Problems with the old original iPad

Similar Questions

• Problems with the Smart keyboard (iPad 9.7 Pro)

  I recently bought the iPad Pro 9.7 inches, gray space, Wifi, 128 GB. IOS 9.3.1 of the operating system.

  A few questions that I met in my four days of using the iPad with the Smart keyboard:

  NOTE: the following problems persist despite a technical support call which lasted, I did 2 hours and 30 minutes. I had to restore my iPad settings by connecting to iTunes via my PC to reinstall the last iOS.

  (i) switching applications: if I want to pass, say, from safari to adobe, it is quite easy to do with the keyboard. However, there is an intermittent problem when the apps. When I try to open Adobe when I use safari, the screen of the iPad shows apps that are open as soon as I press the command and tab key.

  What is supposed to happen - I choose to open Adobe, Adobe opens.

  What happens to the contrary - Adobe does not open. Another "X" application that is currently running, opens. It is quite frustrating, because there is no pattern to this. If I use once more the keyboard shortcut to open Adobe, another application 'Y' which is running, open it now.

  In this case, I pointed out, often when the App Store is running.

  (II) command key: sometimes, shortly after I use the shortcut keys to turn on screen shortcut area (pop-up shortcut) - apps, this is supposed to happen if and only if you press and hold down the command key.

  This often happens when I switch to Safari.

  (III) keyboard not responding: a problem that I met today for the first time. My keyboard will not just respond. I had to disconnect and reconnect the keyboard for this function.

  (IV) on which the space key: to wake up the iPad, pressing the SPACEBAR is enough. You don't have to press the home button. Yet, sometimes the space key does not respond and you must use the home button.

  v) Quick app - keyboard shortcut crash switch function causes: if I want to switch from app to app 'X' 'Y', but mistakenly switch to 'Z' app, I immediately want to spend to 'Y '. However, I can't do this in quick succession. I have to wait a second or two before I can switch from 'Y' 'Z' app, otherwise the automatic switching app crashes and you have to wait once more for a second or two before moving on.

  My diagnosis:

  (I) it could be a problem with the smart connector on my iPad. A hardware problem. But it does not explain why the automatic switching app appears and passes correctly but eventually open the wrong applications. Also, it does not explain why the problem is intermittent.

  (II) a software problem. However, that would make me a face 5 questions at once. Sort of. I was surprised that, apart from the question of #3 and #4, there was almost no mention of other issues.

  To restart the iPad or to disconnect and reconnect the keyboard. But I don't think that anyone would be willing to do this 4 - 5 times on a daily basis.

  Update:

  So I used my keyboard all day yesterday without opening the App Store. And guess what? It has been working perfectly. All the above problems I mentioned were not available yesterday. I'll use the App Store today and let it run in the background to see how does my iPad.

• Problem with the screen on IPAD curtain

  Hello

  I'm a bad psychic, and I have a problem with the screen curtain.

  A longitudinal of Voice Over, the screen curtain is automatically activate.

  Normally to turn it off, you must type three times with three fingers. Only on my IPAD when I type three times with three fingers is "saying that turns off or preach. Find it me impossible to disable the screen curtain when voiceover is active.

  The latest version of IOS 9.2.1 is installed.

  I reset the Ipad and nothing changes.

  Can someone help me?

  Thank you

  Is is possible that the zoom is also on your iPad? If this is the case, try to use a quadruple 3 finger tap to turn off screen curtain.

  If the zoom is not active, try:

  1. Possessing the sleep/wake and home button until the Apple logo appears or 15-20 seconds.
  2. If, you can't remove the curtain of the screen, I would advise you reset the settings of the iPad. Settings > general > reset > reset all settings. It will be his turn VoiceOver off, but then you can use iTunes to turn on VoiceOver. Voice-over should return without the curtain of the screen automatically active. IOS - Apple Support using accessibility features

  The of is it possible that zoom is also active your iPad? In this case, you must use a valve 3 quadruple finger pour disable the screen curtain.

  try if the zoom is not enabled:
  1. While holding the button market / sleep and home to ' to the Apple logo, or 15-20 seconds.
  2. If you still can't delete the screen curtain, I recommend to RESET the settings on the iPad. Settings > General > RESET > RESET all settings. This turns off VoiceOver, but you can then use iTunes to turn on VoiceOver. Back to turn voiceOver should without the curtain automatically active screen. Use IOS - Apple support accessibility features

  -AJ

• One of the problems with the pirates on iPad here?

  I'm having a problem with what is called brandonvon.com on my iPad. She raised my google search engine hostage and locked me up. Any suggestions on how to get rid of it.

  They are not pirates, it is more likely adware.

  Go to settings - Safari - clear the history and data from the Web site.

  If that doesn't work, reset your device. This will not erase your data stored on the phone.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  https://support.Apple.com/en-us/HT201559

• Problems with the old game; Total Annihlation. Display a horizontal bars, turns into a rainbow of colors. Help, please. I love this game.

  I have display problems with a game that I just downloaded. The game is Annihlation Total; the game does not appear correctly. He works for a few seconds, all the graphics turn Rainbow and I can't seem to stop. Tried to run in compatibility mode; did not work. I hope there is a solution because this is one of my favorite games...

  Hi razorbladeapple,
  
  (a) what operating system do you have? And also to indicate the version?
   
  There is currently no information on the compatibility of the game with Windows 7.
  You can also try to check compatibility here: http://www.microsoft.com/windows/compatibility/windows-7/en-us/Default.aspx
   
  (b) is the display horizontal bar change only whem you play the game?
   
  (c) you have installed the updated display drivers?
   
  Some devices have drivers you need to install yourself. If you download a driver that is not self-installable, follow these steps:
   
  You must be logged on as administrator to perform these steps.
   
  For more information, see: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly
   
  Update drivers: recommended links
  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links
   
  Contact GT Interactive and check what they have to say about the compatibility of the game with Windows 7 because they are the best people to offer support.
  
  Aziz Nadeem - Microsoft Support

• Problems with the old version of Acrobat?

  I don't know if this is the right place to post this, so feel free to another place direct me.

  I created an Access application that uses a database as a source to create emails with attached custom PDF Forms. Everything works fine on my PC but when I tried to apply it on the target machine, everything turned to custard. When I try to run I get the message "no Acrobat serial number valid. found Acrobat stops now. »

  I see that I have all the correct references. The only difference between the two environments is home, I have Acrobat 9 and the target has Acrobat 7. I looked on the web, but none of the sites I've found seems to fit my situation.

  I guess Acrobat 7 is too old, but go to the DC Acrobat subscription is not really an option.

  Can anyone offer suggestions/ideas?

  Thanks for the replies. I've got it sorted. After watching a little more closely and did a little more research, I discovered that the issue has been entirely with Acrobat 7. This situation seems to occur when you install a later version of Acrobat (same drive). It's more complex than that, but it's essential. He never appeared in the normal course of events because these days, they (the club I belong to and made the application for) use Reader to read the files PDF and CutePDF to print to PDF. All this turned to custard when I tried to call the API of Acrobat. I had to uninstall Acrobat 7 and try to reinstall it from the original CS2 diskettes. Because it is so old the activation server no longer. However Adobe gives links to versions that can be installed without activation until you have a valid serial number. Good I thought. Downloaded and installed, but he would not accept the serial number of the CS2 DVD. Oh! I managed to find a serial number online which has been accepted, so now it all workers.
  What a carry-on! Fairly typical of how Adobe works these days, unfortunately.

• Problems with the old ID on FROM Adobe.

  I have an old that permission that I can't remove, because the E-mail address is more wonderful and the password appears to be wrong. This all happened after migration FROM Adobe from an older Mac to a new.

  I have the same problem and have tried to use the help of adobe without great success.  I don/t think anyone the answers to questions on this forum?

• Reclassification of CS3 to CS5.  Problems with the old file.

  I design a monthly publication, which is always started from an InDesign template.  This template has been created in CS3 and Incopy all links have been created using CS3 as well.

  We have upgraded to CS5 today and now we are unable to connect to these stories.  Here is the error message:

  "This story must be converted to the format"InCopy Document"in order to change it."

  Should I dissociate and create a new InCopy Documents or is there a quick way to solve this problem?

  Thank you!

  I don't know, I think it's pretty fast.

  Open the file in CS3.

  Select all the stories in the Panel assignments (shift-click to get them all). -10 seconds

  Click the icon to break the (trash) link at the bottom of the Panel. -1 second

  Close the file in CS3, do a save as w/a different name if you wish. -5 seconds

  Open the CS3 to CS5. Save or save as. -20-30 seconds (depending on the size)

  (Personally, at this stage, even if I was not using InCopy, I would still be exporting to IDML and then reopen it in ID CS5, by saving the document without title with another name, since you are skipping a few versions.) But it is not necessary. If you do, add another minute).

  Choose Edition > InCopy > export all stories, 10-20 seconds, depending on how much it must export.

  The end. It is 2 minutes, Yes?

  AM

• I have a problem with the new version of Photoshop CC 2015

  Hello

  I just installed the new version of Photoshop CC 2015. However I have proplem with this version. If I optimize the program, I will not be able to use all the tools, because everything is great, I don't have the problem with the old version.

  I hope for a solution...

  Go to Preferences > Interface > user interface scaling and see if 200% is checked.

  If so, uncheck the box and see if that fixes the problem.

• Problem with the iPad using kindle app.

  WE have 2 iPads, iPad 3 and the air of aniPad. Nor are working using the kindle App freezes and looks like he's trying to download or open a book. Which of the two in the lower part shows also cloud and who is on the side of the unit?

  Amazon made the kindle app, not Apple.

  If you have problems with the app-contact Amazon Kindle.

  http://www.Amazon.com/GP/help/customer/display.html?nodeID=200298460

• I just wanted to know at all, if you encounter a problem with the update of creative cloud as if I was (error 1001), I discovered that my Webroot AntiVirus has been the origin of the problem. I turned it off and it updated correctly. Hope that helps some

  I just wanted to know at all, if you encounter a problem with the update of creative cloud as if I was (error 1001), I discovered that my Webroot AntiVirus has been the origin of the problem. I turned it off and it updated correctly. Hope that helps some people I've seen so angry about it here by searching for the answer myself.

  Thanks for sharing this, yes turning Firewall works.

  Concerning

  Stéphane

• I noticed a problem with the way he is perceived the DPS on iPad

  Hello everyone, I noticed a problem with the way he is perceived the DPS on iPad. I know for sure it can be resolved, but I do not see the solution. Maybe some of you will give me a hand.

  I used during a presentation of DPS more html5/javascript animation, and I noticed that the animations are already loaded when I reach these pages, but if I chose the thumbnail summary page it loads immediately.

  I would like to than the animations to be loading when a user enters a page by dragging it.

  Thank you in advance. I wish you all the best.

  Yes, that was the problem, thank you very much, I can now show my client presentation.

• SEVERAL problems with the new X 34

  So, I have been active during the overclock.net forums concerning the many problems I am having with my X 34.

  Long story short, I'm back this thing to Newegg and waiting for another delivery. But I thought I'd come at least here because it has high liklihood to return to anyone who cares to Acer. I called their tech support to let them know about the issues, but when the old Indian robot for 2 years at the other end kept referring to as resolution of refresh rate, I decided that I couldn't take more.

  So I took delivery of the monitor yesterday and he initially worked well... but the longer he stayed, the more problems, he has developed.

  My system is one I built a year or two ago and works perfectly with my Dell 3008WFP. Video card is a brand new MSI 980 Ti Lightning. Operating system is Windows 10 x 64. Is a Corsair 750W POWER supply. 16 GB of DDR3 RAM.

  I even made a COMPLETELY new install of Windows 10 on this computer to try to resolve these problems. Did not work. I have disconnected/reconnected everything inside my computer, including RAM and GPU. Did not work.

  And Yes, G-sync is enabled in the NVCP. And Yes, I manually set the refresh rate in the NVCP in correlation with the manual settings on the monitor.

  Problem no. 1: Menu recording does not settings

  -Don't know what the problem is here. But for about 3 hours last night, my monitor would not save settings for serger refresh rate. I would go on the menu... allow the serger... Set it to 100 Hz... Select "Apply and restart. Then (here's the interesting thing I think in hindsight), the screen would flash many colors several times and restart. I assumed that flashing color was normal... but it was never the Predator Logo when it has been reset. The office is finally pointing upwards and I could choose 100 Hz in my NVCP... but when you returned from the settings menu, Overclock was Off back with the default refresh rate. I have nothing would fix it with the reset of the monitor and unplug. Later... I have unplugeed the monitor for 30 minutes and when I plugged it back in, it would save my overclock settings now. It is interesting, but now, when I selected "Apply and reset", he would show the Predator logo when restarting... this logo did not appear before.

  Problem #2: Flashing screen

  -See a video of this question HERE

  -This developed before my eyes. After the initial installation of the monitor, it worked fine. Without no flicker, no problems. But as I was sitting at the dinner table last night, I started to see the monitor flashing intermittently in the other room. I look at the screen, he flickered about 4 or 5 times per minute. For the next hour, he progressed to 30 - 40 times per minute. And subsequently developed in constant blinking. BUT this flicker only happens when I go to the Office at 100 Hz. It happens sometimes in games, but not constant.

  I first thought that I had a bad cable of DP since I used one from Amazon, if I swapped it for the Acer cable included. Nope... same problem. I even inserted my previous EVGA 780 TI... but the flicker that happens too.

  Then, I thought it was a driver problem, I did a clean install of the nVdiia previous drivers. Nope. Then a cleaning installed latest drivers from nVidia WHQL. Nope.

  Then I saw here that you can download the drivers for the monitor directly from Acer. So, I did a guy like an unsigned driver installation. Nope.

  After all this, the problem persists.

  Strange thing about this one is that there was when I first got the monitor but got progressively worse since I got it.

  Another weird thing is that if I have a window open, then it isn't twinkle... reduce the window, and he comes back. It's actually what made me think, it was a driver issue, but as you can see above, I think that I have ruled that that fully.

  Also, if I set my refresh rate to 95Hz or below, the problem occurs. (This is actually how I currently work).

  -UPDATE: the issue has actually started just after executing i1Profiler to calibrate the screen several times back to back. I can't imagine how, but could the rapid exchange of multiple colors full screen damaged electronics somehow? Or is it just a weird coincidence?

  -UPDATED #2: it was suggested that ADC can cause the problem as it caused problems with the previous Acer monitors. So I completely deleted i1Profiler and reset my default .icc profile. I also think that I figured out how to do a monitor factory reset - if you hold the buttons first and fifth, restarting the screen and all the default settings. in any case, does too and the blinking persists...

  #3 problem: Backlight horrible bleeding

  I have to type anything here? Leave some pictures to speak for themselves...

  

  

  Trouble #4: Parts of the screen does not not on

  It has been described elsewhere, so I won't detail it here. But yes, I have the same problem. Here is a representative of my monitor picture when the issue arose.

  

  Overall, I am extremely disappointed, although I can't say I'm surprised. I mean, we deal with Acer here guys... Not exactly known for the high-end products. You can put the red lipstick on a pig...

  So is there more any idea or suggestion out there?

  Until then... I'll wait for my new X 34 excerpt here from Newegg to see if I won the lottery of Acer he...

  I created this post to be a "accepted solution" to this thread with the purpose to help other users who need to find the answers. This should help to find this information faster than to have to go almost 800 posts to find pieces of information.

  Wake up from sleep (backlight) - initial response and follow-up

  Problems with Overclocking at 100 hz - original response

  Coil - Whine Original response

  Color banding - users in Australia reported the problem. The teams in the region to THE have been notified and a firmware is available.

  -Scanning lines Original response

  Thank you
  Cory

• Problem with the Package Windows Installer... when trying to install ITUNES 9.2 and Quicktime.

  I bought an IPHONE 4 yesterday.  For more than 7 hours, I tried everything to download ITUNES 9.2.  I get the same error.  I spoke with apple as Microsoft.  I didn't PAY to get assistance from Microsoft yet and I hope I don't have to.

  Error: problem with the Windows Installer Package.  A program required for this install to complete could not be run.  Contact your provider to support personal or package.

  I have Windows XP.  I uninstalled and re-installed Safari and which did not help (at one point, I had problems with Safari).  I also have at one point received an alert on 'applesync.notifier' could not be executed.

  I have no idea where from here, but I'm frustrated.  I want to use my phone for something more than "just a phone" and I can't.  I have to carry my OLD Iphone (1st generation original).  Help<><>

  There is a simple way to do it!

  I had this problem too, but I did

  first open Installer u then let it install

  When you get the messege, click ok and it will say restoration of action but don't get put off by this cause after 5 min, it will say: it is installed and restart your computer

  hope this has helped

• What to do with the old user profile after you have created a new user profile

  original title: new user profile

  I was told my user profile is corrupted and create a new one, if I do this is it recommended to give up and delete the old? Or simply use the new profile for the intended use of the new?

  Hello

  They are similar, if not the same, as your question then use these methods to correct problems
  with the account or migrate to another (explained in the last link however you please, don't skip the)
  other measures to start).

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.