Problems with Windows Update on Vista / Internet work do not

Similar Questions

• Problems with Windows Update on Vista SP1 32 - bit Error: 0x8007000D

  Two updates have been failing install for me for several weeks. I finally decided to try to understand what is happening, and I'm stumped at this point.

  The updates are:
  Update cumulative security for Internet Explorer for Windows Vista (KB969897)
  Internet Explorer 8 for Windows Vista

  These two with an error code of 0x8007000D

  I tried almost everything I can think of, scanned for virus/malware, scandisk, verification of the SFC, several difficulty different sound of Microsoft, I even cleared out / reset Windows Update with several different methods and has run the system preparation tool.

  Then, I tried to install Vista Service Pack 2, perhaps thinking that might help - would not install either.

  The ie8_main.log contains the following:

  00:00.249: started: 2009/07/21 (A, M, J) 22:15:46.875 (local)
  00:00.281: time Format in this newspaper: MM:ss.mmm (minutes: seconds.milliseconds)
  00:00.312: command line: 'C:\Windows\SoftwareDistribution\Download\Install\wuiesetup_prereq.exe' /wu
  00:00.468: INFO: checking for C:\Windows\SoftwareDistribution\Download\Install\wuiesetup_prereq.exe version: 8.0.6001.18702
  00:00.561: INFO: Package Installer Mutex acquisition
  00:00.593: INFO: operating system: Windows Workstation: 6.0.6001 (SP1)
  00:00.593: INFO: Vista the operating system detected. Service pack major: 1, minor SP: 0, name of Service pack: Service Pack 1
  00:00.608: INFO: check if you have installed the battery update service
  "00:00.608: INFO: SSU version regvalue found: ' 6.0.6002.18005.
  00:00.624: INFO: Servicing stack update found. Permanent installation
  00:00.624: INFO: check the prerequisites
  00:00.639: INFO: met prerequisites: Yes
  00:00.639: INFO: checking for C:\Program may Explorer\iexplore.exe version: 7.0.6001.18000
  00:00.655: INFO: C:\Program may Explorer\iexplore.exe version: 7.0.6001.18000
  00:00.671: INFO: check if s iexplore.exe version current is between 8.0.6001.0...
  00:00.671: INFO:... .and 8.1.0.0...
  00:00.686: INFO: version Maximum on which to run IEAK branding is: 8.1.0.0...
  00:00.686: INFO: success check iexplore.exe version. Proceed with the installation.
  00:00.702: INFO: checking for C:\Program may Explorer\iexplore.exe version: 7.0.6001.18000
  00:00.702: INFO: version for C:\Windows\system32\mshtml.dll check: 7.0.6001.18183
  00:00.717: INFO: version for C:\Windows\system32\wininet.dll check: 7.0.6001.18148
  00:11.481: INFO: EULA accepted
  00:11.497: INFO: user successfully completed the scenario WU. Exit with return code 322376503 so WU will install IE8
  00:11.497: INFO: install return value: HR = 0 x 13371337
  00:11.513: ERROR: installation exit code: 0 x 13371337 (Undefined error Code).

  and the CheckSUR.log file contains the following:

  =================================
  Preparation of control system was updated.
  Binary version 6.0.6001.22375
  Package, Version 5.0
  2009-07-21 20:03

  Checking deployment Packages

  Audit of manifest Package and catalogs.

  Checking package watchlist.

  Control of component watchlist.
  (f) CBS registry 0x8007000D Package_1_for_KB944533 error ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.1.944533 - 4_RTM_neutral_GDR enumeration child package failed, index: 9

  Verification of the packets.

  Control components store

  I tried to remove the KB944533 and get an error. I have also tried to install a copy of the KB944533 but told me that it wasn't the version appropriate for my version of Windows.

  I am at a loss and no longer know what to check. I guess that there is a corruption in the registry (or system files) associated with KB944533, but I can't figure out how to get the installation routines for give me more detailed information.

  Any help would be greatly appreciated. While my PC is functional and I have no other problems with it, I would like to be able to try IE8 at a given time.

  Thank you
  -Al

  Success!

  I finally understood what was going on. This is a damaged registry entry.

  The registry entry for the key:
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Component based Servicing\ComponentDetect\x86_microsoft-windows-ie-setup-support_31bf3856ad364e35_0.0.0.0_none_e9aaaad1a6a385a4

  content, which was supposed to be a string value entry for:
  Package_1_for_KB944533 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.1.944533 - 4_RTM_neutral_GDR

  Unfortunately, it was not of type "REG_SZ" but altered with a type of
  0 x 40000001, which was identified as a binary key.

  I could not initially remove/change the key, therefore, found some instructions on how to reset the permissions on your registry using a Microsoft tool called: subinacl

  After the race I could rename the bad registry entry and add it back in manually, by giving the appropriate string value.

  Now, I was able to install IE8, so I think everything is resolved. Going to update to Service Pack 2 for Vista soon.

• Problems with windows update on Vista

  Hello. I m leaving windows updated I have 21 updates that must be installed. Even if I chose only an update I have problems. Facilities said that everything goes well and I have to restart my pc. When you restart the pc before the connection, I receive information only: installation could not be configuret correctly and the configuration of the system is reinstalled with the last of them. No messages or specifik errorcode is given. When the pc is restarted and go into windows update, I see that the update, I had chosen luckily installed. I only have a useraccount with administrative rights.

  Hi larsolaf,

  Thanks for the response on the Microsoft answers Community Forums.

  This could happen if the system of common log (CLFS) transaction logs may be left in an inconsistent state.

  To resolve the error code follows the steps below

  Error message when you try to install a Windows Update, a hotfix or a service pack after completing the system restore in Windows Vista: "0x80071A91".

  To resolve this problem, delete the files .blf and .regtrans-ms in the folder % Windir%\System32\SMI\Store\Machine. To do this, follow these steps:

  1. Log on as an administrator.
  2. Click on start to reduce this includes this image
  3. type cmd in the Search box, right-click cmd.exe in the programs list, click run as administrator, and then click continue.
  4. At the command prompt, type the following commands. Press ENTER after each command.
     CD /d %SystemRoot%\System32\SMI\Store\Machine
     attrib s h *.
     del *.blf
     del * .regtrans-ms
  5. Restart the computer.

  After you restart the computer, the registry regenerates the deleted files. These regenerated files are in a consistent state.

  Source: http://support.microsoft.com/kb/948252

  I hope this helps.

  Let us know if you need more assistance.

  Kind regards.

  Nicolas Mathieu

  Visit ourhttp://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• problem with windows mail (using Vista) after automatic updates installed

  After the installation of the automatic update of windows I can't receive or send email on windows Messaging.  Get the box asking username and password and when I did, he asked again.  Have checked all the settings and they are as before the problem started. Is there a problem of backward compatibility with one of the windows updates?  I can access my email on the site, so is not their problem but with my computer.

  Hello

  Try the following methods:

  Method 1:

  Try to download and reinstall Windows Mail using the link:

  http://support.Microsoft.com/kb/941090

  In the link above, go to download and install the update.

  Method 2:

  Solve problems with Windows Mail

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

  Reference:

  Working with Windows Mail in Windows Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/working-with-Windows-Mail

• Problems with Windows Update after uninstalling SP2 (Vista Home Premium)

  Hello, everyone!

  Two days ago, I tried to install SP2 through my Windows Update. During the installation and then restart, it stopped on step 3 (0%), ignored and open Windows normally. But, I realized that I had totally lost Aero (I didn't even have the option in the window color and appearance), and also Windows Update constantly gave me the message that I always important updates - SP2 has not installed correctly (I rebooted the computer several times to try to resolve this problem, but everything remained the same: stop on step 3) ", running Windows, and once again the message that I've updated important). I searched in various forums, but could not solve the problem, so I decided to uninstall SP2 via Control Panel. But it doesn't let me do that - whenever I clicked on the button uninstall, it says that the installation is not finished yet. So, I tried the system restore, but whenever I clicked it, an error message (that I didn't understand at all) appeared. So, I went into safe mode and tried the system restore and it worked (Control Panel uninstall option does not in Mode safe either), and everything is back to SP1. But now I have problems with Windows Update - I get the error message 0 x 8007002 (and even 0 x 8007005 several times). I tried everything I could find in the forums (the thing with automated updates service does not because I don't have this option in Services), but nothing works. If anyone has any advice whatsoever, I would be really grateful for that, because I don't know what to do.

  For safety, I use NOD32 anti virus, Tall Emu Online Armor and ThreatFire.

  Thank you very much!

  Hi EvanaZgb,
  Thank you for visiting the Microsoft Answers forum.

  I would say to first disable the anti virus and other security software. Then proceed as follows:

  STEP 1
  ------------
  Download and install the latest version of Windows Installer
  To install the latest Windows Installer, visit the Microsoft Web site at the following address:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  Step 2 now try to update again and post back with the results
  ------------
  Cleanup, utility to download and install the Microsoft Windows CleanUp utility. To do this, see the Microsoft Web site: http://download.microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  Now try to update again and post back with results

  Thank you

  Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• The problem with Windows update - automatic updates service won't start not (error 126)

  original title: the problem with Windows update

  Please help me to get Windows Update operational return.

  XP Media Center Edition, Version 2002, SP3

  Had a problem with "Generic host process for Win32 has encountered a problem and needs to close."  Follow-up of the instructions on this link:
  http://support.Microsoft.com/kb/931852

  Seems to have cleared the error message.  So far so good.

  However, now a Windows Update does not work.  Security Center Windows were told to go to control panel > system and use the Automatic Updates tab.  But, if I go to control panel > system, the Automatic Updates tab does not appear.

  I also went to the control panel > Services.  Tried to start the automatic updates service.  Received this error message: could not start the service automatic updates on Local computer.  Error 126: The specified module could not be found

  I already followed several instructions on this subject:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/cannot-access-Windows-automatic-update-after/aeaec175-01f4-47ed-8F97-55b854af4220

  In the thread above, I was following the post on 30 August.  According to Option A, I completed step 5 for the uninstallation of McAfee Security.  At this time, my network card has stopped working.  On the recommendation of the officer, I posted to the Malwarebytes forum.  The officer determined Malwarebytes that I don't have a malicious software.  I ended up posting on forum McAfee to get my network card works again.  Then I reinstalled McAfee and start to run Windows Update.

  I started with Option A, step 8 to reset Internet Explorer using http://support.microsoft.com/kb/923737.  The difficulty it has worked very well.

  Then Option A, step 9 says reset Windows Update using http://support.microsoft.com/kb/971058.  When I ran the difficulty in default or aggressive mode, I got an error message saying: he cannot start wuauserv.  The message asks me to verify that the user has privileges to take this step.  Well, I checked through user accounts who am the only one user set up on this PC and I have administrator privileges.  Help me please run this difficulty or recommend another way to get Windows Update works again.

  [1]... looks like you are saying that my system is so wet that a clean install is the (only?) way to go.

  [2] if I do a clean install, not only what I need to reinstall Windows and all my applications, I also have to reinstall the drivers... Etc. ?

  [3] I think I have the disks supplied with the PC system. Is it better to use than to use the recovery partitiion?

  [4A]... is there a possibility that some of [my data are] infected?

  [4] preventing me from simply infect the whole PC again?

  A1. Yes, and it was my recommendation in August, too.

  A2. Yes.

  A3. Only not really well using the restore Partition hidden to make the "destructive recovery" will include all drivers, etc., that have been installed at the factory.

  A4a. Yes, a real possibility.

  A4b. You run at least three 3 tests on the backup data before restoring one (1) with your installed & updated up-to-date anti-virus application (for example, Microsoft Security Essentials) and two 2 with good reputation, free online scans (e.g., ESET;) Bit Defender; Kaspersky; HouseCall; (F - Secure).

  If you have saved your data on CD/DVD, the disc scanner. If you have backed up your data to a flash drive, SD card, or another external drive AND KB971029 is installed, analyze the drive.

  If you have any questions or need additional help, please start a new thread in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system

  Once again, good luck!

• Problem with Windows Update after the removal of Virus

  My operating system is Win Vista 32 bit, had some virus closed my windows updates, have a view of the white page. Checked that my services and win update is in automatic mode has started, so I don't know why my updater gives me a red x saying windows updater is turned off.  Any suggestions?

  [Original title: Windows Update]

  https://answers.Microsoft.com/en-us/protect/Forum/protect_other-protect_scanning/problem-with-Windows-Update-after-removing-virus/3a8dd279-2732-4693-88bf-f5cea4afca96>

  It makes more sense. How to reset the Windows Update components?

  Yet, as indicated in The ball , the search results links do not work. I also used several browsers and DuckDuckGo. Maybe it's because the Windows Update Agent was changed some time ago and the article is no longer valid.

  EDIT: If the OP is also struggling to access the link I suggest using repair Windows updates available from tweaking.com. I suggest also using the Registry backup of the same author before hand.

  Repair the Windows updates

  http://www.tweaking.com/content/page/repair_windows_updates.html

  Registry backup
  http://www.tweaking.com/content/page/registry_backup.html

  I hope this helps.

• Im having a problem with windows update.

  Im having a problem with windows update. I am running windows vista.seems as it downloads the updates, but when he tries to install I have three different error codes.  80200053 80070570 - FFFFFFFE.  Help.

  The FFFFFFFE error can mean that you have a rootkit. And its blocking updates

  Download tdsskiller run it, everything it found, select cure and then restart your computer. Then try again

• problems with windows update, HP Pavilion, M9077c PC, computer locked up, said incorrect password

  The current problems with Windows update.  My son; computer s, Auto update has not ended.   Got a new set of updated the following day.  He locks up computer because now I get incorrect password message.    Discs to reboot I did before are not recognized.   All solutions?

  Hello

  I suggest you to try the steps in the following Microsoft article and check if this may help.

  How to use the system restore to log on Windows 7 or Windows Vista when you lose access to an account: http://support.microsoft.com/kb/940765/en-us

  For more information, see the following Microsoft article:

  http://support.Microsoft.com/kb/189126

  Hope the information is useful.

• Problem with Windows Update after the new installation of Windows 7 Pro the Lenovo ThinkPad X 200

  I'm trying to do a fresh install of Windows 7 Pro on a Lenovo ThinkPad X 200. The product key is easy to find on the sticker of the ThinkPad. However, the version of Windows is hidden (for example, I can't check that my ThinkPad had originally installed Windows 7 Pro). I was able to install by using a Pro Win 7 SP1 CD ROM I bought for another installation. I used the ThinkPad I was trying to make the new facility on the product key. I was able to activate the Windows 7 Pro using the phone call and my cell phone. I checked the activation! However, I have problems with Windows update. The product key may be a different version of Windows 7. If so, why did it install and activate OK? Y at - it a fix for this problem or I have to buy a new version of Windows 7 Pro? Please note that I have not yet installed all drivers Lenovo ThinkPad as I can't seem to install correctly. Thank you!

  Since the issue is updated to Windows, it is not a product number key.

  You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:

  How to reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Suggest you download and save the Fixit. Then configure the system before the clean boot by running:

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

  http://support.Microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

• I have problem with windows update

  I have problem with windows update

  and I can't find the Hebrew pack in windows update?

  I have windows 7 ultimate

  You use this procedure: http://support.microsoft.com/kb/972813 ?

  Hebrew should be available, see: http://windows.microsoft.com/en-GB/windows7/products/features/language-packs .

  All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.

• problem with windows update - said failure to configure updates changes in recovery

  Original title: problem with windows update

  computer says failure to configure updates changes in recovery but when you check the update history, he said updates succeeded, but one of them failed its been happening every time I turn on my computer went thrus my updates or not has them and if I update my computer will fix the problem

  Hello

  Thanks for the reply.

  Have you checked by installing the update manually?

  Send more information on the update failed, code number and update KB message.

  • Press the Windows and X keys simultaneously.
  • Click on Control Panel, then click on Windows Update.
  • Click view update history.
  • Double-click the update.

• Problem with windows update and Service pack 1 for Vista 32 bit.

  A screen will appear that says I need to download the Service Pack 1 for Vista. He also says that it is more optimal to download the much smaller file, through Windows Update, rather than on the site. But when I check the Windows Update, it did not for me to download. Update verification that history does not display it has been downloaded before, even if the other Windows updates have been. Do I need? Should I download the version + 400 MB of site or there at - it another way to download smaller files for my PC only? Any help appreciated. Thank you! Here is the text I copied and pasted pop up I got.

  ------------------------------------------------------------------------------------
   
  A problem with Windows Vista
  Windows Vista has stopped working properly.

  This problem has been corrected in Windows Vista Service Pack 1 (SP1).

  What is a service pack?

  An update to software that combines new security and performance with existing updates improvements. Service packs can contain new features or changes to the design of a product.

  To resolve this issue, follow these steps:
  Determine if your type of operating system 32-bit or 64-bit.

  How will I know if my system type is 32-bit or 64-bit?

  Click the Start button, right-click computer, and then click Properties.

  Under system, you can view the system type.

  The average of 32-bit and 64-bit?

  Both 32-bit and 64-bit refer manner that your computer (CPU) CPU processes information. The 32-bit versions and 64-bit Windows are designed for use in computers with 32-bit processors or 64-bit, respectively.

  For more information, go online and read this article for Windows Vista online help:

  32-bit and 64-bit Windows: frequently asked questions

  Check online at Microsoft Download Center to download and install Windows Vista Service Pack 1:

  Windows Vista Service Pack 1 for 32-bit systems
  Windows Vista Service Pack 1 for 64-bit systems
   
  -------------------------------------------------------------------------------

  In the end, P.S. - know what long and thank you in advance for taking the time to read and respond.

  In addition, unrelated question. Does anyone know why my computer would always have an icon in the lower right shows a storage device mass that I did not and when nothing is plugged into ONE of my USB remove locations?

  Ralleny,
  Regarding mass storage disks that appear, you have housing of memory card reader on your PC?  Usually they will appear like this.  I have a HP at home that has a Bay of 5 card reader to the front and I see the same type of items that you see. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem with Windows Update - Vista Business 32 bit

  I have continuous problems with the update (classified as Important) Microsoft.NET Framework 3.5 Service Pack 1 and .NET framework.

  This update is always offered to me, but it will simply install noty but I could try

  1. Is there an any secret to work this update?
  2. Is there anything I can do Vista ignore this update and npot spend time trying to download and install it - and also for having me to disassemble the time of everyu tick selection I'll update.

  Thank you in advance.

  F F
  

  Hi Fred Furry.

  Thank you for using the Microsoft Vista answers Forum.

  You can try the following steps and check if we are able to install the update.

  1. click on start, run, type cmd and then click OK.

  2. at the command prompt, type the following commands one by one and press ENTER.

  net stop wuauserv
  regsvr32 c:\windows\system32\wuapi.dll/s
  regsvr32 c:\windows\system32\wuaueng.dll/s
  regsvr32 c:\windows\system32\wucltux.dll/s
  regsvr32 c:\windows\system32\wudriver.dll/s
  regsvr32 wups2.dll/s
  regsvr32 c:\windows\system32\wups.dll/s
  regsvr32 c:\windows\system32\wuwebv.dll/s
  net start wuauserv
  output

  Make sure you disable any security software before installing the update.

  If this does not help, follow the article to manually remove and reinstall .NET Framework on your computer

  Use the Windows Installer Cleanup utility to clean up the State of MSI database for all versions of the .NET Framework.

  And then reinstall all the versions of the .net framework by downloading manually Microsoft Web sites in the link below:

  http://support.Microsoft.com/kb/923100

  NOTE: You can download the cleanup utility mentioned in method 2 of the article mentioned above from
  http://CID-6e60f9c3f18900f8.SkyDrive.live.com/self.aspx/dotnet%20Framework/Dotnetfx%7C_cleanup%7C_tool.zip

  Let us know how it works.

  Kind regards

  Yama - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems with Windows Update! ("some settings are managed by your system administrator"?)

  I seem to have problems with my windows update. Last week when I checked to see if updates were needed that I was unable to view them because he said that "some settings are managed by your system administrator" who won't let me change the settings and the display of updates. It's my own personal computer so I am the administrator. However, this week update windows begins to function normally because there was an update available and I managed to download it, but a few days later, the windows on the screen update returned to say that "some settings are managed by your system administrator. I did a scan for spyware/adware/virus recently and I had only a low risk of adware that was detected and deleted without modification with windows update. This problem started right after that I got a warranty of software installed by Dell, I don't know if what they did could cause the problem. The system I use is Windows Vista Home Premium Service Pack 2. Any help would be greatly appreciated!

  You can see the effects of a hijackware infection. That being said...

  McAfee applications (and Norton) are known for not not upgrade (or uninstalling) itself.

  1. run this triple McAfee fix: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

  2. After completing step 3 of triple correction, manually & repeatedly update your McAfee application until you get a prompt 'no more updates'.

  3. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

  4. restart & test by...

  How will I know if my computer is up to date? :
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-can-I-tell-if-my-computer-is-up-to-date

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft