Problems with the Tablet mode

Similar Questions

• Problems with the Display Mode target on end 2009 27 "iMac

  Used late 2009 iMac 27 "in the view target in conjunction with a Dell XPS tower with i7 processor, Windows 7 and the best graphics card I could afford at the time connected by HDMI to mini display port cable.  Worked well for years.  Set aside Dell for a few months and the update of the iMac to El Capitan OS 10.11.3.  Recently tried old setup with same Dell PC and was able to move from Mac to PC, but the PC screen resolution was at the lowest setting. I got an error message when enabling/disabling to PC who said there was a problem with the port causing mini display of the system back to the lowest resolution. Impossible to reset at a higher resolution.

  I tested the Dell PC on another monitor, and it works very well at higher resolution (2560 X 1440). Now, when I reconnected it to the iMac (which works fine), the screen becomes black.

  Is it possible that the operating system upgraded (El Capitan) is not compatible with the targets using mini display port Display Mode?  Any ideas?

  Use your iMac as a display with the target - Apple Support Display Mode , also consider having a bad cable or connection. Does not hurt to try different cables, they can and will the bad!

• problem with the away mode system

  problem with the system of mode in the bios but canoe away find it in bios to disable

  Mode absence in Windows Vista
  http://www.Microsoft.com/whdc/system/pnppwr/powermgmt/awaymode.mspx
  See the download link at the top right.

  Also:
  Open Control Panel, click "Power Options."
  There are 3 "power management" available:
  (1) balanced
  (2) power Saver
  (3) high-performance (see the supplementary schemes)

  Click "change plan" to the "Balanced" plan
  Then click "change advanced power settings".
  Scroll down and click on the + next to the "media settings", then click on the + sign next to the option "when sharing media.

  Finally change the "Setting" mode to one of the three choices: "Allow the computer to sleep", "prevent the idling to sleep" or "allow the computer to remote mode.

  In case you want to choose either #1 or #2.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Problems with the VCA mode when moving to Vcentre 4.1

  Hi all

  I currently have three ESXi 4.0 update 3 host running in a cluster. Two servers are identical and the third a later generation of CPU. The cluster is running in mode VCA Intel i7 with success.

  Also, my server Vcentre is 4.0 update 3 running on a 32-bit Windows Server 2003 R2.

  I built a new server on Windows Server 2008 R2 Vcentre and I am running Vcentre 4.1 update 1.

  I did the exercise to my old server Vcentre guests to my new. No problem until I try and their cluster. My server with the latest CPU is not allowed admission to the cluster. The new cluster is running same EVC mode as the old cluster.

  Need to update 4.1 Vcentre 1 be backward compatible for EVC modes with respect to the material?

  The servers are all DELL R710, the old two servers running XEON X 5570 processors and the latest Intel XEON X 5670 processors host tracks

  Do I have to update all 3 hosts 4.1 before I can redefine the clusters in EVC mode?

  Hoping that someone has been through a similar experience and can advise you. Unfortunately, I do not have a test lab to run it on.

  See you soon. Mark

  I don' t think you need to upgrade to ESX host.

  I think try in the following order:

  (1) turn on VCA for cluster

  (2) add the latest processor, select baseline and then old processor server.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1003212

  -A

• I had problems with the color mode. kept, restart photoshop to find the problem. NOW Photoshop CS6 will not organize, it is stuck on "initializing". How to start?

  At first my documents were pasted on the CMYK color mode, and I couldn't understand how to convert the file in RGB.

  Finally, I abandoned, saved the file and tried to present what I was working on a Web site.

  Before that, I closed photoshop and he raised 2 times in a row to test color on profiles. When finally it seemed to me he decided to go back to RGB, I closed and returned to climb my image. However, the site did not accept it because the jpg was in CMYK. So, I went to relaunch photoshop to convert its color profile and now photoshop will not launch.

  As a first step, it got stuck on "checking memory."

  I closed my computer to see if this would clearly be the question, then tried to restart photoshop and it is now stuck on "initializing".

  I really need photoshop work, so how can I solve this problem?

  Laptop: The Retina of Macbook Pro screen

  OS: OSX 10.11.3 EL Capitan

  PS: Adobe Photoshop CS6

  It is the first time that I ever had this problem, and I've had this program for 2012.

  Hi shiblets,

  Please press the home button on the keyboard when you see the screen "initializing".

  If it does not, please press the SHIFT key and then launch Photoshop, to ignore the third party Plugin.

  Kind regards

  Tanuj

• ? the problem with the "Develop" mode

  Downloaded Lightroom (cloud Creative) to the new computer.  Photos very well in library view but do not appear mode develop.  Empty deep blue screen only.  How can I fix.  Cannot change.

  Hi delberth,

  Go to the Lightroom preferences > performance > uncheck 'use graphics processor' and then check.

  Kind regards

  Claes

• Problem with the mode standby in Windows 7

  Hello friends,

  I have a big problem when Windows 7 updated itself. I have a laptop Toshiba Satellite L505D. When I close the lid, it will automatically 'sleep' mode. Unfortunately, the screen is black and the laptop is still in progress, I have to stop it and then turn. Is it a problem with the driver 'stack '? Please, help me :)

  >.. After Windows 7 update itself
  How to understand this?
  Have you installed the Windows updates or what?

  Have you tried to restore the OS using System Restore tool and check if the problem persists?

• a problem with the alignment of site on the Tablet and phone version.

  I have a problem with the alignment of my site on the Tablet and phone Version of my site.

  If you open the Tariffuehrer.com site on the tablet or smartphone, you can see, the page is aligned to the left in the browser. I want the page to Center. I did find an option for it in the backend of muse.

  I'd be happy if someone can help me.

  Hi Michael,

  I can't view your site as it showed error 403,

  Can you please recheck the url of your site and repost it so that I can check on this subject.

  Kind regards

  _Ankush

• How to solve the problem with the wacom tablet and the polygonal lasso tool. It does not work with a pen.

  How to solve the problem with the wacom tablet and the polygonal lasso tool. It does not work with a pen. I have install windows 10 and fresh, new drivers for wacom bamboo, could he makes problems or there is a problem of photoshop?

  It should do.  You use one of the buttons of pen maybe?  Just touching wheels with the pen with no buttons or modifier keys.  Press ENTER to close the selection.

  Personally I never use the lasso, Polygonal, but rather just the Lasso tool by using the ALT (Opt) to operate the Polygonal tool.  I also use the mouse instead of the Tablet for the selection of cutting edge.  It is a little too uncertain where the point will go when hovering the stylus above the image.

• Problems with the navigation links in EDIT mode in the Business Catalyst Muse sites.

  Has anyone else had problems with the navigation links / EDIT mode in sites Business Catalyst Muse?

  In EDIT mode, I can't use the list drop DOWN the SELECT DIRECTLY to go to another page or a link. The drafting of the text or label works, but to actually go to a /visit link a hard link is broken.

  

  Others have this problem as well.

  No work around?

  Thank you!

  I have the same problem! Contact BusinessCatalyst today taught me that it is a known bug and have Adobe Muse to fix! LiveChat ticket No. #159685

  When I launched the Web site in may 2015 everything worked well, but since the update of CC, this problem occurred.

  The tip of solution, I received the BC is to always use the navigation menu bar. This does not work for me because my client wants a menu of polaroid...

• Problem with the Desktop version, Tablet and phone. Help, please.

  I created a website in Muse. I created the Desktop version, Tablet and phone. But my problem is that, once I open my website on my tablet or phone it shows not always the correct form. Most of the time it's to show the offline version even if I am looking on my phone. What can I do?

  Hello

  I watched address phone and noticed 2 flaws.

  1 URL internationalchangepartners.com no redirects to internationalchangepartners.com/phone when I tried on the phone.

  Please do the following to solve this problem

  Hello, I made a site using the 3 platforms: desktop, Tablet and smartphone, but... on tablets and smartphones appears the design office, no idea why?

  2. now when I check link internationalchangepartners.com/phone I saw that the Menu options are linked with pages of the tablet.

  To over come this I suggest you to select hyperlinks with a lot of attention. Once you select the Menu item and add the hyperlink, select the option under the phone if you are available for the phone.

  Hyperlink has a separate list of the link for each structure. Look at the screenshot below.

  

  Once there 2 flaws were fixed there is no problem with the site.

  Concerning

  Vivek

• Problem with the input query mode. FRM 41009, 40301

  Hi all
  
  I have a problem with the mode of input query. What can I say, I'm in the mode of input query, and I click on a button. I get the error THAT FRM-41009 displayed.
  
  Now, I've wanted handled. So I created a trigger of error in order to handle the error.
  
  IF ERR_CODE = 41009 THEN
  NULL;
  END IF;
  
  A problem is that when you use the null value, it will not terminate the mode of input query, and then I get frm-40301 error.
  
  Second, it's that I can't use exit_form in a trigger of the error.
  
  I am aware that I can press F4 to exit this mode, but I don't want to do whenever I'm sure I'll get the user complaints.
  
  Another solution would be to put the following code in the trigger when key pressed for each button in the form:
  
  If: system.mode = "ENTER-QUERY" then
  exit_form;
  end if;
  
  But I don't want to reproduce this code in my form.
  
  Please can you give me an idea how to handle this correctly?
  
  Thank you
  Michael
  
  PS: Version of the form = > ORACLE FORMS 10g (Forms [32 bit] Version 10.1.2.3.0)

  I have a problem with the mode of input query. What can I say, I'm in the mode of input query, and I click on a button. I get the error THAT FRM-41009 displayed.

  What is the code in the trigger of your button When-Button-Pressed (WBP)? Maybe you should check to see if the form is in the Mode query in your WBP rather than try and remove the error? In other words, eliminate error - do not delete it. :)

  If you want instead to remove the error, there is a technique to built-ins call restricted to a trigger that does not allow them. Do this by the use of a millisecond zero Timer. For example:

  /* Sample On-Error Trigger */
  DECLARE
    n_err_cd   NUMBER := ERROR_CODE;
    t_on_error TIMER;
    ZERO  NUMBER := 0;
  BEGIN
    IF ( n_err_cd = 41009 ) THEN
      /* Create Timer to execute Exit_Form() */
      /* to Cancel Query-Mode. */
      t_timer := Create_Timer('ON_ERROR', ZERO, NO_REPEAT);
    ELSE
      /* Handle all other errors here... */
    END IF;
  END;
  

  /* Sample When-Timer-Expired Trigger */
  DECLARE
    v_Timer  VARCHAR2(30);
  BEGIN
    v_timer := Get_Application_Property(TIMER_NAME);
  
    IF ( v_timer = 'ON_ERROR' ) THEN
      /* Notice, the timer name is case sensative! */
      Exit_Form;
    END IF;
  END; 
  

  I am aware that I can press F4 to exit this mode, but I don't want to do whenever I'm sure I'll get the user complaints.

  Well, it's just standard features of Oracle Forms. If you switch the Mode request form - you must run a query or cancel the query Mode! This is how it works. Your users need to understand that and accept it - just as they accept the functional also for other programs. ;) Another option would be to add a "Cancel request" button to your form and make it so it is enabled only when the form is placed in Query Mode. Just a thought...

  I personally prefer to prevent the occurrence of an error rather than remove the error. :)
  I hope this helps.
  Craig...

• Updated to Lion - problems with the mode of the unit

  I've recently updated my iMac - 8 GB ram, 1 TB hd - manufactured 2010.

  I had a VM for pre-existing (Win XP Pro) that I had left my PC.  Although very well, I can use the virtual machine in stop mode, the unit was very buggy.  I lost control of the mouse, the screen redraws is a problem and copy / paste between the VM and the Lion are incompatible.

  I've upgraded to the latest version of VMware 3.1.13 - (sorry if this isn't the correct version number - but I've upgraded).

  Has anyone else had problems with the mode of the unit?

  VMWare has been notified of this issue and if so, is there no work around?

  Thanks for any help on this.

  You reinstall your VMware tools after upgrade to 3.1.3 Fusion?

  Go to the menu of Fusion, the Virtual Machine-> install VMware Tools, after completing the installation, restart your guest and see if the unit is very well.

• HP 1350 printer peripheral will not stay in offline mode. Problems with the Wi - Fi driver

  Hi I have a Dell desktop with printer HP 1500 computer.  After printing several documents, the printer has gone offline.  Troubleshooting indicates the problem with the Wi - Fi driver.  The printer is connected to the computer makes a Wi - Fi connection has to do with it?  I have add a portable Wi - Fi system recently.

  Hi, Mt48,

  Is the printer a 1350 aio or deskjet 1500?  You have listed two different models.

  Windows operating system?

  To resolve this problem, perform the following steps:
  1. Right-click on the my computer icon and choose manage, then click Design Manager.
     In the currency Manager there will be the USB root hubs (there may be several USB root hubs) perform the following steps for all root hubs:
  2. Right click on the USB root hub and go to properties, then the power management and uncheck 'Allow the computer to turn off this legacy to save energy' in the Design Manager.

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=UK&TaskID=110&prodSeriesId=439153&prodTypeId=18972&ObjectID=c01475742

  Monofunctional and multifunction printers - HP printer is offline message appears on the computer and the HP product does not print

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c02221706&lang=en&cc=us&TaskID=130&ContentType=SupportFAQ&prodSeriesId=306884&prodTypeId=18972

  Look for your version of Windows and select printing HP and the Scan Doctor - this is a diagnostic utility

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=306889&lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=306884

• Problems with the resolution of display on Android

  We have a problem with the display on our Google Nexus 7 (2013) resolution and our Multi-Folio App. If we keep an article within our published application Multi-Folio, the article does not use the mode full screen of the tablet. But when I look at the article inside the content viewer, use the full screen of the tablet. For your information: we use the 1280 x 800 resolution and the Tablet has the highest resolution of 1920 x 1200.

  
  

  However, IOS, it works without problem. We use iPad 4 (2048 x 1536) with article 1024 x 720 resolution. Do you have an idea of what we can do? In this post, you will find two screenshots that describe the problem.

  
  

  

  

  For some reason, the content isn't be transposed into the application of multi-folio like that in the v28 content viewer. Have you tried updating your application multi-folio on v28?