Problems with the MAC address duplicate when creating new jobs virtual

We use the MAC addresses of vWorkspace management. This means that we have the option set as an attachment with the basic MAC address pic01. This has worked well so far. We now extend our VDI environment with the new Virtual Machines in a new group. But now, we got the question if we create a new desktop computers, the broker for connections will distribute double MAC addresses (see the pic02 attachment). And as you know it will end in a messy DHCP and TCP/IP. Even if we put the basic MAC address to a new range, the broker for connections always distributes the old MAC address range. We restart the broker for connections rather than on the time and the problem is still the same!

Does anyone have ideas or solutions to this problem?

If you need additional information just let me know.


vWorkspace Broker for 7.6.305.845 connections

Client tools PN (former VM) or (new VM)

THX and greetings


Additional accessories:



Address management Mac is for groups of clouds. With groups of clouds, the machines get deleted/re-created very often so we need mac address management to allow the mac address be reused after a certain period of time.

With traditional groups, the machines are kept for long periods of time if you don't use mac addresses that you will get the number you have described management.

Thank you, Andrew.

Tags: Dell Tech

Similar Questions

  • I have problems with the form widget. When I created my forms, I need to leave out the line, one email because my client does not want the message line and two because those who have tried to fill the online form cannot submit because that box "email".

    I have problems with the form widget. When I created my forms, I need to leave out the line, one email because my client does not want the message line and two because those who have tried to fill the online form cannot submit because the 'email' box keep rejecting their email address valid. And I just tried to remove the line in my form and it does not allow me to delete or to mark it as not necessary either.

    Currently, there is no way around the field email forms of the Muse. Another option is to have a look at Jotforms or another third-party provider of shape that Muse has widgets for.

  • I have a problem with the calendar missing in when I brought my production files.

    I have a problem with the calendar missing in when I brought my production files.

    Hi, I brought my files on production server by dumping my production test folder. I brought my whole file it.

    This is a calendar of java script.

    In the test server, it works fine.

    The calendar written in java script is here. But when I managed to put in production the calendar disappeared.

    I'm still new to this, infact it's a fixed quick. I got the parts together.

    Advice on how I can get it from test to production the same way running server.

    I appreciate your help.
    Thank you

    Seems to get more acquainted with how ColdFusion is installed on your production system. You might find web root under a directory like/inetpub/wwwroot/and are usually directly above where you ColdFusion templates are located. Can't speculate as to what 'reader' it would be, as you didn't say if you're on UNIX, Windows, MAC or Linux, etc., not that this would help a lot. Who configured your server, or at least who is the administrator or webmaster? I would like to have a conversation with him or her.


  • anyone had problems with the Mac taken hostage by ransomeware?

    anyone had problems with the Mac taken hostage by ransomeware?

    Hey portogermano,

    I have not had problems yet, but I've heard that sort of ransomware is distributed through a program called Transmission.

    If you can, try to avoid this software!

    If you are installing applications from one other source other than the Mac App Store, make sure you can check the original source and always go to the site of real editors, so that you know that you are getting the real thing, not a bad software.

  • Problem with the Installation of JAVA in my new Dell running Windows 7

    Problem with the Installation of JAVA in my new Dell running Windows 7 - error message when you try to intall Java using Chrome.

    "lib'charsets.jar: old file not found."  However, a file of the same name was found.  No updates since the contents of the file do not match. »

    Then "Java update fails to apply the changes to your system."

    Then "error 1722.  There is a problem with this Windows Installer package.  A fun program as part of the Setup did not finish as expected.

    Earlier, I had a problem with the video and had Windows reinstalled 7.  Now my AOL games don't show/reading.  JAVA said error 1722 is an InstallShield error code. It indicates that the installation process has failed. The exact reason for this error is not known at this time.  I was told to uninstall JRE (Java Runtime Environment).  I find two versions of Java on my system (no JRE) - Java (TM) 6 - update 14 and 14 (64-bit).  Should I uninstall both?... OR WHAT?

    Hi Betty48228,

    Here's how to solve your problem:
    (1) uninstall all versions of Java.
    (2) the uninstall will probably fail. If so, get Revo Uninstaller free uninstall Java in advanced mode (integrated Java uninstaller runs, failure and then Revo will delete everthing manually). You will need to restart your PC.
    (3) reinstall Java:

  • ESX uses network adapter with the mac address that is different than virtual connect reports

    Hi all

    Our ESX environment consists of HP C7000 enclosure, virtual connect 1 gb ethernet with a mixture of BL480c and BL460c. We just bought some new BL460c G7 with NIC NC553i to replace some of the oldest BL480c. We have configured Virtual Connect to assign mac addresses. In vc management consoleI see the addresses assigned to the server, but when I start the server displays a different mac address for nic #2 that vc does. NIC #1 has the same mac address of console management vc and in the server BIOS. When I install ESX also sees the 'wrong' for #2 nic mac address. According to vmware nic #2 has not any network connected to what should be if it was really nic #2 (according to the vc management console).

    When I look at the mac addresses in the BIOS none of the network interface card have the mac address assigned by vc. VC firmware is 3.01. I have attached the photos I see information in the management of VC and BIOS console. Someone at - it for clues to what is happening and how can I solve it? Thanks in advance.

    Kind regards


    Please refer to:

    Note:   The ESX host uses following addresses starting with 00:50:56 (as opposed to the address embedded in the interface itself).

    To determine the MAC address of the interface Board of the ESX host, run the command:
    # ifconfig | grep-i hw
    The output looks like:
    vswif0 Link encap HWaddr 00:50:56:41:5 A: 59
    The MAC address is in the first line after HWaddr.  In this example, the MAC address is 00:50:56:41:5 has: 59.

    Note:   The ESX host uses following addresses starting with 00:50:56 (as opposed to the address embedded in the interface itself).

    You can also review the output information and the esxcfg-NICS - l order MAC addresses.
  • Together-NetworkAdapter fails with "the Mac address is incorrect...". »

    Pretty simple command:

    $TargetNetworkMacAddress = "00:50:56:a1:00:00".

    Get-NetworkAdapter - VM $TargetVMName | where {$_.} Name - eq $TargetNetworkAdapterName} | Together-NetworkAdapter - MacAddress $TargetNetworkMacAddress - confirm: $false

    Generates the error:

    All-NIC: 19/07/2012 16:27:54 Set-NetworkAdapter MAC address is not valid or is not in him valid range 00:50:56:00:00:00 - 00:50:56:3F:FF:FF.
    On line: 1 char: 39
    + $MyNetworkAdapter | Together-NetworkAdapter < < < <-MacAddress "00:50:56:a1:00:00."
    + CategoryInfo: InvalidArgument: (:)) [game-NetworkAdapter], InvalidArgument)
    + FullyQualifiedErrorId: Common_SharedParameterHelper_TryValidateStaticMacAddress_InvalidM
    acAddress, VMware.VimAutomation.ViCore.Cmdlets.Commands.VirtualDevice.SetNetworkAdapter

    PowerCLI Version
    VMware vSphere PowerCLI 5.0 build 435427
    Versions of the snap
    VMWare AutoDeploy PowerCLI 5.0 build 575
    VMWare ImageBuilder PowerCLI 5.0 build 575
    License of VMware PowerCLI 5.0 build 395016
    VMWare vSphere PowerCLI 5.0 build 435427

    Any ideas on why I get this error? The Mac address appears to be in the appropriate range.

    The specified MAC address 00:50:56:a1:00:00 is not in the range valid 00:50:56:00:00:00 - 00:50:56:3F:FF:FF. In the specified MAC address 'a' should be 0-3.

    Best regards, Robert

  • Problems with the opening of attachments when the user has restristed privilege to run executable code from Program Files and Windows folders.

    I'm trying to prevent users from running potentially dangerous files. According to the Windows policies so I put. Users can run any application Program Files, files (x 86), windows, and folder to all users of the program office. Users have no permission to write anything in this files. When the user double clicks for example document.doc on his desk - document opens fine with MS Word. But when the user tries to open this document in attachment directly (by selecting open with MS Word, instead of the economy) - he sees an error - "this action is limited by local politics. Ask your system administrator. "(not exact text).

     So I want, users able to open attachments from Thunderbird automatically, but not able to run any application or link, except Program Files, Program Files (x86), Windows and all users' desktop folder. How can I get this result?

    Thanks in advance.
    Calvo is serious.

    PS Sorry for my bad English. It is not my mother tongue.

    Thanks for responding.
    I discovered what was going on.
    This strange "bug" affects multiple computers with Windows 7 Ultimate in my case.
    When you create a SRP (software restriction policies) it creates two rules by default to run programs: windows folder and the Program Files folder. I manually add "C:\Program Files (x 86)" in places without restriction. BUT Windows and Program Files folder to default rules directly, but through registry keys. And this part seems difficult. You CAN run the executable files of Program Files. You CAN run the Program Files (x 86) executables. But if Thunderbird or Firefox try to run MS Word or excel or editor for.doc or *.odt opening or another file - downloaded files running programs blocked by SRP.
    In order to fix this, simply replace the rules for indirect paths like % HKLM/software/microsoft/windows... etc % with direct, for example "C:/Windows" and "C:/Program Files /". After that, everything works fine. Attachments and downloaded files automatically opens without a problem.

  • Problem with the ATTR_CALLBACK_DATA attribute. When received by routine changes.

    With the help of LabWindows/CVI 2013, PC (Windows XP)

    I'm passing a pointer to a memory block calloc generated so that when I call a reminder of the instrument of some parameters are available:

    ViStatus PLOT_JPlot (struct Level1DataBlock * L1DB_p) {}
    G_PanelInfo_p = CreatePanelInfoBlock (L1DB_p, PANEL_JPLOT); a rather complicated routine that use calloc to create and that initializes a bunch of data structures.


    iHandle = LoadPanelEx (0, JPlotPanel_UIR_file, JPLOT, __CVIUserHInst); load the UIR file panel

    status = SetPanelAttribute (iHandle, ATTR_CALLBACK_DATA, (void *) G_PanelInfo_p); load the pointer in the area of recall for this Panel data

    status = CallCtrlCallback (iHandle, JPLOT_CURSORBUTTON, EVENT_COMMIT, 0, 0, 0);



    that translates into a call to

    int CVICALLBACK CB_JPlotCursorToggle (int command face, int, int event, void * callbackData, int eventData1, int eventData2) {}

    struct PanelInfoConst * G_PanelInfo_p = NULL;
    switch (event) {}
    case EVENT_COMMIT:

    GetPanelAttribute (Panel, ATTR_CALLBACK_DATA, & panelcallbackData_p);
    G_PanelInfo_p = (struct PanelInfoConst *) panelcallbackData_p;              pointer wrong here.




    G_PanelInfo_p ends up being a pointer to somewhere in hyperspace and I get an error of memory - it's pointing to somewhere outside the memory space of the whole process.

    Except that this same bit works perfectly for another window. The only difference is that the other window is actually displayed on the screen before I call it "CallCtrlCallback ()" and with this window it has not actually displayed again.

    The block of memory is freed when the window is closed.

    Bearing in mind that other post:

    should I use the chained callback function?

    Oh, and while I am, which is supposed to appear in the "" Sub * callbackData "parameter of the callback function?" He eventually NULL; I think the entry ATTR_CALLBACK_DATA would he appear.

    You are probably using in this issue.

    When it comes to custom controls, you can not set or get the data from callback using ATTR_CALLBACK_DATA. Is that more personalized because, the controls use the mechanism of chaining of reminder of the programming interface Toolbox, and once the recalls are chained, you must continue to use the chaining API callback to get and set the recall data.

    This help topic describes what you should do instead.


  • I have problems with the cursor jumping around when I type, especially on facebook.

    When I type, the cursor jumps around. Most of the time he'll be back in the part I typed before. And for some reason, he does it almost everytime I type in the word you. I have run virus scans and she always does. Any suggestions?

    By chance, your computer is a laptop or netbook?
    I found that when typing, my wrist is sometimes contact with the touchpad causing the cursor to jump on.  Something specific on how you type 'you' might make your wrist touch the touchpad.  If this is your case, there is a program called 'touchfreeze' which disables the touchpad while you type.

    TouchFreeze: <> >
    Article: <>, 83501/description.html >


  • Problem with the dialog box displayed when the RadioButton is selected.

    It is an application with 3 buttons button1, radio 2 and output key that uses System.exit (0)
    The problem is with the dialogs first two buttons

    1. I open the application

    2 Select a radiobutton, I get a dialog box, I click 'ok', dialog will, that's fine.

    3. I choose an another radiobutton button1 or button2, I get the corresponding dialog, BUT know I have to click 'ok' twice to keep it alive.

    I don't know what could be the problem, here is the code:

    package com.thinkingblackberry;
    import net.rim.device.api.system.Display;
    import net.rim.device.api.ui.Color;
    import net.rim.device.api.ui.DrawStyle;
    import net.rim.device.api.ui.Field;
    import net.rim.device.api.ui.FieldChangeListener;
    import net.rim.device.api.ui.Graphics;
    import net.rim.device.api.ui.component.ButtonField;
    import net.rim.device.api.ui.component.Dialog;
    import net.rim.device.api.ui.component.LabelField;
    import net.rim.device.api.ui.component.PasswordEditField;
    import net.rim.device.api.ui.component.RadioButtonField;
    import net.rim.device.api.ui.component.RadioButtonGroup;
    import net.rim.device.api.ui.component.RichTextField;
    import net.rim.device.api.ui.component.Status;
    import net.rim.device.api.ui.container.MainScreen;
    import net.rim.device.api.ui.container.VerticalFieldManager;
    import net.rim.device.api.ui.component.PasswordEditField;
    public class HelloWorldScreen1 extends MainScreen implements FieldChangeListener, DrawStyle {
        protected static final int RED = 0;
        MButtons fullscreen;
        //protected RadioButtonGroup rbGroup= new RadioButtonGroup();
        public HelloWorldScreen1() {
            final RadioButtonGroup rbGroup=new RadioButtonGroup();
            RadioButtonField rbField= new RadioButtonField("RadioB1"){
                protected void paint(Graphics g){
            RadioButtonField rbField2= new RadioButtonField("RadioB2"){
                protected void paint(Graphics g){
            RadioButtonField rbExit=new RadioButtonField("Exit"){
                protected void paint(Graphics g){
            rbGroup.setChangeListener(new FieldChangeListener() {
                public void fieldChanged(Field field, int context) {
                if (rbGroup.getSelectedIndex() == 0) {
                    Dialog.inform( ""+rbGroup.getSelectedIndex());
                else if (rbGroup.getSelectedIndex() == 1) {
                    Dialog.inform( ""+rbGroup.getSelectedIndex());
                else if(rbGroup.getSelectedIndex()==2){
        public HelloWorldScreen1(long arg0) {
        public void fieldChanged(Field field, int context) {

    I guess the event changed field is called twice, once deselection button1 and once to select button2. you pay your processing logic to account for this.

  • Error "invalid address style" when create new address R12 of legal entity


    Did someone there had the same problem as I do.
    I am creating a new Dutch address for a new legal entity in Oracle R12.1.1 Vision, but however hard I try, I still received the error message "Invalid address Style" and I filled out all the required field.
    When I tested it with the country, "WE" or "Australia" is could create a new address without any problem.

    I hope you can help me solve my problem.

    Thanks in advance...!


    I speak from memory, but addresses are maintained as DFF. To verify if the FDF is compiled.

  • How the auto insert value when creating new data?

    I'm new to APEX and was trying to solve this problem:
    To put it simply: I have a table, square_table, that contains two fields: input_number and square_value.
    All I want to do is when a user enters an input_number of 'the model of form and report', the squared value is automatically calculated and recorded with the new number to the square_table.
    Someone post a solution (as the possible detail, pls :)? I've seen many tutorials and no luck.

    Thank you very much

    Design flaws. You should not do this, even for strictly educational purposes. Stick to 3NF as much as possible and only denormalize if a) you REALLY REALLY REALLY need to do, AND b) your denormalized design survives review by peers, AND c) VERY WELL, document you the reasoning behind such a design. Please read this - look for the 'calculated values.

    Anyway. You can do this at least two ways:

    (1) create a Page process in your APEX application. Not a good idea, as other sources of INSERTs (sqplus, client/server applications) will make the calculation unless it is coded to do, and this would create several points of maintenance, documentation and tests, not to speak of the extra complexity to deal with several potential development environments; or
    (2) create a trigger of good old plain.

    If it was not a misconception, I'd go for (2). It's the basic SQL homework, well documented and easy to implement.
    Kind regards


    user11288935 wrote:
    I'm new to APEX and was trying to solve this problem:
    To put it simply: I have a table, square_table, that contains two fields: input_number and square_value.
    All I want to do is when a user enters an input_number of 'the model of form and report', the squared value is automatically calculated and recorded with the new number to the square_table.
    Someone post a solution (as the possible detail, pls :)? I've seen many tutorials and no luck.

    Thank you very much

  • IMac, how to stop the white icon files when creating new folders?

    Whenever I create a new folder, the folder contains these white icon files that end up getting deleted. Is there a way to prevent this?

    Thank you

    If you create a new folder with the Finder, there is no hierarchy, you get a single empty, empty folder icon, if you create a new folder in the Terminal with the following syntax blue, there is hierarchy.

    # Do the new folder has with B folder it contains. And C in B and D in C files.

    $ mkdir Pei A, B, C, D

    # Just make folder a.

    $ mkdir A

    Are you using a utility Finder replacement, or creating folders from an application or a script?

  • Problem with the transfer of applications to a new iphone

    My old 5s, new iPhone is 6 s. I got old and the other from backup restore. More than half of the applications do not appear on the new phone, nor do they appear in "not on this iPhone" appearing in the App Store. When I search a certain app I bought with my old phone, I suggested to BUY this new, even though I am connected with the same Apple ID. Is it possible to fix it?

    You can re - download previously purchased items in you log in to the App Store with the Apple ID used to make the purchase, then accessing the purchases tab.

    Due to the technology called App thinning, apps that have been uploaded to iPhone 5s are different from those needed for the iPhone 6 s, so they need to be downloaded again. This should be given automatically, unless you interrupted the process in some way, or does not give it enough time.

Maybe you are looking for

  • Skype disappeared after an accident and I can't reinstall it.

    I use Windows 7 Professional, Service Pack 1. Earlier today, the computer crashed because of an error with the video card driver. Upon restart, Skype has been uninstalled. His file was still there, but all it contained was the toolbar click-to-talk.

  • Connector for cable PXI-2568?

    I'm creating a test set-up and we probably intend to use the PXI-2568 (and the mating cable) to connect, but want the cable directly into my test setup. I think that there are a few standards D - 62, and I do not have the PXI-2568 module still to tes

  • Scanning problems on wireless HP Officejet 4500 G510n-z

    I'm about to throw this printer/scanner at the door!  I love this scanner but since I had to buy a new computer with windows 8, no driver disc to install my software disc, I can't seem to get a complete reinstallation of HP programs to install the Ce

  • replace victory 8.1 with win 7

    Just got an Envy700xt which came with win 8.1 (my bad!)). is it possible to replace it with win 7?

  • Help-exporter

    So I have a problem to the premier CC pro, because I can't export.  Under file, then press the export button is gray and I can't click on it.  So I looked for an answer everyone says click on the Panel or the share menu, but they do not tell where he