Problems with the Touchpad drivers and printer without administrative privileges.

Similar Questions

• I have a problem when using Google Maps, at a certain point my custards computer window and says there is a problem with the display drivers and he recovered, but it is not. Problem does not occur with Int Explorrer, so I don't think it's the computer

  When using google maps via Firefox, after asking a place which is not the General section of North America who comes up regularly, the firefox screen becomes white with a narrow banner at the top. A message appears in the lower right corner that says something on display drivers having had a problem, but now have been recovered. However, the display is not recover and the message of the banner is that Firefox is not responding. When I go to restart Firefox if I'm about to restore, the page is still frozen.
  I don't think there is a problem with my computer because it doesn't happen if I used to go to google maps, then G-cards works normally.
  This phenomenon didn't happen before the last update Google or Firefox. I used Fiefox for some years and also Google Maps on previous computers and on this one and not had it before.
  It is a relatively young computer (Asus EeSlate 121) less than a year. I have used Firefox since I bought it and until recently had no problem with Google Maps.

  I solved it myself, after the 'note' that was FF/Mozilla, just as I finished my message, commenting on what it was that my system was, I wnnt back to check my plug-ins, etc. I downloaded the latest Java, the TWO 32-bit AND 64-bit versions and latest Firefox.
  Now everything works.
  Thank you
  B.

• Satellite A200 - 13 M - XP x 64 - problems with the modem drivers and webcam

  Hello!
  I recently installed Windows XP x 64 on my laptop.
  I have two devices that do not work properly.

  (1) does anyone know how to get the driver for the built-in modem? There is no version the x 64 required for download.

  (2) the webcam does not work. I had a problem of 'Windows Image Acquisition': error telling me to put this service to activate the webcam. The problem is that this service is, by default, already activated.

  Thank you for your help.

  Hello

  You are right. 64-bit drivers are not available. Unfortunately, 64-bit version is not supported. To be honest, I'm sure that the modem is not so important for you and you can turn off this feature.

  I can't say much because I use the 32-bit operating system only on webcam.

• Problem with the touchpad doesn't work is not on the computer.

  Today, I was on YouTube, listen to music, when I turned the volume up to full. My laptop (ASUS) is a VERY high - pitched shrill sound that would not stop until I turned the laptop on sleep. When I turned on the laptop back, the screeching stopped but my Touch Pad stopped working. Fortunately, I have a USB mouse which I use now. I tried following the instructions to activate the keypad, but it does not work. I restarted my computer, and that did nothing.

  Help would be GREATLY appreciated.

  (also, I had problems with this laptop in the past, involving having to solve every time turned to have internet access, but a day that goes by and now the internet accessibility works very well.)

  Hi Lucie,.

  Thanks for posting your query in Microsoft Community Forum.

  What is brand and model your computer?

  Problems with the touchpad can occur due to a number of causes, including cables that are not connected properly, lack of updates, corrupt or drivers incompatible or because of hardware problems. So, I would suggest trying the following steps and check if the problem persists.

  Method 1:

  Try to run the suite of equipment fixit and see if the problem still occurs.

  Hardware devices do not work or are not detected in Windows

  Method 2:

  See the additional steps provided in the following article.

  Mouse, touchpad and keyboard with Windows problems

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• KB2887069 Windows update fails to install, even with the audio drivers and uninstalled AV

  KB2887069 Windows update fails to install, even with the audio drivers and uninstalled AV.

  Background: I am setting up a pavilion of 500-164 equipped with OEM specs, specifically:

  -AMD/Radeon APU

  -Windows 8 6.2.9200

  -See sysinfo below for more details

  The PC brought to the specifications of the plant, with all Windows updates applied with the exception of KB2887069, which breaks down at the update.  With the exception of troubleshooting the failure of the update, none of the changes have been made.  The Windows KB2887069 update fails to install as well through the automated process when tried manually via a direct download.

  Additional troubleshooting measures to date include:

  -Uninstall the software OEM AV (Norton), then by restarting.

  -Temporarily disable all the features of Windows Defender.

  -Temporarily uninstall the audio driver (IDT High Definition Audio CODEC) OEM.

  -Realization of an analysis of the SFC system (with no error found).

  Results: The Windows Update full KB2887069 with a failed State and produced the following results.

  2014-11-15 19:25:08:807 3488 1 b 84 Misc = logging initialized (build: 7.8.9200.17099, tz:-0500) =.
  2014-11-15 19:25:08:807 3488 1 b 84 Misc = process: C:\Windows\system32\wuauclt.exe
  2014-11-15 19:25:08:807 3488 1 b 84 Misc = Module: C:\Windows\SYSTEM32\wuaueng.dll
  2014-11-15 19:25:08:807 3488 1 b 84 Manager:
  2014-11-15 19:25:08:807 3488 1 b 84 Handler: START: Manager: installation CBS
  2014-11-15 19:25:08:807 3488 1 b 84 Manager:
  2014-11-15 19:25:08:807 3488 1 b 84 Manager start installation of CBS update BCA9DC69-8FB6-4B79-8E1B-E706B32B55C9
  identity of 2014-11-15 session 19:25:08:807 3488 1 b 84 CBS Handler: 30409011_3339369637
  the package identity 2014-11-15 19:25:08:807 3488 1 b 84 CBS Handler: Package_for_KB2887069 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.2.1.1
  2014-11-15 19:25:08:822 3488 1 b 84 Manager stand-alone installation with source=C:\Windows\SoftwareDistribution\Download\c3f79bd7f837c5015dba3018d0ab7d67\windows8-rt-kb2887069-x64.cab, workingdir = C:\Windows\SoftwareDistribution\Download\c3f79bd7f837c5015dba3018d0ab7d67\inst
  2014-11-15 19:25:12:567 3488 Manager e00 FATAL: CBS called error with 0x8007371b.
  2014-11-15 19:25:13:269 3488 1 b 84 Manager FATAL: full install of CBS update with type = 0, requiresReboot = 0, installerError = 1, hr = 0x8007371b
  2014-11-15 19:25:13:378 3488 1 b 84 Manager:
  2014-11-15 19:25:13:378 3488 1 b 84 Handler: END: Manager: installation CBS
  2014-11-15 19:25:13:378 3488 1 b 84 Manager:
  2014-11-15 19:25:13:378 880 fa0 Agent *.
  2014-11-15 19:25:13:378 880 fa0 Agent * END * Agent: installing updates [CallerId = wusa]
  2014-11-15 19:25:13:378 880 fa0 Agent *.
  2014-11-15 19:25:13:378 6676 1a0c COMAPI > COMAPI - RECOVERY -: install [ClientId = wusa]
  2014-11-15 19:25:13:378 6676 1a0c COMAPI - tender installation complete (successful = 0, succeeded with errors = 0, failed = 1, missing = 0)
  2014-11-15 19:25:13:378 6676 COMAPI - restart required 1a0c = No.
  2014-11-15 19:25:13:378 6676 1a0c COMAPI - WARNING: exit code = 0x00000000; Call error code = 0 x 80240022
  2014-11-15 19:25:13:378 6676 1a0c COMAPI-
  2014-11-15 19:25:13:378 6676 COMAPI COMAPI - END - 1a0c: install [ClientId = wusa]
  2014-11-15 19:25:13:378 6676 1a0c COMAPI-
  2014-11-15 19:25:17:605 6676 1 a 10 COMAPI - COMAPI: IUpdateServiceManager::RemoveService -.
  2014-11-15 19:25:17:605 6676 COMAPI 1 has 10 - ServiceId = {b043431c-3a5f-4bf5-b5b2-34a542b07e41}
  2014-11-15 19:25:17:683 6676 1 a 10 COMAPI IUpdateService removal scan volatile package service, serviceID = {B043431C-3A5F-4BF5-B5B2-34A542B07E41}
  2014-11-15 19:25:17:683 6676 1 a 10 COMAPI WARNING: ISusInternal::RemoveService failed, hr = 80248014
  2014-11-15 19:25:17:683 880 524 Agent WARNING: WU client omits CClientCallRecorder::RemoveService with error 0 x 80248014
  2014-11-15 19:25:18:385 880 1a7c report REPORT EVENT: 2014-11-15 19:25:13:378 - 0500 1 182 {807311FF-2CC0-45E2-B903-238AD59E6377} [AGENT_INSTALLING_FAILED] {3CE1E1A4-CA14-4F2A-BEA1-71029F73AFD6} 101 501 8007371 b wusa error content install Installation error: Windows failed to install the following update with error 0x8007371b: update security for Windows (KB2887069).
  2014-11-15 19:25:18:385 880 1a7c report CWERReporter::HandleEvents - WER report upload completed with status 0 x 8
  2014-11-15 19:25:18:385 880 1a7c WER sent report: 7.8.9200.17099 0x8007371b (0x8007371b) 3CE1E1A4-CA14-4F2A-BEA1-71029F73AFD6 install Unmanaged 101
  2014-11-15 19:25:18:385 880 1a7c report CWERReporter finish event management. (00000000)
  2014-11-15 19:35:18:718 880 1 to 28 in THE # to THE: initialization of automatic updates.
  2014-11-15 19:35:18:906 880 1 to 28 WuTask WU Uninit Manager tasks
  2014-11-15 19:35:19:795 880 1-28 Service *.
  2014-11-15 19:35:19:795 880 1-28 Service * END * Service: out of Service [exit code = 0 x 240001]
  2014-11-15 19:35:19:795 880 1-28 Service *.

  I find it peculiar that you just bought a HP computer brand new, still-in-the-box, which came with Windows 8, not 8.1, preinstalled Windows. That said, cross your fingers, roll up your sleeves and try the fix following multiple step, I cooked up just for your computer...

  ACTIONS

  [You may want to print these instructions for reference offline.  IMPORTANT => NO SKIP & perform all steps in one uninterrupted session!  [If a step said to restart, restart! ]

  1 right-click on the link, select SAVE TARGET as.... & download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file that you saved in step #1 above and select run as administrator to run the Norton utility. DO TAP not your keyboard until the race ends, then restart.

  4. right-click on the following link and save the download to your desktop: ie8 - rereg.all.zip [1]

  4B. right click on the file that you saved in # 4 has & select EXTRACT ALL. This will create a new folder in Office also appointed ie8 - rereg.all. The folder contains both scripts below (plus a third that will NOT be).

  Note-online scripts are good for IE9, IE10 & IE11, too,

  5. close all open applications (that is, anything with an icon on the task bar), open the folder created in step # 4 b above & double-click on the file named ie8 - rereg.32on64.cmd to run the script.

  5 b. Repeat this for the file named ie8 - rereg.64on64.cmd then restart.

  6. reset Internet Explorer by the MANUAL of instructions on this page-online http://support.microsoft.com/kb/923737

  Note => for best results, check the option Remove personal settings .

  7 run the Windows Update Troubleshooter from start to finish by the first paragraph on this page-online http://windows.microsoft.com/en-us/windows-8/troubleshoot-problems-installing-updates [2]

  8. restart once more then test by launching a manual check of updates & see if KB2887069 any/all others updated and allows to install now. Follow all the instructions.

  9. assuming all went well, see if Windows 8.1 is available through the store Windows and, if so, if it will be properly installed. Still, follow all the instructions.

  • Upgrade to Win8.1: FAQ
    http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8
  • The upgrade to Win8.1 tutorial
  
  http://Windows.Microsoft.com/en-us/Windows-8/update-from-Windows-8-tutorial
• What's new in Win8.1?
  http://Windows.Microsoft.com/en-us/Windows-8/whats-new

10. assuming that Win8.1 is now installed, perform another manual check for updates & install all Security updates offered (if any); Follow all the instructions.

11. in response to this post with a status report. Also confirm (hopefully) that Windows 8.1 has been installed successfully.

Good luck!

===========================================================
[1] source: page http://iefaq.info/index.php?action=artikel&cat=42&id=133&artlang=en of my colleague IE MVP Kai Schatzl

[2] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

• I started having problems with the wireless mouse and the carpet of my laptop - Lenovo ThinkPad T420 mouse.

  Original title: right click on the mouse itself activating

  I borrowed a USB to a person at work and I started having problems with the wireless mouse and the carpet of my laptop - Lenovo ThinkPad T420 mouse. The left click of two devices works normally, however, sometimes she does not respond to clicks and it takes a few seconds to work. The left button was constantly starts to turn on, as if he was stuck. After that I hit Alt + Tab and modify windows it stops for a few moments and starts at a later date. I havo not found a specific condition or a combination of keys that may trigger the fault.

  I read a few posts on discussion forums, but all say that it could be a hardware problem, which I think is not, because both devices have the same problem and I'm sure it all started with the insertion of the borrowed memory stick. I scanned the readers to help Symantec's EndPoint Protection and installed Microsoft Security Essentials and performed a full scan, but found nothing. I even restored the system, but the problem remains.

  Should I get a different antivirus? How can I find the cause so I can find a better targeted solution?

  Try to install the drivers from this link and check.

  http://support.Lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=MIGR-77167

• How to solve the problem with the wacom tablet and the polygonal lasso tool. It does not work with a pen.

  How to solve the problem with the wacom tablet and the polygonal lasso tool. It does not work with a pen. I have install windows 10 and fresh, new drivers for wacom bamboo, could he makes problems or there is a problem of photoshop?

  It should do.  You use one of the buttons of pen maybe?  Just touching wheels with the pen with no buttons or modifier keys.  Press ENTER to close the selection.

  Personally I never use the lasso, Polygonal, but rather just the Lasso tool by using the ALT (Opt) to operate the Polygonal tool.  I also use the mouse instead of the Tablet for the selection of cutting edge.  It is a little too uncertain where the point will go when hovering the stylus above the image.

• Problem with the touchpad after upgrade to Windows Vista

  After that I've upgraded to windows vista I had problem with the touchpad, that I'm not?

  Can U help me!

  Maybe when you tell us what model of laptop you have. ;)

• Equium L10: Problem with the main battery and battery RTC

  Hello

  I have the Toshiba Equium L10 and it is about 14 months old and I have problems with the battery and how much time it takes after a full charge. I also have problems with the RTC battery and an ERROR 0271: check date and time settings message when I turn on the laptop.

  Regarding the battery, I can fully charge it upward in about 3 hours, but when I start to use it, apparently in the last few hours around one and a half or so and then it needs to be recharged. I can have down for about 40 minutes and then turn it off and come back later or in a day or two. How long should I expect from a fully charged battery?

  About the batttery RTC, it really becomes a pain and I only started to get the message of the ERROR 0271 start-up, in recent weeks. I can charge the battery pack and then leave for a few days, but when I turn it on, I get the message ERROR 0271 on the date and time incorrect. Surely after a full charge, the RTC battery should last longer than a few days?

  The manual says that if the RTC battery is exhausted or becomes weak, you must charge the battery of the CCF for 24 hours, in a different part of this manual indicates between 24 and 48 hours, but how can load you for long when the sections concerning the charging battery pack status after charging the battery you unplug the power adapter because leaving connected will shorten the life expectancy of the Battery Pack. So, how we can charge the battery of the CCF for 24 to 48 hours if we shouldn't leave the AC adapter plugged in once the battery is charged - which is nearly three hours. Suggestions about these problems would be appreciated.

  Besides we all know that it is easy to change the CMOS/RTC battery in your desktop base unit, but is it easy to change in a Toshiba Equium L10?

  Concerning

  Brave0

  Hi Brave0,

  The normal recommendation for the CMOS (RTC) battery is to leave the laptop connected to the power supply at least 12 hours when the main battery is fully charged. The charging circuit is going to hijack the current to the load automatically RTC battery and no current will be forwarded to your main battery.

  Recommendation do not leave the power adapter is plugged in the main battery is fully charged is really only applicable to older laptops that used no batteries Li - ion and therefore they had to be completely discharged before recharging to avoid any effect 'memory' of the battery.

  With modern Li-ion batteries, it is quite safe to leave the battery when fully charged and still power the laptop from the AC adapter. The charging circuit will pass all the battery charge if it is fully charged.

  Kind regards

• problem with the Finder - files and folders displaying incorrectly

  After acquiring a new iMac, I noticed a problem with the Finder - files and folders are displayed wrong (see table).

  This is what happens always after the files have been transferred from one folder to another. I was reminded of my days of using Mac OS in the 1980s when automatic setting of files was not so "automatic." I use Mac OS for decades and I don't remember the last time I had to think about GUI problems like that.

  Other problems in the graphical display of files and folders were introduced, such as when you have hundreds of files in a single folder, you end up deleting about 30 to 40 of them say in a particular section, and you end up with gaps of the ChartSpace where files used to be, that is the remaining files automatically rearrange themselves (fill in these gaps) - never. A week later, you open the folder, and the gap of GUI is still there.

  I decided to do a clean install of the operating system but nothing works.

  Is there some setting in Prefs I'm missing?

  

  Hi there highland99,

  Looks like your folder icons are not accommodating themselves automatically you plan to do. To me, this indicates that you have organize by the None value in the view menu. You can change the way files and folders are prepared automatically by clicking on view > reorganize by and selecting how you would like that fixed.

  Thank you for using communities of Apple Support.

• I get the message: Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Visit the Web site of the manufacturer of the video card for the latest version of the software.

  Photoshop has been giving me the warning:

  Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Visit the Web site of the manufacturer of the video card for the latest version of the software.

  Also other programs are affected.  I suspect a recent download of Adobe.  Can anyone HELP.

  No, it has nothing to do with updates of Adobe. There is a problem with your video card driver.

  Go directly to the Web site of the manufacturer of the GPU for updates (not Microsoft, not a System Builder).

• Problems with the radial tool and the gradient filter tool.

  I have suddenly problems with the radial tool and the tool filter degraded.  They are turning to my red while selection that the assets and not with the results of the any adjustments.  It is a new issue and out now where

  Does that help? Note that the tool must be active to see the check box.

  

  In addition, another reason, that you do not see it could be that the toolbar is not displayed. The toolbar display switch is to press the letter T.

• Problem with the clone stamp and Healing brush, as soon as I use them I get a second image duplicated on top that move with the tool

  Problem with the clone stamp and Healing brush, as soon as I use them I get a second image duplicated on top that move with the tool

  You're apparently talking about Photoshop, so I'll pass this on Photoshop beginners forum.

• Beta 5 of Firefox does not check the updates from an account without administrator privileges and won't ask administrator privileges apply downloaded update

  I can't get Firefox Beta 5 to check the updates using an account without administrator privileges. Beta version of Firefox 5 downloaded an update (from 2 Beta Beta 3), and now, there's a button apply update in the Firefox window that won't hurt, even though the update is properly applied from another account with administrator privileges.

  I use Windows 7 Professional 64-bit. In general, I use Firefox for an account without administrator privileges and provide the only administrator credentials when you are prompted to install or remove software.

  Delete the files in the folder updates\0 and updates.
  
  You may need to remove active - update.xml and updates.xml so, if it is present.

  C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
  (%LOCALAPPDATA%\Mozilla\Firefox\Mozilla Firefox)
  

  • http://KB.mozillazine.org/Software_Update (Update works not properly)

• HP 15 laptop: problem with the touchpad and the key "stuck."

  Hello!
   
  Last weekend, I have an irritating problem with my HP 15 laptop. Bought two years ago and upgrades to Windows 10 a year ago.
   
  First of all, my touchpad started to not work properly. It "freezes" and I can't use it until I click the ESC key, but it doesn't last and "freezes" again a few seconds later. Then, everytime I open a window where there is a text box (Start menu, edge browser, Control Panel, etc.), the number 5 is entered automatically and permanently, as if the button 5 has been blocked. I did a quick check and button 5 do not seem physically stuck.
   
  Yesterday, I restored the system to the factory settings, so I'm back to 8.1 for Windows and then upgraded to Windows 10. Everything seems to work fine, but this morning, the problem was back. Is there something I can do? What is the problem caused by Windows 10 or the computer? Should I restore it to Windows 8.1? Everything worked great til last weekend, I don't know what that was.
   
  Thank you in advance for your help!

  Welcome to the HP support community @gouch3.

  I understand that you have a problem with the keyboard and the touchpad on your laptop from HP 15.

  Have you tried to use a keyboard external and mouse at all?

  Have you tried to go to Safe Mode to see if the problems persist in there?

  Have you tried to perform a material or forced reset Reset?

  Did you do a test of material?

  Have you updated your drivers?

  gouch3 wrote:

  ... Is there something I can do? What is the problem caused by Windows 10 or the computer? Should I restore it to Windows 8.1? Everything worked great til last weekend, I don't know what that was.

  It could be a driver problem to be able to look at that for you, I need your model number. I wish I could give you an answer or not, but at this point without the troubleshooting results and the model number, it is difficult for me to say.

  I can say that if everything works in point 8.1 of Windows without problem, the driver TROUBLESHOOTING is a great place to start. Please try to follow these steps for the keyboard and the touchpad of troubleshooting:

  • Beginning
  • Search for Device Manager
  • Search results, open Device Manager.
  • Click on display
  • Show hidden devices.
  • Click the arrow next to keyboards.
  • Right click on the name of the keyboard device.
  • Select uninstall.
  • Continue deleting the names of devices in the category keyboards until the feature of all the names have been uninstalled.
  • Restart the laptop twice.

  Touchpad:

  • Type of research, "Device Manager."
  • Click on Device Manager,
  • Expand mice and other pointing devices.
  • Right click on the TouchPad,
  • Click on uninstall.
  • Restart the computer laptop twice,
  • Reinstall the TouchPad card.

  I found a document of troubleshooting for you to try also called Portable keyboard troubleshooting. Please be sure to follow the steps described in this document.

  The best document I have for TouchPad problems is the use and troubleshooting of the TouchPad and ClickPad document. 

  Here is a link to the HP Support Assistant, if you need it. Just download and run the application and it will help with the software and drivers that need to put up-to-date.

  This is a great question other clients may also be questioned. When we came to a resolution, please share what has worked for you with others by marking this post as an acceptable Solution. If you want to show appreciation for my efforts today, please take a second to click the Thumbs Up button below.

  If you need assistance, I would be more than happy to continue to help you. Please re-post with the results of the resolution of the problems. Could you please also provide your model number (How can I find my model number or product number?)

  Thank you!