problems with wifi after update? anyone?

Similar Questions

• HP laptop - 15-r150nm: problem with wifi after update realtek adapter

  Hello! I've updated some drivers of HP customer service and then restarted computer. When it is on I couldn't use wifi. When I select the problems, it says: 1) "" Realtek 802.11B/G/N WIFI adapter RTL8723BE has some problems to the program control or hardware. "" (it is Croatian, so I tried to translate it for you)

  (2) "a network cable is not plugged in correctly or may be broken.

  What should I do, I have only this laptop and internet wifi, write this work? Thank you!

  Hi @frane53nja,

  Welcome to the HP Forums!

  This is a wonderful place to find answers and advice!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums.

  Learn how to post and more

  I understand that your laptop works OK and after updating drivers on reboot HP customer service, you have lost your wireless network. When you run the Windows troubleshooting tool, you received a message that there was a problem with the NIC due to recent hardware or software changes.

  Here is a link to HP PC - troubleshooting wireless network and Internet (Windows 8) that should help you.

  Before you perform a restore, as shown in the above troubleshooting steps, you can try this option.

  Go to the nursery of the device

  Click the network tab to expand the list.

  Right-click on the wireless network adapter and select roll back driver.

  Repeat this process for all types of adapters listed.

  While on this screen please check this definition also.

  Right click on the wireless adapter and choose Properties.

  Click the power management tab.  If "allow the computer to turn off this device to save power" is checked, please remove and click OK. Repeat this operation for all types of adapters listed.

  Please let me know the results.

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as you. Please consider tagging the post in order to solve your problem as "accept as Solution" to help other members of the community!

  To show recognition for my efforts please click the Thumbs Up below.

• Problems with WiFi after put 10.11.2 up-to-date.

  Mid 2011 iMac.  Problems with WiFi after put 10.11.2 up-to-date.  No associated network.  Everything was fine before the update. All the pre 10.11.2 device works fine.  Anyone else having issues?  I have to disconnect and reconnect manually.  WiFi drops every 5 to 10 minutes.  Nothing has changed on the machine something of the update.

  Please do not comment on the age of the system.  Achieve a Mid 2011 arrived at a possible replacement point.  I have many other new Mac at home.  The Mid 2011 is spec'd with 16 GB of RAM, i7 and SSD.  It's always very fast.

  Thank you in advance for the answer...

  Hi Captainsniz

  There are a few things to try. Keep doing this until the problem disappears.

  First of all, if you have not already, shut down the computer completely, wait about 1 minute, then restart.

  Disconnect the wifi network either via system preferences, either by pressing the "Option" key and clicking on the wifi menu bar icon.

  Reset the DHCP lease by going to system preferences > network and show Advanced Options, and then click the button to "Renew the DHCP lease" TCP/IP tab.

  You can delete the wifi network of system preferences > network > network name... then close system preferences. Then reopen and add the network in.

  You can also restart your wifi router, it erases the old connections. Most of the routers you just turn off and wait a few minutes, then restart. You can also reset your ISP modem if you have a.

  Finally, you can try to reset the PRAM and SMC on your Mac. I'll get this info here on Apple Support KBs for your particular Mac.

  Be sure to back up your computer.

  Hope this helps, Greg

• seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?

  seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?

  The 'list' of relevant articles that I know, they are now

  -You can read about the problems in the present statutes and possibly find workaround solutions, particularly in the last

  If you are unable to activate your iPhone, iPad or iPod touch after installing an update - Apple Support

  Apple iOS suspension 9.3 updates for older devices, work on activation fix | IVous

  Apple launches new version of iOS for iPad users 9.3 2 affected by bricking bug | 9to5Mac

  GSM of unfixed addresses Apple iPad 2 Bug with revised Activation iOS 9.3, but the larger question remains - Mac rumors

  If you are unable to activate your iPad 2 (GSM model) update to iOS 9.3 - Apple Support

  9.3 iOS update issues

  Leave a post by: ChitlinsCC

• Satellite L70-A-118 - problems with WiFi after Windows 8 to 8.1 Win update

  Dear Sir/Madam,

  After that update of Windows 8 for Windows 8.1 WiFi disconnects regularly and if there is a connection
  the connection is limited.

  I followed the update instructions I downloaded with the Windows 8.1 drivers.

  The WiFi LAN adapter settings are intact on DHCP.

  Waiting for assistance to help me a stable wifi connection.

  Kind regards

  Low van Leeuwen

  Two weeks ago I've updated my Satellite U940-103 and everything went well. There is no problem with WLAN. I use it all the time.

  What model of laptop do you have?
  Have you installed the driver for the Toshiba download page or driver provided by Windows update (sometimes classified as important update)?

• Satellite Pro C850 - problems with WiFi after Windows update 8.1

  Hello

  I was wondering if someone could give some advice on a problem I have.

  Had an adjustable C850 Pro for a few months and worked well on Windows 8.
  I myself am then harassed and intimidated by Microsoft Update in order to install Windows 8.1 and in a moment of weakness, I succumbed (got sick of the nagging).

  Since that time, my wifi is very intermittent; either I'm on another computer write this and the laptop is essentially not connected to the internet.

  For some reason any (although I didn't try it before), I can not connect via ethernet either, so I think it's probably the driver problems. (I also tried to connect the public wifi but fails).

  I tried to install the driver WiFi Toshiba 8.1 but that has not solved the problem.
  Then I noticed that I'm supposed to install a bunch of drivers in the order.

  Maximum setting to do it, but the first package (associated with bluetooth) said I have to remove the current driver... I try by "turning off", then "Uninstall" but 8.1 seems to re - install automatically and I don't know how to disable this option (I can try to delete the driver file, I guess, but I'm sure 8.1 covered too and will probably launch a drone to try me out ", if I do). *

  Any kind soul there suggestions on a way forward? Pls.

  I see in the instructions of Toshiba Windows Update 8.1 should I have uninstalled the drivers before the update, but there is not much I can do about it now. :(

  Hello

  > I don't see in the instructions of Toshiba Windows Update 8.1 should I have uninstalled the drivers before the update, but there is not much I can do about it now
  All your problems with the Windows 8.1 update related to the fact that you have not upgraded the Windows 8.1 system as recommended by Toshiba.

  Details:
  http://www.Toshiba.EU/innovation/generic/windows8_1-message/

  Solution?
  Back to Windows 8 (reset the system back to factory settings)
  Then, install all updates and patches for Windows 8 and follow along with the upgrade of system as described on the Toshiba Windows 8.1 upgrade page

  On the page of the Toshiba UE driver, you will find all the instruments that must be installed in the correct order and Windows 8.1 driver!

• Problem with Safari, after update

  I use a MacBook Pro, OS X Yosemite, 10.10.5 - and after the last update, I have problems with Safari (version 9.1). Some Web pages I visit every day is more responsible (I get the message that the page needs to be recharged because she failed the first time, but this does not work then either). This problem started just after the last update. Does anyone else have this problem? What I have to go back to the previous version or can I fix this problem?

  If you have problems to open Web pages, take a look at these techniques proposed by Apple of troubleshooting.

  https://support.Apple.com/en-us/HT204098

  Go to the Safari menu (at the top right of your screen next to the Apple icon), choose 'Quit Safari'

  Press the "Shift" key and while holding this button on your unique keyboard, click the icon of Safari on your Dock.

  Open Safari - Preferences - Privacy - data to remove any Web site.

  Open the menu to go with the Option (Alt) key - library - key locate Safari folder and place it on your desktop. Restart your Mac, open Safari and delete the file from your desktop.

  Also, try the following steps:

  Restart your Mac.

  Try to start:

  -Stop your Mac

  -Wait until your computer turns off and after that press the power button

  -Just after you hear the startup tone, press in and hold the SHIFT key

  -Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar

  -Once your Mac boot, restart dhcpd as you usually do.

  If this does not help, follow the instructions below:

  -Stop your Mac

  -Wait until your computer turns off and after that press the power button

  -Just after you hear the startup tone, press in and hold the SHIFT key

  -Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar

  -Once you see office, start a scan Disk Utility to detect and repair file system errors (remember to choose your primary hard drive)

  -Click on the disc to check, then, if requested to solve the problems on the repair disk

  -After that click on verify disk permissions, and then click Repair disk permissions

  -Once the process is complete, stop your Mac and turn it on again after 30 seconds

  I hope this helps!

• Problems with scrolling after update

  IM currently using the BlueJ ide and after updating to the new system / update (macOS Sierra) there is significant lag / jitter when scrolling. This problem only occurs when you use the scrolling with two fingers with the touch pad. When I use a mouse / or click the scroll bar on the side, it seems to go well. Not sure if there is a problem with BlueJ or the new OS. Would be very interested for some suggestions on how to fix this very annoying problem. (Using a Macbook pro 13, 2015).

  Thanks a lot to all the answers

  The obvious question would be if you see the problem of scrolling in Mac OS standard applications such as Mail, Notes and Safari.

  If this isn't the case, it is likely BlueJ.

• Pavilion p256ur: problems with Wifi after waking up (only)

  I have a problem with my new laptop Pavilion p256ur. After he wakes up (only) the wifi (Broadcom BCM 43142) adapter does not. turned on in device management, it can not find any network. WiFi button (in the system settings menu and status bar) don't respond - it seems that the wifi is turned off. I try to:

  1 power off and power on this card in Device Manager

  2. turn off power off (to save energy) option in the settings of the adapter

  3 (default) old uninstal and install the most recent drivers

  4. install the latest driver for chipset

  5 control wlansvc service-, she strives to after wake up

  but his do not solve the problem.

  If I try to reinstall the drivers wifi after last stride upward of his works, but until the next morning to the top.

  In an event list management device devices there is a message:

  Bcmwl64.inf_amd64_0f3430bbd776c163\bcmwl64.inf installation driver for device with ID PCI\VEN_14E4 & DEV_4365 & REV_01\0000E2FFFFCDD85D00 & SUBSYS_2230103C, supplemented by the following condition: 0x0.

  After the system restart wifi works correctly, so if I want to use the wlan I must not sleep notebok. but restart it every time (or reinstall the drivers) is not comfortably. can you help me please?

  Hi @Medvejo,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your 15-p256ur HP Pavilion Notebook and Wifi problems after wake up. I see that if you change the balanced power plan options option in the book will help. Here is a link that will help you. Go to your power options. Select balance, then click on change plan settings. Click on change advanced power settings. Click on choose what the power button. Figure: 13 choose what the power buttons. -Uncheck allow the computer to turn off this device to save power under the management of the power supply of the wireless adapter.

  Please let me know how it goes.

  You can say thanks for trying to help by clicking on the Thumbs Up below! .

  Thank you.

• Windows7 + linux mint double PC operated facing problem with windows after updating windows 7 to windows 10

  I was running the two operating system on my PC windows 7 and linux Mint. However, after update from windows 7 to windows 10 my PC can not be operated with windows. Rather when I select windows as my operating system at the start of my PC, it shows that the operating system is missing. But still I can run my PC Linus Mint. Now what should I do to recover my windows?

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you can not use Windows 10 after upgrade to Windows 7.

  It may be possible that the upgrade to Windows 10 gets no success.

  I suggest you to read the thread by Andre Da Costa MVP community moderator replied on 15 June 2015 on the same question and check if that helps.

  http://answers.Microsoft.com/en-us/Insider/wiki/insider_wintp-insider_install/how-to-upgrade-a-dual-boot-installation-of-Windows/d7ca80ce-96b0-4F0A-9A8E-4038ded592b2

  Note: Using the third-party links, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that any problems resulting from the use of third party

  Part links can be resolved. By using the links to third party is at your own risk.

  You can also check:

  http://answers.Microsoft.com/en-us/Insider/wiki/insider_wintp-insider_install/frequently-asked-questions-Windows-10/5c0b9368-a9e8-4238-B1E4-45f4b7ed2fb9

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Problems with WIFI after sleep-wake up.

  -Wifi does not randomly after coming out of sleep.
  -Sometimes it can see the network with at least 2-3 bars, but does not connect and the Troubleshooting Wizard offers no help.
  -wifi only way to recover is to uninstall the wifi adapter driver in Device Manager and then reinstall it, and then it works fine.
  -This problem only occurs when I am a little close to the edge (still a lot within wifi range) of the router. otherwise, IE very close to router, there is no problem at all.
  n ' has not had any problems with windows 7 at first, but wifi problems randomly started upward. uninstalled the 2-3 most recent programs with Revo Uninstaller.

  Notes: thinkpad x 61 Tablet, fresh running windows 7 (not upgraded), card express 11 a/b/g wireless lan mini pci, router is an apple Airport extreme from 40 feet away with WPA2-Personal Security.

  Hey art vandelay.

  Welcome to the Microsoft Answers community.

  I suggest you try the methods one by one and check below.

  Method 1:  Uncheck allow the computer to turn off this device to save power option in Device Manager and check.

  1: click on start, go to control panel. In Control Panel, click small icons to DISPLAY.
  2: find the network and sharing Center and open it.
  3: on the left side, you will see an option that says "change the map settings. Open it
  4: you'll be there, two local and wireless connections. Right-click on WIRELESS one, and then select Properties.
  5: now, click on CONFIGURE.
  6: you will see 5 tabs, click on the last one that says "power management."
  7: now simply UNCHECK the first box that says "allow the computer to turn off this device to save power".

  Method 2: Perform the cycle of power modem/router.

  (1) turn off the power to the modem (unplug). If there is the router turn off the power (unplug).
  (2) unplug the Ethernet cable that connects the modem to the back of the computer or router on the back of the computer. Disconnect at the end of the computer. If there is a router, follow the same steps, disconnect at the end of the computer.
  (3) shuts down the computer (not restart).
  (4) wait at least 4 minutes.
  (5) switch on the modem. If there is a router enable the router as well. Wait for the lights on the modem\router to stabilize.
  (6) connect the Ethernet cable to the computer.
  (7) turn on the computer. Now, try to connect to the internet.

  Method 3: The restore of the system on your computer.

  System Restore will take your computer state permeable when it did not face such a problem, this can be done by selecting the correct restore point.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click on choose a different restore point and then click Next.
  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next.
  4. click on finish.

  For more information visit http://support.microsoft.com/kb/936212/

  You can also try methods provided in the article.
  http://support.Microsoft.com/kb/928152

  Hope this information is useful.
  Let me know if it worked.

  Thank you, and in what concerns:
  Umesh P - Microsoft Support

• problems with ftp after update of windows 7 and windows xp

  After updates windows 7 and windows xp (updated April 10, 2014) my computers give different errors with FTP, Explorer Windows and FileZilla transfer.
  In windows 7 is resolved by uninstalling the updates. In Xp, no.
  Any idea?

  See the thread below for a possible solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/this-FTP-site-cannot-be-viewed-in-Windows-Explorer/e699d41e-98ae-48c1-9231-d570d46c0f38

• Satellite P300D - problem with reboot after update the HARD drive

  Hello

  I have laptop Satellite P300D - 12 c and recently, I put a new hard drive, the Seagate momentus 7200 RPM 2.5 "500 GB. It works well, but I have a strange problem; normally when I reboot the laptop when it will close something sounds, in the figurative sense I could say "something moves" for a bit in the DVD - ROM drive and shuts down and then restarts.

  Now, when the reboot happens to the part of the dvd - rom drive, I described above it stucks there... "something is happening" on the dvd - rom drive as trying to permanently access a dvd or something and he does the same thing until I force it to shut down by pressing the appropriate button. It happens once in two attempts to restart.

  Does anyone have a solution or a tip or something? If you do not understand something to tell me,

  Thank you very much

  Hello!

  I agree with Akuma. Maybe the drive is loose and so you should try re-allocation of places there.
  Maybe it works

  And updated the BIOS, you can find the Toshiba site:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Good luck and give us feedback! :)

• Satellite P870 - problems with WiFi after Win 8.1 upgrade

  Wireless Internet is hopeless.
  Maybe that 3 to 10 pages will load correctly or not at all, for most not at all.
  Other wireless devices in the House are fine, as is the use of the Ethernet.

  Checked the drivers through the Device Manager, says that they are up to date.
  However using the toshiba service station he lists 12 updates including one for the driver Realtek wireless.

  The date of release permanently after the last version installed.
  Try to update by the service center to complete and then comes up with an error message, something like the process is completed by the user.

  Of course I never finished anything.
  Any ideas/thoughts? Just uninstall 8.1?
  Although I'd rather not.

  Hello

  Did you Win 8.1 installation instructions?

  The Win 8.1 drivers must be installed in the correct order!

  I found this info on the page of the Toshiba UE driver;

  1 wireless Intel display-> uninstall
  2 windows 8.1 update-> Install
  3 TOSHIBA Assist Office-> upgrade
  Driver Intel 4-> upgrade
  Display NVIDIA 5-> upgrade driver
  6 Intel Rapid Storage Technology driver-> upgrade
  Driver HD Audio NVIDIA 7-> upgrade
  Atheros Wireless LAN driver 8-> upgrade
  9 Realtek Wireless LAN Driver-> upgrade
  Driver Realtek 10 package filter Bluetooth-> upgrade
  TOSHIBA 11-> upgrade system driver
  Function key 12 TOSHIBA-> upgrade
  13 TOSHIBA eco Utility v2-> upgrade
  14 TOSHIBA PC Health Monitor-> upgrade
  Fingerprints TOSHIBA 15-> upgrade utility
  16 TFPU WBF remove fingerprint-> upgrade tool
  17 TOSHIBA HDD Protection-> upgrade
  18-> upgrade TOSHIBA VCR
  TOSHIBA 19 Blu - ray disc player-> upgrade
  ArcSoft TV5.0 20-> upgrade
  Plug-in for Windows Media Player-> upgrade TOSHIBA 21 resolution +.
  CyberLink MediaShow 6 for TOSHIBA 22-> upgrade
  23 TOSHIBA Media Player by TrueLink sMedio + -> upgrade
  24 TOSHIBA Service Station-> upgrade

• Problem with WIFI after Migration

  Hello everyone

  I'm new here, I have the small problem after migration of 10.9.5 system.

  I migrad my files to a MacBook Pro start 2014 for a Mac mini mid-2012.

  After the migration is successful on the Mac mini, the WIFI does not work on the Mac mini.

  I think it's a fault of the driver, but how do I install the WLAN driver?

  Thanks for the support

  Best regards

  Demian Klee

  Were the two Macs on 10.9.5? If this is not the case, what were the OSX versions?