Problems with Windows Update and load XP SP3

I had a problem with my system and had to replace my HARD drive and reload XP and all my applications and data.  Now, I installed SP2 and try to install SP3. Windows Update does not work (get the 080244019 error code x) and when I try to install the SP3 files from the Microsoft site, it'll run about halfway through and then stop and hang, displaying the message "Finish Installation" with bar at halfway of the progression.  I tried the MSRT and FixIt nothing helps.  I checked services.msc to see all the required services are enabled or started.  I read that some malware will be stop some services without notice.

After a few attempts to load the file SP3 failed, check Add/Remove programs in Control Panel Windows XP Service Pack lists 3 but no file size or to update the date information as with other programs.  My browser is IE8 and I was doing some Hot fix for Windows XP downloads, this adventure started about 3 weeks ago, but no other automatic update downloads.  I use the following McAfee provided by my ISP for protection AV and firewall with regular full scans.  Scan today revealed there is apparently a single trojan file that cannot be deleted, but there were no further details.  My system is also fully functional; I seem to get the updates for McAfee and other applications OK but not SP3.  I received or otherwise installed following updates or Hot Fix for XP downloads in the past 3 weeks:

KB954550-v5

KB932823-v3

KB915800 v4

KB884020

KB926239

KB2618444 (Windows IE8 security update)

I found an answer on another forum on editing the registry for the "/ Edit EDWARD CSDVersion value ' but have not yet tried waiting for any response to this request.  I'd like some useful suggestions.  Thank you and happy new year!

Thanks for the quick response.  I did some checking on my system, I have XP Home Edition ships with the system bought in July 2007.  Add/Remove Programs shows that the aborted install XP SP3 and IE8 installation; I tried to load the SP2 file but it doesn't show here as an addition, so it may have been part of the original XP CD and I just crush.  Even for IE7 so I am not able to drop back to all recommend you.  I will try your solution later today and post my results. I saved SP2, SP3 and IE8 in my office and a flash player to reload later according to your instructions.  Stay tuned.

It would be unusual for a CD of Windows XP (official) to have integrated Internet Explorer 7.

Tags: Windows

Similar Questions

  • Problem with windows update and Service pack 1 for Vista 32 bit.

    A screen will appear that says I need to download the Service Pack 1 for Vista. He also says that it is more optimal to download the much smaller file, through Windows Update, rather than on the site. But when I check the Windows Update, it did not for me to download. Update verification that history does not display it has been downloaded before, even if the other Windows updates have been. Do I need? Should I download the version + 400 MB of site or there at - it another way to download smaller files for my PC only? Any help appreciated. Thank you! Here is the text I copied and pasted pop up I got.

    ------------------------------------------------------------------------------------
     
    A problem with Windows Vista
    Windows Vista has stopped working properly.

    This problem has been corrected in Windows Vista Service Pack 1 (SP1).

    What is a service pack?

    An update to software that combines new security and performance with existing updates improvements. Service packs can contain new features or changes to the design of a product.

    To resolve this issue, follow these steps:
    Determine if your type of operating system 32-bit or 64-bit.

    How will I know if my system type is 32-bit or 64-bit?

    Click the Start button, right-click computer, and then click Properties.

    Under system, you can view the system type.

    The average of 32-bit and 64-bit?

    Both 32-bit and 64-bit refer manner that your computer (CPU) CPU processes information. The 32-bit versions and 64-bit Windows are designed for use in computers with 32-bit processors or 64-bit, respectively.

    For more information, go online and read this article for Windows Vista online help:

    32-bit and 64-bit Windows: frequently asked questions

    Check online at Microsoft Download Center to download and install Windows Vista Service Pack 1:

    Windows Vista Service Pack 1 for 32-bit systems
    Windows Vista Service Pack 1 for 64-bit systems
     
    -------------------------------------------------------------------------------

    In the end, P.S. - know what long and thank you in advance for taking the time to read and respond.

    In addition, unrelated question. Does anyone know why my computer would always have an icon in the lower right shows a storage device mass that I did not and when nothing is plugged into ONE of my USB remove locations?

    Ralleny,
    Regarding mass storage disks that appear, you have housing of memory card reader on your PC?  Usually they will appear like this.  I have a HP at home that has a Bay of 5 card reader to the front and I see the same type of items that you see. Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Facing problems with Windows Update and other performance issues.

    Hi, I have a Windows 7 (64 bit) for HP Pavilion dv6 laptop. Since January 5, 2014, my computer had problems. Windows Update stopped working. Whenever I try to run it, it says that the service is not running. When I try to set the agenda by running Microsoft Fix it, an error occurs. It says "Troubleshooting cannot continue because an error has occurred" and when I try to repair Microsoft Fix it with "DIAG_MATS_NETWORK_global", it does not detect any problems. The first time I met the problem was when I tried to play Minecraft; It wouldn't connect and when I tried to relog I get a "SocketException: unrecognized Windows Socket Error: 86 create." Microsoft Security Essentials has update problems as well and my Hamachi can not connect. Skype and all my other programs and video games, such as League of Legends and Maplestory all will work perfectly well. I've looked everywhere in the Microsoft Web site and cannot find a solution. Please help me solve this problem!

    Thanks, but I fixed it! I used the Microsoft Safety Scanner, and it fixed the problem. :)

  • Problem with windows update and get Vista service Pack2 installed

    I'm running Windows Vista Home premium with service pack 1 installed. I have 2.00 GB of memory and running a 32-bit operating system

    When I open some websites it comes immediately closes and you said "Internet explorer cannot open this site" then the cottage site and says '' abandoned operation. ''

    So I thought I would upgrade my system. Whenever I have shut down my computer it asks to install updates - I have let that happen, it always lists the same updates and even though it shows that they have been correctly installed. Next time I'll look in the list of updates - the same updates appear. When I try to update to Internet explorer 6 to 8 or 9 it says I need service pack 2. When I try to install service pack 2, I thought after I have started to install pack 2, service pack 1 must be installed. When I download and try to install service pack 1, it indicates that service pack 1 is already installed.

    Any ideas on how to get my internet explore updated would be greatly appreciated.

    Thank you

    I have version 6.0 (build 6001: Service Pack 1)

    My internet Explorer is:

    Version 7.0.6001.18000

    Thanks for your help.

    When downloding a new application, applet, or executable file or program msi, I always choose to SAVE them to the DESKTOP, then I make a folder and copy the downloaded file to the new folder when the program is fully downloaded, I then run my hand registered antivirus program to ensure that it is virus-free. (right click, then choose scan with "antivirus program").

    Once I know it's clean and stored safely, I disconnect from the internet, disable my antivirus program, & close all processes not essential in the Task Manager.

    Then go to the folder "New folder" and double-click the new application to install it without interference.

    Once it is installed, restart your computer to start your antivirus program and already completed process automatically and then if it needs to access the INet activation or registration, it can do so safely.

    It a new application and ask you if that's OK, you know is very well since you just installed it will say your firewall.

    I've never had a problem with failed facilities or other interference from program using this simple step-by-step process.

    Methods to download the latest service pack (VISTA SP2)

    Method 1: Turn on automatic updates (recommended for most users)

    Method 2: Check the updates on Windows Update (same method 1 but not automatic)

    Method 3: obtain the latest Windows Vista from Microsoft Download Center (full file) service pack http://support.Microsoft.com/kb/935791/#Method3 >

    (Good to use if the computer on which you want to install the service pack is not connected to the Internet)

    Go to http://technet.microsoft.com/en-us/windows/dd262148.aspx> and look right.

    Things to know about SP2 and FAQs.

    Examine them carefully and see if it meets most or all of your questions.

    You will also notice the site available for full download download which can be used instead of the Windows Update. service

    As you can see Vista SP2 contains all updates released since SP1, download via AU (automatic updates) you get only what you need, by downloading the full file all you and you have it if you like for later if you need IT.

    For Service Packs, I prefer to download the entire file and then install offline after you have prepared the system first.

    How to obtain the latest Windows Vista service pack

    http://support.Microsoft.com/kb/935791/en-us

    How to install or uninstall Internet Explorer 9 IE9

    http://Windows.Microsoft.com/en-us/Windows7/how-do-i-install-or-uninstall-Internet-Explorer-9>

    Support for Internet Explorer in this forum:

    http://answers.Microsoft.com/en-us/IE

    04/12 / 1109:16: 23 pm

  • Problems with windows update and upgrade to Windows 10

    OS: Windows 7 Ultimate 64-bit Service Pack 1

    CPU: Intel i5 24 GB ram

    Product is enabled

    1. I'm unable to install the last update of security for Silverlight.  I tried to uninstall the application, but cannot.

    I am unable to run any apps or apps problems fixit.

    They have all the same details:

    Unknown package ID

    Path: unknown

    Error code: Ox80070003

    Source: temporary files

    I doubled the verification and services:

    Background

    Windows Update

    CPP

    Windows module

    are started

    I down loaded the tool for creating Windows Media and it failed after reaching 100%

    I downloaded several programs fixit, but none works

    Where should I go from here?

    After trying several things, I finally got 10 for the windows installation.

    I had to create a new admin account and did all the updates from there.

    Thanks for your help

  • The problem with Windows update - automatic updates service won't start not (error 126)

    original title: the problem with Windows update

    Please help me to get Windows Update operational return.

    XP Media Center Edition, Version 2002, SP3

    Had a problem with "Generic host process for Win32 has encountered a problem and needs to close."  Follow-up of the instructions on this link:
    http://support.Microsoft.com/kb/931852

    Seems to have cleared the error message.  So far so good.

    However, now a Windows Update does not work.  Security Center Windows were told to go to control panel > system and use the Automatic Updates tab.  But, if I go to control panel > system, the Automatic Updates tab does not appear.

    I also went to the control panel > Services.  Tried to start the automatic updates service.  Received this error message: could not start the service automatic updates on Local computer.  Error 126: The specified module could not be found

    I already followed several instructions on this subject:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/cannot-access-Windows-automatic-update-after/aeaec175-01f4-47ed-8F97-55b854af4220

    In the thread above, I was following the post on 30 August.  According to Option A, I completed step 5 for the uninstallation of McAfee Security.  At this time, my network card has stopped working.  On the recommendation of the officer, I posted to the Malwarebytes forum.  The officer determined Malwarebytes that I don't have a malicious software.  I ended up posting on forum McAfee to get my network card works again.  Then I reinstalled McAfee and start to run Windows Update.

    I started with Option A, step 8 to reset Internet Explorer using http://support.microsoft.com/kb/923737.  The difficulty it has worked very well.

    Then Option A, step 9 says reset Windows Update using http://support.microsoft.com/kb/971058.  When I ran the difficulty in default or aggressive mode, I got an error message saying: he cannot start wuauserv.  The message asks me to verify that the user has privileges to take this step.  Well, I checked through user accounts who am the only one user set up on this PC and I have administrator privileges.  Help me please run this difficulty or recommend another way to get Windows Update works again.

    [1]... looks like you are saying that my system is so wet that a clean install is the (only?) way to go.

    [2] if I do a clean install, not only what I need to reinstall Windows and all my applications, I also have to reinstall the drivers... Etc. ?

    [3] I think I have the disks supplied with the PC system. Is it better to use than to use the recovery partitiion?

    [4A]... is there a possibility that some of [my data are] infected?

    [4] preventing me from simply infect the whole PC again?

    A1. Yes, and it was my recommendation in August, too.

    A2. Yes.

    A3. Only not really well using the restore Partition hidden to make the "destructive recovery" will include all drivers, etc., that have been installed at the factory.

    A4a. Yes, a real possibility.

    A4b. You run at least three 3 tests on the backup data before restoring one (1) with your installed & updated up-to-date anti-virus application (for example, Microsoft Security Essentials) and two 2 with good reputation, free online scans (e.g., ESET;) Bit Defender; Kaspersky; HouseCall; (F - Secure).

    If you have saved your data on CD/DVD, the disc scanner. If you have backed up your data to a flash drive, SD card, or another external drive AND KB971029 is installed, analyze the drive.

    If you have any questions or need additional help, please start a new thread in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system

    Once again, good luck!

  • I have problem with windows update

    I have problem with windows update

    and I can't find the Hebrew pack in windows update?

    I have windows 7 ultimate

    You use this procedure: http://support.microsoft.com/kb/972813 ?

    Hebrew should be available, see: http://windows.microsoft.com/en-GB/windows7/products/features/language-packs .

    All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.

  • Problems with Windows Update after uninstalling SP2 (Vista Home Premium)

    Hello, everyone!

    Two days ago, I tried to install SP2 through my Windows Update. During the installation and then restart, it stopped on step 3 (0%), ignored and open Windows normally. But, I realized that I had totally lost Aero (I didn't even have the option in the window color and appearance), and also Windows Update constantly gave me the message that I always important updates - SP2 has not installed correctly (I rebooted the computer several times to try to resolve this problem, but everything remained the same: stop on step 3) ", running Windows, and once again the message that I've updated important). I searched in various forums, but could not solve the problem, so I decided to uninstall SP2 via Control Panel. But it doesn't let me do that - whenever I clicked on the button uninstall, it says that the installation is not finished yet. So, I tried the system restore, but whenever I clicked it, an error message (that I didn't understand at all) appeared. So, I went into safe mode and tried the system restore and it worked (Control Panel uninstall option does not in Mode safe either), and everything is back to SP1. But now I have problems with Windows Update - I get the error message 0 x 8007002 (and even 0 x 8007005 several times). I tried everything I could find in the forums (the thing with automated updates service does not because I don't have this option in Services), but nothing works. If anyone has any advice whatsoever, I would be really grateful for that, because I don't know what to do.

    For safety, I use NOD32 anti virus, Tall Emu Online Armor and ThreatFire.

    Thank you very much!

    Hi EvanaZgb,
    Thank you for visiting the Microsoft Answers forum.

    I would say to first disable the anti virus and other security software. Then proceed as follows:

    STEP 1
    ------------
    Download and install the latest version of Windows Installer
    To install the latest Windows Installer, visit the Microsoft Web site at the following address:
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

    Step 2 now try to update again and post back with the results
    ------------
    Cleanup, utility to download and install the Microsoft Windows CleanUp utility. To do this, see the Microsoft Web site: http://download.microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

    Now try to update again and post back with results

    Thank you

    Martin
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Problem with Windows Update after the removal of Virus

    My operating system is Win Vista 32 bit, had some virus closed my windows updates, have a view of the white page. Checked that my services and win update is in automatic mode has started, so I don't know why my updater gives me a red x saying windows updater is turned off.  Any suggestions?

    [Original title: Windows Update]

    https://answers.Microsoft.com/en-us/protect/Forum/protect_other-protect_scanning/problem-with-Windows-Update-after-removing-virus/3a8dd279-2732-4693-88bf-f5cea4afca96>

    It makes more sense. How to reset the Windows Update components?

    Yet, as indicated in The ball , the search results links do not work. I also used several browsers and DuckDuckGo. Maybe it's because the Windows Update Agent was changed some time ago and the article is no longer valid.

    EDIT: If the OP is also struggling to access the link I suggest using repair Windows updates available from tweaking.com. I suggest also using the Registry backup of the same author before hand.

    Repair the Windows updates

    http://www.tweaking.com/content/page/repair_windows_updates.html

    Registry backup
    http://www.tweaking.com/content/page/registry_backup.html

    I hope this helps.

  • Im having a problem with windows update.

    Im having a problem with windows update. I am running windows vista.seems as it downloads the updates, but when he tries to install I have three different error codes.  80200053 80070570 - FFFFFFFE.  Help.

    The FFFFFFFE error can mean that you have a rootkit. And its blocking updates

    Download tdsskiller run it, everything it found, select cure and then restart your computer. Then try again

  • I tried with windows update and manually to download vista service pack 2, but these two don't

    I tried with windows update and manually download vistal SP2 but fails both: the process takes time and when download reaches 100% there is a message that says that the file is corrupted in the disk, I tried to check readers for bad mistakes, too, but the same problem persists.

    It may be a corrupted catalog file.  However, it can also be a corrupted system file.  In the latter case, the System File Checker may be able to fix it.  Click Start, type "cmd" in the search/Run box and right-click on the CMD icon at the top of the results pane.  Select run as administrator.  When the cmd window type "sfc/scannow" at the prompt and press ENTER.  When the scan is finished, close the cmd window.  Alternatively, you can try to install clean or safe mode boot mode.  See

    http://support.Microsoft.com/kb/331796

    The procedure should work the same for Windows 7 and Vista.

    Enter the Mode safe mode by starting the cold computer and pressing the key function F8 repeatedly as soon as the manufacturer splash screen appears.

  • problems with windows update, HP Pavilion, M9077c PC, computer locked up, said incorrect password

    The current problems with Windows update.  My son; computer s, Auto update has not ended.   Got a new set of updated the following day.  He locks up computer because now I get incorrect password message.    Discs to reboot I did before are not recognized.   All solutions?

    Hello

    I suggest you to try the steps in the following Microsoft article and check if this may help.

    How to use the system restore to log on Windows 7 or Windows Vista when you lose access to an account: http://support.microsoft.com/kb/940765/en-us

    For more information, see the following Microsoft article:

    http://support.Microsoft.com/kb/189126

    Hope the information is useful.

  • Problem with Windows Update after the new installation of Windows 7 Pro the Lenovo ThinkPad X 200

    I'm trying to do a fresh install of Windows 7 Pro on a Lenovo ThinkPad X 200. The product key is easy to find on the sticker of the ThinkPad. However, the version of Windows is hidden (for example, I can't check that my ThinkPad had originally installed Windows 7 Pro). I was able to install by using a Pro Win 7 SP1 CD ROM I bought for another installation. I used the ThinkPad I was trying to make the new facility on the product key. I was able to activate the Windows 7 Pro using the phone call and my cell phone. I checked the activation! However, I have problems with Windows update. The product key may be a different version of Windows 7. If so, why did it install and activate OK? Y at - it a fix for this problem or I have to buy a new version of Windows 7 Pro? Please note that I have not yet installed all drivers Lenovo ThinkPad as I can't seem to install correctly. Thank you!

    Since the issue is updated to Windows, it is not a product number key.

    You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:

    How to reset the Windows Update components

    http://support.Microsoft.com/kb/971058

    Suggest you download and save the Fixit. Then configure the system before the clean boot by running:

    How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

    http://support.Microsoft.com/kb/929135

    Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

  • problem with windows update - said failure to configure updates changes in recovery

    Original title: problem with windows update

    computer says failure to configure updates changes in recovery but when you check the update history, he said updates succeeded, but one of them failed its been happening every time I turn on my computer went thrus my updates or not has them and if I update my computer will fix the problem

    Hello

    Thanks for the reply.

    Have you checked by installing the update manually?

    Send more information on the update failed, code number and update KB message.

    • Press the Windows and X keys simultaneously.
    • Click on Control Panel, then click on Windows Update.
    • Click view update history.
    • Double-click the update.
  • Problems with windows update, run sfc/scannow and boot into safe mode. (Vista Home Premium)

    Hi all

    Please bear with me here that I try to explain all the questions I have with my computer right now. I'll try to explain everything that self-organization as possible, but if you need more information or file papers to provide a solution more precise, do it me know.

    To start, I use a HP Pavilion dv6000 series (dv6748us to be exact) with Windows Vista Home Premium (32 bit) installed. (Service pack 2). About 6 months ago I got this laptop from what I believe was the conflicker virus (kept forwarding pages, arrested updates and antivirus programs, etc.) and I managed to get Windows Update works again. My help and Support did not work well, it only worked in Mode without failure, so I did some research and tried a bunch of suggested corrections (update the registry, etc.) and got it work yet once again. I don't know if one of the tools that I used all by setting the Help & Support could have caused problems that I now (as I literally tried everything under the Sun until I got to work), but my Windows Update does not work properly again.

    A few weeks ago, I installed some updates and restarted the computer, but updates did not finish install on reboot. He said the usual "Configuring Updates, do not turn off your computer", but never showed percentage complete or whatever it is. It restarted, and when I open Windows Update, he said the last time I checked the updates has never been (obviously not true), and when I tried to check the updates, it jumped right to the message telling me I have to restart my computer to complete the installation of updates. She continues to do everytime I open Windows Update. From time to time, I try to restart it, just to see if it will work, and he never does.

    I spent hours trying all the solutions I could find in Google. I tried to run system update readiness tool, which seemed to run correctly (but does not solve the problem). I then tried the difficulty it for Windows Update, and it does not solve the problem. (It might be important for me to mention that I also have problems with the difficulty It Center itself, too. Individual tools like that for Windows Update is running, but the difficulty It Center program keeps giving me the error message that "a problem is preventing the troubleshooting tool to start.") I also tried to rename the pending.xml file, and then later I deleted it, after reading in another forum that you rename the file could cause system instabillity or something like that.

    Unfortunately, I can't use system restore to solve all my problems, because all my previous restore points have disappeared (I don't know if the virus wiped out them, or if the computer removed on its own) but restore points only I checked are those that have been created recently, during the time I had these problems.

    I tried running sfc/scannow nothing helped, as he continues to tell me that there is a pending repair, but repair pending never ends. I tried to use the command of /revertpendingactions of dism.exe/image:C\/cleanup-image in the command prompt of recovery center to stop it pending repairs, and that has not worked because it claims that dism.exe that does not exist / is not a valid command. No matter what I try, I can't have this pending repair or my updates to complete pending.

    I tried to boot mode safe several times as well and he hung up on crcdisk.sys when starting every time.

    Being that I can't use sfc/scannow, System Restore, or get into Safe Mode, I'm really lost as to what I should do next. I'm honestly not sure if the problems are related, but I just thought it would make sense to list them all in one place.

    Please note that I don't want to re - install Windows Vista, or don't I think I need, because the computer works very well for most. (I use it for typing this right now). I had much rather bring all the features on mine, which I believe can be achieved with the help of the right person.

    If someone could provide me with suggestions/solutions, it would be greatly appreciated! Certainly, it would relieve a lot of stress for me!

    DISM is a thing of Windows 7. First test the hardware.

    Standard hardware troubleshooting
     
     
    First to test we can the material. Material defects can appear as many software defects, that's why we need to test the material first...
     

    Follow these steps in order. Defects of memory can cause disk corruption, disk failures can cause corruption of the disk. Damaged disc causes corrupted files (which SFC may be able to fix). If you get a stop error and after return. Do not run chkdsk with faulty memory.

     
    Diagnosis of memory
    If you have not run a diagnosis of memory, please do. Click on Start - Control Panel - choose Classic view in the left pane - choose Administrative Tools - then memory diagnostic tool.
     

    S.M.A.R.T
    Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
     
    Disk in Windows drives monitor for impending failure. The function is called S.M.A.R.T. It detects an imminent failure, 30% of the time. In a type elevated command prompt (it's a single line)
     
    WMIC PATH MSStorageDriver_FailurePredictStatus /namespace:\\root\wmi get active, predictfailure, reason List
     
    If it is on will be true, otherwise on enable in the BIOS of the computer.
     
    Predict the failure must be False if everything is ok.
     
    In Vista and later if SMART failure predicted Windows prompts the user to run the backup.
     
    Run chkdsk
    In computer all your drives right click and choose Properties, then the Tools tab, and then click check now. Check the TWO boxes and then start. Reset. This will take from one day to the next.

     
    SFC
    Check the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
     
    sfc/scannow
     
    Heat
    Heat can lead to problems of this kind, and sudden restarts without crashing. Make sure that your fans are not clogged with dust.
     
    For memory diagnostic results
    Click on Start - Control Panel (and select Classic view in the left pane), select Administrative Tools and then Event Viewer , and then look in the event (Local) - Applications and Services - Microsoft - Windows - MemoryDiagnostic-results Viewer entered.
     
    Look for EventID is 1201 or 1101 and Source is MemoryDiagnostic-results

     
    Double-click the entry for more details on this entry.

    For results of Chkdsk

    Click on Start - Control Panel (and select Classic view in the left pane) choose Administrative Tools and then Event Viewer , and then look at the Application and the System will connect (under Windows logs) for entries.
     
    Look for EventID is 7 and Source disk
    Look for EventID is 11 and the Source disk
    Look for EventID is 50 , and the Source is disk
    Look for EventID is 51 and Source disk

    Look for EventID is 52 and Source disk
    Look for EventID 55 and Source is NTFS
    Look for EventID is 130 and Source is NTFS
    Look for EventID is 134 and Source is NTFS
    Look for EventID is 137 and Source is NTFS
    Look for EventID 1001 and Source is Autochk
    Look for EventID 1001 and Source is Winlogon
    Look for EventID 1001 and Source is WinInit
    Look for EventID 1001 and Source is Chkdsk
    Look for EventID is 26212 and Source is Chkdsk
    Look for EventID 26213 and Source is Chkdsk
    Look for EventID 26214 and Source is Chkdsk
    Double-click the entry for more details on this entry.
     
    PS 7 and 55 are auto repair codes where windows repair disk errors silently on the fly. 52 is the SMART warning.

     
    For the results of the SFC
    Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
     
    findstr/c: "[SR] cannot" %windir%\logs\cbs\cbs.log|more "
     
    It will be able to see which files are corrupted.
     
    To see if there
     
    findstr/c: "[SR] repair" %windir%\logs\cbs\cbs.log|more

     
    There are often false positives for small text files that Windows uses like settings.ini and desktop.ini. Ignore these.

Maybe you are looking for

  • How to change a child birthday in iCloud.

    I need help to change a birthday in icloud.

  • How to change a PDF to a .jpeg

    I have Vista Home Premium 64-bit and I scanned a document into a .pdf file, but must be changed to a .jpeg. How can I do this?Thank youAimee T

  • change the hd on probook g1 430

    I want to change with an ssd on my g1 HD 430 probook can I do this? I opened the slot on the bottom, but I see that ram slot... where is hd?

  • HP Pavilion dv6 forgotten power on password

    Apparently, I forgot the password of ignition for my laptop.  I thought that I had changed my name, but will not accept my name in any form.  The code gives me after 3 unsuccessful attempts to login is 74526866.  I want to set so that it is not NEVER

  • Cannot install creative cloud Mac!

    I click the installation inside the mac installer icon, but he did not open it do not do anything I tried several times, but not work I stop my mac and restart but still not working