Problems with two of my OPOS hardware after upgrade from XP to 7

Similar Questions

• 120 all-in-One desire: analysis of the problems with envy 120 all-in-One after upgrading to Mac OS 10.12 (Sierra)?

  Hello world

  My operating system is Mac OS Sierra 10.12, but the drop of HP does not include yet - that's why the "other" operating system.

  I just upgraded my Mac to 10.12 Sierra, and I've also updated software from my desire to 120. I have also reinstalled the HP utility software on my Mac. And Yes, I restarted my Mac several times too.

  Now, the challenges:

  1 120 feel like in his screen it does not find my computer when I try to scan to the computer. As if he cannot see it, even if the two computers and 120 are on the same network. This problem is new and was held just after the upgrade from Mac OS.

  2. Furthermore, when I try to activate the scan on my Mac computer, an error message appears telling me to update my software HP (see screenshot), although I've done.

  If someone had the same problem, and if you have, how you go about it?

  Thank you.

  

  Hello

  HP software full functionality is not yet available for Sierra, as you mentioned the ysstem functioning is not yet.

  You can scan with the application of ICA Apple (Image Capture or sweepers & Scanners), as well as thorugh HP Easy Scan you will experience, however, some issues you described, as this behavior with the scanning of the façade, this is a known issue with the software that should be fully updated for Sierra soon, it should be available soon, assuming that during the next weeks to come...

  You can insall HP Easy Scan 1.6.1 below and check if you are able to scan from it:

  Note: If there is already a HP Easy Scan of a previous version icon in the Applications folder, remove and empty the tash first.

  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/installations/Essentials/HP-easy-scan-1_6_1.pkg

  Then, try to scan using HP Easy Scan and check if it works.

  If the front panel can now list your Mac, it probably, work if not to use the Scan on your Mac software for now.

  Kind regards

  Shloi

• Problem with the mapping of the keyboard after upgrading to Fusion 7

  Hello

  I noticed that the keyboard layout has changed in the comments after the upgrade to VMware Fusion version 6 to version 7, even if nothing has changed in the settings "Region and language" in comments Windows 7.  Keys that have changed are "------' with ' < ' and ' | ' with ' > ' everything is OK. The keyboard is configured in Italian

  All the world has noticed the same problem?

  Have you solved?

  Thanks in advance.

  The problem has been resolved by the technical support of vmware with a workaround. They know that the question on the keys is interchangeable in the VM after upgrade to Fusion 7.

  Their development team is currently working on this issue on the priority. This will be fixed in the next update.

  However, they have a work around for the problem of keyboard. Following the instructions below to map the key manually in VMware Fusion.

  : Note make a note of the interchangeable keys in Windows before you enable the mapping of the keys.

  1. click on VMware Fusion-> preferences-> keyboard & mouse-> mappings of keys

  2. make sure that 'Enable key mappings' is enabled

  3. click on '+' sign at the bottom

  4. press the key that you want to send from the text box Mac keyboard

  5. press the key you want to receive on the VM in text box

  Note: You can also use the combination of change, control, Option, command if necessary.

• Anyone had problem with access to their musical application after upgrade to 9.2.1?

  I upgraded my IPhone 6-9.2.1 - and again, I am sorry that I have improved - lol!

  I am not always able to access my music app now... after pressing the music icon, I get a picture of a lady standing with headphones - can not access my music.

  Someone else has the same problem and if so, were you able to solve?

  Thank you-

  I can access my music, but it crashes after a few moments and let me only access to some songs. Also sync with itunes is broken.

• problem with the files of exported data after conversion from 10.1 to 10.3 OPA OPA

  Hello
  
  If all goes well a relatively simple question
  
  We have recently acquired access to the OPA 10.3
  
  We have previously developed a 10.1 modules which we imported 10.3 using the upgrade features. This one is designed to be an interface from machine to machine and as such is entirely dependent on the Fed data to make decisions, there is no question screens or interviews.
  
  Then, we have tried to import some ".xds" files we had created to 10.1. There are more than 160 of them, including in general more than 120 items of data in each with multiple entities and bodies.
  
  When we import in 10.3 you get an error message which reads:
  
  
  + "System.NullReferenceException: object reference not set to an instance of an object." +
  
  + Oracle.Determinations.Remote2.Util.LegacySessionDataXDSImporter.ReadEntity (XMLStreamReader reader) +.
  
  + Oracle.Determinations.Remote2.Util.LegacySessionDataXDSImporter.ReadSessionData (XMLStreamReader reader) +.
  
  + Oracle.Determinations.Remote2.Util.SessionDataXDSUtils.ImportSession (SessionData sessionData, Rulebase rulebase File xmlFile) +.
  
  at Oracle.Modelling.Debugger.Core.UI.DebuggerRunView.btnImport_Click (Object sender, EventArgs e) + ' + '.
  
  the simple solution is for us to reintroduce the '.xds' files in the debugger, but given that it it took over 2 weeks for our team at the entrance of the '.xds' in the first place, we would obviously like to explore other options first!
  
  Any help or ideas would be greatly appreciated
  
  See you soon
  
  Dave

  Hi Dave,.

  I have this working on the copy of the modules I've had, it's because your entity / relationship public names do not match the .xds, probably because of the upgrade file. I sent you an email on this subject.

• Still having problems with my perpetual license Adobe CS6 after CC

  Hi everyone, I still have problems with my perpetual license Adobe CS6 after upgrade to CC and terminate my subscription. I did it in October, and of course he had regained all my applications CS6, making it unavailable. I was advised to uninstall my Adobe (CS6 and CC) software and then reinstall my CS6 collection here. I did and as it has helped my Photoshop, all my other apps still get the same dialog box, I received before; telling me to renew my subscription to the CC. It will not happen, all I want is work and back collection CS6. Any help would be appreciated.

  After uninistalling cc, you should vacuum by the use of the Adobe Creative Cloud cleaning tool to solve installation problems, restart your computer and then install cs6.

  you might try starting the vacuum now (to clean the cc) after installing cs6 to see if that helps.

  Open your problematic cs6 programs, and then click Help > activate.

• LR and PS will not update 'Download error' 49 customer service contact? anyone had this problem and how to solve? was running windows 8.1 and now running windows 10 but had the same problem with two BONES

  LR and PS will not update 'Download error' 49 customer service contact? anyone had this problem and how to solve? was running windows 8.1 and now running windows 10 but had the same problem with two BONES

  Check your hosts file.  to help with this and more:

  Log, activation, or connection errors. CS5.5 and later, Acrobat DC

• After upgrade from Vista to Windows 7 Ultimate home, no problem connecting to the internet when logged as an administrator, but cannot connect to the internet using the standard account. How to fix this?

  After upgrade from Vista to Windows 7 Ultimate home, no problem connecting to the internet when logged in as an administrator,

  but unable to connect to the internet using the standard account.  I have the latest version of the Solution Explorer.

  How to fix this?

  Glad to hear it.

  If the problem is resolved, mark the message as response, then it'll be useful for people with similar/identical problem.

• Microphone does not work after upgrade from Vista Home Premium to Win 7 Home Basic-Sony Vaio VGN-NS25G

  Microphone does not work after upgrade from Vista Home Premium to win 7 Home Basic Edition. Laptop model Sony Vaio VGN-NS25G, bought in India

  My built-in mic not working anymore after the upgrade from Vista Home Premium to win 7 Home Basic Edition. Model laptop Sony Vaio VGN-NS25G was bought in India. I have taken the loacl Sony Service Center and they said that Windows 7 drivers for the microphone Sony was not yet available. They mentioned that the only way to fix the problem was to upgrade to Vista. Is this true? Where can I get these drivers for the microphone, and they are not available, when will they be available?

  Hello

  Method 1.
  Interestingly, I found the drivers for Windows 7 for this particular model of Vaio. Here is link thye:
  http://www.Sony-Asia.com/support/download/362654/product/VGN-ns25g/sectionfirst?subpage=detail

  I suggest updating all your drivers from the link above and drivers Realtek especially.

  Method 2. Set the default Microphone.

  Once the drivers installed to check if the microphone is the default value, here's how:

  Exercise the functions mentioned below to adjust the Microphone as default:
  1. Click Start and click on Control Panel.
  2. click on sound, then a new window will open.
  3. in the new windows, click on the 'Registration' tab and right click in the window and click Show disabled devices.
  4. now check if the Microphone is listed there and right-click on it and choose activate.
  5. turn highlighted that Microphone and click "set as default".
   
  For more information see the articles below:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
  http://Windows.Microsoft.com/en-us/Windows7/recording-audio-in-sound-recorder-frequently-asked-questions

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Problem with the mouse and the network after the upgrade VMware Tools and hardware to virtual machine

  Hello world...

  I just upgrade my ESX 3.5 servers to vSphere 4.1. All this work is very well with the upgrade right now.

  After that, I tried to mise a niveau of VMware Tools and hardware of VM for my virtual machine and the problems started.

  I tried with two different VM (the two Windows 2003) and the problem appears for the two VM.

  I don't want to test another VM of the different operating system now, I'm afraid to go too far with update of Pentecost the problem I have now.

  I tried two VM to be sure that the problem is not only on a virtual machine.

  First of all, the mouse.

  My mouse has jerky movement. The button works, but sometimes I have to click several times to select what I want.

  I tried to uninstall the mouse in Device Manager and reinstall, but not really Pentecost improvement which (buttons works better, but... not so sure).

  Second problem.

  After you restart the server after VMmware tools and hardware virtual machine, the network link not working anymore.

  When I go to my network card configuration, IP settings are reset in DHCP mode.

  If I go again all my IP settings, Windows says:

  The IP address is hidden from the network and Dial-up connections

  folder because it is not physically in the computer or is a riser

  It does not work. If the same address is assigned to both adapters and

  they become active, only one of them will use this address. This may result

  in the incorrect system configuration. You want to enter a different IP address

  address of this adapter in the list of IP addresses for this card in the list

  Advanced IP address in the dialog box

  If I answer Yes to this, I have to enter a new IP address, and of course, this is not what I want to do.

  If I don't answer, the network working again.

  I think it is a strange message but the work of the vSphere maybe network now.

  Anyone have any idea why my work network and mouse as this upgrade after.

  All other VM that is not upgraded so far works great.

  Thanks in advance...

  (1) make sure that your hardware acceleration is safe enough. I got the upgrade down my hardware acceleration several times already.

  (2) sounds like the new drivers for your NIC cards took over and VMware is basically a new card NETWORK for you. Follow these steps to disable it:

  (a) open a command prompt

  (b) type (without quotes): 'set devmgr_show_nonpresent_devices = 1' and press ENTER.

  (c) type (without the quotes): "start devmgmt.msc"

• strange problem with two Cruzer 32 GB flash drives on XP Pro

  I have two Cruzer 32 GB discs that will not work on a particular PC running XP Pro SP3.

  The readers work in other PC running XP Pro and PC running Windows 7.

  Now, until someone says, "it's obviously a problem with the PC" I have to say that USB Flash drives other works very well in this PC manufacturers, as does my Seagate FreeAgent Go drive (so it is not a question of power).

  Flash only readers who present a problem are the readers of Sandisk.

  When I insert the Cruzer it flashes slowly then after maybe 20 seconds start blinking quickly and continues to do so as long as she remains inserted in the USB. There is no indication on the screen it was inserted - nothing ofering to the media browser, files, etc.

  The drive appears in my computer as drive F removavble, but no file or folder is visible.

  When I go to administrative tools > computer management > disk management, disk is NOT visible, it is not visible as a removable drive.

  In Device Manager it appears as SanDisk Cruzer USB one, using a device driver Microsoft date 01/07/2001.

  I tried to uninstall this device, removing the Cruzer then turn the PC, but when I plug it in there new detects new hardware - Sandisk Cruzer and drive hard, but then says that it can not work properly and invites me to restart the PC. Subsequently, he then returned to the symptoms described above.

  The TWO Sandisk Cruzer 32 GB disks with the same problem.

  Someone at - it any other ideas?

  Thanks pechter!

  Kies was the problem.

  I followed the instructions in this thread http://forums.sandisk.com/t5/All-SanDisk-USB-Flash-Drives/sandisk-cruzer-blade-problem-troubleshooti... and it cures the problem.

  I must point out that it has not affected any other brand of flash drive I've tried, the incompatibility seems to be only between Sandisk Cruzer and Kies, leads me to conclude that this is a problem of Sandisk.

• Problems with two sites; they have worked OK until some time ago.

  (1) a day (there are several versions of FF) Firefox could not load more http://dictionary.reference.com/ (However it still load sister website http://thesaurus.com), so I have to use the IE engine.
  (2) since the last update FF13.0.1, it loads http://www.bloomberg.com/tv/ but LIVE TV does not work (it does not). Again, it works when you turn the engine of IE.
  Just to save time: no cache, cookies or other problems 'cleaning up', I tried all.
  Thank you.

  First of all, try resetting Firefox. Refresh Firefox – reset settings and Add-ons. This simple step will eliminate the many problems in Firefox with just one click.

  A few other basic problems you can try things is the following:
  Run all Windows updates, install all required service packs, etc.

  Updating your graphics driver (Firefox uses the graphics card for rendering and an outdated graphics card driver can cause problems. Update your graphics drivers to use hardware acceleration and WebGL

  Update all of your plugins (Flash, Java, etc.): http://www.mozilla.org/plugincheck/.

  Download and install MalwareBytes Anti-Malware, run a full scan. http://www.malwarebytes.org/. This check allows that there is no virus on your computer, causing problems. You can uninstall this program after having cleaned the infections.

• I'm having a problem with the tabs is not responding after deleting localstore.rdf

  After the 4.0 update b7, I had a problem with my toolbar to reset and (a little), I corrected by deleting localstore.rdf. Now, however, my tabs do not respond when you click them, and Firefox is essentially locked on the first tab ideas?

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).

  • Makes no changes on the start safe mode window.

  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

  Create a new profile as a test to see if your profile is the source of the problems.
  See basic troubleshooting: a new profile

• Dual monitor boot problem with Windows 7 Professional 64 bit after installation of any graphics program like a game.

  I have built this platform with the help of the owner of a store of 4 cumputer teir 2 years ago. We initially put Windows Vista 32 bit on the system to Vista 64 bit unstable atm. For 2 years, the computer worked like a dream. Last week I made a clean wipe of windows vista and windows 7 professional 64-bit installed. The system has two monitors. The primary monitor is a sony bravia with 26 "led and secondary for watching movies is that a 55 '' led Samsung 1080 p 240 Hz. The graphics card is a geforce GTX 295 nividia. It has 12 GB of Ram and the CPU is an i7 965 @3.20.

  The problem I have is this. After the installation of any game average to work with windows 7, the screens to reset their resolutions automatically more than a few times as they are confused. Sometimes, I have to return the screen to its correct resolution after installation in full. Most of the games and then run fine. After installing the game or any game designed for win 7 startup of computers is all messed up for the monitors. After starting hand 26 "sets its resolution and then after about a second 30 pause the computer makes the sound (the double) that it is resolutuons to reset monitor again? After that this second reset about 1-2 minutes the computer is good to go, unless it sets the res evil. The problem is the computer has never done that with vista and it is very annoying say the least. It still freezes the installation of some games. The only way to resolve what I found is the restoration of the system. The computer starts normally and screen ground is defined once she has always been. The only problem is when you install another game, the problem is their new. This problem is worse in some games.

  The latest nvidia drivers have been installed. There is no conflict in the device with the exception of an old printer Manager. The two comes is set to 60 hertz. I searched all over the internet and there seems to be a problem with windows 7 without solution. I am at a loss. Any other information that you need let me know and I'll post it. Thank you!

  Hi ancientone618,

  It sounds almost as if there is a Windows update that is in conflict with your NVIDIA Driver Installer.  I would say to disable automatic updates of Windows to see if it might help:

  http://Windows.Microsoft.com/en-us/Windows7/turn-automatic-updating-on-or-off

  In addition, please see the article with some useful information:

  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Problem with the Arcsoft webcam Companion 4 after the installation of windows 8

  I have VPCCB390X laptop Vaio from Sony. I have upgraded from windows 7 to windows 8. My web cam worked very well after that installation for a day and now its shows an error "the last USB you connected is not recognized or bad boy" and I couldn't find any category of imaging devices in Device Manager. The webcam has become an unknown device. I tried to contact sony and microsoft, but none helped me. Microsoft says that drivers may be incompatible. I checked with the upgrade of Windows 8 assistant, and he noted that the companion of Arcsoft web cam is compatible with Windows 8. I tried to reinstall the software and drivers, but that did not help and the problem persists. Can I have a solution to this?

  Hello

  Check with the Sony Support, their drivers and documentation online and ask for their
  Forums about known problems. BIOS update, chipset of low level drivers and major
  embedded device drivers. If there is no version of Windows 8, try the latest versions of Windows 7.
  Do not forget to ASK Sony Support and in their forums, because there are likely to be known
  questions.

  Sony - Contacts
  http://eSupport.Sony.com/us/Perl/contact-land.pl

  Sony - drivers
  http://eSupport.Sony.com/Perl/select-System.pl

  Sony - Support
  http://eSupport.Sony.com/

  Sony - Forums
  https://Forum.sel.Sony.com/?XID=M:Showcase:eSupport

  ====================================================

  Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
  According to needs). Win + D key calls the office and using Win Key active / disable the Office
  and the splash screen.

  Microsoft - hardware and drivers
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  What happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  ------------------------------------------------------------------------------------------------

  Translate Windows 7 to Windows 8 methods (there is little difference):

  Troubleshoot camera connection
  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-camera-connection-problems

  You probably need to reload the drivers of the device and any camera (general control software
  included with the drivers and installed at the same time).

  Login as an administrator.

  -Free - DriverView utility displays the list of all device drivers currently loaded on your
  System. For each driver in the list, additional useful information is displayed: load address
  of the driver, description, version, product name, company that created the driver, and
  more.
  http://www.NirSoft.NET/utils/DriverView.html

  To check system drivers manufacturer as replacements and camera manufacturer who are most
  current. Control Panel - device - Display Adapter Manager - note the brand and
  fill out the template tab of the driver for your card video - double-click - write down the
  the version information. Now click on UPdate Driver (this can do nothing as MS is far behind
  certification of drivers) - then do a right click - Uninstall - REBOOT it will refresh the driver
  stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if
  3rd party with their own software and drivers and the other main device drivers you
  a.

  Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration), and then
  Site of the manufacturer of the device (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions.
  (Review of the BIOS, Chipset and software updates on the site of the manufacturer of the system while there).

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT
  After each installation.

  Always check in the Device Manager - drivers tab to be sure the version you install
  actually arises. This is because some restore drivers before the most recent is installed
  (particularly that audio drivers) so install a driver - reboot - check is to be sure
  installed and repeat if necessary.

  Repeat BTW to the manufacturers - manufacturers of devices DO WORK DO NOT THEIR SCANNER-
  manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">