Problems with timer

repTimer = new timer (650, pattern.length);

repTimer.start ();
repTimer.addEventListener (TimerEvent.TIMER, chooseColor);

To my knowledge, the above code should run chooseColor all ms 650 as many times as the items in the configuration table.

private var: delay timer = new Timer (650, 1);

public void chooseColor(evt:TimerEvent):void
{
for (var x: Number = 0; x)<>
{
If (model [x] == 0)
{
red.setImage (new red1());
Delay.Start ();
delay.addEventListener (TimerEvent.TIMER, Redoute);
}
If (model [x] == 1)
{
blue.setImage (new blue1());
Delay.Start ();
delay.addEventListener (TimerEvent.TIMER, blueOut);
}

}

}

And that the code should go in the table of the model and when the value is 0 or 1, set the image and then run redOut/blueOut all 650 ms.

Essentially what this should do changes an image every 650 ms according to the values stored in the table model.

However, it seems to make them all at once, can any1 point out what I'm doing wrong here?

I don't quite understand what you're trying to do, but here's something that can help:

You create a single instance of "delayed".  So whenever repTimer fires (and note that you asked so that he can produce a total of events "pattern.length"), you run through the loop times "pattern.length", and for each passage, you ask that the self-timer starts.

You also add an event listener each time through, although I think adding the same listener for the event even more than once done anything.  However, this means that as soon as you saw the two modes 0 and 1, you will have a timer with two attached headphones.  All triggering events will trigger redOut both blueOut at that time.

Also, I do not know the behavior of a timer that is already over, but it is possible call. start() on it again will simply trigger the TIMER event once more, immediately.  Or maybe it does nothing.  It seems to be undefined behaviors, based on reading the documentation.  It is certainly not what you want...

You may want to create a new instance of the timer of delay for each pass through the loop.

Tags: BlackBerry Developers

Similar Questions

  • Problems with Time Capsule

    I have problems with our time Capsule. My husband and I have Macbook Pro (from 2012). We use a Time Capsule as our backup disk but not our wireless router (we use the router provided by our internet service provider). We have configured like this for over a year and it is usually worked fine. In the last month, we had problems with backups does not happen. Currently, computer of my husband has saved in about 2 weeks, and mine has not backed up in 2 days.

    It seems that our computers lose their link with time capsule. If I go to the finder, the shared drive appears under "shared", but if I click on it to connect I get a message that says "connection failed." Airport utility shows the time Capsule but has a yellow triangle next to it that says "device not found."

    If I unplug the Time Capsule and plug it in again, it reconnects. I did this earlier this evening and was able to access the shared drive and make a return to the top. But a few hours later, this subject has disappeared again. I tried to do this same thing - unplug, get the rear connection, only to lose it again a little later. Any thoughts on what could be the problem? The Capsule was bought the same time than computers.

    I guess what surprises me is that you had no problems up to this point.

    Your computer must connect directly to the Treasury Board. Ethernet or wireless... It will break things especially in the BONES later if you do not.

    Do you have recently move you to el capo... ?? That could have triggered the problem.

    I lost the link but in apple of one document stated finally that you connect directly the computer now... because of the bad DNS in the operating system.

    If I unplug the Time Capsule and plug it in again, it reconnects. I did this earlier this evening and was able to access the shared drive and make a return to the top.

    That's why you get this nonsense. He is able to find the backup if DNS is renewed due to reset... After a few hours it is lost again.

    What operating system do you use?

    My recommendation is to put on wireless and a link to the direct of TC...

    A TC Gen4 purchased in 2012 is now at least 3 years and let me tell also your reliable stage... you are now at the stage of growing decrepitude of old people. It might work correctly for a year or two... It can suddenly die tomorrow... but more likely will fade into the sunset.

  • Problem with Time Machine

    Of course, I don't know how time Machine works. I got a 1 TB drive connected to my iMac as I have owned and have never had a problem of backup. Now, I get a warning that says that there is not enough space on my 1 TB drive to back up a computer with, in total, less than 500 GB of information on it. It makes no sense at all. How a 1 TB drive can not have enough space to back up a computer with the hard drive has only about 480 GB of stuff on it?

    And what do I do to fix this? Thank you.

    ...

  • problem with timer elapsed sub vi - given RPM

    I'm trying to find the rpm of a motor using a proximity detector connected to my cRIO-9012, 9205 module.  I am using the timer has elapsed in order to find the time between two pulses of the prox sensor under vi.  My problem is it seems to reset whenever there is a pulse, sometimes only.  The pulse is Boolean and is connected to the Terminal to reset the timer has elapsed.  The impulses occur quickly, perhaps about a tenth of a second, and yet the elapsed timer gets up to a second or more before it resets.

    Can someone help me out here? I'm a bit new to Labview and am struggling to learn the tricks of the FPGA.  I have thermocouples working, but can't run RPM.  If anyone can think of a better way to find the RPM, any help is welcome.  Please take a look at my code and tell me if I do something wrong for the use of FPGA.

    Thank you!

    Hello Ryan,

    I think you may have a look at the following link is an example of tachometer implemented on a cRIO with Labview FPGA http://zone.ni.com/devzone/cda/epd/p/id/2326. The example is configured with a NI 9234, but you should be able to use your 9205 as an alternative to this module.

    Kind regards

    Blayne Kettlewell

    The ELP engineer

    National Instruments

  • Problem with timer and Reset. Help please :(

    Hello everyone, I have a big problem when I put a button to reset my program. In addition, from the time of my game.

    I am doing a project named "Simonsays" which consists of a sequence of colors that you need to remember and must click on each color to pass the level.

    The problem is that I do a clock or a counter to count the time of a game. For example when I press "start" the beginning of time, and when I make a mistake in the game time must stop. There is another button named "New Game" or "Nuevo Juego" which is used to 'RESET' of the game, but I can't this is the button used to RESET.

    The game starts when you press "COMENZAR" and labview window disappears, then you will need to click on "START" and the game begins... BUT when you make a mistake, the game must be stopped with the TIME that you make throughout the game, and the game must wait until you press "NEW GAME" and newly him game begins with a new counter of the time.

    I hope you can help me. Please, I beg you.

    There are 3 files, because the files are connected.

    Thank you.

    I think I've answered before?

  • Problem with time control on the storm 9530

    My app has a control object of time allowing the user to change the hour and minutes.

    When the control is clicked, it opens the window with the hour and minute.

    the problem reported by the user, is that they cannot select the OK button or cancel.

    I tested the application on the SIM 9530 and it works fine.

    someone knows why?

    the user has actually sent me a video of the problem.

    I asked him to turn compatibility mode, but it did not help.

    Finally, it's a soft reset and now he said he's working.

    don't know why, but I'm glad that's not my application

  • Problems with time

    I worked on a project and it's just been my kicking back. Here it is in it is made current.

    <? XML version = "1.0" encoding = "utf-8"? >
    "" < mx:Application xmlns:mx = ' http://www.adobe.com/2006/mxml ' layout = "absolute" width = "100%" viewSourceURL = "srcview/index.html" height = "100%"
    Initialize = "getDaysUntil ()" > "
    < mx:Style source = "source.css" / >
    "< mx:Image source="@Embed('.. / images/title.jpg') "width ="210"height ="65"top ="4"left ="15"/ >
    "< mx:Image source="@Embed('.. / images/title1.jpg') "id ="image1"horizontalAlign ="right"verticalAlign ="top"right ="0"scaleContent ="true"y ="0"/ >
    "" < mx:XML id = "tempXML" source = " http://mysite.net/interface.php?username=admin & amp; password pass & amp; customer = 63 & amp; actio n = showopen & amp; operation = defects & amp; format = xml and amp; critcal = both ' / >


    < mx:TileList
    dataProvider = "{tempXML.defect.asset}" "
    width = "100%" backgroundColor = "#000000" color = "#ff0000" fontSize = "27" borderColor = "#000000" columnWidth = "300" rowHeight = "50" themeColor = "#808080" fontWeight = "bold" = "true" height = '496' allowMultipleSelection '28' red = horizontalCenter = "-1" / >
    < mx:XMLListCollection id = source = "{tempXML.defect"defectXMLList"}" / > "

    < mx:Script >
    <! [CDATA]


    private function getDaysUntil (): void {}
    creates a new timer 5 minutes
    var minuteTimer:Timer = new Timer(1000, 300);

    designates earphones for the period of integration and completion events
    minuteTimer.addEventListener (TimerEvent.TIMER, __ontick__);
    minuteTimer.addEventListener (TimerEvent.TIMER_COMPLETE, onTimerComplete);

    starts the timer ticking
    minuteTimer.start ();

    }

    public void onTick(evt:TimerEvent):void
    {
    shows the number of cycles until now
    The goal of this event is the Timer instance itself.
    trace ("Seconds Left" + evt.target.lblTimeUntil.text);
    }

    public void onTimerComplete(evt:TimerEvent):void
    {
    trace ("Time Up!");
    var minuteTimer:Timer = evt.target as timer;
    minuteTimer.reset ();
    minuteTimer.start ();
    }
    []] >
    < / mx:Script >

    < mx:HBox horizontalGap = "4" x = "400" y = "500" >

    < / mx:HBox >
    < mx:Label id = "lblTimeUntilRefresh" text = "time until what Refresh" color = 'red' fontSize = fontWeight '19' 'fat' = x '387' = y = "500" / >
    < mx:Label id = "lblTimeUntil" color = "red" fontSize = "22" fontWeight = "bold" ToolTip = "Current Time Left" x = "200" = "500" fontFamily = "Arial" / >
    < / mx:Application >

    The problem that I am running is that everything in flex says it's fine but when I go to test the flash completely flexible player and comes up with the following error.

    ReferenceError: Error #1069: property not found on flash.utils.Timer lblTimeUntil and there is no default value.
    to Red_Board / __ontick__ () [C:\Documents and Marc Documents\Flex Builder 3\Red_Board\src\Red_Board.mxml:36]
    at flash.utils::Timer/_timerDispatch()
    at flash.utils::Timer/tick()

    Who sets the shot to the top, but the point of this is to make the time does not count toward the top. Also is there a way for it to format in minutes and seconds?

  • Problem with time parameter values Run

    Hi all
    Am facing an error loading 11.5.10 EBS financials. Problem is that my settings in the SQL qualifier (run time parameters in the SQL query) were not replaced with values appropriate for execution. What is happening for the task "SDE_ORA_Reverse_GLJournals_ImportReference_Extract" that have the SQL query in mapplet "mplt_BC_ORA_XactsimpGlrfExtract."
    I checked in the settings file and have values for the parameters of race time. For some reason, these values were not be picked up by this SQL query.
    Can someboday help me about this possible issue or the reasons behind all this?

    Hello useroo7, if I understand correctly (you run FA), then the you listed above is not FA. So I suggest, you can check SAs added to your EP I hope this helps.

  • Graphic problem with time axis in WPF

    I am new to use measurement studio.

    I used the rangeadjusters in the examples, followed messages in this discussion and put some my own codes trying to make the graph having a time axis.

    but now I'm stuck in a problem. Here there.

    There are students that I added;

    In the xmal part:


       


               
         

       
               
       

       
                 
         


     
           
               
                     
                 

           

     

    c# rolled in OnPlotDataClicked codes

    AnalogWaveform[vague];
    Double [,] plotData = new double [3, DataCount];

    for (int j = 0; j)< 3;="">
    {

    for (int i = 0; i)< datacount;="">
    {
    Double value = 1.2 * random. NextDouble() * Math.Sin (I * Math.PI * Math.PI/DataCount);

    plotData [j, I] = value;
    }
    }

    waves = AnalogWaveform. FromArray2D (plotData);

    for (int k = 0; k)< 3;="">
    {

    Calendar of WaveformTiming = WaveformTiming.CreateWithRegularInterval (new TimeSpan (0, 0, 0, 30), DateTime.Now);

    waves [k]. Timing = calendar;

    }

    Graph DataSource = waves;

    the result

    but the result is not that I want to, axis show the wrong date at any time. How to make right. waiting for your help, thank you very much

    By default, the PreferIndexData property true for the Graph control. This means that the chart uses the index values of the wave instead of calendar information and then converts the index values for DateTime to match the axis (so index 0 forced to ' 1 1 January 00 ').

    We have a task to improve this problem, but for now, if you set PreferIndexData to false , the chart will use the time information and update of the axis interval to match that of the wave.

  • (I hope) Simple problem with time delay

    Hey people,

    I am a neophyte of labview and I have a program (see table) on the screen I use to Flash one of the three signs a pressure switch is released. There is a detection device of time between the pressure switch (run through a data acquisition) and the flashing of the sign on the screen; However, when I use a nonzero value for the delay, the acquisition of data appears to trigger after a variable duration after the button is released, and THEN the delay occurs. If I don't use any delay, acquiring data reliable triggers immediately after the switch is released (and therefore the sign flashes immediately as well).

    I can't understand why the DAQ does not trigger immediately in all cases, regardless of the value of the elapsed time. The only thing I can think of that could have an impact on is the computer I do turn it through is dated (2 Ghz P4 with 512 MB of RAM), but it's not as if it is a program that is complicated... Please help! Thank you!

    The stacked sequence right click and "replace with flat sequence. The flat sequence right click and 'delete the sequence '.

    You have a race condition between val Trig and local of it. Wire directly to the loop to make sure that it is this happening val trig that you use and not the previous races.

    /Y

  • T60p - problem with time

    Hello

    I'm at the right time every day or two days. It's out for 100 and more.

    Which can be a problem?

    XP and all updates FRO Lenovo and made MS.

    Thank you

    SM

    Here's the HMM for your machine:

    http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=MIGR-66958

    All the instructions and the applicable reference numbers are there...

    I hope this helps.

  • I have a problem with time limits in Parental control.

    Original title: Parental controls: time/blocks. How it works once defined?

    I just put a few times on our computer that I DON'T want my child to be on the computer.  If my child is connected when the window of blocked time arrives, what happens?  It hits them?  Only apply it is able to connect at this time?  Will get a warning that they're about to be disconnected?

    Hi trossk,

    You can set time limits to control when children are allowed to log on to the computer. Time limits prevent children to connect during the specified hours. You can set the hours of different logon for each day of the week. If they are connected end their time, they will be automatically disconnected. For more information, see control when children can use the computer.

    Reference:

    What can I control with Parental controls?

    http://Windows.Microsoft.com/en-us/Windows7/what-can-i-control-with-parental-controls

    Choose which games children can play

    http://Windows.Microsoft.com/en-us/Windows7/choose-which-games-children-can-play

    Video: Use Parental controls

    http://Windows.Microsoft.com/en-us/Windows7/help/videos/using-parental-controls

    Hope this information helps. Get back to us if you have more queries about Windows.

  • problem with time

    Im having bad to change my time on computer do not know what settings to put on

    http://www.helpwithpcs.com/TipsandTricks/change-date-time-Windows-XP.htm

  • Strange problem with time of BIOS

    Today, I tried to create a new virtual machine and I was wondering why a Windows unattended Setup no longer works. I discovered that this was due to the Kerberos failure as a consequece of time inaccurate system.

    Then I boot in the BIOS of VMs and found that the time is one hour on local time and also a time out of time that is displayed in vSphere client for the ESXi host.

    It worked perfectly, in the past, there is no need to adjust the time of BIOS after creating a new virtual machine.

    No idea why the BIOS of the newly created virtual machine time is an hour off the coast compared to local time?

    Thank you.

    See you soon.

    Time UTC in the BIOS at startup.

  • Cannot view or connect to the Wifi network of 5 GHz with Time Capsule from Apple 5th generation

    I have a new Apple Time Capsule 2 TB with 802.11ac network support. I have setup my base station in order to disseminate the 2.4 GHz and 5 GHz network SSID. I have 2 apple (iPad Mini and Macbook Pro) time devices can see and connect to Terminal 5 GHz network however I have also a Lenovo Vibe P1 phone (dual band wifi supported) and Samsung Galaxy Tab S compressed (dual band wifi supported) and these devices cannot see or connect to the network of 5 GHz of Base Station. I also have a Cisco router that has a dual-band support and all my devices can see and connect to the network of 5 GHz of this router.  So I wonder why I have this problem with time capsule?

    I have reset my base twice station and it is a new device purchased last month.

    Any help or suggestion is appreciated.

    Did you use the SMB compatible names for everything...?

    That is to say the alphanumeric short, without spaces and Pure...

    for example base station name... TCgen5

    name TCwifi wireless

    Have you also used the password corresponding to these requirements... but can be between 8 and 20 characters.

    If so, then you must give a different name to 5 GHz and delete the password and test... If it's not yet connect the test manually on channels 36, 44, and 149 for example if you are in the USA...

Maybe you are looking for

  • 210 - 4004tu I need ram upgrade. Cannot open the hood, nothing to push. How to open?

    210 - 4004TU Ii need to upgrade RAM. I can't open the lid. After removing the battery, I see nothing to push or pull. How to open the lid?

  • 16 GB to WIFI?

    What means of 16 GB WIFI? and the Malaysia have the 3G version or not? When Sony will come out there?

  • May 2nd Gen Moto G load wireless with QI?

    Hi all Just bought this phone to the United Kingdom. I have not really yet unfortunately but its on its way. Can someone please tell me if this phone supports (QI) Wireless charging? Currently use QI on my nexus products and love it. I also saw that

  • D20 + SATA ONLY + WINXP SP3 32 BIT

    Hi all Testing a D20 for the company and can not get the D20 to run as a SATA drive only. Currently, its spinning the Marvell controller with a 500 GB drive in. Have tried to get into the BIOS and disable the RAID controller but then I can't use the

  • HP Photosmart C4180 all-in-one: can't print or scan

    When I want to print or scan the message "cannot print or scan" and "Scanner failure" happens...» When I try to print the document will go to half way and then stops, same message arrives... If I want to download and print something good, the printer