Problems with USB devices in Windows XP Mode on Windows 7 Pro

Similar Questions

• Big problems with USB devices

  Since I upgraded to El Capitan I have several, serious problems with USB devices:

  1 USB hard drive: everything by watching a video from an external hard drive, the hard drive will be to disassemble all the minutes, the video will be of course hang and it takes 45-60 seconds until the drive reconnects. I also can not boot from any external hard drive more. Booting from a USB key works fine.

  2. I can't transfer my Sunny BT11 of beam data more. The Sunny Beam is a device that records the data of my photovoltaic plant. The overview of the system he sees when connected via USB, however he is not recognized and so I can't transfer data files. Also, it makes not a difference if it is connected via a USB hub or directly, the two versions do NOT work. In the Finder preferences, all devices are controlled to display on the desktop.

  The two scenarios always perfectly work with my Mac mini that has not been updated and uses Mac OS X 10.10.

  Hello Gulliver,

  It seems that if you live with loss of connection of your USB devices since the installation of Mac OS X 10.11 El Capitan, is that correct?

  I suggest that you are troubleshooting by following the steps in this article - OS X El Capitan: If a USB device does not work

  Thank you for using communities of Apple Support.

  Sincerely.

• Problem with USB HUB using Windows 7 on Bootcamp

  I have an iMac when I installed Win 7 with Bootcamp. I have problem with USB hub. If I connect USB devices (printer, iphone... etc...) directly to my computer, it works without any problem. But if I connect them through USB hub, that they do not work properly. The sound instantly invites you, but certain peripheral functions partially and some not at all. I tried several USB hubs... same problem for all. Any solution? Thanks a lot for your answer.

  Hello

  I suggest you to see link and check.

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  I also suggest you to contact the apple support and check.

  http://www.Apple.com/support/

• problem with USB driver in windows 8

  I use winsows 8 in hp probook 4440 s with processor i3.  Recently I have a problem with my usb ports 3. they do not react like usb 3 and most of the time does not at all. I looked for a host controller driver expandable usb 3 for windows 8, but can't find anywhere because it is built with windows 8. Where can I find the driver or what can I do now?

  Hello

  Check with HP Support, their drivers and documentation online and ask in their forums
  on known problems. The drivers are from HP. update the BIOS, chipset and the major
  device drivers embedded and separate that may affect the USB.

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ====================================================

  Update driver and troubleshooting details (don't forget to check for BIOS, chipset,

  (and other drivers):

  Microsoft - hardware and drivers
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  What happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  Check with the manufacturer of system (manufacturer of motherboard for customized systems) updated
  the BIOS, chipset of low level driversand the major device on-board and separate
  drivers. Execute DriverView - value VIEW drivers Microsoft hide - updated from those
  without drain to their name.

  -Free - DriverView utility displays the list of all device drivers currently loaded on your
  System. For each driver in the list, additional useful information is displayed: load address
  of the driver, description, version, product name, company that created the driver, and
  more.
  http://www.NirSoft.NET/utils/DriverView.html

  To check system drivers manufacturer as replacements and camera manufacturer who are most
  current. Control Panel - device - Display Adapter Manager - note the brand and
  fill out the template tab of the driver for your card video - double-click - write down the
  the version information. Now click on UPdate Driver (this can do nothing as MS is far behind
  certification of drivers) - then do a right click - Uninstall - REBOOT it will refresh the driver
  stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if
  3rd party with their own software and drivers and the other main device drivers you
  a.

  Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration), and then
  Site of the manufacturer of the device (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions.
  (Review of the BIOS, Chipset and software updates on the site of the manufacturer of the system while there).

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT
  After each installation.

  Always check in the Device Manager - drivers tab to be sure the version you install
  actually arises. This is because some restore drivers before the most recent is installed
  (particularly that audio drivers) so install a driver - reboot - check is to be sure
  installed and repeat if necessary.

  Repeat BTW to the manufacturers - manufacturers of devices DO WORK DO NOT THEIR SCANNER-
  manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Problem with the reinstallation of Windows XP Pro

  A few days ago my Windows XP Pro showed an error at startup, which has declared "activation failed". I have been using the computer for several years. I installed my XP disk to recover the system. After several hours (overnight), he continued to show "Please wait".

  I decided to reinstall windows, it showed that I loose all my data, so I copied them to another drive, and then run to install windows in a different directory (C:\Windows2). I also used a newspaper different name in order to keep my files intact.

  Then, I decided to install windows on "C:\windows" with another in log.

  I now have a selection of dual-boot. One for windows and one for windows2 (show 'Windows XP Pro').

  My question is how I can remove the dual boot. I also need to eliminate some of the user data files.

  Then use msconfig to remove the entry from the start for windows2 installation menu and then delete the folder for windows2

• Problem with USB 3.0 Windows.

  hope someone can help here... I am running vista ultimate 32 bit, I have a VIA USB 3.0 4 port internal pluged into my PCI-e slot card now under win 7 cards worked very well decided to have a play around with vista for a while and I can't do work I'm running the updated driver of VIA that is ver 4.50 a install is fine but after reboot is the place where the trouble begains, vista takes the new hardware and install card say that the material is ready for use to check to see if it has installed the HDD attached to one of the ports on the card no luck so if you access the USB controller in the Device Manager there is a yellow tri angle againt the hub USB 3.0 under properties of card error is code 10 this device cannot start , I am a very exprence IT person but it has beat me

  What I've done

  1 reinstalled and uninstalled the driver several times
  2 tried manually the drivers of instllaing using the INF files
  3. hard connected to a different Port on the map

  Hope someone can give me a solution

  Simon

  Simon,

  Please contact the Microsoft Community.

  I wish that you run these FixIt. Let us know if they help.

  http://support.Microsoft.com/mats/hardware_device_problems/

  http://support.Microsoft.com/mats/Windows_USB_diagnostics

  Let us know if it works for you.

• BSOD problems with a computer of windows 8

  Hello. I've had my computer for over a year now, and since about a week after I got it I had several problems with it. Initially, I had problems with usb devices works sometimes not. In this case I have to restart several times hoping to rework them. Over time, that has become less of a problem, but still exists. Then when I play games on my pc as the League of legends and world of warcraft games themselves would break several times. I also had problems with different programs crashing like Skype, google chrome and also blocks flash in chrome. Soon enough my whole system was crashing with BSOD messages or sometimes would be only to randomly restart or freeze.

  Here is a list of the different BSOD:

  irql not less or equal, page fault in nonpaged area, kmode exception not handled, pool header corruption of infrastructure critical bad memory management

  Unexpected kernel mode trap and driver irql not less or equivalent. With several different drivers be blamed.

  Now its to the point where I'll watch a live stream on twitch.tv or a video on youtube and it will crash after a few minutes. It happens more often in these situations, or in game, but it can also happen randomly even if soon as just start or idle.

  I tried many different things to update many pilots to replace my ram and hard drive as well as full reinstalls of windows and system different restore points. I wanted to ask you on this forum about it to see if it has what I can do to solve this problem before I send in for repair because I prefer not to be without him for an extended period of time.

  Thank you for hearing me.

  These accidents were related to the corruption of memory (probably caused by a driver).

  Please run these tests to check your memory and find which driver is causing the problem.

  
  

  If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.

  
  

  Since then, it is more likely to be a pilot run everything first.

  1-Driver Verifier (for full instructions, see our wiki here)

  2-Memtest. (You can learn more about running memtest here)

  
  

  Co-written by JMH3143

  .

  You have an older driver that needs to be updated. Associated with MBfilt64.sys Audio driver of Creative Technology Ltd.

  You must also upgrade to win 8.1 at least.

• Window vista xps 420 problem with USB ports.

  I have problems with window vista dell xps 420 machine, all USB ports are not recognized, unless the computer is restarted or rebooted. anyone has a suggestion.

  Hi Miguelsmith,

  1. When did you start to question?

  2. you remember to make changes to the computer recently?

  You can uninstall and reinstall all USB device manager entries and check if it helps.

  a. Click Start and typedevmgmt.msc and then click OK. Device Manager opens.

  b. expand Bus USB controllers.

  Note: You will need to scroll down to find this point.

  c. the first USB controller under Bus USB controllers right click and then click on uninstall to remove it.

  d. Repeat steps above for each controller USB is listed under Bus USB controllers.

  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  f. check the USB device to see if it works

  You can also consult the following article:

  Tips for solving problems of USB devices

  Hope this information is useful.

• Satellite M70-190 - problem with USB

  Hello!
  After you uninstall Windows XP and BIOS update, I have a problem with the USB ports. My work does ' t of USB flash drive. Windows also find a USB flash drive, but I can't find it in "my computer".
  If anyone idea about this problem?
  PS, External HARD drive works perfectly, as the USB mouse and USB WiMax modem.
  I m hoping someone out there can help with this problem.

  If I understand you well you don't have problem with USB port, but with a single USB device. Right?

• Problem with USB on the computer.

  Hi, I'm not very good with computers at all. I have a HP pavilion which all works fine until the other day, now it may just be a coincidence but I plugged my iPhone for the first time and since then none of my USB devices are appearing when I plug them in. his making the noise, but its all just not appearing on my Explorer of files of any suggestion?

  Hello

  Check their documentation online with the HP Support and drivers, diagnostics and ask to their
  Forums about known problems.

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  Also check with iPhone Support as there may be a problem with this phone.

  iPhone Support and community
  http://www.Apple.com/support/iPhone/

  ====================================================

  Troubleshooting you can try:

  Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
  According to needs). Win + D key calls the office and using Win Key active / disable the Office
  and the splash screen.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Windows key + X (or right click in the lower left corner) - (Admin) command prompt

  C:\Windows\System32\ >

  At the prompt, type in SFC/scannow above
  (There is a space between C and /)

  How to run the command "SFC/scannow" at startup or in Windows 8
  http://www.eightforums.com/tutorials/3047-sfc-scannow-command-run-Windows-8-a.html

  -----

  Then run CheckDisk (chkfdsk/f/r)

  File (formerly Windows Explorer)

  Right click on drive C: - Properties - tab tools - error checking - Check

  Windows 8/8.1 - improve performance by optimizing your hard drive - see "to repair a drive:
  http://Windows.Microsoft.com/en-us/Windows-8/improve-performance-optimizing-hard-drive

  How to check a drive for errors with "chkdsk" in Windows 8/8.1
  http://www.eightforums.com/tutorials/6221-chkdsk-check-drive-errors-Windows-8-a.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for your devices (can have
  zero or more than one) and top - right click UNINSTALL.

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the driver and battery USB

  This KB shows XP how to and methods of Vista and Windows 7 are identical (and
  Windows 8/8.1)
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick three 1
  are there choices to see if any.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ------------------------------------------------------------------------------------------------

  Install USB 3.0 and other USB devices
  http://Windows.Microsoft.com/en-us/Windows-8/install-USB-3-USB-devices

  Hardware and drivers
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Set up your PC - configure your devices
  http://Windows.Microsoft.com/en-us/Windows-8/set-up-devices#1TC=T1

  Why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  What happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  ===================================================

  If necessary:

  Try to do a "Refresh you PC without affecting your files" (or modification of your personal data
  settings) or even a restore.

  Windows 8/8.1 includes special discount methods (keep files and settings) or a reset
  (new installation remove all).

  How to restore, refresh or reset your PC
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  How to create a system image to refresh your PC in Windows 8
  http://support.Microsoft.com/kb/2748351

  How to update Windows 8/8.1
  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  How to reset Windows 8/8.1
  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Problem with USB Redirection on Horizon View Client v2.3.0 for Linux

  I had a problem on the USB Redirection when connecting to the Server of VMware View by Horizon View Client v2.3.0.

  1. Here is our configuration:
     1. Server:
        1. Horizon View Server 5.5 + Windows 7 Enterprise VDI
     2. Client:
        1. Thin client (TI ARM platform - 8148)
        2. Horizon View Client v2. 3 for Linux
        3. USB Flash: Kingston 8 GB USB 2.0, FAT32
  2. The issue: USB flash can not redirect to VDI successfully.
  3. Some status on our test:
  • The USB is plugged USB port on workstation before connecting to Horizon view Server 5.5
  • Light client can recognize and use USB flash to the local site.
  • When we connect to VDI, we can see the USB driver is responsible for research and installation, but windows VDI() reports fail to install the USB driver finally. It seems that VDI trying to acknowledge the failure of USB flash but finally.
  • It is held even Let's restart the workstation and VDI.
  • Attached file is the log of the Horizon of the VMware View Client.

  
  All welcomed to this topic?

  Unfortunately the newspapers show much... (note: they do not contain client-side logs)

  one thing I thought well... since he is a computer thinClient - we have seen the questions that manufacturers computer thinClient some of their own 'management' software install on the client. He often tries to do things with usb devices (maybe try to share them between a receiver client citrix application and view client app or maybe just there is a citrix receiver application installed too). In our experience, we've seen these apps interfere between them as they try to hang the bottom of usb devices down into the kernel.

  as such, could you try stop any 3rd party services - either citrix or your provider of thin client and then try again.

  If the problem persists, can you be sure to also collect these log files from the computer thinclient:

  Windows client

  • %ProgramData%\VMware\VDM\logs\debug-*.txt
    AND
  • C:\Windows\Temp\vmware-SYSTEM\vmware-usbarb-*.log

  Linux client

  • default /tmp/vmware-root/VMware-view-Usbd-*.log
    AND
  • / Library/Logs/VMware/vmware-usbarbitrator -.log

  for reference, the Agent-side usb connects:

  • %ProgramData%\VMware\VDM\logs\debug-*.txt

  see you soon

  peterB

• Problem with playback device?

  Video call in progress version 7.2.59.103 3 days ago made in New Zealand was in line for 40mins no problem what ever. as soon as I ended up call message problem with playback device. and as soon as I use either call or video call immediately, the page returns to the home page and does not appeal. checked devices audio all working correctly, no update of windows for the last 3 weeks. using Skype on my asus laptop 5 years on widows 7

  Hello, do not know what I did but trhe message has diasppeared, and the test call also works OK now.

• Help: problem with playback device

  Hello

  My dell latitude e7240

  and my headset logitech g150

  does not connect it says: problem with playback device

  It calls for 1 second then ends

  and when my friends try to call the said

  contact can only receive instant messages

  Help, please

  and fast

  Thank you very much

  I did a diagnostic test and other results are here

  https://www.dropbox.com/s/ipvyg52xhfwjrly/Dxdiag.txt?DL=0

  and Skype is the last

  Thank you

  answer soon

  Morgan

  Topic/title edited for clarity.

  Still no trace of your helmet and Avnex Virtual Audio Device is always installed.

  The specified Audio Capture Source only is Avnex Virtual Audio Device

  audio Capture Sources :

  Microphone (Avnex Virtual Audio Device), 0 x 00200000, 0, 0, qcap.dll, 6.06.9600.16384

  Open the Windows Device Manager. Are there looking for this virtual audio capture device, then uninstall it.

• "the problem with playback device" with Skype.

  receive 'problem with playback device' with Skype.  When I go to the Control Panel on my pc dell under sounds, etc., there is no option of reading before it takes.  have spent hours on Skype and my pc. Help!

  Hi BeverlyBowers,

  Facing any problem with the sound on the computer other than on Skype?

  Problem with playback device means that Skype cannot find a speaker or a headset that is properly configured on your machine in order to make a call.

  Method 1:
  I suggest you to run the Fixit and check if it helps.

  Automatically diagnose and fix the audio problems and Skype webcam
  http://support.Microsoft.com/mats/Skype/

  Method 2:
  If the problem persists, I suggest that you make sure that speaker or headphones are selected by default.

  a. go to Start and click on Control Panel.
  b. click on her, then a new window will open.
  (c) in the new window click on the tab "recording" and right click in the window and click Show disabled devices.
  d. now check if the speaker or headset is listed here and right click above and choose Activate.
  e. highlight the speaker or headphones and click on 'Set as default'.

  Method 3:
  If the problem persists, I suggest you install the latest audio drivers on the manufacturer's Web site and check if it helps.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• problem with the drivers for the card microsoft virtual wifi miniport... problems with PnP devices

  He said to reinstall the drivers for this problem, but they don't reinstall... also he says hardware changes have been detected... can someone explain in easy to understand words what the problem is and how to fix it... pleaseeeeee... Thank you... The convenience store said: THERE IS A PROBLEM WITH THE DRIVER of MICROSOFT VIRTUAL WIFI MINIPORT ADAPTER... DRIVERS MUST BE REINSTALLED... it won't reinstall... also: PROBLEM WITH PnP DEVICES HARDWARE CHANGES HAVE BEEN DETECTED? CAN SOMEONE HELP ME UNDERSTAND, IN EASY WORDS, EXACTLY WHAT I NEED TO DO TO FIX THIS... CD-ROM... IM USING A SAMSUNG LAPTOP MODEL NPR 519 RUNNING WINDOWS 7... Thank you... Update on the microsoft Web site says: this DEVICE no IS NOT WORKING PROPERLY BECAUSE WINDOWS cannot LOAD THE DRIVERS REQUIRED for THIS DEVICE (code 31)... im not computer savvy please someone help

  Hi MAGIC,

  It seems that you may need to update your BIOS firmware.

  You may need to contact Samsung for more information, if the update is available for download on their Web site.

  When started this issue is happening?

  You can disable the virtual WiFi adapter, as it essentially works as a tool of development at the moment:

  http://msdn.Microsoft.com/en-us/library/dd815243%28VS.85%29.aspx

  What is the device that has the problem?

  Reinstall the drivers to fix the problem?

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.