Problems with the installation of windows updates and reboot the computer

Similar Questions

• Problems with my installation of Windows XP and my computer does not start on the CD.

  Hi, I need BIG help here please!... I wanted to do a fresh install of Win XP Pro, but my PC didn't boot from the XP CD... I changed the BIOS settings, the sequence start on CD, restart my PC and he kept boot from the HARD drive and the PC does not recognize that there is a CD-ROM drive. Once the start-up of the PC from the CD, I wanted to delete the partition and format the HARD drive, but it says "Setup could not format the partition...". "something like that... so what I did I have the PC from the boot CD, click in the command line and 'R' for repair, I wrote"format c:"and after that, I wrote" diskpart remove C:' so I deleted the old partition, create a new and when I wanted to install XP on it, I could not because the PC does not start from the CD... how can solve this? "

  Thank you!

  original title: HELP for the installation of Win XP.

  Hi Jorge,.

  So the only thing I can think is that it is a sort of master/slave thing.

  Your IDE HDD will be a Knight, probably alongside where the power cable is inserted, to dictate whether the player will be considered to be a master, slave, or cable select. Assuming that it is the only HARD drive in the PC, make sure it is designated "master". Then, in the BIOS, make sure that the boot order is specified as HDD0 first (as opposed to HDDx where x is greater than zero).

  In addition, assuming that the data cable is the new type of Ribbon with strands of 80, make sure that the blue connector of the IDE data cable is in the motherboard and that the end of the black connector is in the HARD disk and, if it is a two-disc data cable, do not use the gray connector.

  Tricky

• Photoshop is slow... I have no problem with the computer (windows 8) mine

  Photoshop C5 is a bit slow... no problem with the computer (windows 8.0)

  Hi maxarcitecture,

  Suggest you to reset the settings of Photoshop and then check

  Using Photoshop | Preferences

• Problem with VGA card after Windows Update

  Hi all.

  Today I start to address a problem with me second VGA card (Matrox G200 G2 + / QUADP-PL/7) after a yesterday updated windows.
  I am able to see the other 4 monitors, but with a yellow triangle.
  You thing has remove updates yesterday going to solve my problem?

  PS:If you have an another idea is welcome

  Thank you and best regards.

  Hello

  Please contact Microsoft Community.

  This problem may occur if the VGA card drivers are updated after the installation of Windows updates. I suggest to follow the steps below and check to see if problem persists.

  1. Click Start and stop in the search box, type Device Manager.
  2. On top, on the start menu, click on "Device Manager".
  3. In "Device Manager", double click "Graphics card" expand. "."
  4. Click on "display Matrox G200 G2 + / QUADP-PL/7 ' and click 'properties '.
  5. In properties, click on the "Drivers" tab and check if the option 'Return to the version' is 'active '. If so click on "Roll back" to restore the previous version driver.

  Note: If "Roll back" is greyed out, then see the article restoration of the system;

  Warning: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Important: try to restore your system to an earlier date when everything worked correctly.

  http://Windows.Microsoft.com/en-in/Windows7/products/features/system-restore

  Meet us, then we can help you further.

• New computer with 7 installed - tried windows update and stuck saying preparation set up windows

  Just bought a new Sony Vaio with windows 7 installed and went to windows updates, as they recommended. Updated and said to reboot. Now he's stuck saying prearing to set up windows. Not turned off your computer. Help please...

  Hello

  Welcome to Microsoft Windows 7 answers Forum!

  Here you need to start your computer in safe mode and do a system restore.

  Start the computer in safe mode and check the number.

  Follow this link provided below to start your computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  You have to try to perform a system restore to go back to the work settings, to do that follow the instructions below:

  1) click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  (2) in the System Restore dialog box, click on choose a different restore point and then click Next.

  (3) in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  4) click Finish.

  If you still have the problem then we will try to reset the windows update components and find the number.

  You must follow the link provided below to run the fixit which will automatically fix the problem if you find problems with the fixit, then you can follow the procedure to manually reset Windows component update.

  How to reset the Windows Update components?

  http://support.Microsoft.com/default.aspx/KB/971058

  Once the Windows Update components are reset, try to reinstall updates. To do so,

  1. open Windows Update by clicking Start , all programsand then click Windows Update.

  2. click on the option to change the settings in the left navigation bar. You will now be on a screen where you will be able to set up how Windows Vista download and install updates on your computer.

  3. Select updates but let me choose whether to download and install them. When you have finished setting options that you want, press the OK button to save these settings. You will now be at the main screen of Windows Update.

  4. in the left pane, click check for updates, and then wait while Windows searches the latest updates for your computer.

  5. you can then download the updates one or both.

  6. click on install updates to install updates currently selected.

  7. Repeat steps 5 and 6 until you get all the updates you want on your PC.

  For more information about installing the windows updates, see

  Install Windows updates

  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our Microsoft answers feedback Forumand let us know what you think.

• Could get a new router block printing? We had a lot of problems with the computer in the last week and a half. Bought new router and now the printer does not print. :-(

  (1) we went to DirecTV. Then the same day, our internet computer is down. I asked our current provider, Suddenlink, to let them know we had them to another - but we wanted to keep for the internet.

  (2) called DirecTV to investigate why our internet went down at the same time they installed? They said that they did nothing to cause that. We waited 5 days to make out and also install the third TV that was promised. The second tech gave things a lookover and said, once again, that there is nothing unusual during their passage to cause the problem.

  (3) called Suddenlink. They said it was the router. Called the people of Netgear. They said that the router was too old. We needed to pay an exorbitant sum for support and when I told him I'd rather just buy a new router and get free technical support for 90 days... and I personally do not have the credit cards in that time. (it's my mother s equip and I wonder it for the computer) when the guy told me that he could help and hung up on us, even though I was pleading for him to wait until I put my mother on the phone. (I'm in my 40s... not a kid).

  (4) Suddenlink called a few days later, when we got a new router (netgear brand NO!) Installed and I noticed that the 'ready' light was not 'on' on the modem. Their technology has said that he would check and call us in a few minutes. He did not.

  (5) the next day I called Suddenlink AGAIN. This time, I got a really nice customer service agent. She said she would send someone to check on it. It turns out that they had disconnected when I had called to pass only the TV.

  (6) in any case, we are finally online... only now... I can't the printer to work. :-(  This has worked before.  Could it be caused by the different router? I don't know about these things. I didn't even know what it was until someone at Radio Shack has explained to me. (I was not about to buy one at Wal-Mart - these poor people). The printer is a Canon Pixma MX340. We love him. The only thing is that it is difficult to clear the tasks or to reset. The only way to really do that is to simply pull the plug, unfortunately and restart the computer. But hey, it's a great printer, better than HP.

  We are under vista. The router is a Linksys wifi (which we have) N300 model E900.

  Of course I appreciate any help you can give. God bless you!

  Michelle and Ruth.

  Hello

  Thanks for posting in the Microsoft Community.

  I understand that you are facing problems with the printer in Windows Vista.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.

  Please follow the steps in the link.

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

• Problems with the computer automatically recording of surrounding sounds and play loudly on Windows 10.

  Original title: Sound

  Hey,.

  My laptop records the surrounding sounds and plays loudly and I have no idea how to turn it off.

  I hope someone can help me.

  ASUS X555L, Windows 8

  Hi Felix,.

  Thank you for your response with the current state of the question.

  I suggest you to make pregnant as default device and also keep microphone also disable.

  1. right click on the sound icon that is in the lower left corner of your screen under the system icons.

  2. Select the playback device.

  3. click on the Read tab, and then select a speaker from the list and then click set as default.

  Let us know if you need further assistance on related issues of Windows and we will be happy to help you.

• I have a problem with the computer work is not correctly after you install the KB2753842 update.

  This update of windows has been installed automatically today (22/12/2012) as the (successful with this date) shows on the Page update.  Since that it has been installed, the computer is constantly read/write on the disc at 100% at all times (i.e. non-stop).  Performance is significantly degraded.  I rebooted several times, whenever the system shows the updates are being configured on tap-dwon and commissioning.  I want to reinstall the update because I think that it was not successful, even if the display update Page shows successful installation.  When I try to find and remove the update under the Panel of control-> program and features-> Windows updates, this update is NOT displayed (latest updates are 13/12/2012).  How can I remove and reinstall this security update?  It is a BIG problem at the moment.  Computer is almost non-functional.  Thnx.

  Original title: update security for windows (KB2753842)

  Nirmal S, thank you.  System Restore did the trick.  I restored prior update checkpoint and then the system automatically re-installed the latest update (which is one I had a problem with).  Problem solved!  My computer working again 'normally '.

  Also, I learned a few new things about the updates and restorations, so...

  Bravo for Nirmal S!

  Kind regards...

• I have a problem with the computer is slow and does not file.

  1 of my pc and 1 another laptop, both with same OS - win 7 starter, atom and same ram and Ghz processor.

  The the Task Manager on the two of them performing at about 50%
  I use wifi and same place,
  always pages on my pc are load too late, manyatimes same gmail takes more than an hour to load or load never at all.
  Live TV on my pc crashes a lot and the clarity of the video is too bad, although the same graphics card, wifi, etc. are used.
  Any recommendation to get rid of these problems?
  2. some viruses had infected my pc,
  I tried to scan my pc and the USB with 2 antivirus free and pay different and even contacted the companies and sent them files. But I got no solution.
  On my pc, the files opens, show that a few errors before you open it then on my cell it do not open at all. Only shortcuts are displayed, while the USB is to have 4 GB of data.
  The companies had scanned all files that are intended for them and had recommended some solutions, but none of them worked and I was faced with the same problems.
  It was queries that I had sent to the antivirus company-
  10-20-bitdefender files that are
  > infected. They were initially on my USB, then I connected to another
  > pc. After that, when I connected to my pc, I scanned and that she was
  > no virus. Then the ameliiecouturiaux and the files whatever i seclect opened in a
  > new window and took that wasannoying time. So I copied all the files to my
  > pc, yet once scanned, formatted my USB and then comes the againNow copiedit the
  > problem - all the icons or folders remain the same with the name of the folders but
  > the files inside this foldergot automatically changed and I lost all my
  > data. Now, I can't find any of my files on my pc or my USB. PL send me
  > an email so that I canattach the files and send them to bitdefender. Dungeon of pl
  > secure these files. Some files have an another new error that I had
  > downloaded. More files will be downloaded once I have bitdefender recieveemail to
  
  > that I can answer. PL copy this message in its entirety and add this to your answer.
  According to my knowledge, 2 of my PC are infected and the virus are not getting detected by bitdefender on my PC1 but 4 threats have been detected on the laptop...

  The same files are include the other way on my other pc.

  Whenever I open the files, save option opens and a new file is saved with the file tha but they never get to open in word or powerpoint, only the backup option is displayed.

  The original files are protected by copyright and are lost. PL help me if possible to retrieve and delete all the files once the inspection is completed. You can forward this message to any authorized person.

  Attached files have changed to 1 or 2 k, but there was initially datas in a few MBs.

  201310131003535. I mentioned that somewhere I had formatted the USB key. Just before that, I had copied all files by selecting CTRL A and cut all the files in a directory on my PC. Then I opened the USB and no files were there. But always around 4 GB has been shown as being busy on the USB stick before formatting.
  My pc takes too long to restart, I tried a few 3 - 4 times and no updates have been installed or waiting to install after the 2nd time but when even he took more time than usual to restart and is compared to the other pc taking 2 X the time to restart, but two of them have installed bitdefender. Problem in my laptop toshiba, not pc lenovo, space time with more than 50 percent on the disk processor and Atom c.
  The files on my USB key are automatically replaced by shortcuts and so files open in a new tab and new cases opened are not those of origin who have been saved by me in this matter. Yet once I formatted and scanned, files, pc and USB but still facing the same USB key.
  Problems-

  1. all files are automatically displayed as shortcuts, even if I had pasted the original file

  2. once I click on open, I get an error and then after clicking on ok, some files get opened

  Before sending the email, I had formatted the USB scanned files on my HARD drive and then copied on the USB. The same problem persists. I think that when the files are displayed or open, the virus does something and change his behavior wrongly.

  1 bitdefender watch as new bitdefender is available, I click ok and repair wire starts and then it tells the system to restart.this cycle continues on the race

  2. 2 files are missing (attachment)

  3. could you send me the file by e-mail?  You can also download the link below.

  http://labs.BitDefender.com/

  because the webste or browsers (chrome, firefox) are not respongding.

  4. I could get these 2 points. Browse your computer to locate the removable storage device and right click

  its icon.
  3. in the shortcut menu, point to Bitdefender and select immunize it
  
  drive.
  I am able to open my pendrive ffrom on 1 pc but on my laptop, all the files don't appear as shortcuts 1-2 KB and can not access.
  zwhwenever, I click the icon, the window save under opens for all files.
  on this pci usingbitdefender antivirus am more 2013 16.34.0.1913 downloaded from download.com and the antivirus from bitdefender 60 seconds. 1.0.3.59
  my pc shows the USB key as safe, but laptop with 2 antivirus mentioned above are showing 2 virus - worm.vbs.ch (bitdefender 2013)
  using bitdefendr 2013 more on laptop, I tried to immunize the file but an error was encountered.
  the error is in German-
  Der process nicht auf die Datei zugreifen kann, da sie von einem other process verwendet wird. I closed all the files and tried to immunize the USB of the my computer without having to open the USB by clicking on it.
  Itried to remoe and atach the pendriveagain and even restarted the laptop, but the same error message appeared.
  Properties - 5.10 GB ref 7.89 GB, but when the USB wasopened, all files were only 2 or 3 KB of size.
  1 more problem-i tried to delete the files in quarantine but bitdefender stopped working and went off automatically.
  I copied all the files from USB to pc, they were 2.22 GB, then again, I copied them back after scannig and formatting of topendrive and it was only 1.44 GB
  BitDefender Antivirus 2013 never works and always displays the message to restart the laptop so that it can start working, but it neverstarts. But bitdefendeer 60 seconds work.

  LOL - install software Registry Cleaner to fix damaged or broken registry entries.

  More likely to worsen the situation.

• I added the latest version of windows update and now my computer guard cutting

  as soon as I added the latest version of windows update my computer started to slow down, and now he keeps just turn off

  Hello

  1. what update has the problem from occurring?
  2 are you not able to boot to the desktop?

  Updated version has a problem in the history of the update.
   
  a. open Windows Update by clicking on the button start. In the search box, type Update, and then in the list of results, click Windows Update.
  (b) in the left pane, click view update history.
  c. to display more information about an update, double-click it.

  Follow the steps below and the devil, if the problem persists.

  Step 1:

  Disable the automatic restart in case of system error. Prevents Windows from automatically restarting if an error of Windows to fail. You can choose that this option if Windows is stuck in a loop where Windows fails, attempts to restart, and fails again repeatedly.

  Reference:

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

   
  Step 2:

  Do System Restore to the point that your computer worked very well and install updates manually ensuring that do not install the problem causing the update unless it says 'important update '.

• I get the error code 80070020 when installing windows updates and also my computer crashes a lot. How to fix?

  I'm unable to install all the updates of windows - getting error code 80070020.  Have tried the suggested steps and they didn't work.
  Also can't get with my computer freeze.

  Did you just listed:

  You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates
  http://support.Microsoft.com/kb/883825

• Problem with speech recognition in Windows 7 and MS Word 2010 - strange window opens

  I have been using speech recognition in Windows 7 to dictate in Word 2010.  Yesterday it worked fine: I did a number of training records, added a few new words in the speech dictionary and dictated a part of a document.  No major problems.

  Today, however, when I begin to dictate, rather than insert the words directly in my Word document, a secondary window will appear next to the insertion point and text appears here, with small buttons that say "insert" and "Cancel".  It's rather annoying - get the text dictated in the document, I must stop dictating and say "insert."  Is it possible to prevent that from happening?  As far as I know, I don't have any changes to the settings or program options to cause this.  Help!

  Thanks for the answer, but now I can't seem to reproduce the problem.  I don't know why what started, but it doesn't seem to be the case more.  Thank you.

• How can keyboard and mouse issues - I solve them? Is this a problem with the computer or device?

  Hello

  Recently (within the last week), I ran into a problem where my computer thinks certain keys/buttons are down.

  They are:

  W

  A

  S

  D

  Q

  E

  Maj

  Space

  Control

  Right-click

  Left click

  These are my most commonly used keys/buttons, so it can become very annoying. In addition, most of the F keys get stuck, but it's because there is something that needs to be cleaned under the feet.

  My questions are: How can I fix? Is this a problem with my computer or my keyboard and mouse?

  He questions, here are my computer Incase care, as well as my keyboard and mouse:

  Inspiron 620, 8 GB RAM Dell, AMD Radeon HD 6450, everything the way it came to the left

  Mad Catz Cyborg S.T.R.I.K.E. 7 keyboard

  Mad Catz Cyborg R.A.T. 9 mouse

  Hello

  Welcome to the Dell Community Forum.

  This can happen due to wear normal use of the keyboard and the mouse, click on this link http://ow.ly/Ermrr which has some steps and download the FIxit. Restart the computer and let us know if this changes anything.

• I got a call from people claiming that there was a problem with the computer.

  Original title: scammed by PCWizards?

  A few days ago I received a call from PC assistants saying they were Windows operating system support. They tell me that they have noticed that I had many requests from spam junk that was slowing down my computer. Unfortunately, as I had a big problem with my computer in time, I bit. I was very nervous about it at the time, but since I had so many problems with my computer and that you didn't know what to do, I fell prey to their plot. They talked to me in a 6 month contract for a fee of $99.00. After they have finished the maintenance on my computer, it worked very well, too gullible me thought: maybe they are legitimate.

  At the end of the interview I googled their business and came across an article that has been exposed as the crooks and claims that Wizards PC installs a spyware sophisticated by giving them access to the victim's computer remotely.

  To reassure myself, I decided to call using my Norton Security System. Their technician checked my computer and found a few things that their technology did not that he should have done; such that no detected restore points, the registry was not cleaned (35 detected registry errors) and it did not remove some software malware browers (toolbars).

  On his recommendation, I recalled PC assistants. The first tech I talked didn't seem to know what he was doing, so I hung up with him and sent their support line and ask them to address these problems or I would withdraw the payment from my credit card. Almost immediately after sending the e-mail, another technician called me. Unknowingly, I had all ready filed a dispute with my credit card company. I intend to cancel the service, but I am still concerned by some spyware detected on my computer. What is the best way for me to handle this? How can I get authenic proof that I was definitely scammed and I should report it to the Internet Crime Center? Using my computer for a few basic daily functions, must not be so stressful!  Any constructive guidance would be greatly appreciated!

  (Scammed in PA)

  After they have finished the maintenance on my computer, it worked very well, too gullible me thought: maybe they are legitimate.

  At the end of the interview I googled their business and came across an article that has been exposed as the crooks and claims that Wizards PC installs a spyware sophisticated by giving them access to the victim's computer remotely.

  Hello

  It's a scam.

  Either these so-called "Microsoft" Tech companies want to sell you a worthless software, or remote access to your computer to try to steal your credit card and bank information and also achieve an identity theft on you.

  You gave them remote access and if you do Internet banking, contact your bank, explain, and change passwords.

  If you use your online credit card, cancel and get a new one issued to you.

  And the only way that willl you know that you are free to them is to backup your data and do a clean install of your operating system.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And Microsoft does not contact you unless YOU have made prior arrangements with them to do.

  There is an article in the link I'm you provide at the end of this one

  Read this Information from Microsoft:

  "Avoid scams to phone for tech support.

  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  Don't be fooled of unsolicited calls. Don't provide personal information.

  Here are some of the organizations that cyber criminals claim to come:

  • Helpdesk Windows

  • Windows repair center

  • Microsoft technical support

• Microsoft technical support

• Windows Support Group Technical Department

• Microsoft Research and Development Team (team of Microsoft R & D)

See you soon.

• problem with the computer graphic

  I have windows 7 ultimate and have updated my directx9 to directx11 but when I run nfs game mw13 it says directx10 or best graphic is necessary. my windows version is also compatible with the game so now what can I do?

  Please... Help.

  Hello

  Try to update your graphics driver. You can find the driver in your computer manufacturer's website. If you directx11 on it already, then it should be no problem with it. I suggest that you run the directx diagnostic tests.

  David