problems with the project of example LabVIEW FPGA

I'm trying to adapt the example project record on CompactRIO and LabVIEW FPGA Waveform Acquisition for my hardware, but can't seem to do things. I'm just following the instructions in the tutorial, but can not make sense out of section adapt this example to your hardware project, in particular, the instruction to "Drag FPGA Main.vi in the Project Explorer in the Open FPGA VI service window reference VI." Can someone explain on what is supposed to happen here? BTW, the target hardware that I'm doing this work on is a cRIO-9068 with some C series i/o modules.

Finally, I came across the answer. For anyone else who may encounter this problem, the attached screenshot is worth a thousand words.

Tags: NI Software

Similar Questions

  • Different sampling rate with the same connector AIO, Labview FPGA

    Hello

    I use LV 2009 with the new Toolbox FPGA and an NI PXI 7854R. I acquire an analog signal with a sampling frequency of 600kS / s. I need as the sampling rate for the processing of the data, but I also need the signal sampled with a much smaller, variable sampling frequency to a FFT.

    I've attached a picture to clarify, in a simple example, I'm looking for.

    I tried with the structure case only take each ' iht iteration, but did not get the expected results.

    Does anyone have another idea how to solve my problem? Of the, "Resampling" express VI in the funtion FPGA palette does not help me.

    Thanks in advance,

    Concerning

    Hello

    the connector for the analog input is a "shared resource", so you should he alone in your FPGA Code.

    Find attached an example that shows how to perform this task of analysis.

    Concerning

    Ulrich

    AE OR-CER

  • Problem with the projects of encoder and the reopening of the media

    Hello everyone, I am a beginner and I'm having a very strange problem.

    I did my first project first and everything seems ok in preview. Then I tried it exported to avi using media encoder. It is a film color 1024 x 682, 25 fps, lasting about a minute. Export AVI definition was compression xvid, and after a long wait (10 min) and anything started, I tried with divx. After a while more, media encode blocked and I need to put it down with the windows Task Manager. Then I normally closed first.

    After the reopening of first, I chose the project saved, but it do not open and a message appears (in my language, so I'll try to translate): "cannot open a sequence of the project. It was not possible to associate any file preview of sequence or codec for this kind of sequence. »

    Also, I tried create other projects but none of them can be opened!

    More information: Premiere pro CS4, Win XP 32-bit sp3, PC AMD64 3200 +, 3 GB of ram.

    Project from the inside: a couple of uncompressed avi video and a few still images to jpg. And some transitions and text. Background music. Very simple.

    I hope you can let me know how to get back to my project and also export to avi. Help! Thank you!

    Addition:

    PS: perhaps the mistake of codec I attach can be the cause? How to solve it?

    Unfortunately, both Sherlock and G-Spot do not see the CODEC MainConcept Adobe correctly. Adobe uses a naming convention, they do not understand, but it's designed to "hide" these CODEC, so that other programs do not overwrite them.

    Now, there has been cases has been reported, where a full of PrPro paid version "returned" to the trial version. The trial version cannot do anything regarding the MPEG.

    In these cases (do not know the causes), the difficulty was to uninstall CS4, run the Adobe CS4 Clean Script for several times, rebooting between each term, then reinstall CS4, then update. It worked in all cases, as I remember.

    What caused the full back paid versions is a mystery to me, and I have yet to hear about the cause.

    Sounds like your paid full CS4 now thinks it's trial version. The steps above should fix it for you.

    Good luck

    Hunt

  • Problems with the new version of LabVIEW font size...

    LabVIEW 2013, version 13.0 (64-bit), 15pt police Application.

    There it is again.  Load a new version of LabVIEW and either forget to change fonts by default or default in this case, font change does not block spread chart by default in (Tools > Options > environment > fonts).  Yes, you can use the (Drop Down Menu fonts > police dialog box > set and select the default Panel) and it will take.

    But now you have loaded your old code made too many changes to recharge under your chosen font settings, and the new 15pt font replaced many of your old 14pt font to the point that your code function entries that have been sized to 14pt are now misalligned / overlapping and it takes a long time to fix.

    Does anyone know how to reallocate the global level different fonts in your code without having to reset them manually one at a time?

    Thank you

    HLB

    Yet another reason to copy your labview.ini file and place it with every new installation...

  • LabVIEW 2010 FPGA: problem with the mean and the variance Subvi

    The Subvi 'Average, Variance and standard deviation' seems to not work properly. The calculation of the average value is ok but std and variance are bad and the results change with representation in an unexpected way. Everyone knows about this problem? Is there a problem with the use of this function?

    Thank you

    Andrea

    Hello Andrea,

    Here is a test for the configuration of your VI (entered I16, 16 samples), saved in LabVIEW 2010 SP1 and the new Subvi. It is relatively simple to adapt it to other configurations, but it does not reconfigure several nodes and constants on the diagram. Let me know if it will work for you.

    Kind regards

    Jim

  • Problems with the resource of labview execution 2 visa

    I use two loops in a labview code all-in - connects to a motor controller and other is used to connect to a multimeter agilent. As soon as I run this VI, the loop to connect to the controller stop working and only used to configure agilent machine works. If I remove the second loop (connecting to the computer of agilent), the code works fine. I guess it's a problem with the execution priority. Could you please review the attached code and let me know any problems with it.

    COM1 and Com3 share an interruption.

    Go to the BIOS of the computer and set the port to Com3 to the Com2 port, then they will be on their own interrupt and see if that helps.

    FYI

    COM1 and Com3 share IRQ3

    COM2 and Com4 share IRQ4

  • I have a problem with the simulation in Matlab 6.5 and LabVIEW for PID controllers

    I have a problem with the simulation in Matlab 6.5 and LabVIEW. I have a few methods for granting regulators PID in MATLAB to go but not of LabVIEW. Degree of international teams of two transfer but when I passed to the fourth degree is no longer working. We have changed the formula to calculate the parameters for the fourth year and gave me some good values for assignment of Matlab, but when I put on LabVIEW are not resolved. the formulas are available in PDF format and are. Please help me and me someone if possible. Thank you
    Lim.4 generation in comparison methods and the MATLAB program settings are for the service of transfer to the second degree.

    Hello Lascarica,

    I noticed that you are using the screw of PID. Gains on these screws are based on TIME instead of GAIN. You should be able to build a PID regulator and vary the gains and then compare the results.

  • I had many problems with the first cc 2014 so I reinstalled it and now it says that I can not open my project because it was recorded on a newer version. Is there something I can do?

    I had many problems with the first cc 2014 so I reinstalled it and now it says that I can not open my project because it was recorded on a newer version. Is there something I can do?

    Hi Gemma,

    It seems that after reinstalling, Premiere Pro no has not been updated to the latest version. Check your application creative cloud for updates. If she says Premiere Pro is up to date, try to update Premiere Pro through help > updates... option in Premiere Pro.

    Thank you

    Regalo

  • Problems with the transfer of project of CS5 with Adobe dynamic link to CS5.5

    Hi all!

    Has anyone had the problem with the transfer of projects with Adobe CS5 at CS5.5 dynamic links?

    When I try to do the film hangs on to clips that are compositions of AE...

    The project of CS5 works perfectly.

    All the compositions of AE CS5 are transerred to AE CS5.5 compositions.

    All 'old' Adobe CS5.5 Pr project Hotlinks are replaced by the 'new' States (I mean, links for AE CS5 composition changed to links to the compositions AE CS5.5)...

    Any help will be appreciated

    Tried to play. Realize that a solution should be around redisplay, ' cos related compositions AE always displayed in yellow as if they were original footages - even I changed a composition within EI, just transitions, if they were, turns red in sequence Pr Pro...

    However, I was unable to re - make "Entire work" even after deleting all files of rendering, only 'effects in the work area.

    So I simply created a new sequence and copied and pasted all the clips of the original movie. Now, I have been authorized to "make any work area.

    This is!

  • Problem with the published parameters between the movement of FCPX

    Hello

    I have a little problem with the settings published between the movement at FCPX.

    For some reason, the published parameters have different values within FCPX in movement.

    For example, in motion, a parameter is - 187.04 and in FCPX is-0,19. What are the parameters of position for CSOS.

    If I try to change this setting in FCPX, the application crashes after 10 seconds or less.

    No idea what is causing the problem? I re-edited the effect several times, same result. The software that I use is FCPX 10.2.2 and 10.2 of the Motion.

    MOTION

    FINAL CUT X

    Thank you.

    The values that you have published on the move have been compared to this project that you created. The values shown in FCPX are "consistent" with any project that you create. Often, you will see the center screen is 0.5, 0.5. Left and below are 0, right and up are 1.0. Or you could see Center of 0.0 and a range between - 0.5 and 0.5. Sometimes, you will see the numbers on the scale of some sort of percentage (vertical values will be 0-100 [%] and the horizontal will be based on the aspect of the project, for example, horizontal will be between 0 and 177.7778 for a project of 1920 x 1080, etc..) It will depend on the type of object and the parameters associated with what you posted.

    If you want to "correct" values in FCPX, you will probably need to rig settings, otherwise, just live with it.

    For what is * why * your model crashes FCPX, that will be another reason and not the difference in the numbers. So, can we get more information on the model?

    To use specific fonts?

    You publish alterations settings?

    Anything out of the ordinary?

  • Can we use latest version of modules and toolkits with the old version of LabVIEW core?

    Hello world
    I'm new to LabVIEW
    I have a question.
    We can use (indeed install) latest version of modules and tools (for example, 2009 or 8.6.1 version) with the old version of LabVIEW core (for example LabVIEW 8.6)?
    No problem?!
    I have 8.6 (rating) of LabVIEW and I want to istall 2009 real-time Module.

    No you can not do. But you can download and install Labview 2009 and module RT 2009 Trail for 30 days.

  • Problem with the executable files

    Hello all, I need a help from you...

    I use LV 2009 SP1 Professional Development Suite on Windows Seven and I have a problem with the executable files, a problem that I have ever found with other versions of LV (8.x, for example) and I'm a little surprised...

    In the attachment you will find an example of what I mean.

    There are two base screws, the main one (prova) and a Subvi (provasubvi). The main vi launches the Subvi and the Subvi simply create a chart. As you can see on the screws works fine, without any kind of problem.

    I also created the exe file, without specifying that no particular option... and 'magic' of the application does not work as I want. In particular, it seems that the Subvi is running, but the front panel will not be accessible.

    I also try to play with the Subvi construction structure and options, but nothing change.

    Did you ever solve something like that?... I would say that I thank you in advance for any suggestion...

    Andrea

    Hello andrea,.

    Looking at your project I've heard that you do not include the Subvi during the build of the project. SO I slightly modified. Please find the attachments.

    Thank you and best regards,

    srikrishnaNF

  • Problem with the method. load()

    Hello

    I have a problem with the. jquery load().

    In my composition, in compositionReady, I use. load() to load a file external html in a regular element of edge - no problem here.

    The loaded HTML code contains a div id = 'spot' - I would like to clik top and pull a comand edge, such as 'play symbol' or 'move this item '...

    the problem is: How can I contact this div?

    I tried variuos solutions:

    $("spot")

    sym.getComposition () .getStage (). $("spot")

    ... and mix a lot...

    I originally thought to write something like

    {$("spot").click (function ()}

    Alert ('clicked spot.');

    })


    Thank you for helping me!


    This will not work because the loaded html file is completely external to the project dashboard animate. Elements in this external file, example #spot, is not 'really' connected to the edge project lead.

    Hope this makes some sense.

    Darrell

  • Problems with the pages of models CS3

    My site is www.cft-aft.org and I have problems with a page or two that were created from a master template that the images are not loading or projection. An example can be found at http://http :// www.cft-aft.org/Get%20Involved.html. I don't know what the problem is or how to diagnose.  All pages of this website have been created from the master template. I had some file management problems in the past, and I think I have corrected most of them (with the exception of the change of name without spaces). I understand that this could be a problem and if it is my problem with this specific page, I understand.

    I have attached a few screenshots of the presentation of dreamweaver and a screenshot of my side of local and remote sites.

    The main problem with the page get involved is not editable images do not exist. Everything lies in the local root folder of the site/htdocs, on both sides. I noticed that when I do to the top of the page get involved in DW is at the top right of the screen, he reads a long path (shown as an example on the screenshot) and on other pages which load correctly, the path is not the same thing, but they reside in the same folder. I suspect that this is probably my problem, but I'm confused, how it got like that and worse still, how fix without having to completely rebuild the page.  I am a total novice and teach me how to do this using the DWCS3 Missing Manual book, but I can't find a solution in there, so please help if anyone can, with step by step instructions.

    If anyone has any idea how it happened, I'd appreciate comments so I do this again.

    If more information is needed, please let me know.

    Thank you

    Hi, Kelly.

    What keeps you from renaming files with Word spaces? It is a good idea. On ALL of your files. Rename them to the INSIDE of the files Panel.

    You work in a defined site? Yes, you are.

    The page you we directed (with an address disheveled, but easy to fix on the track), shows a large number of links to files on your computer, do not using links to other files in your root directory.

    You must open your template and reapply links to all images. Save the model. Once you have re-applied the links in your template Master.dwt, change > models > update of the Pages... while your model is open (especially if DW does not ask if you want to update the files). Record everything (better yet, don't have other pages opens when you update the pages...).

    Depending on how you created your page "Se Involved.html", it would be preferable for you to set up a new page of the child of your template and copy the changing content of the old page. Name the new page (without spaces in the file name... lol...) and save it. You won't be totally rebuild the page, because a lot of it will flow in your model.

    Commenting on your illustration to pdf, you want the indicator model-based Yellow Page in the upper right of your page based on a model of read model: Master. Pages containing the path to the top there are incorrect. I don't know how this happens, but it could be a problem with moving the files outside the DW (bad idea)... always use the files Panel to move files. You have full access to your computer in this window.

    Beth

  • Problem with the instruction FOR... Once again!

    Hello world

    Well, I'm still doing a slideshow of car using external files and can't see the end. The current movie is here:

    http://www.virtuallglab.com/projects.html

    I also enclose the code. My problem is I had initially set up an animation with 2 pictures slide with text and then wait 4 seconds before slipping outside, and then next photos and text would slip in and so on, using a setInterval.
    The problem is the loop FOR seems to ignore the setInterval and slides of the 'wait' service, so buckle up just quickly and get to the last picture, so now the example above, it comes the last picture (I = 9) and that's it!

    Can you do not include another function in a statement FOR. Or is there a way to tell the loop TO wait for all movement is complete?

    Any help greatly appreciated

    ***************************************************

    Mx.transitions import. *;
    Import mx.transitions.easing. *;


    for (i = 0; i < 10; i ++) {}

    var picLeft = "photos /"+ i + ".jpg"; ".
    var picRight = "pics /"+ i +"b.jpg";
    var txtToLoad = "text /"+ i + ".txt"; ".

    this.createEmptyMovieClip("leftHolder",1);
    leftHolder.loadMovie (picLeft, i, leftHolder.getNextHighestDepth ());
    leftHolder._x = - 200;
    leftHolder._y = 15;

    var leftTween:Tween = new Tween (leftHolder, "_x", Strong.easeOut, leftHolder._x, 10, 2, true);

    this.createEmptyMovieClip("centerHolder",2);
    centerHolder.loadMovie (picRight, i + "b", centerHolder.getNextHighestDepth ());
    centerHolder._x = 180;
    centerHolder._y = 250;

    var centerTween:Tween = new Tween (centerHolder, "FLF", Strong.easeOut, centerHolder._y, 15, 2, true ");

    Text._x = 600;

    myData = new LoadVars();
    myData.onLoad = function() {}
    text.carText.text = this.content;
    };
    myData.load (txtToLoad);

    var textTween:Tween = new Tween (text, "_x", Strong.easeOut, text._x, 420, 2, true);

    myInterval is setInterval (wait, 4000);.



    function wait() {}
    var leftTweenFinished:Tween = new Tween (leftHolder, "_x", Strong.easeOut, leftHolder._x,-200, 1, true);
    var centerTween:Tween = new Tween (centerHolder, "FLF", Strong.easeOut, centerHolder._y, 250, 1, true ");
    var textTween2:Tween = new Tween (text, "_x", Strong.easeOut, text._x, 600, 1, true);
    clearInterval (myInterval);

    }
    }


    ***************************************************************************************** ***

    There is no way to tell a loop to wait for. This isn't what they are doing.

    All of the loop for runs (if possible and it is not a kind of infinite loop) completely before whenever the image is rendered.

    If you want to spread in time, you must use the setInterval - but not inside a loop for! If you do this, you immediately set, but the number of intervals of your loop. In this case you will also assign IDS for these intervals to the same variable, replacement effectively the value so you won't ever be able to erase most of these intervals.

    That means rethink you the entire structure. Set up a kind of counter and limit like this:

    var slidesToShow:Number = 10;
    var curSlide:Number = 0;

    Then have your setInterval the curSlide increment each time it is called, and check to see if it showed all the. This is where the "loop".

    As for the other part of your question - Yes you are actually two different issues in progress - once again, you can't do a loop for, wait for anything. So no there is no way to pause while you wait for your pre-teen at the end. But you can be notified when a Tween completes.

    See the documentation on the tween class in the help files. You will find the onMotionFinished event. If you configure one of those to begin with everything that needs to be started when the Tween is finished.

    You should also use the MovieClipLoader class to load your images, because you don't know how long it will take to load. Using this class, you get a nice event (onLoadInit) that tells you when the asset is ready for use.

    Finally, I think that you might want to use instead of setInterval setTimeout. It runs only once, whereas setInterval repeat forever. So I think that your algorithm would be something like that.

    1. load creditrice
    2. when ready to animate in and set onMotionFinished Manager
    3. when the query is finished start loading assets and setTimeout for 4 seconds.
    4. when 4 seconds is up or the clip is loaded (no matter what either takes longer) go to 2 and repeat.

    If this is going to be run locally on a hard drive or CD you will have no problem with the length of time that it takes to load external assets, but if it's on the web it's going to take time.

Maybe you are looking for