Problems with the updates after the system recovery

Hello.

After about a week after the system recovery, my computer tried to install updates 110 and stuck on number 56 for more than 3 hours.

If I disconnect the battery and restart the system stuck halfway through the Configure updates - again for several hours.

Someone knows what's the problem?

Regards Terry

Hello Terry,

Thanks for posting your question on the Microsoft community.

Thank you for details on the issue.

This problem can occur because corrupt Windows Update files or parameters.

I suggest you run the Windows update troubleshooting tool and check if that helps. Please follow these steps:

a. press Windows + C keys and click on research.

b. type Troubleshooting in the search box, click on it in the search results.
c. click 'show all' and then click 'Windows Update'.
d. click on 'Next' and follow the on-screen instructions.

If this does not help, please reset the Windows update components and check.
Refer to this article:
How to reset the Windows Update components?
https://support.Microsoft.com/en-us/KB/971058

Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
https://support.Microsoft.com/en-us/KB/322756

I hope this information helps.

Please let us know if you need more help.

Thank you

Tags: Windows

Similar Questions

  • Windows 7 on Satellite A500-1EE - problems with the system recovery

    After five years of good functioning sth went wrong. The system tries to boot but lack access to a device (HARD drive?). And then tries to download files to recover. After downloading the recovery fails and the only option is to shut down the computer. How can I recover this system?

    Recovery process is very simply.
    Did you create the recovery media (DVD)? If so you can use it for recovery image installation.
    Otherwise, you can use HARD drive recovery option (F8 > to fix your computer) and start the recovery image installation.

    Please test F8 option.

    If you have any other questions you are welcome.

  • Problem with Windows Update after the removal of Virus

    My operating system is Win Vista 32 bit, had some virus closed my windows updates, have a view of the white page. Checked that my services and win update is in automatic mode has started, so I don't know why my updater gives me a red x saying windows updater is turned off.  Any suggestions?

    [Original title: Windows Update]

    https://answers.Microsoft.com/en-us/protect/Forum/protect_other-protect_scanning/problem-with-Windows-Update-after-removing-virus/3a8dd279-2732-4693-88bf-f5cea4afca96>

    It makes more sense. How to reset the Windows Update components?

    Yet, as indicated in The ball , the search results links do not work. I also used several browsers and DuckDuckGo. Maybe it's because the Windows Update Agent was changed some time ago and the article is no longer valid.

    EDIT: If the OP is also struggling to access the link I suggest using repair Windows updates available from tweaking.com. I suggest also using the Registry backup of the same author before hand.

    Repair the Windows updates

    http://www.tweaking.com/content/page/repair_windows_updates.html

    Registry backup
    http://www.tweaking.com/content/page/registry_backup.html

    I hope this helps.

  • Satellite C40D-C - problems with the system

    I recently bought an a toshiba satellite C40D-C Series notebook PC as my old satellite - essentially - is dying. After you connect to the internet, I tried to download AVG Antivirus on my computer that I don't have - and never - trust McAfee anti-virus that comes with the computer. Every time downloaded AVG then restart my computer, the computer goes directly into the automatic repair system and doesn't let me do anything but to reset or restore. This has happened even with completely removed McAfee. I've been on AVG directly today (January 15), and they have to do remote set-up for me - with the same results. Yes, I'm aware that McAfee is a selfish cry of a system and refuses to acknowledge any other antivirus, but that this issue happens even with completely removed McAfee shows clearly that it is something that Toshiba has worked in the system. I can't even disable the automatic repair tool. I have to be stuck with a McAfee antivirus which, moreover, does not yet or is Toshiba will make an effort to help solve a problem they caused?

    Why this computer isn't allowing AVG Antivirus work? And why, after each attempt to download AVG, the computer goes to auto repair whenever I shut down or restart? Is this a problem with the system or something, Toshiba has done on purpose?

  • Anyone who has a problem with the system crashes when importing using the new interface to import

    Anyone who has a problem with the system crashes when importing using the new interface to import

    Can specify you what Adobe program you use so that we do that your post is in the right forum?

  • Problem with Windows Update after the new installation of Windows 7 Pro the Lenovo ThinkPad X 200

    I'm trying to do a fresh install of Windows 7 Pro on a Lenovo ThinkPad X 200. The product key is easy to find on the sticker of the ThinkPad. However, the version of Windows is hidden (for example, I can't check that my ThinkPad had originally installed Windows 7 Pro). I was able to install by using a Pro Win 7 SP1 CD ROM I bought for another installation. I used the ThinkPad I was trying to make the new facility on the product key. I was able to activate the Windows 7 Pro using the phone call and my cell phone. I checked the activation! However, I have problems with Windows update. The product key may be a different version of Windows 7. If so, why did it install and activate OK? Y at - it a fix for this problem or I have to buy a new version of Windows 7 Pro? Please note that I have not yet installed all drivers Lenovo ThinkPad as I can't seem to install correctly. Thank you!

    Since the issue is updated to Windows, it is not a product number key.

    You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:

    How to reset the Windows Update components

    http://support.Microsoft.com/kb/971058

    Suggest you download and save the Fixit. Then configure the system before the clean boot by running:

    How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

    http://support.Microsoft.com/kb/929135

    Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

  • problem with the system restore when you try to back up disks

    my system crashed.  would not boot.  Several attempts later, went to the system recovery... do you have a full upward (23 dvd) then did a complete restore.  laptop works.  However restore my files from the backup disks does not work.  I get a failure in the system restore somewhere in the treatment of the disc 12 (out of 23).  Help!  sighing heavily... of course this happens when I am in a time crunch

    Hello cyberterp. I see that you are having problems to restore your data from backup disks. To make sure that I understand you were able to make the recovery of the operating system, but the data you have saved in the course of the process you're trying to get now?

    Check the bottom of the twelve disc and make sure that there are no scratches on it. If there is even the smallest scratch to find a local store that will shine the disc for you; This can allow you to read the data. If discs are in perfect condition and then either media are bad or there was a problem (unnoticed) during the backup process and it is unlikely that you will be able to recover the data.

  • HP officejet 4620 there is a problem with the system printer or ink 1000008 0x6

    PTR does not print page alighn.  keep saying "there is a problem with the printer or ink system 0 x 6 1000008' I turned market several times."  I unplugged.  I remove and reinsert the ink cartridges. I removed and reinserted the paper AND

    I always get the same message!

    This article should help to resolve the error you get:
    http://support.HP.com/us-en/document/c03081973

    Try the steps and tell us if it helps.

    Good luck!

  • Problem with the systems

    Hi, I have a Hp pavillion dv 6426us, recently sometimes it freezes, and I have to turn off manually. I use firefox and it oftens gel too (not), it happens every time I use it for a few seconds or more, I have tried to reinstalled firefox and it still does this. even other programs like anti - virus, yahoo Messenger, nearly every program I use will do (no response) for a few seconds before it works. So I think I have a problem with the computer, what do I do to fix this? Thank you

    I backup your personal data and restore the system to factory condition. This will clear up all software problems.

  • Hi, not really a new Member, but I'm having difficulty with the system recovery.

    I have an Acer Aspire 7741Z, I know he's older. It has windows 7 Home premium on it. I guess the hard drive went bad because I replaced it and it seemed to work. I put the system recovery discs that I bought at Acer last week and it rises to display disk copy files and looks like it loads the images file. But then it stops and gives me an error message that says "do not copy the file to the HARD drive. File G:\Images\WOP000400OENSC121103. STORMWATER MANAGEMENT.  I'm not worried about record data at this stage, just try to get the computer to work.  I don't know if I was sent a 'bad' disc or what.  Any suggestion would be great.

    Alexa

    Good for you! I suppose that insufficient disk space might also explain why the installation stopped at the same place.

    Try typing F2 when you first see the Acer bios screen to get back into the bios menu. Make sure your new hard drive is first in the boot order. F10 to exit and save the settings.

    Jack E/NJ

  • A lot of programs provided with computer went after full system recovery

    I had to do a full system recovery, but now, all types of factory programs are missing! For example, Microsoft Works and Office and many accessories such as games and calculator. Anyone know why this happened and how can I get these dos programs?

    My system is a HP Pavilion Entertainment PC with Windows Vista

    Thank you!

    Hello

    If you are having problems with software missing after using the recovery of manufacturers process contact the manufacturer

    It's their recovery process not microsofts

    Contact HP

    http://welcome.HP.com/country/us/en/contact_us.html

    or HP support froums

    http://h30434.www3.HP.com/

    How to replace Microsoft software or hardware, order service packs and replace product manuals

    http://support.Microsoft.com/kb/326246

  • Problems with Windows Update after uninstalling SP2 (Vista Home Premium)

    Hello, everyone!

    Two days ago, I tried to install SP2 through my Windows Update. During the installation and then restart, it stopped on step 3 (0%), ignored and open Windows normally. But, I realized that I had totally lost Aero (I didn't even have the option in the window color and appearance), and also Windows Update constantly gave me the message that I always important updates - SP2 has not installed correctly (I rebooted the computer several times to try to resolve this problem, but everything remained the same: stop on step 3) ", running Windows, and once again the message that I've updated important). I searched in various forums, but could not solve the problem, so I decided to uninstall SP2 via Control Panel. But it doesn't let me do that - whenever I clicked on the button uninstall, it says that the installation is not finished yet. So, I tried the system restore, but whenever I clicked it, an error message (that I didn't understand at all) appeared. So, I went into safe mode and tried the system restore and it worked (Control Panel uninstall option does not in Mode safe either), and everything is back to SP1. But now I have problems with Windows Update - I get the error message 0 x 8007002 (and even 0 x 8007005 several times). I tried everything I could find in the forums (the thing with automated updates service does not because I don't have this option in Services), but nothing works. If anyone has any advice whatsoever, I would be really grateful for that, because I don't know what to do.

    For safety, I use NOD32 anti virus, Tall Emu Online Armor and ThreatFire.

    Thank you very much!

    Hi EvanaZgb,
    Thank you for visiting the Microsoft Answers forum.

    I would say to first disable the anti virus and other security software. Then proceed as follows:

    STEP 1
    ------------
    Download and install the latest version of Windows Installer
    To install the latest Windows Installer, visit the Microsoft Web site at the following address:
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

    Step 2 now try to update again and post back with the results
    ------------
    Cleanup, utility to download and install the Microsoft Windows CleanUp utility. To do this, see the Microsoft Web site: http://download.microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

    Now try to update again and post back with results

    Thank you

    Martin
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Re: Partitioning is a problem with the Toshiba recovery system?

    I'm french, so don't be afraid of mistakes.

    I wonder if I can I repartition my HARD drive I want

    First, I explain what I realized with the FAQ:
    If Vista wouldn't boot, Toshiba Recovery in WinRE (eisa configuration) hidden partition offer we have to fix, and then use the DVD burn or HDDRecovery directory in E: to repair partition.

    My question is if I don't have the DVD (or I lost it):
    If I can I repartition my HARD drive (not the partition recovery, but expand the C: partition to reduce E :) partition without causing problems to recovery?)
    In other words the recovery to the boot partition will update the position of recovering files in E:
    And if it works, can I just copy - paste the E: c: HDDRecovery then E: while I format E:
    Thank you for your answers

    Juju313

    Hello!

    If you copy the folder of disk recovery HARD complete with all the files it should normally work, but I do not know Mr. I had never tried it.

    But if you have the Toshiba disk recovery is on the safe side. So, you can restore the factory settings whenever you want.

    Good bye

  • Problem with the Dell recovery and backup system

    Hello

    I have problem with dell backup and restore in my dell laptop (inspiron15). When I select the backup factory option > choose a drive then continues, he said 'Please sustained insert blank to keep media. "
    However, blank disc is already inserted and formatted with the live file system. Please help if anyone has the solution.

    Thank you

    Hello

    Thanks for your reply.

    Usually, the blank DVDs would be already formatted and ready to use as they are writing discs once. Please try to create the backup disk without formatting the DVD.

  • Problems with the system SupportAssist credentials

    I created a specific service for SupportAssist account called restrictions that I would use for the credentials of the system.  The account is a local administrator on the server as well as a part of all of the available of OME groups. I checked that I could log in to the OME site with this account.

    However, when I try to set these credentials as the credentials of the SupportAssist system, I get the following error.

    Unable to connect to OpenManage Essentials
    SupportAssist cannot connect to OpenManage Essentials. Please provide the credentials of a user account that belongs to one of the following groups:

    • Directors of OME< i="">
    • OME power users
    • OME Site administrators

    I uninstalled and repaired the OME and SupportAssist so that to restart the services, etc.  I have also confirmed that the other account identifying information work, including my own OME, access credentials. Any ideas on what's going on?

    Thank you!

    Thanks for sharing of screenshots and other information related to this issue.

    Here are the correct steps in Add a service account domain for system identification information in SupportAssist:

    1. prior to any change in SupportAssist, add the service account to the users on the management server running SupportAssist.

    • Server-> Configuration management-> the local users and groups-> users

    2. Add the service account to the Administrators group.

    3. then open the SupportAssist console and go to the settings tab and click on systems of credentials.

    • Update the credentials, and then click on save changes.

    4. If there are no errors, the changes will be saved successfully.

    Note: If there was a previous attempt by adding a specific account without first including in the Administrators group, then this account will not be usable without some significant changes. If another account can be used for systems of credentials, please follow the steps above to add this account. Otherwise, we recommend that you submit a ticket and works with the technical support of SupportAssist to solve the problem.

  • Problem with the Toshiba recovery process

    Hi guys,.

    I had some problems with my laptop and decided to return to the factory settings. But during the process, because of a few mistakes that I didn't understand, formatting process was broken and I guess that the recovery in my hard drive section was damaged. So, I could not use boot from the hard drive. Becacuse Toshiba did not give me recovery disk when I bought it, I had to boot the pc with cracked windows. I never use illegal software, but I had to do this temporarily. In any case now Toshiba has sold me an extra price, thank you Toshiba!

    Today, I had the cargo, and Toshiba Turkey sent two recovery disks. In the first disc, there are preinst.swm files under the ZZIMAGES folder. And in the second disc, there are some files named as bin, efi, planfolder, boot, sources etc.

    What should I know? Hot to go back to my original windows? And how can I do a recovery of these two DVD recovery usb drive?

    Thank you, best regards better.

    Any help pls?

Maybe you are looking for

  • I did my first backup right?

    I bought an external hard (Lacie) drive for the first time and I made my fist with time saving machine (macbook pro) which was really a struggle because I don't know anything. I understand not partitions and how to put in place, but looks like he wen

  • Qosmio G30 - screen remains blank

    Pc guru please show me the age of enlightenment: When I turned on the laptop, she had that familiar noise (music) for Window Vista Home Premium in the background and the screen remains blank. I pressed F8 during the newspaper but made no difference (

  • The drivers are all workers, but still no sound with windows 7

    I have a frustrating noise problem. My sound worked completely fine until yesterday. When I start my computer, I realized that no sound came out. I went through many forums to find the solution and I checked all the simple stuff like making sure my d

  • NOR-4351 incorrect Thermocouple readings

    Had had problems of expierencing with our boards of NOR-4351, we have several and the only work is done without knowing why. I took a Board of Directors and setting up a new system with a new installation of windows XP SP3. I then installed TDAQ744.

  • Quality of the webcam on C720-2848

    The quality of the webcam is not very good for something marketed as having an "HD webcam. It seems pretty grainy, almost as if there is some sort of "oil painting" of the applied filter. There is another user who sees the same topic, see here: http: