problems with the live chat

Similar Questions

• continue with the live chat

  ##contuine with live chat

  I'm back for the live chat to contune

  Hi Alan e Barekman.

  You will have to log into the chat, check out the link below
  https://support.Microsoft.com/contactus/chatcontact.aspx?scid=sw;en;1406

• Windows XP SP3 Professional Edition problems with the Live Essentials tried almost EVERYTHING please help...

  I am running Windows XP Professional Edition and have tried almost way possible from almost all of the codes, so that it can install. He always tells me a different code almost as something it must not 'dismantling' MSE. I am not certified has + by all means! But I do not know when you searched for sites Microsoft etc., you are looking for better & learn yourself. But I'm at the point where I say "I wanted I had saved the old Version of the WLE who worked great." Just to give you a clue, which hopefully will help me can govern this list I've done on:

  1. search and read questions from other people who were identical and followed step by step, when I received him seemed to be more common error Code. He said to download update Windows Cleanup Utility and remove everything said Microsoft Live in there. I did this and it just via a different error Code

  2 I tried to download directly the WLE "integer" and install it

  3 I am the admin. and always "Ran under" admin

  4 I watched the system requirements & everything I had was compatible, even if I n "t SQL, but went and downloaded and installed, it

  5 I ran in safe mode, and keep in mind that I do every time a cleaning in the place where there is no trace of even the new WLE Installer, b/c I read learned that you cannot leave this trace.

  6 and to be honest, I do all this work b/c I think WLE possesses one of the in my opinion, best photo library it y a. quick, simple, but still has all of the improvements that I use direct mail and really liked the MS Outlook 07 connector is what I have right now.

  7 I've never seen a free software that is so sensitive that it need to go through all these steps

  -Thoughts on any other reasons to help, I would take even the older edition if I could find it, but as soon as I eliminated and did a cleanup & reinstall my hard drive, it hit me. I forgot to record the show and then, think it is free I'll get it online but it has been updated and I need help which is much smarter than me, I will not STOP until I know what and why. BTW, it is not a problem with a firewall or anything b/c I disabled Norton and am MSE tent which was / is child's play, it's not dirty space, but it does the job and it's great and that's why I want the photo gallery for the least and Sync Mail to Outlook.  As I have said that I have nothing else, I know to do, I even tried on another computer running the exact same OPS than mine. And it's the same way. ??? Please help me to get someone...

  Thank you very much in advance for any help other than that described previously, or if someone from Microsoft could remotely help me if it is possible.

  -CM-

  Hmm. check that you can start the Windows Installer service and it is enabled.

  1. Click Start > run...
  2. Type cmd /K net start MSIServer
  3. Press enter and monitor messages in the window of the console open.

  If the service is started successfully, then download the offline version of the WLE from here and try to install it. Select all items to install because they are dependent on each other.
  Download the new log file, if it fails to install again.

• Serious problems with the 6.16 update: reboot page & chat

  First of all, I want to mention before, if there is no problem with Skype, it would make my computer all freeze where I by force to restart my system. If she didn't answer I could not force the program to close and would be forced to stop and start again.

  An hour or two there is something like it happened and so I restart my computer. Restart Skype updated during this time. When he came I went to my main group chat and it froze my computer, forcing me to do a hard cock down. For the next couple hours, it's the same thing. Even when I tried to disable my internet so I couldn't even open Skype. It is only now, 4 hours later that I am able to access Skype and the rest of the features on my computer, something I wasn't able to do.

  With this update, the display for the bubbles of text is not something I like. Timestamps are gone even if I still have the box checked to have these timestamps. I can't scroll to see previous messages and certain user setting have been forgotten or reset. I'm not happy about all of this change suddenly that I'm already rather on the fence with how much I love Skype.

  I'd like a way to return to the old interfaces without suffering a decline in quality with calls and video.

  The cat new UI is provided with the 6.16.64.105 version only. You can uninstall this 'special' version and install the 6.16.0.105 version with the old chat UI window.

  http://download.Skype.com/MSI/SkypeSetup_6.16.0.105.msi

• Problem open attachments in Windows Live Mail "there was a problem with the service Windows Live Hotmail (a matter of temporary network conectivity has nothing to do with your computer)".

  Hello

  In the last few weeks Im facing a problem when I try to open an attachment on my Windows Live Mail Im getting the following message: "there was a problem with the Windows Live Hotmail service (a matter of temporary network conectivity has nothing to do with your computer). Please try again. »

  Please let me know if I have a problem with my email account.

  Hello

  You will need to create a post on www.windowslivehelp.com for questions and assistance in connection with the Windows Live programs and services.

  In addition, take note of the error message that you are referencing, "...". "a network temporary conectivity issue has nothing to do with your computer.

• There was a problem with the Windows Live Hotmail service (a network connectivity problem temporary has nothing to do with your computer).

  There was a problem with the Hotmail service (a network connectivity problem temporary has nothing to do with your computer). Please try again

  . I really need to fix this! Help!
  original title: no answer not before!

  track every step!

  no change!

  I am getting really worried about it!

  Please ask in the forum Hotmail. We do not use it. We cannot answer your question.

  Windows Live Solution Center Hotmail Forum
  http://windowslivehelp.com/forums.aspx?ProductID=1

• Having a problem with Windows Live Mail lock up shortly after the start.

  Having a problem with Windows Live Mail lock up shortly after the start. When I start the Task Manager to end the process, it sometimes freezes and the only way to solve the problem is to disconnect which forces the profile to close. Assuming a corrupted profile, I followed the instructions of Windows support to fix a corrupted profile and copied all the files except ntuser.*. When I try to paste them into the new user profile (all profiles are admins), I get the error message asking if I want to leave to proceed. When I click on continue, all THE files in the profile block "corrupt" to the new one, including ntuser.*, that I was not choosing. Why? If the files are rewritten empty? Tried 3 times, same result. Please notify.

  I think I found it! I went in the Windows Live Forum and found a thread that looked like my problem. He suggested going to msconfig and take off Live Mail list start. I couldn't find it on the list, but the top element was "" default EXE"something of an unknown manufacturer. I took it out of the startup list, and Live Mail works again! Thanks for your help!

• Problems with the "Select tool?"

  Because I have updated the latest version of Adobe Illustrator on cc, the "Select" tool does not correctly. It does not scale the rectangle shapes (made by the tool 'Form') using the "select" tool (all other forms work fine). I tried to contact customer service at this topic and it seems that it is a software update. I asked an ETA, but was initially ignored, and the 2nd time said they could not provide me with this information yet, only that he had been sent to the engineering team. I have projects and patterns to talk of the possibility of those not being not on the time and all I was asking for a was an estimated time that the glitch would be fixed and then nothing more said, I booted from the live chat. At this point, I am furious because I tried to be patient ALL day with the customer service team and that's how I'm treated... All I want is a time on how long it usually takes to update glitches can be solved. Even if it takes a month, it would be nice to be able to provide this information to my people.

  Zewster,

  It seems that the problem is a bug that is limited to only one of the MAC versions starting from 10.7 and 10.8, but not 10.9 (Mavericks), see this thread linked below.

  https://forums.Adobe.com/thread/1595973

  Thus, a switch for the Mavericks with a reinstall might be another way to solve here and now.

• Anyone having problems with the new iPhone LTE connection 7 on Verizon?

  I am now on my iPhone second 7 with Verizon. I had four phones for me and my family. I have now had issues where I have no signal in the same areas where my signal allows to be strong. I can't solve the problem with the activation/deactivation of the airplane and then mode again in normal mode. My phone will rest with no signal for 5 minutes, then going to LTE with three bars. I also had the problem where I had only 1 x signal, while my son standing right next to me has LTE. And he had the same questions, where I'm on LTE and it gets no signal. I use to have LTE where I live and work all the time, now it's spotty at best. Apple has replaced me and my sons iPhones but not luck. Still do. Any ideas or an any other suffering?

  (1) go to settings/cell phone/cellular data Options/enable LTE and select ONLY the DATA. This seems to solve the problem (as a temporary solution) for most of the people affected by this problem. The bad part is your request might not be as clear (since they cannot use the highest LTE signals) and you can make calls and data at the same time. But it does not solve the issue.

  (2) there are rumors (but you didn't hear that from me that we only are not supposed to discuss beta software program Apple in this forum) that the new version of Apple Beta for iOS (which also includes an update of the software carrier Verizon to 26.0) seems to solve this problem. So, there's a light at the end of the tunnel.

• Qosmio G20 error message: problem with the cooling system has been detected

  I'm trying to fix a Qosmio G20 (which is about 3 years old, it is no longer in warranty).

  Error message: Warning: a problem with the cooling system has been detected.

  I managed to remove the outer case and observe the operation of the machine, and basically one of the fans does not at all. The fan which is closest to the power connector seems to work very well (he seems to be turning a lot, do not know if this is normal), but the other fan who does not seem to move at all.

  When I put in place the case and on the machine, I noticed after a few minutes the vent of the fan working heat sink had warm enough, while led the non-working fan remained cool.

  I cleaned the fan from dust and have also changed the BIOS battery mode mode high performance, but the problem still exists.

  I would be grateful if someone could give advice if the problem is the fan or something else.

  If the fan is the problem, where I can buy a: i live in the United Kingdom?

  Hello

  I think there might be something wrong with the cooling module and the replacement would be necessary.
  Usually, this should be done by an authorized provider (ASP) in your country.

  Technicians could replace it with a new part and also could renew the thermal grease which is placed between the module and the CPU cooling.

  So contact the ASP in your country and ask for later handling.

  By the way; also, you can buy the cooling of the ASP module!

  Good luck

• Satellite A40 - attention: problem with the cooling system has been detected.

  Hello guys,.

  From time to time, I get the following message is displayed:

  WARNING: a problem with the cooling system has been detected Toshiba
  Please turn off computer immediately and return it for service.

  I have Windows XP on it.
  I opened the cooling fan and clean it. Of course, I found it dirty rally.
  But still, I get this message!
  What should I do?
  I live in Northern Germany.

  Any advice is welcome and thanks in advance.

  Ibrahim

  Hello

  The message says it all!
  In this case you should contact the service provider authorized in your country!

  > I opened the cooling fan and clean it. Of course, I found it dirty rally.
  Eventually, the cooling modules don t like needs and that is why the message again!

  Nothing to my friend... you need help laptop technician

• OfficeJet Pro 6835: Problem with the print head - Oxc19a0003

  Just bought the Pro Officejet 6835 this month of April and now the print screen shows "Oxc19a0003, there is a problem with the printhead". Had tried a hard reset of the e power cord does unplugging and is still showin the same error. Can't find a number of HP support, I can call or chat online. Help, please!

  Hello

  Its unfortunate to see this error on a new pritner.

  The error appear while you were setting up the printer for the first time, before installing the ink? (Yes/no)

  The error appear while you have been putting in place of the printer for the first time, after installation of ink? (Yes/no)

  Can I know if you had printed a few pages before the error appeared? (Yes / no)

  The error appear as soon as you switched on the printer? (Yes / no)

  However, please call HP Technical Support for assistance.

• Problem with the numbers in the rows of cut and paste

  Hey,.

  I'm new to MAC and now have problems with the help of figures, I brought my windows Excel worksheets. On windows, I could cut a line and paste anywhere on this page and by practice that Excel would fill the void rank where I cut the content. but here on MAC it does not work, why?

  anyway I tried to live with it by cutting a line and for the collage, I used Insert > copied lines for paste swath and add a line for her. but last night I updated the numbers and now by the practice precedes the Windrow is stuck this time with a resized form, the line is resized to a big line.

  Why is this happening? If it can't be fixed, I can go back to a previous version of a number? This update of hate.

  Numbers is excellent NO then you should consider to guide your expectations.

  Cut number refers only to the content NOT the line, or cells.  Select when a row, and then use the cut command that you cut the contents of the cells.

  If you try to move a line from one place to another, you should try this method (which can work for you)...

  Select the line, then click and hold on the header line (up to the line "lift" on the table), the operation slide the line to the destination.

  

  Now drag the line:

  

  Now drop the line where you want to:

  

• Problem with the published parameters between the movement of FCPX

  Hello

  I have a little problem with the settings published between the movement at FCPX.

  For some reason, the published parameters have different values within FCPX in movement.

  For example, in motion, a parameter is - 187.04 and in FCPX is-0,19. What are the parameters of position for CSOS.

  If I try to change this setting in FCPX, the application crashes after 10 seconds or less.

  No idea what is causing the problem? I re-edited the effect several times, same result. The software that I use is FCPX 10.2.2 and 10.2 of the Motion.

  MOTION

  

  FINAL CUT X

  

  Thank you.

  The values that you have published on the move have been compared to this project that you created. The values shown in FCPX are "consistent" with any project that you create. Often, you will see the center screen is 0.5, 0.5. Left and below are 0, right and up are 1.0. Or you could see Center of 0.0 and a range between - 0.5 and 0.5. Sometimes, you will see the numbers on the scale of some sort of percentage (vertical values will be 0-100 [%] and the horizontal will be based on the aspect of the project, for example, horizontal will be between 0 and 177.7778 for a project of 1920 x 1080, etc..) It will depend on the type of object and the parameters associated with what you posted.

  If you want to "correct" values in FCPX, you will probably need to rig settings, otherwise, just live with it.

  For what is * why * your model crashes FCPX, that will be another reason and not the difference in the numbers. So, can we get more information on the model?

  To use specific fonts?

  You publish alterations settings?

  Anything out of the ordinary?

• HP officejet 7612: "There is a problem with the printer or ink system". That is the message, no error code.

  "Is there a problem with the printer or the ink system". The error message. Without error code. Original cartridges.

  HP has a center of service to Puerto Rico, where I live?

  Please tell me there is a solution for this problem.

  In the paper here troubleshooting steps can help resolve the printer ink system message justify Officejet 7612.