Problems with Windows Installer after using System Mechanic.

I had a problem with my Dell 2 years and was told by the Support Dell buy iolo System Mechanic. However, now I have problems with Windows Installer (it is not installed correctly) and I've read that this can be caused by the registry cleaner in the iolo System Mechanic.

So, really two questions: 1. do I need iolo System Mechanic? 2. how to correctly install Windows Installer?

Thank you!

original title: Registry Cleaner/Windows Installer

So, really two questions: 1. do I need iolo System Mechanic? 2. how to correctly install Windows Installer?

1 no, the registry cleaners can give you immediate relief, but they are a big pain in the long term.

2. follow the four methods listed in the resolution section of the following article:

http://support.Microsoft.com/kb/2642495

Tags: Windows

Similar Questions

  • Problem with Windows Update after the removal of Virus

    My operating system is Win Vista 32 bit, had some virus closed my windows updates, have a view of the white page. Checked that my services and win update is in automatic mode has started, so I don't know why my updater gives me a red x saying windows updater is turned off.  Any suggestions?

    [Original title: Windows Update]

    https://answers.Microsoft.com/en-us/protect/Forum/protect_other-protect_scanning/problem-with-Windows-Update-after-removing-virus/3a8dd279-2732-4693-88bf-f5cea4afca96>

    It makes more sense. How to reset the Windows Update components?

    Yet, as indicated in The ball , the search results links do not work. I also used several browsers and DuckDuckGo. Maybe it's because the Windows Update Agent was changed some time ago and the article is no longer valid.

    EDIT: If the OP is also struggling to access the link I suggest using repair Windows updates available from tweaking.com. I suggest also using the Registry backup of the same author before hand.

    Repair the Windows updates

    http://www.tweaking.com/content/page/repair_windows_updates.html

    Registry backup
    http://www.tweaking.com/content/page/registry_backup.html

    I hope this helps.

  • Problems with Windows Installer - installer stops and shows the dialog on the command prompts

    Hello

    I hope someone can help me with this question... I looked long and seriously, and you have tried all of the suggestions posted (cancel/save, etc.).

    I am trying to install a program and Windows Installer stops right in the middle of installation and a dialog box appears with information from command line, and the only thing I can do is select 'ok'... the program is not installed.

    Here is the info that appears in the dialog box:

    Windows® Installer. V 5.0.7601.17514

    msiexec/option [optional parameter]

    Installation options
     
    Installs or configures a product
    /a
    Administrative installation - installs a product on the network
    /j [/t ] [/g ]
    Publishes a product - m for all users, allows the current user
     
    Uninstalls the product
    Display options
    / quiet
    Quiet mode, no user interaction
    / passive
    Automatic mode - only progress bar
    / q [n | b | r | f]
    Sets the user interface level
    n no user interface
    b Basic UI
    r reduced UI
    f-full UI (default)
    / Help
    Help information
    Restart options
    /norestart
    Do not restart after the installation is complete
    /promptrestart
    Prompts the user to restart if necessary
    /forcerestart
    Always restarts the computer after installation
    Logging options
    / l [I | w | e | a | r | u | c | m | o | p | v | x | + |. | *]
    i status messages
    w warnings recoverable
    e-all error messages
    a startup of actions
    r registers of the specific action of the
    u user requests
    c initial UI parameters
    m out-of-memory or fatal exit information
    o disk out-of-space messages
    p - Terminal properties
    v performance
    x extra debugging information
    + - Add to the existing log file
    ! -Flush each line in the log
    * - Log all information, except the x and v options
    / log
    Equivalent of / l *.
    Update options
    / Update [; Update2.msp]
    Apply updates
    / uninstall [; Update2.msp] / package
    Remove the updates of a product
    Repair options
    /f [p | e | c | m | s | o | d | a | u: v]
    Repairs a product
    p only if the file is missing
    o If the file is missing or an earlier version is installed (by default)
    e If the file is missing or an equal or higher version is installed
    d if the file is missing or a different version is installed
    c If the file is missing or checksum does not match the calculated value
    has all the files to reinstall the forces
    u all (default) user-specific registry entries
    m all requirements (by default) computer-specific registry entries
    s all (default) shortcuts
    v-runs from source and recaches local package
    Setting public properties
    [PROPERTY = PropertyValue]

    Consult the SDK Windows® install to get additional documentation on the
    command line syntax.

    Copyright © Microsoft Corporation. All rights reserved.
    Portions of this software are based in part on the work of the Independent JPEG Group.

    I hope someone has a suggestion for this problem... I just bought a new laptop and Windows 7 Professional came installed on it.

    Thank you

    Linney thanks for your response!

    The file I'm trying to install is an exe file (so the SIG file is embedded in the exe file).

    I tried the option "Run As Administrator" and it did not work.  However, you gave me an idea that has provided a work around that allowed me to install the program.

    Once this dialog box is displayed with all the control switches, rather than press 'OK', I left on the screen and went in the 'temp' folder and find the MSI program I tried to install (I cross referenced the timestamp of when I tried to install it to find).

    Once I found the updated file, I clicked it, and he proceeded to install the program... I have not had any other problems with the installation.

    So, there's something wrong with the way that the exe file have been created and how the files extracted from the msi file (these are files of Intel and Lenovo - driver updates - so I think they do these things) or there is a problem with Windows Installer.

    For now, at least, I have a work around I use until I find a solution to this problem of permanent

    Thanks for your help and for taking the time to answer!

    I hope this can help someone else in the future

  • Problem with Windows Installer (I think)

    Hey I just got a new 'game' PC with all the good things like i7 processor nvidia GTS 250 graphics card. So I guessed I would setup games. Games were installed very well the problems started when I tried to run SteamInstall.msi he looks ready to install for 1 second and then close and nothing happen. Even try to do once again nothing. So I gave up with it.

    Then I installed cod4, codwaw and download for both patches. When I try to install the patches it starts normal and after extractinng saying "" ".msi or msu or something it get stuck on the preparation for installation on both cod4, codwaw games and I think about others too... '".

    So I guess that's my Windows Installer problem... ? Windows Vista Home Premium SP2 (problems on SP1 also)

    Yoris,
    I think that if you had a problem with Windows Installer, then you would have also had a problem installing the games themselves.  If after installing just the game, you are able to start the game, then you will need to determine if you really need the patches you install.  If they fix game issues and do not add any content, then you may not even need of patches.  If it turns out that you do not have the patches and they are self extracting\installing files and then save them to your desktop and then right click and select run as administrator and see if that helps.  You can also check with Activision support , because this can be a problem they know. Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I'm having a problem with "Windows Installer"... Can't find a way to heal or recharge the program?

    I'm having a problem with "Windows Installer"... Impossible to find a solution to heal or recharge the program

    Hello

    1. what question do you face with Windows install on your computer?
    2. do you have an error message regarding the Windows Installer on your computer? If Yes, what is the error message?
    3. what task you were trying to do when you got the error message?
    4. have you done any software or hardware changes on your computer before this problem?

    Please refer to the section: Windows Installer issues in the following link.

    How to solve problems when you install or uninstall programs on a Windows computer

    http://support.Microsoft.com/kb/2438651/#reso1

    Further,.

    Please responses to the above questions and add additional information so that we can better guide you.

  • Problem with Windows Update after the new installation of Windows 7 Pro the Lenovo ThinkPad X 200

    I'm trying to do a fresh install of Windows 7 Pro on a Lenovo ThinkPad X 200. The product key is easy to find on the sticker of the ThinkPad. However, the version of Windows is hidden (for example, I can't check that my ThinkPad had originally installed Windows 7 Pro). I was able to install by using a Pro Win 7 SP1 CD ROM I bought for another installation. I used the ThinkPad I was trying to make the new facility on the product key. I was able to activate the Windows 7 Pro using the phone call and my cell phone. I checked the activation! However, I have problems with Windows update. The product key may be a different version of Windows 7. If so, why did it install and activate OK? Y at - it a fix for this problem or I have to buy a new version of Windows 7 Pro? Please note that I have not yet installed all drivers Lenovo ThinkPad as I can't seem to install correctly. Thank you!

    Since the issue is updated to Windows, it is not a product number key.

    You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:

    How to reset the Windows Update components

    http://support.Microsoft.com/kb/971058

    Suggest you download and save the Fixit. Then configure the system before the clean boot by running:

    How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

    http://support.Microsoft.com/kb/929135

    Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

  • Qosmio F30-114 - a problem with the installation of operating system

    Hi all
    I have a problem during the installation of operating system from the recovery disk (Win XP Media Center Edition).
    After loading the disc, I seen the installer welcome window, set up all the parameters in it and pressed the OK button.
    After that, an error has occurred (in a black console window):

    Check the type of partition MBR
    Not FOUND: Partition ID 4 is 0x00 not 0 x 88
    Seeking the TMBR
    No found TMBR!
    Fact.

    Microsoft DiskPart version 5.2.3790.1830
    Copyright (C) 1999-2001 Microsoft Corporation.
    On computer: MININT-JVC

    Disk 0 is now the selected disk.

    Services of disk management cannot complete the operation.
    Specified drive does not exist.
    ERROR: E:\04629R01 Reco-unpacking. TPA has failed!
    Press a key to continue...

    After reading this message and pressing a computer key restarts and that's all that happens.
    Also I can not install another OS (Win 7 for example), during the last part of an installation, I get a message "the work cannot be completed.".

    That's happened? I don't understand what is the reason for this problem. I was reinstall another OS (the drive recovery too) often earlier and everything was OK.

    You can install WXP using the Microsoft installation disc?
    Set the BIOS on the settings by default and to use the recovery disk again.

  • Problems with Windows Update after uninstalling SP2 (Vista Home Premium)

    Hello, everyone!

    Two days ago, I tried to install SP2 through my Windows Update. During the installation and then restart, it stopped on step 3 (0%), ignored and open Windows normally. But, I realized that I had totally lost Aero (I didn't even have the option in the window color and appearance), and also Windows Update constantly gave me the message that I always important updates - SP2 has not installed correctly (I rebooted the computer several times to try to resolve this problem, but everything remained the same: stop on step 3) ", running Windows, and once again the message that I've updated important). I searched in various forums, but could not solve the problem, so I decided to uninstall SP2 via Control Panel. But it doesn't let me do that - whenever I clicked on the button uninstall, it says that the installation is not finished yet. So, I tried the system restore, but whenever I clicked it, an error message (that I didn't understand at all) appeared. So, I went into safe mode and tried the system restore and it worked (Control Panel uninstall option does not in Mode safe either), and everything is back to SP1. But now I have problems with Windows Update - I get the error message 0 x 8007002 (and even 0 x 8007005 several times). I tried everything I could find in the forums (the thing with automated updates service does not because I don't have this option in Services), but nothing works. If anyone has any advice whatsoever, I would be really grateful for that, because I don't know what to do.

    For safety, I use NOD32 anti virus, Tall Emu Online Armor and ThreatFire.

    Thank you very much!

    Hi EvanaZgb,
    Thank you for visiting the Microsoft Answers forum.

    I would say to first disable the anti virus and other security software. Then proceed as follows:

    STEP 1
    ------------
    Download and install the latest version of Windows Installer
    To install the latest Windows Installer, visit the Microsoft Web site at the following address:
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

    Step 2 now try to update again and post back with the results
    ------------
    Cleanup, utility to download and install the Microsoft Windows CleanUp utility. To do this, see the Microsoft Web site: http://download.microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

    Now try to update again and post back with results

    Thank you

    Martin
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Problem with Windows Mail after download IE9

    Since IE9 download, I had problems with Windows Mail.  Like others, I lost the box that says, "some pictures have been blocked to help prevent the sender from identifying your computer.  Click here to download the images. "With my mail, I'm able to get a preview of the e-mail for 60 seconds before it actually opens and this is where the above 'box' appeared.  Now when I preview the email, this box is not there and I don't see one of the photos.  If I open the electronic mail, the box is there and I can click on one to see all the pictures.  The problem/question for me is I don't want to open the email to see all the pictures: I want to display them in preview mode, so I know what I'm opening!  Help!

    Questions and options can be found here.

    Internet Explorer 9 breaks the Windows Mail feature
    http://www.oehelp.com/OETips.aspx#15

  • Problem with Windows Update on the system.

    I had to recently downgrade from Windows 10 to 7 due to some performance issues. Fortunately, I had the CD supplied with the notebook (Dell inspiron 15r purchased during the year 2011 model) for the installation of windows 7 was never really a problem. Now the questions is related to uptate windows function that updates the essential windows and related windows products. He said that the search for updates and pretty page that much like that. It seems there never be never so: no change that if I leave the laptop on for hours... Is there something that can be done to address this issue?

    Hello Ganesh,

    Thank you for visiting Microsoft Community.

    As I understood it, you encounter a problem with after downgrading 10 of Windows to Windows 7, Windows Update will not work on the system.

    Certainly, I understand your concern.

    I would suggest trying the following methods and check if that helps.

    Method 1:

    I suggest you run the Windows Update Troubleshooter to check if it works. Please follow the link given below.

    Open the Windows Update troubleshooting tool

    http://Windows.Microsoft.com/en-in/Windows7/open-the-Windows-Update-Troubleshooter

    Note: The troubleshooter above checks if the network card and Windows Update services work properly.

    If the problem persists, follow method 2

    Method 2:

    I suggest you to reset manually the update of Windows components. Please follow the steps outlined in the article below and check if it works.

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

    Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    How to back up and restore the registry in Windows

    Now, you can try to run the Windows updates and check if the steps above to solve the problem.

    I hope this information is useful.

    Please let us know if you need more help, we will be happy to help you.

    Thank you.

  • Problems with the installation of new system. Need help.

    Hello

    I'm new here so I'm sorry if I posted this in the wrong section, I tried to look for this subject but nothing similar has come so I decided to create this.

    I have a HP Pavilion DV7-1020ea, which came with Windows Vista Home Premium 32 - bit installed and a recovery disk that was on the D: partition, but no real recovery disc/DVD.

    This laptop has had a hard drive failure lately, so I replaced it with a new hard drive cool (320GB, same accompanying).

    The new drive as you probably already know is fresh and it does not all partitions or any information, so without recovery of D: partition.

    I need to mention that the phone was fully functional, keyboard, touchpad, and quicklaunch worked correctly.

    I have some experience with computers, so I know how to recover, set up the startup in the bios etc.

    I tried to install Windows XP Professional 32-bit and Windows Vista Home Premium 32 - bit on my laptop but I found out that the DVD drive makes a funny (not damaged or broken), as a lack of sound recognition. The two systems of Windows are original, and I have a license for them.

    Its different when I try to install WIndows 7, the DVDs are recognized immediately. All system disks work on other computers and work quite correctly. The portable disk drive is not damaged.

    The only thing I saw was: No. Bootable Device (3FO)

    I didn't know what to do so I handed the laptop to an expert.

    When I arrived at my computer back, the computer had Windows 7 Ultimate 64 bit installed, but the problem was that quick launch buttons, keyboard and Trackpad was not working. The only way to use the computer was to plug in an external keyboard and mouse which is not a solution.

    -The keyboard not working outside not BIOS, press No button in text fields do not work. The only functions that worked were when I pressed fn + f8 to make the screen brighter and oddly enough, it worked, so when I pressed the keyboard caps lock, caps lock lights on the laptop keyboard as well.

    -The touchpad itself does not, the keypad or buttons. The only thing that works is the light that changes when I press the button disable from white to red, and then from red to white.

    -The quicklounch does not work. The works of power button (turn on the laptop since it is a button) but the led behind it does not work. For speaker and Wifi light is always red (off) and even when I touch it, it will turn blue/white. The rest has a white light behind her, but does not work.

    I also noticed that when I go into the BIOS, the bios is absolutely slow. It takes about 30 seconds to react when I press the buttons on the right, but also it does not react sometimes and it's like in all sections (but it works for keyboard).

    Later, I went to the Device Manager and discovered that there are 3 basic system devices that are not installed. I tried to install by searching online and locally, but no drivers were found.

    All devices have "the drivers for this device are not installed (Code 28)" and the drivers can be found online or on-site.

    Details of devices:

    Basic device PCI system bus 6, device 0, function 3

    Basic device PCI system bus 6, device 0, function 1

    Basic device PCI system bus 6, device 0, function 4

    Trying to fix my keyboard, the touchpad and quicklaunch buttons I went on Synaptics website to download the drivers for the touchpad, updated it, restarted, did not work. I also went on the official site of HP to download the drivers for quicklaunch to my computer, keyboard and mouse, put up-to-date, did not work.

    I also tried to put in the DVD of Vista and XP DVD to see if the computer is able too see them at all, but when I went to my computer and looked at the DVD player, it says "Insert disc in drive E:." so none of them have been recognized by the computer.

    I don't like Windows 7 and I would really like to have my laptop runs on my old system which is Windows Vista Home Premium 32-bit with keys on keyboard, keypad, tactile and functional quicklaunch.

    Could you help me then install the Vista drivers or to solve this problem?

    Tank you!

    You are the very welcome.

    See if the chipset driver installation done something to help.

    https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=816&DwnldID=20775&keyword=chipset+installation+utility&lang=eng

    It would be the only suggestion I can offer.

    I think you have a motherboard problem or something related.

  • Problems with Windows Installer, now unable to download Silverlight

    Impossible to get netflix and other applications without silverlight and can't get silverlight without windows installer. help to

    Original title: the windows installer was lost. somehow, I can 't download silverlight SUPPORT.

    Hello

    1 have had any changes made on the computer before the show?

    2 Windows operating system you are using?

    3. What is the full and exact error message?

    I suggest to consult the article and try to uninstall the program:

    Diagnose and solve the program installation and uninstallation problems automatically

    http://support.Microsoft.com/mats/Program_Install_and_Uninstall

    If the problem is not resolved, please provide more information to help you best.

  • Problems with the updates after the system recovery

    Hello.

    After about a week after the system recovery, my computer tried to install updates 110 and stuck on number 56 for more than 3 hours.

    If I disconnect the battery and restart the system stuck halfway through the Configure updates - again for several hours.

    Someone knows what's the problem?

    Regards Terry

    Hello Terry,

    Thanks for posting your question on the Microsoft community.

    Thank you for details on the issue.

    This problem can occur because corrupt Windows Update files or parameters.

    I suggest you run the Windows update troubleshooting tool and check if that helps. Please follow these steps:

    a. press Windows + C keys and click on research.

    b. type Troubleshooting in the search box, click on it in the search results.
    c. click 'show all' and then click 'Windows Update'.
    d. click on 'Next' and follow the on-screen instructions.

    If this does not help, please reset the Windows update components and check.
    Refer to this article:
    How to reset the Windows Update components?
    https://support.Microsoft.com/en-us/KB/971058

    Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
    https://support.Microsoft.com/en-us/KB/322756

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • Impossible to install a lot of programs in Windows 7, perhaps because of problem with Windows Installer

    This is a recent problem and I tried the reinstatement of Windows Installer, but it does not help.  I tried install update Windows Installer, but it wont install.

    Error messages include:
    Error 2203. Database: C:\Windows\Installer\607c93.ipi. Cannot open the database file. Error system - 2147287035.

    Or this:
    The Microsoft Windows Installer service is not accessible, or has failed.  This can occur if Windows Installer is not installed properly.  Try restarting your computer and login as administrator.  If the problem persists, visit the Microsoft Windows Support site and search for "Windows Installer problems.

    I tried to uninstall Windows Installer, but it is not like here. Then tried to reinstall Windows Installer, but it won't install no and no updates in the Knowledge Center applies to Windows 7.  In addition, there are only one account on my computer that has administrative privileges.

    Don't know if it's related, but lock began to appear everywhere in my desktop icons and many files...

    For any question on Windows 7:

    http://social.answers.Microsoft.com/forums/en-us/category/Windows7

    Link above is Windows 7 Forum for questions on Windows 7.

    Windows 7 questions should be directed to the it.

    You are in the Vista Forums.

    See you soon.

    Mick Murphy - Microsoft partner

  • Pavilion a1330n - problem with Windows Installer XP

    I had a problem with my computer and a little dialoge box popping up and saying ' Windows installed: preparing to install ' for a while now.  This window appears when I try to do something on my computer.  Is there someone out there who may be able to help me?

    Thank you

    To stop the error arise again, follow these steps:

    1 start - run - Type "services.msc".
    2. go to Windows install and then double-click Windows install.
    3. This will display 'Properties of Windows install' change to 'Manual' to 'Disable', for the ' path to the executable file: "and apply.
    4 restart the computer.

    Although I am an employee of HP, I speak for myself and not for HP

Maybe you are looking for