Problems with the update of Windows on Windows 8 and also updated to Windows 8.1.

Similar Questions

• Having a problem with the update of the window. He said that windows could not search for new updates. It's the found error 80245003 code

  Having a problem with the update of the window. He said that windows could not search for new updates. It's the found error 80245003 code

  Take a look at this article as it addresses this error code. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem with the installation of Windows XP on the Satellite A200-1RK

  Hello!
  I ve you have a problem with my laptop.
  I would like to install Windows XP SP2 instead of Vista, but I had a problem with the hard drive,
  Windows XP Installer cannot find the hard drive. It is problem with drivers disk, but the site of tohsiba I can´t find my laptop and the disk for XP drivers.
  Why?
  Can someone help me?

  Maybe I can use drivers from another laptop A200 series, but which?

  Hello
  a good explanation how to install XP on a SATA machine can be found here:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=29342

  Welcome and good luck

• Problems with the update of Flash Player.

  Problems with the update of Flash Player.

  After download, installation begins, but when the progress bar completes a typical Windows error message appears stating:

  (literal translation from Spanish):

  

  "can't find the procedure entry point SetDIIDirectoryW in the dinamic links library KERNELL32.dll.

  IHAVE: windows32, XP + FlashPlayer worm: 11.1.102.55 + MozilaFirefox10.0

  Flash works well, but I can't make a new update since Version: 11.1.102.55

  Please help me, thanks

  You have two options:

  • install SP2 & SP3
  • try if the Windows 2000 solution works: http://forums.adobe.com/thread/1012569

• I just wanted to know at all, if you encounter a problem with the update of creative cloud as if I was (error 1001), I discovered that my Webroot AntiVirus has been the origin of the problem. I turned it off and it updated correctly. Hope that helps some

  I just wanted to know at all, if you encounter a problem with the update of creative cloud as if I was (error 1001), I discovered that my Webroot AntiVirus has been the origin of the problem. I turned it off and it updated correctly. Hope that helps some people I've seen so angry about it here by searching for the answer myself.

  Thanks for sharing this, yes turning Firewall works.

  Concerning

  Stéphane

• having problems with the pop-up windows of analytical Google all of a sudden and now the pages are crashing or being redirected

  original title: google analytics popups

  Ive been having problems with the Google analytic pop-up windows all of a sudden now pages break or redirected, I've ran Malware, Windows Defender, a direct care, Avira, Avast and F-secure, and nothing seems to have read on other forums to help, that his may be a Trojan horse: Trojan.osx.Dnschanger.B... ive also rebooted my router as suggested in some forums , but nothing seems to help?

  Hi NicolaaTC,

  See the links below and check if it works.

  What is the browser hijacking?

  http://www.Microsoft.com/protect/terms/hijacking.aspx

   

  Difficulty of your web browser hijacked

  http://www.Microsoft.com/security/spyware/browserhijacking.aspx

• problem with the installation of window package

  Impossible to install, i-tunes, quick time and I downloaded Security software. Error message indicates a problem with the windows package install. On Vista, this is a fairly new problem
  Thanks in advance
  Jack

  Hi Jack8053,

  Thank you for visiting Microsoft Answers.

  · The error message you get when you try to install a software, what exactly?

  · Remember to make changes on the computer before this problem?

  It seems to be that some of the files windows install is corrupt. I have a few steps that might help you to solve the problem:

  Method 1

  Make sure that the Windows Installer service is running.
  1 open run and type services.msc, and then press ENTER.

  2. in the services window, locate the Windows Installer service in the services list.
  3. check that the status is "started". If the condition column is empty,
  Right-click Windows Installer, and then select start.
  4. change the Startup Type to automatic (default is Manual), then
  Restart the computer.

  Method 2

  Run a scan of the file system [SFC] checker on the computer that will replace missing or corrupt files.

  To do this, follow the steps below:

  1. click on the Start button.

  2. on the Start Menu, click all programs followed by accessories.

  3. in the menu accessories, right-click on command line option.

  4. in the drop-down menu that appears, click the "Run as Administrator" option.

  5. If you have the User Account Control (UAC) enabled, you will be asked permission before the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.

  6. in the command prompt window, type: sfc/scannow then press ENTER.

  7. a message is displayed indicating that "the system scan will start.

  8. be patient because the analysis may take some time.

  9. If all the files need replace SFC will replace them. You may be asked to insert your Vista DVD for this process to continue.

  10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

  11. once the scan is finished, close the command prompt window, restart the computer and check.

  For more information, see the link below:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212

  Method 3
  1. If it does not help, try to uninstall Windows install using the Windows Installer Cleanup utility:

  Description of the Windows Installer Cleanup utility

  http://support.Microsoft.com/kb/290301

  2 restart the computer.

  3. download and install the latest version of Windows Installer by downloading from the link given below:

  Windows install 4.5 Redistributable

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  4. try to install the program and check that it works.

  Hope the helps of information. Please post back and we do know.
  Concerning
  Joel S
  Microsoft Answers Support Engineer.

• Problem with the 2007 Hallmark card studio deluxe installation and get error message "Error 1904.Module that cannot save c:\windows\syswow64\msxml4dll".

  Original title: 1904.Module error cannot save C:\windows\SysWOW64\msxml4dll. HRESULT 2147023782 contact your support staff

  I want to install hallmark card studio deluxe 2007 and I got this message

  C:\windows\SysWOW64\msxml4dll Error 1904.module cannot save. HRESULT 2147023782 contact your support staff.

  Someone knows how to fix this?

  Thank you

  Hi Roman,.

  Thanks for posting in Microsoft Community!

  It seems that you have a problem with the installation of Hallmark card studio deluxe 2007 and will receive error message "Error 1904.Module than c:\windows\syswow64\msxml4dll cannot be saved."
  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.
  I may need a few more details to better understand the issue.
  1. deal with any issue when installing any other program?

  2. did you of recent changes on the computer before this problem?

  Method 1:
  I suggest you to run the fixit and check if it helps.

  Solve problems with programs that cannot be installed or uninstalled
  http://support.Microsoft.com/mats/program_install_and_uninstall

  Method 2:
  If the problem persists, I suggest to perform the clean boot and see if you can install the software.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135
  Note: After the boot minimum troubleshooting step, follow step 3 in the link provided to return the computer to a Normal startup mode.
  Method 3:
  If the problem persists, I suggest you try to remove all the temporary files in the temp folder. And check if it helps.
  Follow the steps to clear the temp folder:

  a. click the Start button and in the search in %temp% bar and press ENTER.

  b. the Temp folder opens, press on Ctrl + A , and then press delete.

  Note: I suggest that you backup important file or a folder in the Temp folder.

  You can check the links for more information:

  Install a program
  http://Windows.Microsoft.com/en-us/Windows7/install-a-program

  Install programs: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/installing-programs-frequently-asked-questions

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• Problems with the update 12/05/09

  I tried several times to install the following updates downloaded by auto update 5/12
  Update of security for Microsoft PowerPoint 2007 (KB957789)
  Update for Microsoft Office System 2007 (KB967642)

  Dungeon updates not only give me an error code 8007066F Windows Update encountered an unknown error. I don't know when I search this error code. Should I try a different approach to the update? I am running Windows Vista Ultimate 32 bit.

  After beating my head against the wall for several hours (days) research and try a lot of different things I contacted the support of Microsoft Office. While there was time, their Tech Support solved the problem that apparently was having problems with the installation of Microsoft Office that would not allow updating. The solution required unistalling all the Office applications, doing some cleaning and then reinstall Office. Once this was done the updates installed successfully, like Service Pack 2. It was required a research engineer - it was way beyond my abilities. I am pleased to say that the problem is solved and I can't stress enough how much I care I just started with this option and saved manny, many hours of time and frustration. Experience with the support person, that I have had - spread over some time - has been remarkable. You save time and headaches - if you find any information on your error code get help from M/S even if you have to pay for it. If your time is worthless as it's well worth.

• Someone at - it problems with the update to Adobe Acrobat DC latetst 15.006.30172?

  There seems to be a corruption with the last Adobe Acrobat DC udpdate 15.006.30172

  Our users are not able to initiate a review shared on the network server.
  Anyone else having problems with this update?

  THX

  Hello

  Today we released a hotfix that resolves this problem shared his comments that was recently introduced. If you're not already updated to the latest patch, simply open Acrobat and visit help > check for updates to apply this hotfix.

  More details about this release and bug fixes is available here: https://helpx.adobe.com/acrobat/release-note/acrobat-dc-june-02-2016.html

  Please give it a try and let us know.

  Thank you

  -ashu

• I now have a problem with the update for Windows Live Essentials 2011

  I don't understand how it happened, but maybe someone could enlighten me?

  First of all, I was informed of an update for Microsoft Security Essentials. So of course, I did the update because I didn't want to be protected.

  I don't know if this is related somehow. I think that my update understood also as a Windows Live Essentials package. When I checked my e-mail and instant messaging, I noticed that the format has changed, and now, I think it's the new WLM 2011.

  It may seem very nice and put up-to-date, but it caused a series of serious problems for me. Let me explain:

  First of all, I must clarify that I am disabled and use the speech recognition, Windows speech recognition Dragon NaturallySpeaking both, because I can't use my hands.

  In the original WLM before the update, if I were using Dragon NaturallySpeaking, I was able to dictate with great ease and had no problem. If I wanted to then send the email I would say just 'send' and e-mail would go. With WLM 2011, if I say that now, it does not work.

  It's just a problem that I have. The next problem is much larger. In some cases, Dragon NaturallySpeaking speech recognition will not work and I can't dictate anything. I then have to close WLM completely and then open it again. Then only, it'll work. This happens many times and it's very frustrating, as you can imagine for someone like me.

  Forgive me for saying, it may seem very well with all the new bells and whistles there, but it makes my life a misery at the moment. In my view, there are a lot of bugs that need to be sorted out first with her.

  My question is, can I go back to the original WLM somehow until the update meets my needs? Can I go back to the status quo when WLM 2010 worked well with speech recognition for me?

  If so, can someone tell me how to do what you please?

  If not, then how am I supposed to use these features now?

  Thank you

  HB

  You will find support for Windows Live Messenger in these Windows Live help forums: http://windowslivehelp.com/forums.aspx?productid=2 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I have problems with the installer of Windows and Windows Update, and the solutions that I found for the two each rely on the other broken system to fix the first.

  I use a laptop HP Pavilion dv4-1220us with Windows Vista Home Premium Service Pack 1, a 64-bit operating system, and I have problems with Windows Update and Windows Installer. When I try to install programs, I get the following, or substantially similar message without the error code:

  "Error 1719. The Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed properly. Contact your support team. »

  So I tried to download Windows Installer 4.5 and install it. When I try to start the installation, it always hangs on the first step, "Initializing Installation."

  After searching for a solution to this problem, I found that Windows Update may have a solution. So I downloaded the 64 bit version and got a file named 'file Windows6. 0-KB942288-v2 - x 64. I tried to run this file. He opened a box that said, in order "Prepare for Installation", "Full Preparation", and finally "Searching for Updates ', before you open a second box, which reads" click OK to install the following Windows software update: fix for Windows (KB942288). I clicked on OK in this box, which opened another box, which says at the top "updates are installed" and in a smaller section, "initializing for Installation................... »

  However, no matter how long it works, it never gets past "Setup initialization."... »

  So I tried to run Windows Update in Control Panel. He ran for a while, before giving a message saying "to check the updates, you must first install an update for Windows Update." I clicked on the button that says "install now". He has flashed, a moment, "download and installation of updates' before you go to the"check for Updates"and then he brought back the exact same upward ' to check updates, you must first install an update for Windows Update" message as before. I clicked install now once again, only to go into the exact same loop. After about four times in a loop, I gave up on it.

  So I tried to install Windows Installer 3.1v2, which took a while before saying "not enough memory is available to process this command." and the abandonment of the installation.

  So, I tried to download a program from 'Mr. Fix - it' of Microsoft. It downloaded fine and then failed on installation, because of the same Setup error I received initially.

  Finally, I tried to restart my computer and each solution is represented. Then I clean my computer and each solution is represented.

  In conclusion, the mistakes that I have in Windows Update and Windows Installer cordoned off each other, as the mistakes of each program are based on the other program to be repaired. I'm at my wit's end here. My computer works fine without one, except that I can't install new programs. I can access the internet fine, access files fine, all my scans have developed own... I don't really know what is happening. Can someone help me with this?

  Try the sfc scan:
  http://support.Microsoft.com/kb/936212

  If not, repair of Vista:
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• Problems with the installation of windows updates and reboot the computer

  When you try to restart the computer it freezes on "installation updates.do not turn off computer.". Currently have 20 updates which will not be installed. computer says CCC.exe prevents the computer from restarting and getting error code 80240016 when you try to install the updates

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/957307

  Error message when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site: "0 x 80240016.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not resolve the problem:

  Windows Update Forum:

  It's updated operating system Vista, upgraded installation and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost, are kindly Error Codes and exactly what happens when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Problems with the upgrade to Windows Windows 7 10 and get the message 'could not be updated. "portable

  Original title: Windows 7

  I have 2 questions-

  I have a laptop Windows 7 when I tried to update Windows 10 received a message that it could not be updated.  Has there never been a solution or an update for those of us who have a version of Windows 7 which initially could not updated for Windows 10?

  I have a computer I upgraded Windows 10 and really like it.  I do not understand that I can not make a copy of 10 Windows on a computer, I've updated for Windows 10.  Is it possible for me to download a copy of Windows 10 on my laptop Windows 7 to make a restore CD in the case of a computer problem?

  You can try the upgrade manually:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

  You also have the possibility to choose 'Keep personal files only', which guarantees a successful in most cases installation.

• Windows Vista is freezing after brief use. It began after the machine has run an automatic update on Wednesday morning (11/11/09). Have their problems with the update?

  The machine is relatively new and was working perfectly until the upgrade.

  Hi iapr97

  Welcome to the Microsoft Answers Forum!

  We would like to know more information related to this topic

  ·         You receive a correct error message or error number when the computer crashes?

  ·         All updates were installed successfully? Are there updates failed?

  To check if there are updates failed, follow these steps

  i. Click Start, in the search box, type in update

  II. click on windows Update

  III. click view update history

  I recommend you to start the computer in a clean boot to determine if any third-party application is at the origin of the problem. To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to run check and clean boot if you have the problem.

  i. Click Start, type msconfig in the search box and press ENTER.

  II. If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  III. in the general tab, click Selective startup.

  IV. under Selective startup, clear the check box load startup items.

  v. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  VI. click OK.

  VII. When you are prompted, click on restart.

  VIII. after the computer starts, check if the problem is resolved.

  If the problem is resolved, check what is the cause of the problem, referring to the link given below: http://support.microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  i. Click Start, type msconfig.exe in the start search box and press ENTER.

  II. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  III. on the general tab, click the Normal startup option and then click OK.

  IV. When you are prompted to restart the computer, click on restart.

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.