Problems with WMC Internet TV (Beta) in Vista 32-bit last month.

Okay, so for those of you who have read my previous posts on Windows Media Center related problems involving the Internet TV beta edition, you know, I've had difficulties to find a fix for a specific problem where Internet TV will not download and gives the error, "No valid, impossible to launch Application" «...» »

So a few weeks back I found a good deal on a new material and thought I would upgrade my system to a dual core to Hexa core with a new motherboard with AMD 870/850 chipset.  I added some ram DDR3 and low and behold, when I ran my system I have not had any unexpected problems when you use Windows Media Center to which has been about a month now.  That is, until today!  When exactly the same problem happened when I look one online using WMC Internet TV (beta) news.  The error just after I saw a report, at the start of the Internet TV to connect to the next story in the list after I was watching the story I wanted to.  I clicked on the button back in the upper left corner and the second that I did, my screen instead of going back to the next menu, frozen, and then the blue circle came for about 10 seconds.  I was wondering what was the program, and then the exact error even I had before with my old dual core card mother system returned to the top on the screen and it (until) worked normally.

Conclusion... no matter what Internet TV (beta) is when it is the transfer of information from the internet to the computer, is likely to damage the hardware.  The solution is to buy a new system, which I strongly think that Microsoft should pay back stop (especially when the review is pretty well the whole computer) when it occurs.

Except of course swaping on hardware is just one of a few ways to fix the same problem, which I see no answers for in all other positions on the issue.

Hi JohnDR,

1. What is the full exact error message that you receive?

It is possible that some third-party programs installed on the computer is causing the problem.

I suggest that you perform a clean boot and check.

To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

See the link below to learn more about how to clean boot.

How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

http://support.Microsoft.com/kb/929135

Reset the computer to start as usual

When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

(a) click Start, type msconfig in the search box and press ENTER.

(b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

(c) under the general tab, click the Normal startup option, and then click OK.

(d) when you are prompted to restart the computer, click on restart.

I hope this helps!

Halima S - Microsoft technical support.

Visit our Microsoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • Problems with my Dazzle DVC 170 on Vista (32 bit)

    so here's my problem.  I just got my Dazzle DVC 170 Video Creator Platinum and I have Windows Vista Home Premium and its only good with Windows XP.  So what of heres is past...
    I downloaded the software that came with my Dazzle "Instant DVD Recorder and Studio 10 QuickStart" once this has been done, I tried opening Quickstart and he says its does not work for Vista, but only for XP.  I also tried Instant DVD Recorder and it gave me an error and it says program could not start, closing or something. If, after this, I looked on Youtube to find my answer, and I found the Pinnacle Site to update the drivers.  I did all the updates of software and it did not always work for me... so after that I downloaded other software like start Video Capture and Pinnacle Studio Plus 12, when I used a start, he shut down my computer from one attack and goes into a blue screen, so I tried Pinnacle 12 Studios and did the same thing.  I tried using Windows Movie Maker and when I click the Webcam Capture, he said: it is not all the devices that are on.  I look at my Dazzle and the green lights on, what the devil? I checked Device Manager and it says its there.  But still does not work... Last thing I tried was Picasa 3.  There is a screenshot of the Option of the device... I click it and it says connect to the webcam or device and it gives me a white screen.

    I don't know what to doo more. Please answer!   IM thinking that I did something wrong with the cause of software when I plug my Dazzle in the USB port, said he is ready to use and the good to go!  but his i just could not get the software part.

    Hello
    I suggest you to uninstall Dazzle DVC 170 Video Creator Platinum including all updates related to this software and then try to install it in Windows XP compatibility mode and check.
    See also:
  • When I start my computer I get the message "Windows Live Mesh, there might be a problem with your internet connection make sure computer connection and try again, I run Windows Vista"

    I run Windows Vista.   Recently on commissioning the first thing that appears on my screen is a 'Windows Live Mesh' message, "there could be a problem with your internet connection.

    connection.   Ensure that the computer is connected to the internet and try again".

    My computer is connected to the internet, and it works very well.   How can I get rid of this annoying message.

    I tried all means to find this file on my computer, but it does not appear to be

    Can you help me please

    Mike Gray

    Hello


    Were there any changes (hardware or software) to the computer before the show?

    Perform the check and the boot if the problem persists.

    To help resolve the error and other messages, you can start Windows XP, Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    Note: Follow step 7 to reset the computer to start as usual after the boot process.

    Hope that helps.
  • Problems with the internet connection, Aspire V15 - V3 - 575G

    Hi, I bought a new laptop and have problems with the internet connection without having to install other programs.

    The problems are the following:

    • I use an ethernet cable to connect and just after passing on the laptop, there is no Internet connection at all. I have to restart the router to do.
    • When downloading or uploading brokes down at intervals of 30 seconds - 1 minute. It is not always the same. Sometimes it works 3 minutes, but it is not enough.

    He has Win10... With my old laptop with Win7, I had no such problems. I do not change ISP.

    I don't know what to do to fix it. I have not tried to uninstall Acer applications yet. Have you experienced something similar?

    Thank you very much for the reply.

    Plese try this:

    device, right-click on your network card Realtek Manager choose uninstall and tick to uninstall the software if requested, restart, and then try again to install the downloaded driver.

  • Unable to connect to the internet using my cable broadband from sky. He said that there is a problem with your internet connection.

    original title: connection to the sky

    Hi I have a dell Inspiron mini and when I put my sky broadband cable said inside connected to the internet, but when I opened a page it says there is a problem with your internet or something.i have also the wireless network connection, but I think one of my kids messed with the parameter as , I can't use the wireless setting now.so if anyone has any answers I would be grateful.

    Hi Kerry,

    I would recommend contacting Sky support with their internet service:
    One thing, you can try on your own is following the instructions in this Microsoft article and running the Fixit tool:
    I hope this helps.
  • I installed AVG 9.0 and now I get the following MSN Explorer pop up of message.__You are unable to connect to your e-mail server. There may be a problem with your Internet connection, or a problem with the mail server. Pleas try again.

    I installed AVG 9.0 and now I get the MSN Explorer pop next message.
    You can not connect to your mail server. There may be a problem with your Internet connection, or a problem with the mail server. Pleas try again.

    Sure.  Analysis of your e-mail anti-virus program:

    • Can slow to receive and send messages, or even fail.
    • Can damage files of storage for messages that you've already sent and received, making it inaccessible messages.
    • Is not necessary.  If you receive an infected attachment and try to open it, the protective device in real time of your antivirus program will block the infection.

    Here are a few web pages accurately:

    Why you don't need your anti-virus program to scan your e-mail
    The other threat email: the Corruption of files in Outlook Express
    Why some antivirus software can change the settings in e-mail programs
    Email scanning - advantages and disadvantages

  • I restored my laptop Toshiba because I had some problems with it and now my Windows Vista computer is indicating that it is 'invaild.

    RESTORED FOR LAPTOP, WINDOWS VISTA INVAILD

    Hi I'm new to these fornums

    I restored my laptop Toshiba because I had some problems with it and now my Windows Vista computer is indicating that it is 'invaild...

    I have the product key on a sticker on the bottom of the laptop, but whenever I entered the code, I also get this:

    The product key you entered will not work with this edition of Vista

    I know that most people are trying to say to activate by phone, but this option is not available

    Help, please

    Now that you have found the key and the certificate of authenticity, you must change to the key on the COA sticker - ONLY then it will activate.

  • Problems with our internet connection

    Hello, I have a all in one HP touchsmart PC (running windows 7), and he has problems with our internet connection. I dot know if it is in the right section, but this seems to be the best in the class.

    The rest of my house to connect to our router fine (iphone, iPad, computer laptop) except this PC. I CAN connect to the router, but 5 minutes or later, he has a X red on the connection and said "the settings saved on this computer do not match the requirements for the network" I looked everywhere online for this, but it remains stubbornly disconnects every time.

    I tried to delete the network and try again, but he still has a red X and the message more each time. I tried to connect and Ethernet cable, still no luck. I am very desperate to solve this problem, because it's what I use for games. Can someone help me please? It would mean the world to me if someone could help me solve this problem.

    If you don't mind keeping this Ethernet cable connected, you might have a solid connection if you come to turn off the wifi connection completely and rely only on the cable.

    Here's how:

    1. Press on + R to display the run box, type ncpa.cpl , and then press OK.
    2. Right click on the wireless network connection and choose disable.

    That's all.  You can always reactivate if you wish.

  • Problem with receiving Internet in Inspiron 3847?

    My computer is a Dell Inspiron 3847, and I noticed internet connect seems to disconnect sometimes. The only way to fix this is by unplugging completely reconnect. This isn't a problem with my internet because it only happened on my laptop. It usually happens when downloading games. I could do to solve this problem?

    Hello

    Please try in safe mode with network.

    Update BIOS and drivers. Clear the boxes for power management.

    Concerning

  • Problem installation of update KB2556532 on Windows Vista 32 bit - stops configuration stage 3 of 3

    original title; Problem installation of update KB2556532 on Windows Vista 32 bit

    I had problems for the last two months trying to install the update to windows KB2556532. I have Windows Vista 32 bit.

    I had a virus that has been cleaned of my laptop. It was windows recovery of fraud, and I don't know if this could have caused the problem at first, but after you have cleaned the virus always impossible to install this update.

    She always says that it has installed ok, but then when the computer has restarted, it is located in 'Configuring Updates step 3 of 3..' he said then that the update was not installed correctly and is back from changes.  Once the computer has booted I am prompted to install the update again.  It continues in this loop.

    Can anyone help me please with this.  I can't online solutions for this problem, I looked for a few weeks to try and fix myself.

    Unfortunately if this utility installs not it is not that there is something corrupt or prevent Windows to install correctly.

    At this point you can try to contact Microsoft through these channels: https://support.microsoft.com/oas/default.aspx?gprid=11732&st=1 to see if they can provide assistance.

  • Problem with update Internet Explore 80242006-Vista error

    Hello world!!

    I had problems with the update and that run internet explore. It's been a while since I can't watch videos on it is to say, even if I've never had such problems with any other browser. And now I can't update my system and more specifically the internet Explorer. I get an error message whenever I have try and all microsoft proposed solutions were not useful.

    The error message is 80242006 and is defined as an unknown error.

    Any ideas? Something might work! Help, please!

    my [NOD32] subscription had expired two weeks before I desided to install MSE [and] my panda subscription had expired [NOD32 has been installed]

    See...

    I can't install Microsoft Security Essentials to clean my already infected computer?
         http://social.answers.Microsoft.com/forums/en-us/msescan/thread/87058857-D181-4019-a723-efd9a49d9275

    Cleaning a compromised system
         http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

    Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

    HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "ofhttp://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista

    After the new installation, you will have the equivalent of a "new computer" in order to take care of EVERYTHING on the next page before connecting the machine to the internet or one local network (i.e. other computers) AND BEFORE to plug in a flash, SD card, or any other external drive to the computer otherwise:

    4 steps to help protect your new computer before going online
         http://www.Microsoft.com/security/pypc.aspx

    Tip: After completing the computer fully patched, download/install KB971029 manually before connecting any player external to the computer:http://support.microsoft.com/kb/971029

    NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool appropriate prior to installing the updates, Windows Service Packs or IE upgrades AND BEFORE installing your new anti-virus application.

    Norton Removal Tool
         FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

    McAfee Consumer product removal tool
         http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

    See also:

    Risks & benefits of P2P file sharing
    http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
    http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx

    Measures to help prevent spyware
    http://www.Microsoft.com/security/spyware/prevent.aspx

    Measures to help prevent computer worms
    http://www.Microsoft.com/security/worms/prevent.aspx

    Avoid fake security software!
    http://www.Microsoft.com/security/antivirus/rogue.aspx

    If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/vistarepair/threads

    If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Equium A100 - 027 PSAAQ - having problems with WiFi Internet access

    Just installed Windows XP Home edition on my Equium A100-027 (PSAAQ) Vista didn't like. Now I'm having problems with Internet access. Should what drivers I download and how to install?

    Thank you.

    Hello

    I suggest you to check the site toshiba driver
    -> http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

    You can search your machine and download the wlan drivers. If you don t know that you you just all download and install ´em, one of the drivers SHOULD work. ;)

    Welcome them

  • problems with connecting business valueapps in Windows Vista

    Have rec'd error Windows indicating that logic ValueApps has stopped working:

    Problem event name: APPCRASH

    Application name: ValueApps.exe

    Application version: 1.4.03

    Fault Module name: ValueApps.exe

    There was an automatic update 27/01/14 and, once again, 12/03/14.  I have Windows Vista (64) and have problems of interface with many business websites (online payments, for example) which I have never experienced before.

    Another file is TBverifier.dll; However, that one has not changed since 08/25/13 and don't seem to be a problem.

    What can I do to fix this?  Looks like this are updates of Conduit, Inc.

    Threads merged, but not deleted because it contains additional information about the problem of duplicate

    Hello

    Read this: http://www.shouldiremoveit.com/ValueApps-78723-program.aspx

    Led load Malware.

    Search for malware, if necessary using the safe mode with networking.

    http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
    3. Select the Safe Mode with networking with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    Once in Safe Mode with network, download and run RKill.

    RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

    http://www.bleepingcomputer.com/download/rkill/

    Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

    http://www.Malwarebytes.org/products/malwarebytes_free

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    And also scan with the free version of SUPERAntiSpyware

    http://www.SUPERAntiSpyware.com/download.html

    SUPERAntiSpyware Free Edition is 100% free and will detect and remove thousands of Spyware, Adware, Malware, Trojans, KeyLoggers, Dialers, Hi-Jackers, and worms. SUPERAntiSpyware features many unique and powerful technologies and removes spyware threats that other applications fail to remove.

    SUPERAntiSpyware Free Edition does not include blocking in real time or scheduled scan.

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    THS is a very good program to scan your system to remove adware, etc.:

    http://www.bleepingcomputer.com/download/adwcleaner/

    AdwCleaner is a program that finds and removes the Adware, toolbars, potentially unwanted programs (PUP) and browser hijackers from your computer.  Using AdwCleaner you can easily more of these types of programs for a better user experience on your computer delete and while browsing the web.

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    And just to be sure, nothing is lurking in the background:

    'TDSSKiller Rootkit Removal Utility download for free'

    http://USA.Kaspersky.com/downloads/TDSSKiller

    See you soon.

  • unknown problem with my internet connection

    Internet on my laptop (a toshiba pslc0e-00900den running windows vista) decided that he dosnt want to work more. It was working perfectly well one day and the next, just die.

    specifically, Opera internet explore and safari all return him could not load screens page when I try and open them while windows tells me that I am connected to the internet and when I click on diagnose connection problems, it does not find a problem. and the network and sharing Center says that I'm connected to the internet. and I have the computer/globe icon in the lower corner.

    What akes is this harder than two other laptops, one running vista and other Windows 7 both have no problem with the same broadband connection and I haven't touched any of the settings.

    any ideas what may have caused this fault is laptop or is internet Explorer - this something really simple that I'm missing

    I'd appreciate any help or suggestions

    Thank you very much

    Hi calum01,

    1. did you of recent changes on the computer?
    2. What is the exact error message that you receive in internet explore?
    3. do you have security software installed on the computer?

    It is possible that some third-party programs installed on the computer are blocking access to internet in normal mode.

    Method 1

    Check if the computer gets a valid IP address.

    1. open the network and sharing Center by clicking the Start button, clicking Control Panel, click network and Internet, click network and sharing Center.
    2. under connection, click view status.
    3. click on Details.
    Your computer's IP address appears in the value next to "IPV4 IP address" column.

    Continue with the steps only if the computer has a valid IP address below.

    Check if the problem persists in mode safe mode with networking.

    Steps to start in safe mode with networking

    1 restart your computer if it is running.
    2. press the F8 key after your initially on powers computer.
    3. Once you see the menu Advanced Startup Options , you can stop tapping.
    4. use the up/down arrow keys to highlight your selection.
    5. Select Safe Mode with network and press enter.
    6. you should see loading drivers and wait please.
    7. you should then be at the Welcome screen.
    8. connect to your computer using an account with administrator privileges.

    Start your computer in safe mode
    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
    Restart the computer to return to normal mode

    Method 2

    If the problem does not persist in mode safe mode with network, then perform the clean boot and check.
    To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
    See the link below to learn more about how to clean boot.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135

    Reset the computer to start as usual
    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
    1. click on Start, type msconfig in the search box and press ENTER.
    2. If you are prompted for an administrator password or for confirmation, type your password, or click continue.
    3. on the general tab, click the Normal startup option, and then click OK.
    4. When you are prompted to restart the computer, click restart.

    Method 3

    Update the drivers of network card for the last, only if you do not get a valid IP address.

    How can I update the driver for network card on the computer

    1. click on Start, click Control Panel, and then double-click System.
    2. click the tab hardware , and then click Device Manager.
    NOTE: If you are prompted for an administrator password or for confirmation, type the password, or click continue.
    3. click on network adapters to expand.
    4. under network adapters, double-click the entry for your network adapters, and then click driver .
    5. click on Update driver software.
    6. follow the Wizard update software driver to update the driver for NICs .

    Updated a hardware driver that is not working properly
    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

    I hope this helps!

    Halima S - Microsoft technical support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Problems with the internet connectivity and support

    I have a HP Pavilion Elite HPE-510y running Windows 7 service pack 1, 64-bit, and now I'm having problems with getting updates requiring internet to install. There is nothing wrong with the router of my family. I tried to put my desk right next to the router since I use a wireless connection, it did not work. Not even when I plugged the router it still didn't work. Diagnosis, troubleshooting and self-help does not identify the problems that are there. There is no sign of the virus. I tried toggling with the security, firewalls, options and reconnect to the internet. Nothing is fixed. Windows is unable to use the online services. Flash Adobe updates do not install limit I can watch YouTube amout. Norton Antivirus will not install updates with Liveupdate and difficulty of internet connectivity. I can't go through the itunes store. I can't even get the Microsoft Word dictionary. Whenever it is said, I don't have an internet connection, and I can always look up on the web, no matter how far I am. Cela and cannot load configuration error 8921-251 which. Windows updates always work for some reason any. I am at a total loss and spend nights trying to figure it out. I could really use some help.

    It seems that this Norton Security...

    «LiveUpdate_solved"in «Norton 360"»

    The article of the author "rab60" contains detailed instructions on the Live Update solution.

    You could try a more thorough search of Norton Community Forum... I do not use Norton and cannot comment on if none of the solutions work.

Maybe you are looking for