Problems with videodriver after update BIOS on my SP4600

Similar Questions

• seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?

  seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?

  The 'list' of relevant articles that I know, they are now

  -You can read about the problems in the present statutes and possibly find workaround solutions, particularly in the last

  If you are unable to activate your iPhone, iPad or iPod touch after installing an update - Apple Support

  Apple iOS suspension 9.3 updates for older devices, work on activation fix | IVous

  Apple launches new version of iOS for iPad users 9.3 2 affected by bricking bug | 9to5Mac

  GSM of unfixed addresses Apple iPad 2 Bug with revised Activation iOS 9.3, but the larger question remains - Mac rumors

  If you are unable to activate your iPad 2 (GSM model) update to iOS 9.3 - Apple Support

  9.3 iOS update issues

  Leave a post by: ChitlinsCC

• Satellite A60: Problem of memory after update Bios V.1.9

  Hi all

  I've just updated my bios to version 1.9 last week. Previously, I've upgraded my RAM from 512 MB to 1.5 GB (P4 2.8 GHz., 40 GB HARD drive) and my phone worked perfectly with the old Bios and RAM. After the Bios Update to the new version, 1.9, my laptop does not accept the module of RAM upgrade, windows xp still shows the blue screen, and then restart.

  After upgrading RAM off, my laptop works again. I tried several ways to solve this problem as take the battery, then reinsert the RAM or even formatted my HARD drive and installed a new Windows XP, but it didn't work. So what can I do to make my laptop to accept the upgrade of RAM? How to solve this problem? For this reason I now intend to buy a new laptop, if the problem can not be solved since I simulate a program on this laptop, so it requires a lot of memory.

  Thank you very much in advance for your answer.

  [Edited by: admin]

  Hello

  I put t really know what is the problem with the new update of the BIOS. In my opinion, you should contact the after-sales Service of Toshiba partner in your country and explain to them the situation. If your new module memory is compatible with the unit you should tell you want to have the old version of the BIOS. As much I know as technicians for this.

  If they see that there is a problem with the BIOS update, I'm sure they will for free.

  Good luck!

• Problems with scrolling after update

  IM currently using the BlueJ ide and after updating to the new system / update (macOS Sierra) there is significant lag / jitter when scrolling. This problem only occurs when you use the scrolling with two fingers with the touch pad. When I use a mouse / or click the scroll bar on the side, it seems to go well. Not sure if there is a problem with BlueJ or the new OS. Would be very interested for some suggestions on how to fix this very annoying problem. (Using a Macbook pro 13, 2015).

  Thanks a lot to all the answers

  The obvious question would be if you see the problem of scrolling in Mac OS standard applications such as Mail, Notes and Safari.

  If this isn't the case, it is likely BlueJ.

• Problem with Safari, after update

  I use a MacBook Pro, OS X Yosemite, 10.10.5 - and after the last update, I have problems with Safari (version 9.1). Some Web pages I visit every day is more responsible (I get the message that the page needs to be recharged because she failed the first time, but this does not work then either). This problem started just after the last update. Does anyone else have this problem? What I have to go back to the previous version or can I fix this problem?

  If you have problems to open Web pages, take a look at these techniques proposed by Apple of troubleshooting.

  https://support.Apple.com/en-us/HT204098

  Go to the Safari menu (at the top right of your screen next to the Apple icon), choose 'Quit Safari'

  Press the "Shift" key and while holding this button on your unique keyboard, click the icon of Safari on your Dock.

  Open Safari - Preferences - Privacy - data to remove any Web site.

  Open the menu to go with the Option (Alt) key - library - key locate Safari folder and place it on your desktop. Restart your Mac, open Safari and delete the file from your desktop.

  Also, try the following steps:

  Restart your Mac.

  Try to start:

  -Stop your Mac

  -Wait until your computer turns off and after that press the power button

  -Just after you hear the startup tone, press in and hold the SHIFT key

  -Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar

  -Once your Mac boot, restart dhcpd as you usually do.

  If this does not help, follow the instructions below:

  -Stop your Mac

  -Wait until your computer turns off and after that press the power button

  -Just after you hear the startup tone, press in and hold the SHIFT key

  -Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar

  -Once you see office, start a scan Disk Utility to detect and repair file system errors (remember to choose your primary hard drive)

  -Click on the disc to check, then, if requested to solve the problems on the repair disk

  -After that click on verify disk permissions, and then click Repair disk permissions

  -Once the process is complete, stop your Mac and turn it on again after 30 seconds

  I hope this helps!

• HP laptop - 15-r150nm: problem with wifi after update realtek adapter

  Hello! I've updated some drivers of HP customer service and then restarted computer. When it is on I couldn't use wifi. When I select the problems, it says: 1) "" Realtek 802.11B/G/N WIFI adapter RTL8723BE has some problems to the program control or hardware. "" (it is Croatian, so I tried to translate it for you)

  (2) "a network cable is not plugged in correctly or may be broken.

  What should I do, I have only this laptop and internet wifi, write this work? Thank you!

  Hi @frane53nja,

  Welcome to the HP Forums!

  This is a wonderful place to find answers and advice!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums.

  Learn how to post and more

  I understand that your laptop works OK and after updating drivers on reboot HP customer service, you have lost your wireless network. When you run the Windows troubleshooting tool, you received a message that there was a problem with the NIC due to recent hardware or software changes.

  Here is a link to HP PC - troubleshooting wireless network and Internet (Windows 8) that should help you.

  Before you perform a restore, as shown in the above troubleshooting steps, you can try this option.

  Go to the nursery of the device

  Click the network tab to expand the list.

  Right-click on the wireless network adapter and select roll back driver.

  Repeat this process for all types of adapters listed.

  While on this screen please check this definition also.

  Right click on the wireless adapter and choose Properties.

  Click the power management tab.  If "allow the computer to turn off this device to save power" is checked, please remove and click OK. Repeat this operation for all types of adapters listed.

  Please let me know the results.

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as you. Please consider tagging the post in order to solve your problem as "accept as Solution" to help other members of the community!

  To show recognition for my efforts please click the Thumbs Up below.

• Windows7 + linux mint double PC operated facing problem with windows after updating windows 7 to windows 10

  I was running the two operating system on my PC windows 7 and linux Mint. However, after update from windows 7 to windows 10 my PC can not be operated with windows. Rather when I select windows as my operating system at the start of my PC, it shows that the operating system is missing. But still I can run my PC Linus Mint. Now what should I do to recover my windows?

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you can not use Windows 10 after upgrade to Windows 7.

  It may be possible that the upgrade to Windows 10 gets no success.

  I suggest you to read the thread by Andre Da Costa MVP community moderator replied on 15 June 2015 on the same question and check if that helps.

  http://answers.Microsoft.com/en-us/Insider/wiki/insider_wintp-insider_install/how-to-upgrade-a-dual-boot-installation-of-Windows/d7ca80ce-96b0-4F0A-9A8E-4038ded592b2

  Note: Using the third-party links, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that any problems resulting from the use of third party

  Part links can be resolved. By using the links to third party is at your own risk.

  You can also check:

  http://answers.Microsoft.com/en-us/Insider/wiki/insider_wintp-insider_install/frequently-asked-questions-Windows-10/5c0b9368-a9e8-4238-B1E4-45f4b7ed2fb9

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• problems with ftp after update of windows 7 and windows xp

  After updates windows 7 and windows xp (updated April 10, 2014) my computers give different errors with FTP, Explorer Windows and FileZilla transfer.
  In windows 7 is resolved by uninstalling the updates. In Xp, no.
  Any idea?

  See the thread below for a possible solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/this-FTP-site-cannot-be-viewed-in-Windows-Explorer/e699d41e-98ae-48c1-9231-d570d46c0f38

• Satellite P300D - problem with reboot after update the HARD drive

  Hello

  I have laptop Satellite P300D - 12 c and recently, I put a new hard drive, the Seagate momentus 7200 RPM 2.5 "500 GB. It works well, but I have a strange problem; normally when I reboot the laptop when it will close something sounds, in the figurative sense I could say "something moves" for a bit in the DVD - ROM drive and shuts down and then restarts.

  Now, when the reboot happens to the part of the dvd - rom drive, I described above it stucks there... "something is happening" on the dvd - rom drive as trying to permanently access a dvd or something and he does the same thing until I force it to shut down by pressing the appropriate button. It happens once in two attempts to restart.

  Does anyone have a solution or a tip or something? If you do not understand something to tell me,

  Thank you very much

  Hello!

  I agree with Akuma. Maybe the drive is loose and so you should try re-allocation of places there.
  Maybe it works

  And updated the BIOS, you can find the Toshiba site:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Good luck and give us feedback! :)

• problems with wifi after update? anyone?

  I use A953, just updated to build mils2_u6_4.1 - 22, the system version is: 64.1.22.S953. Retail.en.DE

  So far, I like the update, looks cool, like the animation of the screen-go-to-sleep

  But, my WiFi is not working properly, there are just a couple of the available networks and mine is excluded...

  Has anyone of another expirience of something similar?

  Help!

  Thanks in advance,

  Luka

  What I read somewhere else (may be exceeded), is some wifi router to use an automatic selection of chanel. By some users when the chanel 13 is used there is a problem. When they choose the beach (..-12) the problem disappeared. This problem seems to occur with some AVM fritzbox

• problem with start after updates

  MY computer is in a continuous loop.  It closes down to install windows updates and now it opens with the configuration of updates and gives thanks to the step 1 and 2 and then stops.  I tried to press F8 when it restarts and then try to start in safe mode with command prompt so that I can put in order to make a system restore, but it never gives me the opportunity to type in the command.  Instead, he goes to the window to the Startup Repair, looking for repairs and restarts on its own and I'm back to square one.

  You should be tapping F8, pressing her to get into safe mode.

  If you can't get into safe mode, you need to try this way to fix your computer:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  If yours falls into the category above, download the ISO on the link provided and make a bootdisk of it.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Problem with scrollbar after update with App Builder 32.4.4.

  Hey,.

  I just created an app update with the new version of the DPS App Builder (32.4.4.). After the update the scroll bar (of the Viewer - no content drop-down) moved to it of original position. (see screenshot)

  Any ideas?

  

  The update went live Saturday. If you do not have automatic updates enabled for your devices, then you should see the update in the App Store Update tab.

• Problems with bookmarks after update to version 16

  My Favorites used to appear in the drop down bookmark, but are now available in the bookmark sidebar. I tried the reset to the default option. I tried to delete the places.sqlite file and the file localstore.rdf profile, but no change. I also try to delete the places.sqlite - shm and places.sqlite - wal?

  How can I get my favorites back to where they were?

  In addition, I can't export bookmarks as html - past by the movements, but no file is created.

  My problems seem to have disappeared since version 16 uninstall and reinstalling version 15.0.1, help-> comments telling me now it is up to date!

  I suppose that v 16 is not ready for prime time hours.

• Satellite L655 (PSK1JE) - 100% after update BIOS fan speed

  Hello

  Yesterday, I do BIOS update since version 2.10 to 2.20. The update of configuration correctly but the problem is the fan, the speed is 100% all the time.

  others have this problem with this version of bios?

  Can I downgrade to the version of the bios?

  Thank you and waiting for your answers

  Hi kingofcopy,

  Load default settings after updating the BIOS? Go into the BIOS, press the F9 key to load the default values.

  Have you tested the behavior of fan with cooling optimized battery option? In Windows power management, you can define more low fan speed in power management to reduce the activity of the fan.

  Check this box!

• Print problems with the recent update to Version 10.11.5

  Print problems with the recent update to the Version of El Capitan 10.11.5.  Cannot print to my Epson and Samsung printers after update to new IOS.  Print jobs get hooked on my Mac Pro.

  Roger 510 wrote:

  Print problems with the recent update to the Version of El Capitan 10.11.5.  Cannot print to my Epson and Samsung printers after update to new IOS.  Print jobs get hooked on my Mac Pro.

  Have you checked with Epson for an updated printer driver?