows the errors found in the file system. If you run chkdsk without the /f on an active partition command line option, it can report errors because it cannot lock the drive. You should use chkdsk occasionally on each disk to check for errors.

  If you run chkdsk from a command prompt while Windows is running, it can report errors or it may not report errors - and it may report different
  Errors each time you run.  If this is the case, it could just be the way you run chkdsk.

  Here's how Microsoft explains this observation:

  "... CHKDSK may report that the disc is damaged, even when there is no
  current real corruption. This can happen if NTFS happens to modify
  areas of the disc on behalf of some programme activities that CHKDSK is
  review at the same time. To check a volume correctly, the volume
  must be in a static state, and the only way to ensure that the State is
  to lock the volume. CHKDSK only locks the volume when /F or/r (which
  involves the 'F') is specified. For example, you may need to run CHKDSK more than
  time so that it can complete all the steps in read-only mode. »

  If you run chkdsk from a command prompt, you are not the necessary static state and you can encounter errors "when no real corruption is present. This is how it works when you use this way.  Any changes made to a NTFS file system modifies the USN Journal.  If you are not in a static state, your USN change Journal probably all the time, so what you see (says something like that) can be quite normal.

  Two ways to ensure that you are in a static state is to run chkdsk from the Recovery Console or to schedule a chkdsk to run the next time that the system
  Restart by answering Yes to the question:

  Would you want to check this volume to be the next time the system restarts?

  If chkdsk reports errors when running in a static state, the errors should be investigated, resolved or explained.  This may take several
  chkdsk runs all of the issues and some problems cannot be resolved by chkdsk.

  If chkdsk runs the next time the system is restarted, the activity and the result will be displayed in the application event log.  Look in the Application log for
  Winlogon events and a source have the date and the duration nearby time chkdsk.

  It is in fact a chkdsk additional reading if you want to learn about it and it will explain everything you see and why your expectations exceed reality.

  Please vote my posts as helpful so I can get a lot of points. I'm saving for a pony!

• the problem with the wi - fi does not work on windows 8.1

  Hello dear forum users (sorry for the English, use a translator)

  I have a laptop HP Pavilion dv6-7055er, 8.1 Windows 64-bit

  Card Broadcom WiFi 802.11b/g/n 1 x 1 4313GN worked on windows 7, but fails on windows 8.1. Tried to find the driver on the broadcom , but not found. Device Manager indicates that the problem with a PCI device. Specifies no problems with the Wi - Fi adapter.

  What could be the cause and how to fix it? Thank you!

  It seems that your WIFI adapter is not supported by Windows 8.1

  There are a few options available.

  The first and simplest is to purchase a USB wifi adapter to plug into one of the USB ports on the laptop. I have a dual ASUS USB-AC56 band that meets the 802.11ac specification.

  The second option will be to take a look at the installed optional wifi adapters to see if they have Windows 8.1 supports, buy one to replace the Broadcom card installed with.

  Ok. The two following adapters are compatible with your laptop and Windows 8.1. They have a BIOS support.

  The Qualcomm Atheros AR9485

  The Intel Centrino Advanced - N 6230 WLAN module

• Problem with the display of a video frame in Windows Media Player 11 on Vista

  Hello

  I am having some problems with the Windows Media Player 11 on Vista. On my XP machine, when I discovered a video frame by frame, it works perfectly back and forth. However when I try to play the same video on my Vista machine, the button to the front of the image works perfectly fine but the previous image button takes video from 5 to 10 frames. Since I use my machine Vista more and need this feature often enough, it gets boring very quickly. It is a drive problem (since the same player works great under XP with the same video) and can be solved with a patch or some sort?

  Thank you

  Hello Helloaamir,

  Thank you for posting.  I understand the problem you are having, but I do not understand why in the need for these features.  Depending on what you're trying to do, may be able to use Movie Maker instead of it you also has characteristics of the image by image.  If you could include that you are using this feature, because I can give you a good alternative or possible difficulty of deliverance.

  Looking forward to help you any further. Zack
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Is there a problem with the slice of Service Pack 2 for Windows Vista?

  I had to reinstall Windows Vista Unlimited twice already.  This is because the installation of Service Pack 2 for Windows Vista.  I had everything, including Internet Explorer 8 is installed during the installation of the Service Pack 2 has crashed my computer, and I had to re - install.

  Hello

  Please read: information about Service Pack 2 for Windows Vista and Windows Server 2008
  Includes installation tips and Microsoft Support.

  Also Please read: "How TO solve IE8 installation problems"
  Includes installation tips and Microsoft Support.

  Hope this helps, Vincenzo Di Russo - Microsoft MVP Windows Internet Explorer, Windows Desktop experience & Security - since 2003. ~ ~ ~ My MVP profile: https://mvp.support.microsoft.com/profile/Vincenzo

• How do the automatic startup during application restart of windows server 2008

  That need to make application.exe restarts automatically restarts Windows 2008?

  Hello

  Given that the problem is related to windows server 2008, I suggest you post this question in the Windows Server Forums.
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• M200 problems with the file properties

  M200 with a GB of memory and all the usual gubbins. Recently applied SP2. also, I tried (without success) to uninstall this P in sw A Norton anti-virus. I usually prefer a combinaiton of McAfee and Zone Alarm 2

  Problem is that when I try and select the properties of a file (that is send via an infrared connection or attach it to a message recipient), the crashses of the Explorer window. I find myself also get accidents such as

  Delay (30000 milliseconds) waiting for a response from the WZCSVC service transaction.

  I thought at some point it might be a problem with ZoneAlarm but who have turned off with no improvement.

  Any ideas?

  Hello

  I don't know, but as far as I know you can remove the Norton if you check all entries in Add and remove programs in the control panel. One of my friends told me that there are a few entries, and you must be lucky to pick a good one. As TOS said trying to work through.

• The problem with the file sharing by mail from the contextual menu in the Finder.

  When I want to send a file by email from the Finder, I do a right-click on the file and choose 'Sharing'-> 'Mail '. I expect to see the new e-mail message with the attached to the message of failure.

  But nothing happens and the Finder stop responding and I have to "Force quit" them.

  My configuration:

  MacBook Pro (retina, 13 inches, end of 2012), 2.5 GHz Intel Core i5, 8 GB 1600 MHz DDR3, HD 4000 1536 MB, version OS X El Capitan 10.11.3 graphics card

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Problem with the file dialog box

  Hello erveryone,.

  My problem is quite easy... I try to use the file of dialogue vi of NOR and its work properly, but when I select a file using the double click, the second click is detected as a click on my Panel of...

  Example, if the file I select in the local file dialog box is justa button on my Panel (under the pop - up), the action for this button is run...

  I tried to disable my front panel when you use the dialog box, but it doesn't change anything.

  Someone there had the same problem? Anyone find a solution to this problem?

  Thanks for the help,

  Fabrice

  Hmm... What's not here? When the file in the dialog selected with double-click, and then disappeared with the mouse down, so dialogue, your dialogue control receives the mouse upward:

  Double click: mouse-> mouse-> mouse downwards upwards downwards (here missing dialogue)-> the mouse upwards (you got it). Nothing wrong. Can be inconvenient in some cases.

  Andrey.

• I have a problem with the files and folders on the comouter.

  Original title: files and folders to HELP you!

  Hello world

  I have never used before, so please bear with me!
  I really hope someone can help out me.
  I've never had a problem in 8 years when it comes to rename JPG files (or any files also), but a few minutes ago, I went to rename some of them, and I got the following error message: "If you change a filename extension, the file may become unusable.  "Are you sure you want to change it?"
  I have NEVER seen that before and I looked and can't find anything around him.  I noticed that all my files now have the letters "JPEG" at the end of their.  I don't know what is happening.  Any help you can give me would be greatly appreciated!
  Thank you and good night!
  (I use Windows XP 32-bit).

  Thank you very much for your quick response.

  However, I found by Google how to solve this problem, and he took every 15 seconds!
  It was just a box which should have been verified but was not.
  Thanks again!