Problems with the resolution of display on Android

Similar Questions

• H satellite L505-13 - problem with the resolution of games

  Hello, I have a problem with the resolution of games, I just that:
  800 x 600 and 1024 x 768
  Yet, I have the latest version of the ati driver and directx 11...

  Windows Dectet my monitor properly (plug-and-play), and my screen resolution works well for: 1366 x 768 and 800 x 600.
  on the other hand, when I start a game I have only the choice between these two resolution: 800 x 600 and 1024 x 768...

  All the games don t fit the full screen and there is always a black area on the right and left.

  Some games (crash)... and I thought it made a link with said that I have only 2 resolution.

  I have a toshiba L505 - h - 13 (PSLS9E)
  my graphics card: ati mobility radeon hd 5145 graphics card
  OS: win 7 32 bit

  I hope someone can help me find a solution
  Thanks in advance

  Hello

  I put t know what games you want to play, but generally speaking, it of also depending on the game you can use screen resolutions. For example if your game supports only 2 screen resolutions, you can only use these resolutions.

  So all you can do is update the driver DirectX and display. Then, look for an update (patch) for the game.

  Good luck! :)

• I have a problem with the resolution of Photoshop 6.

  I have a problem with the resolution on my laptop my laptop Lenove userface has a resolution of 3200 x 1800, my 2560 external monitor x 1440, and on two monitors of the user, the interface is so low that I can't read anything. What I am doing wrong.

  On my screen, that the same thing is happening with Bridge and Lightroom, on my laptop, these 2 programs are ok. I use on my Lenovo Windows 8, on my second laptop, I am running Windows 7 and here, I have no problems. I would really appreciate the help.

  There is nothing to do. CS6 does not support displays high-resolution.

  Mylenium

• Trying to solve a problem with the list under display properties screensaver!

  When I try to put my screensaver, gout dwon displays a completely blank entry followed by (None) & the list of available screensavers.  Every time I choose (none), it is up to the last installed screen saver.

  An example: the last installed screen saver was ArcSoft Photobook screensaver.
  So, when I select (none) for no screensaver, it is up to the ArcSoft Photobook screensaver.

  This happens each & everytime I have add a new screen saver.
  (None) option always returns to the last screen saver installed.

  There are moments that I need the option screensaver set to (none).

  Any ideas on how to fix this problem would be greatly appreciated.

  Ed

  Not sure as to what I did, however, my problem with the screen saver has been fixed.

  I've been messing around with a number of things that I thought might have caused this problem.  And wala, suddenly the problem existed no more!

• Upgrading to Windows 7 HP Pavilion dv6500 and have a problem with the resolution

  OK, here's my problem. I had Windows Vista, has been sick with it. I'm not used to ask someone if I can or can not install some software or OS, so I have two formatted partitions (recovery hp too) and installed windows 7 now, I discovered that he had a lot of problems with the drivers. I have successfully resolved all of them, even my hp legacy works and everything else, except the driver Nvidia. My screen resolution is 1024 x 768 and should be 1280 x 800. I tried all the drivers that are provided in the topic above here (dv6000 - dv9000 update for Win 7 or something like that) also downloaded and installed this driver "179.48_notebook_winvista_win7_32bit_beta", nothing helps worked on this problem for 2 days, am tired and ask for help I need resolution 1280 x 800 on my screen , and I now have 1024 x 768.
  Product: HP Pavilion dv6500
  s/n: CNF7310HBF

  p/n: GT391EA #ABB

  AMD Athlon X 2 and probably GeForce 7 GB video series...

  PS sory for my English.

  Dan or one of the others may be able to help if you post exactly what indicates the error.

  As you say you are not a noob so maybe you need to change something in the NVIDIA Control Panel. Maybe go to the advanced option when you're at NVIDIA.

  Personally when I clean installs I delete, and format the entire disk before installing W7. Doing it this way usually prevents this kind of error occurs. When you use the W7 install disk to format, it may not remove all of the old files registry Vista and can cause problems.

  If you start from scratch once again, this may solve your problem, but there is no guarantee.

  It took 4 tries on my HDX from Vista to W7 to do things.

  I just took a glance at my NVIDIA advanced and under Show options there is an option to "manage custom resolutions. Here I could input what I wanted. What's your has that?

• Many problems with the runtime Adobe AIR for Android

  I created an application on Adobe AIR for Android platform, which requires for AIR. The app is very popular in the Android Market, but many users complain of problems with the installation of the Adobe Air runtime.

  For example, these users phones: LG LGE-P698, LG Pecan, HTC Wildfire. But judging by the fact that users have access to the installation of the Air, their phones are compatible with it.

  Tell me how to solve the problem?

  In addition, I have a few questions:

  1. Decides that the problem of demand for export with built-in AIR runtime?

  2. I have create my applications using ADT. In this case how do I seal AIR runtime?

  3. is it possible to invite the user to download and install older versions of AIR? Where can I find her?

  I hope I can help, because the problem is global.

  Hi Astraport,

  I think you should integrate the air in your application runtime,

  Some time ago I wrote a step by step guide, take a look at this post:

  http://forums.Adobe.com/message/3961579#3961579

  I hope it helps

• Problem with the creation and display of intelligent insights

  I have a problem with the intelligent preview function. I use Lightroom 6.4 on Windows 10.

  • When I hit the "Original Photo" icon under the histogram in the develop Module, nothing happens: the remans icon exactly the same and no record Preview Smart is created in the catalog folder.
  • When I create a Smart overview in the library Module (library-> Previews-> generate Smart previews), a Preview Smart folder is created in the catalog folder, BUT , in the module development, l ' icon below the histogram says still 'Original Photo': it does not seem to recognize that a smart preview is available.

  Any idea?

  Rob.

  If everything works as you want, so you can leave the open Historgram.

• Qosmio G40-108: problem with the highest starange display resolution

  I just had mine but on its highest resolution all Web pages have these 11 blocks rectangular semi, barely visible, only the bottom, each about an inch long, is this normal and should I send it to the object of an investigation?

  Hello

  It is very nice to hear that you already have the new Qosmio notebook. I can't say much about your problem because without a screenshot, it is not easy to understand what you mean exactly. On my Qosmio G30 (with the same HD resolution) I have no problem at all. Because of this I can't really understand what the problem is here.

  If possible send a link where we can see what it looks like. Your description is not enough.
  BTW: have you noticed that on web pages only?

• Problem with the resolution when you connect to a projector

  I regularly used my laptop connected to a projector via a cable VGA for PowerPoint and video clips view in Windows Media Player.   It is automatically detected and adjusted for different sizes of screen of the laptop screen (1366 x 768) and projector (1024 x 768) and projected with success.   Recently I connected the laptop to a second monitor - also 1024 x 768 - instead, and even once, it fits perfectly.

  It suddenly stopped setting for the resolution of the projector; When I go to the resolution of the screen, the option to set the resolution of the second screen is grayed out.   No matter if I use extend or duplicate, he insists that the two screens are 1366 x 768.   This has happened with two projectors, all two used to work properly.   I also tried different VGA cables.  The end result is that the image of the projector is hurry to tray.

  I can connect fine to the second monitor via the VGA port and sometimes with different resolutions for both screens.   I can also connect to a TV via an HDMI cable.   I can't try a HDMI cable for the spotlight as it is ceiling mounted, and the other is old and is not an HDMI connection.

  I checked the drivers and they seem to be up to date.

  My laptop is a Dell Latitude running Windows 7.   The graphics card is an Intel HD Graphics 3000.   I tried many suggestions already given on these forums without success.   The real puzzle is that it was working fine and nothing I can draw has changed except that I connected on the other monitor.

  Hi Tony,.

  Thanks for the reply with the status of the issue. I'm sorry to know that the issue is still unresolved, your efforts to solve this problem are much appreciated.

  I suggest to follow the method below and check if that helps:

  Method 1: Perform a system restore.

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  System restore WARNING: when you use the system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Method 2: Uninstall all hidden devices:

  Step 1: See the article below to activate the devices hidden in Device Manager.

  Look at a hidden devices

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff553955 (v = vs. 85) .aspx

  Step 2: After you enable hidden devices, remove devices from Device Manager.

  1. press start.

  2. type device manager in the start search box.

  3. Select Device Manager in the search result.

  4 uninstall everything that are grey also uninstall the drivers to display completely.
  5 restart the computer and install the drivers to view the manufacturer's Web site.

  Hope this information helps, just reply to the State of the question to get help.

  Hi Rizwan

  Unfortunately, I do not have a restore point old enough until the problem occurred.   I have not found any that was relevant in hidden devices, but in normal Device Manager mode when I clicked on "monitor" it opened a "Generic PnP" entry even when there was no extra monitor or projector fixed.   When an additional monitor has been attached, there were two of these entries.   I disabled them both, and I found that I can now adjust the resolution of a second monitor to a different setting of the laptop screen.

  Thanks for your help.

  Tony

• Having problems with the resolution of the screen from the 1st upgrade.

  Hello, I have a tower running Windows XP Professional Service Pack 3 and upgraded to Service Pack 2 of Windows Vista Business, and he had problems while improving the pc. I lived the degrading resolution and become more pixel and color has begun to degrade. It didn't happen until I updated. and now the upgrade was a success and the resolution of the screen was horrible. Color is distorted, and some icons are not yet. The resolution is 640 x 480 pixels and the color was at its lowest level. I changed the higher color bit and the graphic resolution is improved, but the size of the screen was always the same. I tried to put my monitors resolution which is 1280 x 720 pixels, but when I put it on this resolution, the quality and graphics began to become distorted and never changed size. then, once I applied it, it go back to the lower resolution and color. And I updated my computer during upgrade. Is there anyway that I can fix this?

  Thank you!

  Hello

  try going to your graphic card manufacturers site or computer and are looking for the driver download section

  Search your computer or graphics card model number based on what you have and download and install the latest graphics drivers for vista

  then try to make the screen of solution of problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

  If no Vista drivers are available for your model the only advice we can give is to change the graphics card to a compatible Vista

  read the system requirements below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/products/system-requirements

  Support for graphics DirectX 9 with WDDM and 128 MB graphics memory (32 MB for the basic home edition)

• Problem with the resolution of the screen on Windows 7. Help.

  Shot something went wrong with my resolution to screen on windows 7. It worked fine until the last day, but when I turned on my desk today, don't be was not passed the windows logo 7 at startup, so I turned off and then back on it and did a repair startup that did not set the startup, then I did a system restore and it worked.

  However, when I connected, the screen resolution changed from 1024 x 768 and recommended resolution is 1440 x 900 . All other resolutions are available, except that which is required for my HP monitor. I have tried a few things to fix the problem, as the system restore, reinstalled-graphics, reinstalled the Windows 7 operating system several times but nothing happed. Help, please. Here is a screenshot of resolution available.

  

  Help. Help. Help.

  This should get the correct resolution listed.

  Find and install the drivers for the monitor for Windows: http://support.hp.com/us-en/document/bph02073

  Also if you have an NVIDIA graphics card, you can create a resolution custom from the NVIDIA Control Panel.

  http://www.nvidia.com/object/custom_resolutions.html

  AMD / ATI: http://support.amd.com/en-us/kb-articles/Pages/GPU-10-SupportedResolutionsUnavailableforMonitor.aspx

  J W Stuart: http://www.pagestart.com

• Problem with the extended help display option for multiple displays.

  I have a laptop with an internal (#1) designated as my screen main screen. At work, I like to use the 'extended display' option for several screens to use the external desktop as #2 display monitor. However, at home I have the screen internal one on my laptop. So when I open an application like Excel at home, the window does not appear, but the application is running, as I confirmed with the Task Manager. So far, the only way I know to solve this problem at home is to change my display settings for multiple views to show on display #1 only. Is there a practical way to deal with this issue in addition to change the display settings whenever I move from work to home and vice versa?

  Hello

  In Windows 7, you can simply press the Windows Logo + P key.

  In the menu, select the item from the computer only .

  Concerning

• Problem with the dialog box displayed when the RadioButton is selected.

  It is an application with 3 buttons button1, radio 2 and output key that uses System.exit (0)
  The problem is with the dialogs first two buttons

  1. I open the application

  2 Select a radiobutton, I get a dialog box, I click 'ok', dialog will, that's fine.

  3. I choose an another radiobutton button1 or button2, I get the corresponding dialog, BUT know I have to click 'ok' twice to keep it alive.

  I don't know what could be the problem, here is the code:

  package com.thinkingblackberry;
  import net.rim.device.api.system.Display;
  import net.rim.device.api.ui.Color;
  import net.rim.device.api.ui.DrawStyle;
  import net.rim.device.api.ui.Field;
  import net.rim.device.api.ui.FieldChangeListener;
  import net.rim.device.api.ui.Graphics;
  import net.rim.device.api.ui.component.ButtonField;
  import net.rim.device.api.ui.component.Dialog;
  import net.rim.device.api.ui.component.LabelField;
  import net.rim.device.api.ui.component.PasswordEditField;
  import net.rim.device.api.ui.component.RadioButtonField;
  import net.rim.device.api.ui.component.RadioButtonGroup;
  import net.rim.device.api.ui.component.RichTextField;
  import net.rim.device.api.ui.component.Status;
  import net.rim.device.api.ui.container.MainScreen;
  import net.rim.device.api.ui.container.VerticalFieldManager;
  import net.rim.device.api.ui.component.PasswordEditField;
  
  public class HelloWorldScreen1 extends MainScreen implements FieldChangeListener, DrawStyle {
  
      protected static final int RED = 0;
      MButtons fullscreen;
      //protected RadioButtonGroup rbGroup= new RadioButtonGroup();
      public HelloWorldScreen1() {
  
          final RadioButtonGroup rbGroup=new RadioButtonGroup();
  
          setTitle("Application");
  
          RadioButtonField rbField= new RadioButtonField("RadioB1"){
  
              protected void paint(Graphics g){
                  g.setColor(Color.ROSYBROWN);
                  super.paint(g);
              }
          };
          RadioButtonField rbField2= new RadioButtonField("RadioB2"){
              protected void paint(Graphics g){
                  g.setColor(Color.SIENNA);
                  super.paint(g);
              }
          };
          RadioButtonField rbExit=new RadioButtonField("Exit"){
              protected void paint(Graphics g){
                  g.setColor(Color.DARKSLATEBLUE);
                  super.paint(g);
              }
          };;
          rbGroup.add(rbField);
          rbGroup.add(rbField2);
          rbGroup.add(rbExit);
          add(rbField);
          add(rbField2);
          add(rbExit);
  
          rbGroup.setChangeListener(new FieldChangeListener() {
              public void fieldChanged(Field field, int context) {
              if (rbGroup.getSelectedIndex() == 0) {
                  Dialog.inform( ""+rbGroup.getSelectedIndex());
  
              }
              else if (rbGroup.getSelectedIndex() == 1) {
                  Dialog.inform( ""+rbGroup.getSelectedIndex());
              }
              else if(rbGroup.getSelectedIndex()==2){
  
                  System.exit(0);
              }
  
              }
          });
  
      }
  
      public HelloWorldScreen1(long arg0) {
          super(arg0);
      }
  
      public void fieldChanged(Field field, int context) {
  
      }
  
  }
  

  I guess the event changed field is called twice, once deselection button1 and once to select button2. you pay your processing logic to account for this.

• Problem with the resolution of my screen after installing Windows on my ASUS laptop K51AE 8.1.

  At first I used the Windows 7 operating system before you download and install the student version of Windows 8 on my ASUS K51AE track. I fully configured my laptop with the new software setting with my own parameters before noticing that everything on the screen seemed very pixelated operation and large, in order to solve the problem, I tried improving the resolution to something higher up on the list but unfortunately I was not given another option to go to. The laptop is locked for the resolution of 1024 x 768 when I used the resolution of 1920 x 1080 front on Windows 7. I'm still not able to click / tap on the option of the current setting of 1024 x 768, I don't know why this is happening? Please ask help?

  Hello

  You must download and install the latest graphic drivers of Windows 8/8.1 ASUS for your machine, as it has been defined for Windows 7.

  If none are available, you will need to upgrade, if you can, your graphics hardware to solve the problem.

  Normally, you would have embedded chart that you can not change

  ASUS:

  http://www.ASUS.com/support

  See you soon.

• A problem with the composite video display mode

  Hello!

  Since this morning, the composite video display mode of my sequences is black with a blue stripes dotted line.

  Each sequence is displayed with the same problem.

  Can you help me please?

  Lily.
  

  Hi Lily,

  Go to the file/project settings/general and change the rendering on "Mercury Playback Engine software only" engine.

  Press OK, you will get a dialog box in which you must select 'Remove Previews'.

  Try these steps and see if it works.

  Kind regards

  Navdeep Pandey