Problems with Toshiba HDD Recovery

Hello

A few days ago, I bought a new Toshiba Satellite notebook, everything was going well until I started to delete or disable the programs that have been added automatically with Windows 7 Home Premium 64 bit on the HARD drive,
because for me, most of them is really unnecessary and everytime when I checked the Task Manager it had before any process of more than 80.
If everything seemed great until I rebooted the computer, after that there wasn't one more chance to log in windows, I tried several times, but without effect, even I tried via safe mode.
It seemed like they were reduced.
So I decided I will upload I want to install the new Windows 7 different version on the HARD drive, without thinking that he might restart former.
and the problem started here because the hardware does not recognize the new version of Windows, I have all the drivers, I tried to download and add them, but did not work.
Even Device Manager does not properly because it does not show same me I have the graphics card ATI, network card...

I know I reacted stupidly, but is there a possibility that I can reboot, reinstall the old primary windows again, because I didn't erase them or I na not format the HDD but I installed the new version on
One older so that they are still in place on the HARD drive, but under another brand windows.old.
I also have on the other HARD drive recovery partition, or it's just better to him distribute service where they can solve the problem.
If you have any tips or advice please tell me!

Thanks for your response

AL

Oh AL what are you doing man. I mean why do you all this?
The first step, you must do it with the new device is to check the s manuals and pick up some info about your new product.

In this manual is clearly described that original recovery image is saved on the HARD drive and very important, is to create recovery DVD that you can use in the case if the HDD recovery procedure will not longer work.

So what you have now?
-screwed to the top of operating system
-Nothing in the hand who can help you with recovery of OS install

Only thing you can try now is to start HARD drive recovery in the hope that everything will work OK.
Here the instructions how to do this > http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

If this does not work, you have a big problem.
Anyway send comments and let's see what you can do as the next step.

Tags: Toshiba

Similar Questions

  • Do not have "Toshiba HDD Recovery" on Satellite U300-151 with Vista

    I have problem with Vista - it became too slow so I want to get back to factory settings.

    I went through the process described in [http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm] and then, instead of "Toshiba HDD recovery" as a last option-, I have 'Restore the full Windows operating system' which is the last one after 'comand prompt. When I click on that I get another box with warning by saying "when you reinstall windows OS reformats the hard drive and all data will be lost" and "If the preinstalled files are damaged you can use the product recovery disc (which I don't have)" and there are no other or any button except OK which I click and it just brings back me to the list "System Recovery Option"...

    I have Toshiba recovery disc creator no - it was not pre-installed when I bought computer - even if I had all the other software from toshiba.

    And I know that I can buy the recovery disk, but I don't think that pay 30 dollars for something that I should have had with the computer: and my computer is still under warranty.

    Delivered using the recovery media, you will be able to install Vista.
    Recovery image contains all of the drivers, tools and utilities, and after the installation of clean operating system, you should not install some additional software.

    Bye and good luck!

  • Vista recovery disks do not display TOSHIBA HDD Recovery option

    Back to school for 4 children with laptops is a pain, he seems to be constantly before wipe them and their establishment again.

    Any ideas why the Vista recovery disks do not display TOSHIBA HARD drive recovery option?

    I made a USB key and copied all the files from a backup of the Recvery drive to it. The USB displays the TOSHIBA HDD Recovery option but calls for the disks and will not run the recovery of the USB itself. It's annoying, but at least I can still use it to recover the machine.

    I would like to be

    the problem with discs

    or

    get the USB key to retrieve by using its own files instead of asking for the disks. Vista was not created with the option to recover from USB, so maybe I can't.

    HARD drive recovery option appears not in the advanced boot menu if something has been changed or modified on the HARD disk and the flag was removed.
    For example, this may be the case if the partition has been changed, modified or if HARD drive recovery files or folder has been changed, moved, or deleted.

    In case you want to recover the computer laptop back to factory settings, you must use the recovery disk

  • Need TOSHIBA Recovery Wizard, but have simply on TOSHIBA HDD Recovery Tool

    Hello world!

    I bought Windows 7 Home Premium OEM SP - 1 preinstaled in Turkey with model Sattelit L675-10z. Corsica, is in Turkish,

    And as I am not Turkish I wanted to find a way to use it in Russian. Toshiba supports service in Turkey told me that they cannot help me with this, so I have instoled program Vistalizator with the Russian language.

    It has been activated Windows without problem and just "authenticity windows 7" were not working. But I had the opportunity to download all the files to update windows without notifications.

    After 6 months of work, my child is delited some .dll files that I understood and also he deleted all the windows recovery points to sistem windows recovery.

    And when I tried to use toshiba HARD drive recovery, I was surprised. Before I got the toshiba laptop with windows 7 (also satelit L series) and it was easy to recover, but http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm I'm shoked. When I try to push button 8 in the bios I have not any TOSHIBA Recovery Wizard... .i have just TOSHIBA HDD Recovery Tool the same situation with button 'Zero' in the BIOS.

    Toshiba Recovery tool do not give me a chance to recover windows fair he also wants to erase all my files in all drives.

    I have also done with Toshiba Recovery Media creator usb charger and you have find it also gives me opportunity just to clear all my files in all computers.

    but I also find there a file setenv.ini with the following parameters.
    [Commune]
    Packer = ImageX
    InstallCMD = \inst.cmd
    FactoryInstallCMD = \facinst.cmd
    PartitionSizeGB =-1
    MinPartitionSizeGB = 15
    DefaultGUILang = English
    NumLang = 1
    Hnum = R13026TE
    [Lang1]
    Lang = TRK
    OS = Windows Win 7
    ImageName = 11898XSP.swm
    ImageIndex = 2
    WinREIndex = 1
    FS = NTFS
    StartMedium = 1

    and 2 files with name boot.wim so I think I can install windows 7 without erasing all my records? and there is also possibility to choose the language?

    Or maybe I should ask toshiba company servise on help?

    Have no idea what to do. Do not want to pay for another license, do not want to lose all my files, and want to use lisansed BONE in my native language or in English.

    Or if that's not possible, I would like to get the Turkish version of windows.

    Thank you
    Natalya

    Hello Natalya

    First some facts for you. I hope that this will help you understand some important things.
    Computers notebooks are specific products of countries and every laptop on the Turkish market is actually for people who use Turk language. In other words, they will get operating system and keyboard for that language.

    Each book is available for some countries of preinstalled language and there is no way to activate a different language. If you live in Russia and use the Russian language you should get Windows7 on your language and install it on your laptop. All the necessary drivers tools and utilities can be downloaded from the Toshiba support page. Of course, to the clean OS install, you must pay for the license of Microsoft. The button down belongs to the original version (Turkish language).

    When you install the operating system using the recovery image of HARD drive you Turk language again and the problem is not solved for you. In my opinion you n t to use this image at all. You can't choose your Russian language and, in general, this recovery mage Turk is useless for you.

    My advice to you if you want to keep this notebook:
    -change the keyboard (Russian language) the nearest Toshiba service for help. they can order and exchange it for you
    -installation disk install Win7 using Microsoft original (Win7)
    -install all the necessary drivers, tools and utilities from Toshiba download page the link is on this forum page (support Top sites)

    Please read all this and let me know if you have any other questions.

  • Problem with Toshiba Power Saver Tecra S1

    Hello

    I have problem with Toshiba Power Saver (GST).
    I installed SP2 on my WinXP Pro, and after this operation, all works well. After a few days GST on icon disappear from the task bar. When I open the Console from Toshiba, then GST I can see only incomlete standard dialog box. There is no configuration icons, but initially were, and I set all the settings. Now, there are 4 black boxes (2 small as a small icon) and 2 large as icon bigest at the bottom and a large black on the right.
    I try to reinstal GST, but it had no effect.

    Can someone help me

    Alex

    Hello Alex

    I have never seen anything like it. There is obviously some problems that doesn t allow the graphic illustration of the ATP. The first step is always reinstalling the software. I don't know what you need to do exactly. In my opinion, you should try to remove the GST and SP2. Install SP2 again and after this GST.

    If there is not the worst success solutions are preinstall the device using the recovery CD.

  • NB550D - can't find Toshiba HDD recovery software

    Hello

    Several days ago, I bought a Toshiba NB550D netbook. He had Windows Starter pre-installed, but I wanted to try Linux. I installed Linux and, of course, left the recovery partition. Now, I would return for Windows.

    I would like to restore the software preinstalled on the hard drive, but I can't find the disk recovery software HARD Toshiba which could install on a newly installed Windows and restore the system from the hard drive. Where can I find it?

    I have a whole score necessary for recovery, nothing moves or deleted.

    Enormously grateful for the help
    Toshiba NB550D user

    Hello

    Toshiba HDD recovery software can be launched via the advanced version preinstalled Windows boot menu. In other words, this feature works with OS preinstalled only.

    Now you have installed another OS (Linux) and this means that you can start t HARD drive recovery option more. HARD drive recovery partition is not enough to do.

    Have you created a bootable USB key using the recovery media creator before installing Linux? If so, you can use this stick now to restore the original settings. If you don t have that stick you can order recovery media here:
    https://backupmedia.Toshiba.EU/landing.aspx

  • Satellite L650-12 q - Toshiba HDD Recovery does not

    Toshiba Satellite L650-12 q
    Windows 7 64 bit

    I am looking to re - install Windows using the Toshiba HDD Recovery software on my hard drive to restore the computer to factory settings.
    I followed the procedure to do this in the System Recovery Options, but received the following message is displayed:

    "The recovery of the operating system is impossible!
    Not found the HDD Recovery folder on the second disc of the first hard drive. There is no valid disk HARD recovery environment on this computer. »

    More details:
    Before you do the above, I supported the system and the files and folders using AOMEI Backupper. I then made the mistake of the merger of C: D: and E: partitions, E: contained HDDR files.

    After having tried the recovery above and receive the above message, I reinstalled the file system I had saved on an external hard drive, which resulted in a copy of the drive C: and E: drive with HDDR files.
    Unfortunately, when I tried to recover the operating system, the same message appeared.

    Then I tried to use a system restore disc, I had created a few weeks ago, but concluded that, for some reason that CD is empty.

    The good news is that the computer still works - slowly - and HDDR files seem to be still there, but for some reason, inaccessible.

    What are my options? I want to go back to initial factory settings so that I can go back and re-install the programs and files that I want to. (I backed up all my files and have records of installation for programs).

    If the worst comes to the worst and I have to buy a Windows 7 disc (if that's even possible - I don't want Windows 8), it would be possible to install on this computer and it would give me a clean install, without any of the garbage which is currently cluttering up my computer?

    Thank you for reading, and I would be grateful for any advice you can offer.

    In your case, the situation is clear: HARD drive recovery facility does not work?
    If you want to have the laptop with the settings you have an option only: for recovery image installation you must use the installation of recovery disc.

    If I understand right you don t, entitled?
    But you can order it on https://backupmedia.toshiba.eu/landing.aspx

    If you have any other questions do not hesitate to ask.

  • HowTO: Toshiba HDD Recovery after the new installation of Windows 7

    If you install a new windows format or toshiba by a cd of windows you will not be able to see the Toshiba Hdd Recovery on F8 to restore the menu.

    Like this

    So if you have a recovery partition, you can make a recovery system to factory default. Follow these steps...

    1. format your USB key. Paste that file to a usb flash drive.

    2 - reboot the system and press F12 to start from usb...

    After these steps you can restore the system to factory default...

    Toshiba recovery steps

    Thanks for your interesting ad.
    I m very interested in how it works and will try to test it soon.

  • Satellite L550D I do not see the "Toshiba HDD Recovery"

    Hello

    I was going to use the disk HARD recovery described here link: http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm when you try I don't see why the "Toshiba HDD Recovery"?

    Hey Buddy,

    You have installed another operating system or is still the preinstalled Windows 7 in Toshiba original?

  • Problems with Toshiba Flash cards

    I have problems with toshiba flash Cards on my desk and stay there.  It says flash cards, not reponding, but I can't get rid of it.  This utility is really necessary to make my computer work correctly?  How can I get it out of my office?

    Hi Bklawinsky,

    ·         Did you do changes on the computer before the show?

    ·         The other device USB (Universal Serial Bus) have recognized?

    Follow the suggestions below for a possible solution:

    Method 1: You will need to check the updated version of the utility of flash cards on the site of Toshiba, if found, install and check if the problem persists.

    Method 2: If you can't find any update of the utility so I would suggest that you uninstall using programs and features, reinstall it later using the Toshiba website, according to your model number of the computer to download the utility below.

    Uninstall or change a program

    http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

     

    Toshiba downloads

    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

    Let us know if that helps.

  • I have a problem with my HDD to fill without no reason.

    I have a problem with my HDD to fill without no reason.  I should have about 340 GB free and it reads now only 18 GB free.  Can I have found the culprit (Revo Uninstaller Pro) because he stop to fill in after I removed it.  I can't find where all the "whatever" went.  I don't see anything funny in the registry and cannot find the strange files on the C drive under computer.  I wouldn't mess with the registry too but I as I am limited in my understanding of what's there.  I scanned the hard drive with my Avast Anti Virus and the Microsoft Emergency scan engine and found nothing.  If someone could give me an idea of what happened and how to get my rear disc space, I would be grateful.

    Avoid Revo Uninstaller Pro software type (including the registry cleaners "" and system optimizer).
    Programs and features does the job quite well.
    -There is no advantage to playing in the registry.

    -First run Disk Cleanup defragment the HARD disk in order to have a 'clean' basis of work form.

    -Treesize will show exactly what is there and how much of it.
    http://www.Jam-software.com/treesize_free/

    -Check how much space is used by System Restore.
    Restoration of the system- How do I

    -Indexing research is supposed to implement a very large file as well. You can limit where it indexes
    or turn it off completely in - Control Panel > Indexing Options
    -Check there is no software constantly writing/rewriting something. These activities have
    view in Task Manager-process.

    -Have another look through programs and features and see if there is has than nothing installed, you
    do not use or need and to uninstall, but software doesn't generally use a lot of space.

    .

  • Satellite T130 - cannot start the Toshiba HDD recovery

    Hi all, I have a problem with my Satellite T130. I have to start the drive HARD Toshiba recovery but the computer tell me that is not a valid drive HARD recovery on the PC. It's probably a fault of my father. Is there another way to start the recovery?

    Thank you

    Hey Buddy,

    How are you trying to start the HARD drive recovery process?

    The full HARD drive recovery procedure is described here, so please check this article:
    http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htm

    If it doesn't work your only option, you use the recovery media. Did you create this such as described in the user manual?

  • TECRA A10 - 11 M - problem with TOSHIBA accessibility

    Hello to the forum.
    I have a TECRA A10 - 11 M (a Greek market system) and after I faced many problems with Windows VISTA
    I installed with Windows XP Professional, the legendary Microsoft OS recovery CD.
    Here I have faced a problem with my buttons of accessibility. My function keys do not work!
    The message is: this system cannot be used "TOSHIBA accessibility.
    I uninstalled and installed again the feature, but nothing happened.
    Y at - it a program known that affect my system and prohibits any accessibility to work properly?
    Can anyone help with this?

    Thank you in advance,
    Vassilis

    _ @ dvass66_
    The FN keys need to installation of common Modules and Hotkey utilities for display devices.
    Common modules must be installed first!
    Also I recommend the update to the BIOS too

    _@korenisko_
    > I think that problem on this laptop is Wifi Atheros card
    I put t know why you think this, but I put agree t
    I have Atheros WLan card and since I use the latest BIOS and WLan driver everything works perfectly.
    Vista turn too stable, but indeed it needs MS patches and update my Vista updates more than once a week...

  • Problem with Toshiba Stor.E D10, 1 of 5 TB external HARD drive and eSata connector

    Hello

    I have a problem with eSata HARD drive. I have a toshiba Stor.E D10, 1, 5 to external HDD. When I plug it into the connector back eSata, Windows 7 recognize this and I can read it, but when I try to write about it, it freezes and I have to unplug it. When I connect the Toshiba Stor.E D10 with the USB cable, everything works fine. The problem is when I use the eSata connector. I have updated the BIOS to the latest without any improvement. In the BIOS, I tried esata IDE and AHCI controller without success.

    My system: Windows 7 64 bit Ultimate, card mother Gygabyte GA-X58A-UD3R(rev. 2.0)

    Any help is happy.
    Thank you

    Javier,

    Hello

    Did you check and test the drive external DRIVE with other computers that provide the eSATA interface?
    I think that this should be done because theoretically the problem might be related to the laptop s / s computer eSATA port.

  • Problems with my A30 recovery CD

    The recovery came with my laptop CD Act exceptionally. Sometimes, during the reinstallation of the system the CD stops at 60% compleation and shows an error with the operating system file paths much. But I took it to the PC, the person world it does the same thing, but it worked fine.

    I don't think it is a mistake to CD, can I start the laptop a ultimate boot CD, which workes fine.
    The laptop is a Satellite A30 514, and runs Windows XP Home Edition, any help on this will be greatly appreacated.
    Yours, Ewan Douglas :(

    Hello

    Well, you said it happens sometimes. In this case I n t also think that the CD has a failure. This problem sometimes occurs on my laptop. It s not very serious problem. I formatted my HARD drive again, and after this procedure, it worked fine.
    I n t have any explanation why it happens, but the formatting with fdisk HDD should simply fix this strange.

    Good bye

Maybe you are looking for